Это видео недоступно.
Сожалеем об этом.
WLTOYS 144001 Brushless Conversion (Part 1)
HTML-код
- Опубликовано: 25 авг 2020
- Hi guys and welcome back to the channel
Buy your WLTOYS 144001 here: www.banggood.c...
This conversion is now complete Part 2 is here:
• WLTOYS 144001 Brushles...
Next Giveaway will be at 1k Subscribers so be sure to hit that button to stay up to date!
***
Today we start the process of converting this great little buggy to brushless.
Now this is not the most complicated task but it can be tricky in certain areas and there are certain obstacles to overcome to actually get this thing to work correctly.
We will be using:
Racestar 3300kv Motor
Racestar 60a ESC 2-3s Capable
JX Digital Servo 17g Metal Gear PDI-1181MG
Phatbodies ATAK Body
Phatbodies GURT Wing
Contact Foams
The plan is to hopefully run this baby on 3s and see how fast it is.
Box stock 34mph can easily be achieved to will be interesting to see how fast this is on 3s!
I know i am not the first to do this conversion and many of you have already done it but thought it would be nice to document my efforts for those of you who may be interested in doing this.
There are a few issues you will face along the way including the super glued / threadlocked pinion grub screw and motor mount screws without heat you will almost certainly strip the heads.
But dont panic i will cover all this stuff in the video so be sure to watch closely.
The reason this is only part one is because i am still awaiting the servo which is currently on backorder from banggood alongside the 3s pack i intend to run.
This is a pain but not a major issue as i would rather take my time with this one and do it properly.
Guys i hope you enjoy these are great little buggies and i hope to achieve some decent speed with this one!
#WLTOYS 144001 #144001Brushless #BrushlessConversion
Cheers guys and see you on the next one!
******
So if you didn't see the speed run video check it out here:
MAX SPEED was 30.4 MPH standard electronics and tyres on stock included 2s Lipo!
• WLTOYS 144001 | The be...
in the same video i discuss why i think this buggy is the best Budget RC in the world right now!
3 essential items to do to the 144001 before you run it:
• 3 Essential Things to ...
and also some optional things you may want to do to get the very best out of this buggy:
• 3 Recommended Things t...
My RC Recommendations:
Top 3 Best RC For under $100
1) WLTOYS 144001 - uk.banggood.co...
2) WLTOYS 124019 - uk.banggood.co...
3) HBX 16889 - uk.banggood.co...
Lipo Charger: uk.banggood.co...
2s Lipo's - uk.banggood.co...
3s Lipo's - uk.banggood.co...
4s Lipo's - uk.banggood.co...
Excellent Cheap Servos:
JX 20kg - uk.banggood.co...
DSSERVO 25kg - uk.banggood.co...
Best Cheap Transmitters:
DumboRC x4 - uk.banggood.co...
DumboRC x6 - uk.banggood.co...
Be Sure to check out and follow beyondRC on Social Media!
Instagram:
/ beyondrc1
Facebook:
/ beyondrc-103925521321907
Twitter:
/ rcbeyond
Get your RC Decals here: / cmvinyl.uk
beyondRC © 2020
EARLY RELEASE! Guys as we have recently topped 500 subs thought id treat you guys to an early release! Enjoy and part 2 will be along very soon which is when we will see this baby all finished and ready for a few runs! Cheers guys and thanks for your continued support in taking beyondRC forward!
I hope you reach the 1k subs, soon!!!
do you think the 5300kv brushless motor will fit in the udi001 rc boat here a item number for the rc udi001 boat motor if you would please look at it and scroll to the thread image of the motor here's the item number 292596729868
Those are not bad motors & cheap as well, they are indeed a 380 motor internally. A number have used these same f540 motors for speed runs, most go with the 4370kv version on 3s & some have got 75mph + on this little motor. If you want more speed later fit one of the many cheap true 3650 size motors which have the larger size internals. Doing upgrades like this is great fun especially when using low cost parts, it also keeps you off of the streets so to speak. Well until you want to go & run your car. You doing a great job with your vids & good luck.
Thank you i am glad you are enjoying the vids!
I am looking forward to seeing just how fast this little thing will be its an amazing buggy for the money. I do actually have a spare 3650 motor but i want to give this one a try and see what we can achieve as it came with the ESC combo so will give it a little chance and see! Exciting stuff!!
Just found your channel looking to do this brushless upgrade to my 144001 and great content. Just subbed! 👍🏻
Awesome! Thank you!
