This product would be awesome if they actually sent it out with drilling templates! The majority of dodge chargers did NOT come with a spoiler, so there is jo pre-existing hardware or holes.
Using some rubbing alcohol to loosen the adhesive from the spoiler and trunk. The spoiler uses M6 bolts, I went ahead and used some M6 thread rod and red loctite to secure them to the spoiler.
Using powertools is a easy way to overtighten and pull the plastic from under wing out overtime due to wind and shaking. Washers in middle are also a good idea to add more surface area coverage, just saying 😉
Excellent video! Props to the pretty lady. I’m also looking at the LVZ style rear diffuser (VZ101710). Do y’all have a link for its install? And does it flash with the turn signals?
Did u ever add the wicker bill? Not sure if I like it with it or not. This spoiler has the extra edge/curve on the back makes me like it better without the wicker bill
Would love to see the lovers installed. I had some metal ones from willpak back in the day on my 08 and they popped off constantly, pulling off the plates no matter what I did. It’s made me very leery of putting them on my 2020.
Just an FYI when I bought my spoiler I didn’t get any hardware so you will have to go through the hassle to figure out what bolts fit, but other than that the spoiler looks great
Same none of the OEM bolts work like they say they will. Might have had a error with my wing but my bolt wholes didn't even line up either had to do some fab work make it work right.
Instead of doing all this work to take the original spoiler off I rather just buy the other wickerbill and bolt it on to the original. Faster and easier.
Does this spoiler come with the 3M and mentioned bolts? The listing on your website doesn't mention those parts. I would think for the price all of that is included. But it sounds like they aren't being shipped with either?
Thanks for the video! Although I did not receive the bolts that are supposed to come with the spoiler, even after I already reached out to VICREZ asking for them and the 3M tape. They sent me an additional package that arrived only with 3M tape, but no bolts. Can you please let me know if I can get those bolts at a hardware store so that I don't have to wait weeks to receive them?
Does this come with the hardware I saw reviews on the website that it didn’t? Also would I have to make the holes bigger like in the video with the drill bit?
hardware is included as well as the double sided tape. Due to the size of the bolts and nuts sometimes it may be misplaced or lost in transit. If that's the case you can always get in touch with us along with your order number and we would most definitely replace that for you.
I would like to see you put a widebody kit on a car that is Lowered either airbag suspension or Lowering Springs If I could see that I would by that kit with no hesitation
So do you have to drill the corners or not? You said there was some debris. Would it not have been better to clean it rather than drill and expose bare metal to the elements?
@@asakadoh8912 yes, I went down to my local O’Reilys and got a couple of bolts, you will also have to drill the 2 corner holes in your trunk like shown in the video
“The Charger Scat Pack Daytona will sell for $44,985 and roll of 275/40ZR20 All-Season Performance tires. Up front, it wears a Daytona grille badge, and there are Daytona decals on the hood, roof, and trunk, as well as a "392" fender decal.”
![[SFM] Risky Recital](http://i.ytimg.com/vi/RzNkY1_Nk3o/mqdefault.jpg)
This product would be awesome if they actually sent it out with drilling templates! The majority of dodge chargers did NOT come with a spoiler, so there is jo pre-existing hardware or holes.
Using some rubbing alcohol to loosen the adhesive from the spoiler and trunk. The spoiler uses M6 bolts, I went ahead and used some M6 thread rod and red loctite to secure them to the spoiler.
nice to see a girl working on her car!
Using powertools is a easy way to overtighten and pull the plastic from under wing out overtime due to wind and shaking. Washers in middle are also a good idea to add more surface area coverage, just saying 😉
Thank You I will let the team know :)
Can you please do a video of this spoiler and the wickerbill yall offer with it? Thanks
Amazing video!! You make it look easy! Great job! Cheers 🍻
Thanks :)
You making it look easy 👀 great job
Gracias 😇
I don't know Who I'm love with more , Her Or The Car, Don't go telling On Me Yall. MY R/T Would really be mad 😅😊😊
Debadge the Dodge off & tint rear lights. I did, looks great
Car is crashed now 🥺
Excellent video! Props to the pretty lady.
