Finite Antenna Array design using HFSS

Поделиться
HTML-код
  • Опубликовано: 6 янв 2025

Комментарии • 21

  • @carolinez474
    @carolinez474 3 года назад

    Very interesting, thank you. I finally understood how to use the vectors A and B. Please in yours next videos explain your steps, it would be perfect.

  • @rajatkumarjain2889
    @rajatkumarjain2889 2 года назад

    Hi can you share the link of video in which this antenna was designed before? Is the coaxial cable is serving as vias?

  • @meghjitmajumder3468
    @meghjitmajumder3468 Год назад

    How to set the inter element spacing?

  • @i_will_do_it
    @i_will_do_it 7 месяцев назад

    Is it possible to implement this practically ? Or just for analysing ?

  • @yyw2655
    @yyw2655 3 года назад +3

    why no sounds?

  • @rajatkumarjain2889
    @rajatkumarjain2889 2 года назад

    Please make a video demonstrating how a via can be created in a 3 layer surface, Ground+substrate+Patch

  • @satyaprasadmishra1280
    @satyaprasadmishra1280 2 года назад

    Sir, I am working on metamaterial absorbers.I want to create my arrays of unit cell but in my case the create array option is disabled please help.

  • @rajatkumarjain2889
    @rajatkumarjain2889 2 года назад

    If not possible to make video share any doc demonstrating this

  • @karma6716
    @karma6716 3 года назад

    Can u plz make a video on 4x4 Butler matrix using HFSS at 5.4GHz

  • @KimJones-xd5bt
    @KimJones-xd5bt Год назад

    nice

  • @MEKANAVEENAPHD
    @MEKANAVEENAPHD 2 года назад

    for me getting error sir like excitation of error is not supported

  • @Mcstan36901
    @Mcstan36901 4 года назад

    Sir, getting error of sequential solve is not allowed when solver domains are enabled.
    how to overcome?

  • @studytosuccess7351
    @studytosuccess7351 3 года назад

    getting error of sequential solve is not allowed when solver domains are enabled.
    how to overcome sir please make a video to solve this problem thank you

  • @wonderfulworld2398
    @wonderfulworld2398 4 года назад

    Sir can it using by dipole antenna?
    and where I can using "create array" in HFSS 2015?

    • @i_will_do_it
      @i_will_do_it 7 месяцев назад

      Create primary and secondary

  • @kamalpreet3944
    @kamalpreet3944 4 года назад

    How to find dimensions? Formula?

    • @emsimulation2375
      @emsimulation2375  4 года назад

      Formula you can get it from "Antenna Theory analysis and design" by Balanis or by John. D. Krauss

  • @Piku42
    @Piku42 4 года назад

    Hello Sir, Does this simulation require HPC license and distributed computing?

  • @Second69Hand
    @Second69Hand 4 года назад

    VeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVeryVery Thx