The easiest to get the screw out, if you have to drill them out is a Left Hand Spiral Drill Bit
Buy this buggy in the UK from here: radio-controlled.co.uk/product/wltoys-144010-1-14-2-4g-4wd-high-speed-racing-brushless-rc-car-vehicle-models-75km-h/?
That should be a runner if you can keep it planted to the ground. Body paint looks great also
Got the phat bodies mk2 escort, I used carbon affect vinyl wrap as window surrounds looks sweet . I'm using the savox 0265 micro servo it's a 27.5 mm servo so it's a mm to small so I just put rubber orings around it to fill the gap and as shock resistance works perfectly metal gear 2.5kg servo .
i am very tempted to go for that servo as i am sick of waiting for banggood to deliver. Still on backorder pretty much the only thing delaying the completion of the project. Will check that savox 0265 out! Cheers
I'd love to see a picture of your car with that escort body. I've been thinking about it for awhile now.
@@kristopherdonaldson9569 there are shorts vids on my channel that show all
If you buy a new motor mount what size are the screws that connect the mount to the motor, don’t really want to try and take the old screws out and put them back in the new motor, thanks
Can't wait 👍👍
Not long mate slightly longer release date on the video but buying myself some time for something new im hoping everyone will like!
No pressure
I hope you do a great job of the brushless set up as I'm waiting to see how you have got on before starting mine. Cheers 👍
@@thedog77 The only real issues were the super glued in screws on the motor mount and pinion! No idea why they do this it just makes it harder to remove. Heat is your best friend though and outline all of this on the video so i think you will enjoy the end result. I also briefly hook the motor up and run it up on 3s and WOW! Thats all im saying it will be worth the wait and i can't wait to finish it! I have found a savox servo which i think i will go for and get this project done as i dont want it running too far into september!
I'm so excited!👍👍
Great video mate👍 can’t wait to see the next video still tempted to get one 😂
Cheers mate thought as a little treat i will release early! Just a few more bits to go then it should be good to go will be good to see how quick it is on brushless 3s! Definitely mate you will love it and enjoy it like me!
beyondRC I have wanted a buggy for awhile but never really looked as I’m into all the on road stuff
Bro fantastic upgrades, you have done a great job , I might buy another one to convert to brushless 🤔 is there any chance of putting the links for the upgrades , it sounds good. Carnt wait to see the running video 👍😎👍 really enjoyed every minute of this Video bro. 👍😎👍😁👍
Thanks man! I will stick the links on the description for anyone who needs to know. Running video out on Saturday 👍 no worries bro glad you enjoyed 😁😁😎
If someone is ordering a new motor mount, they might as well order a new pinion. You didn't have any problems getting the motor mount off of the chassis? I saw a guy use a soldering torch to get the tons of thread lock loose to get the motor mount out. I think I'd rather lose a little height and go with the LC Racing straight chassis brace and not take a chance.
i used a lot of heat to get the motor screws out of the mount and the pinion off! They use glue instead of threadlock which makes it almost impossible to do without heat! Use some heat and it will come off!
And what is the screws on the motor mount is it Phillips head or Allan keys and Willa 5300kv motor take 4s Lipo use double sided adhesive for the esc
they are phillips! BE carful running 4s on 5300kv will heat up pretty quick
@@beyondRC is it stock Phillips head screws or did you put them in the motor mount
Hey mate, I’m looking for the 3300kv motor 60a esc and servo combo bangood now do as a package I think that’s what you used here. However all the links I have say they won’t ship to uk have you got a link where I can get these parts pls same motor as you used ? It’s for the 019 but it shouldn’t make a difference if you could help me that be great wanna get the kit ordered before Xmas
Just got stuck into my brushless conversion but the screws holding the motor to the mount are not coming out, no matter how much heat i apply!.They have also rounded off. I have a new mount, but no screws now to mount the new motor. What are the screw sizes and where is the best place to get a load of spares? Cheers mate.
What size was the hex bit did you use to remove the pinion and do you think I should gone and do steel differential how did the plastic fair with the upgrade?
I cant remember but i think its either 1.5mm or 2mm. I am still running plastic and on my most recent vid did a 4s speed run to 65mph with no issues.