I’m also looking at the LVZ style rear diffuser (VZ101710). Do y’all have a link for its install? And does it flash with the turn signals?
Looking good 😍😍😍
Thank you! Cheers!
Are these quality checked before shipped, ive had issues with other similar style spoilers like this having bumps and uneven surfaces
No they are not! I can tell you from experience! Had to exchange my first one.
Did u ever add the wicker bill? Not sure if I like it with it or not. This spoiler has the extra edge/curve on the back makes me like it better without the wicker bill
I got this spoiler and both tips were cracked. It was very badly packaged. Fingers crossed that the replacement is better.
Were sorry your item got damaged in transit but are glad we were able to assist you in fixing this problem quickly
I think the wing needs to be higher it’s almost look the same as stock.I don’t see much difference in my opinion
Yes I do agree with you, A bit more Higher would be really dope 😍
My thoughts exact needs to be taller
Looks way to close to stock...Doesn't seem worth the money or effort to install. I love my Vicrez custom steering wheel!!!
Would love to see the lovers installed. I had some metal ones from willpak back in the day on my 08 and they popped off constantly, pulling off the plates no matter what I did. It’s made me very leery of putting them on my 2020.
Just an FYI when I bought my spoiler I didn’t get any hardware so you will have to go through the hassle to figure out what bolts fit, but other than that the spoiler looks great
Same none of the OEM bolts work like they say they will. Might have had a error with my wing but my bolt wholes didn't even line up either had to do some fab work make it work right.
@@lorenzopinzon1254 yea same here but that’s a common issue with aftermarket parts
I am sorry, we could of shipped out the hardware did you contact them?
@@sleeperkat_srt I would but I won’t need it since I already bought the hardware
Hello, may we can recompense to you somehow. Please send over your order number :)
Does the spoiler come with the plastic clips that tells you where to drill If the car has never been drilled before
Would this wing fit a Widebody Charger? It looks really nice and I would like to swap the oem spoiler.
Hello, yes it does fit :)
Like the widebody charger in the video?
No it does not, the whole don’t align properly you will have to drill new holes, the car in the video is a Widebody kit
I legit cringed each time that flathead slipped off that Bolt..!!!
Instead of doing all this work to take the original spoiler off I rather just buy the other wickerbill and bolt it on to the original. Faster and easier.
Hello Katherine just wondering how much will you charge to install that on my car ???
A reasonable price :)
Ok sounds good when can we make it happen
I have that part from you guys already
@@sleeperkat_srt the faster the better lol
@@jacobonofre1043 hit me up at IG sleeperkat_ :)
Is it stupid to get this for an sxt? I want to get a window louver and rear diffuser to but idk I’m so torn 😫
well done girl thank you!
😎
Did you add the wide body kit or you bought it like that?
we added it on
Do you guys sell the grey gas lid door decal ? That’s dope can’t find anywhere online
Does this spoiler come with the 3M and mentioned bolts? The listing on your website doesn't mention those parts. I would think for the price all of that is included. But it sounds like they aren't being shipped with either?
Hello, if you did not receive anything you can go ahead and send us an email and we will send out your hardware.
will it be safe to drive at top speed on the german autobahn with it, or could I lose the spoiler or could it even break?
Hello, whats your german speed? With a proper installation you can go any speed you want :)
@@vicrezcom thx for the reply. :)
In Germany you can legal drive as fast as you can.
The top speed I have reached with the widebody was about 180 mph.
Thanks for the video! Although I did not receive the bolts that are supposed to come with the spoiler, even after I already reached out to VICREZ asking for them and the 3M tape. They sent me an additional package that arrived only with 3M tape, but no bolts. Can you please let me know if I can get those bolts at a hardware store so that I don't have to wait weeks to receive them?