Hey Beyond RC could I ask for some tips I'm an RC newbie I have a Phat Bodies Gurt rear wing for my wl toys 144001 and I'm a scared of fitting it don't want to mess it up I know the 144001 has that plastic attachment with 4 holes how would you recommend doing it could you use an RC lexan body hole punch tool instead of a drill if a drill what size bit did you find correct and did you just measure the centre of the Gurt spoiler put that plastic 4 piece attachment from the 144001 on it Mark the holes in centre that way? Thanks bud
i used a drill but the correct tool is a body reamer. Thats right just plastic the plastic piece onto the spoiler find centre then mark the holes and cut/drill. easy :)
@@beyondRC as the holes are so small do you think I could get away with using a hole punch reemer and Mark and push through the plastic gentle to make a hole check the screw if it's too small just push it through a bit more using reemer only :)
Simpel quaition, can i bay your wltoys after upgrade.
Looking forward to this.im waiting on my new parts 2 build my next 1 going to do some build videos.looking good though
sounds good! Definitely do some build videos! Thanks we cover some important stuff in part 1 and hopefully once the final parts come i will have part 2 ready! Then can see how fast this little buggy is!
I just ordered one.....i have a couple losi buggies but i like this one...how fast is it stock out of box with throttle trim at 100??
I managed to get 31mph out of mine box stock! Which I think is quite respectable.
@@beyondRC ok ty..
Im so excited 😆
Part 2 will soon follow 😁😁
I'm in the middle of this modification for my two 144001's as well, so great to see yours!
My car will be
- Phatbodies ATAK body
- Phatbodies 6" GURT wing
- Adjustable motor mount
- Surpass Hobby 3650 5200kv motor
- Surpass Hobby 60A esc
- JX Digital Servo 17g Metal Gear PDI-1181MG
- Flysky FS-GT5 Radio
- All aluminum parts upgrade (red)
- All metal diffs
- Wheels are uncertain
Daughters car will be
- Phatbodies TURBO body
- Phatbodies BAT wing
- 2838 4500kv motor
- 35A ESC
- JX Digital Servo 17g Metal Gear PDI-1181MG
- FS-A3 Receiver
- Flysky FS-GT2E radio
- Pink wheels (need to find em somewhere!)
Great spec list right there! Just out of curiosity what adjustable motor mount will you be running the a959b motor mount?
Am currently still awaiting the servo which i have opted to go for the same one as you and its on back order from banggood which is slowing the final stages of the build down!
I have opted to go for stock gearing and stock mount to see how fast i can take it on stock gearing just for fun and then i will probably changed to adjustable!
@@beyondRC yes. The a959b one.
@@beyondRC sounds good that build is quite similar to my new build. my basher has the atak and I have the lc truggy wing for on that all metal and a 60a esc with 3500kv motor.i have ordered the lc racing truggy shell and wing for new build was looking at the kaboom from phat but dont like the cutting out
@@beyondRC I was also in the wait list for the servo from banggood, but luckily a local shop had them in shelf for 11$ per piece, so I cancelled my order.
@@speksih I've used the emax es3054 servo for both of mine they work really well
Where do you get your custom stickers from? cheers
Cmvinyl uk you can contact them on instagram 👍😏
@@beyondRC Cheers mate, will do .Much appreciated.
Hello, do you have the link for the foam wheels? I can't seem to find it in the description. Thanks.
The Exact foam tyres i used can be found here if you are in the UK:
FRONT: www.makeitbuildit.co.uk/foam-1-10-front-26mm-37sh-jap-carbon-51475
REAR: www.makeitbuildit.co.uk/foam-1-10-rear-30mm-37sh-jap-carbon-48189
@@beyondRC thanks bro! Also I could do with a bit of advice. Would you recommend buying the upgraded motor, esc you have used?
@@beyondRC hello again, ive bought those foam tyres, well I bought only 1 set like a dumbo. I'm buying some for the rear now, on the website the have a rear version which is 30mm. The front are 26mm. Have you got the 26mm for the front and rear (all same size)? Or did you get the 30mm for the rear?
Thanks again!
they superglued my screw on the top brace the two screws that screw into the motor mount ...couldnt add head so had a brain wave and ran the car till cutoff and it came straight off lmao ....
i think everyone has the same problem. I dont know why they use so much. Why not just use normal threadlock!
Would any 17g servo work for this?
certainly
@@beyondRC thank you, thinking of doing this convertion
Get PB lubricant. That will loosen up anything
This is true ;)
I Wonder... what's the point in buying a cheap ready to drive RC car and investing probalbly $100+ in new parts to make it professional grade? Why not buying a good car in the first place? I mean how much ist left of the WlToys after all the upgrades?