Can you please send me a email to katherined@vicrez.com
Same thing happened to me. I’m just came back from my deployment trying to put this on now and now I’m scrambling to find bolts somewhere
Does this come with the hardware I saw reviews on the website that it didn’t? Also would I have to make the holes bigger like in the video with the drill bit?
hardware is included as well as the double sided tape. Due to the size of the bolts and nuts sometimes it may be misplaced or lost in transit. If that's the case you can always get in touch with us along with your order number and we would most definitely replace that for you.
I would like to see you put a widebody kit on a car that is Lowered either airbag suspension or Lowering Springs If I could see that I would by that kit with no hesitation
I will be modifying this car from the front since it is lowered ☹️
So do you have to drill the corners or not? You said there was some debris. Would it not have been better to clean it rather than drill and expose bare metal to the elements?
Hello, its best to drill off some of it
How can i get that installed ASAP much better than the wickerbill look to me.
You can ask me over at @sleeperkat_
I have a 15 dodge charger rt with the 3 piece spoiler will the holes line up or do I need to drill new ones?
Ima try it and I'll update yall when I get it.
Awesome let us know :)
How did it go?
@@yayowickd3826 still waiting on delivery.
@@brodom4012 keep us updated on the fitment (hopefully you don’t have to drill)
@@ig9628 my fitment was off smh Im returning it
Is this spoiler wicker bill compatible
so this would fit the 2014 rt's?... I'm really wanting this!!
Yes
Would this fit a 2018 rt? stock it come with the 3 piece spoiler, would this spoiler line up with stock holes or would I need to drill new ones
It will fit! No need for new holes
you can install this spoiler even if your car does not come with one from factory correct? i know i would have to drill holes into the trunk
Hello, yes you can install it even if you do not have one :)
@@vicrezcom awesome because it just got to my
House about 10 minutes ago lmaooo
@@gnasherreacts Oh wow!
What if my trunk doesn’t have holes? Can I just use the 3m tape? Without the bolts?
You needa bolt it forsure.
So
When ordering this on the website this not with the wicker bill added?
You can add it to with your spoiler if you like
I ordered but no hardware came with my spoiler? You mention in the video.
Hello, you can send us an email and we will go ahead and send out your hardware.
that mf look good
😍️
I’m sure it will but will this fit a 21 RE Charger?
Yeah it should fit
What song is that in the end?
Gotta get it
when does it come in forged or honeycomb carbon?
Also FIRST
We are trying to see if there will be a high demand in this request to start making in in a carbon/forge style.
wow look easy to you 😲 it does comes with bolts if i order this?
No I ordered one and it only came with the spoiler
@@xmfflacox2852 thanks ,that sucks so i need to buy separately?dang
@@asakadoh8912 yes, I went down to my local O’Reilys and got a couple of bolts, you will also have to drill the 2 corner holes in your trunk like shown in the video
We can send you some hardware just call or email us if you haven’t gotten any hardware yet
@@francoperez6217 i dont have any tools ,send me the email.
Does this come in Carbon fiber?
We are starting to offer it in carbon
DAYTONA !! NOT A SCANK PACK
What are the payments and how much a month reach- out. 23
you can use Affirm for the payments on the spoiler :)
Carbon fiber?
We have one in stock that has been hydro dipped in carbon fiber finish.
I second for a real carbon fiber weave spoiler.
Will this fot on a 2019 sxt ?
they will fot and fit the SXT👀
Your a bad ass
Widebody wheels
They are on ;)
Lol customers request huh
it’s a daytona not a scatpack
“The Charger Scat Pack Daytona will sell for $44,985 and roll of 275/40ZR20 All-Season Performance tires. Up front, it wears a Daytona grille badge, and there are Daytona decals on the hood, roof, and trunk, as well as a "392" fender decal.”
Can I buy it I got 100,000 million dollars
Buy what? Sorry