Upgrading to brushless is not making it professional grade at all. We are simply changing the power system from brushed to brushless. Many people do this when looking for more power or just as a project to work on their RC and improve on top speed.
The stock car is still intact like i said it is just the power system that i am changing.
I'm not saying this is a mod everyone has to do personally i prefer brushless which is why i am converting its quicker, lighter and more efficient than brushed.
There are many people out there who are looking to convert to brushless and i am hoping this video educated in a way or at least gives a few tips. If you own one and chose to leave it stock that is down to personal choice.
@@beyondRC If you Upgrade to brushless you need a new esc. Therefore you need a new servo and maybe a new receiver and a new remote. Or how does just dropping in a brushless motor work?
@@hasserecht3678 Correct to make this work on the 144001 you do need: Brushless motor, ESC, SERVO, Receiver & Transmitter. But you initially said im turning the buggy into professional grade which i am not. The buggy is still a $70 buggy doing this conversion will simply make more power, more speed which is what i enjoy so i hope you can appreciate that it's not for everyone and some people choose to run stock but i enjoy getting stock RC's to go faster to push them to their limits. Converting to brushless doesnt make the 144001 a professional grade RC.
@@beyondRC and you do this upgrade with toygrade rc parts for free? If not ... it's just my initial question again: why not buying a proper Hobbygrade RC car with all these components in the first place instead of investing a good amount of money in a $70 RC car? Don't get me wrong... the car is perfectly fine as it is. But man... putting so much money in this chassis? Doesn't feel right. At least for me.
If you think I'm spending a lot check out the guys getting 100mph+ they are running ESCs worth $250+ that's before motor and other costs! I get your point and it's valid its purely for purposes of entertainment and enjoyment for myself and others.
Congrats on getting the motor off, impossible for Me an same on the a959-b.
Parts take an eternity so I just buy another whole car for parts, even though the parts are stuck on the new donor,,, Ahahahaha!
Haha! Lots and lots of heat worked for me! Why WLTOYS?!! why use glue i dont get it!? It can't be that much more cheaper than normal threadlocker! Crazy!
@@beyondRC Kooks could rule like Tamiya, a revolution They kinda have already done, but Theyave let Us down on the Spares an the Huge Market They opened, squeezing the stoke down to not so good,, Gumby Middle Management runs the planet totally, how Our Lord Creator has done it. RC fanging XTC, chooses You, You have no choice, but to micro fang Dude, between meals ripping lawns up with a beer in Your hand,,, Ooh-YEEeeaa!
Do you have a link for the body?
www.phatbodies.co.uk/product/phat-bodies-atak
@@beyondRC thx
Good stuff bro
Thanks man!
Did you get taller body posts?
And where did u get tires if u dont mind...??
they are contact foams and I got them from a uk site called make it build it!
@@beyondRC ty
Where do you get the foam tires?
Contact foams 😎👍
hi man, where do you get your body kit?
phatbodies.co.uk
@@beyondRC and what model? i don find yours
@@huntingwheels7374 www.phatbodies.co.uk/product/phat-bodies-atak
Interested to see how this goes
your RC is already a rocket!!
Where can I get those wheels and tyres bro. I typed wltoys tyres in Ebay and just got stock ones.
The Exact foam tyres i used can be found here if you are in the UK (Not sure on your location):
FRONT: www.makeitbuildit.co.uk/foam-1-10-front-26mm-37sh-jap-carbon-51475
REAR: www.makeitbuildit.co.uk/foam-1-10-rear-30mm-37sh-jap-carbon-48189
Some info on the contact foams:
Contact RC tyres are manufactured by the expert engineers at Schumacher Racing in the UK. Schumacher has invested in a highly automated manufacturing process which ensures consistent high quality products. Contact RC use only the best materials and all new wheels, developed with the knowledge and experience of some of the worlds best drivers.
The fully automated hardness measurement, glueing, and truing processes mean that every single tyre produced meets the exacting high standards required by top level racers.
Good for serious racers available in different hardness mounted on Contact Carbon black rims suitable for high grip and fast tracks, Carbon rim guarantees Stiffness and best car response also with high temperatures.
Fitting: 12mm Hex
Class: On-Road Foam
Scale: 1:10
Wheel Diameter: 1.9"
@@beyondRC sounds good. I'll have to see if they have any to fit my limitless too. Thanks bro.
On
How fast do you guys think it’s going to go 🤔
Difficult to say I'm hoping 60+
beyondRC I’m building a stampede right now hoping it can go 80mph
beyondRC all parts from banggood