I'm 64 y.o. living here on the west coast of Ireland, doing up an old farmers cottage... I've done EVERYTHING, rewiring, re-plumbing, lowered all the ceilings, installed rigid insulation, I am even building my own kitchen cabinets including shaker doors .... as I said.. everything !! 😂 I also wanted to plaster my own walls too (I know... a glutton for punishment 🙄) but I knew I hadn't got the necessary experience & haven't the time to build that experience... THIS will be my method !! I've seen american vids of guys using jointing compound to do this, but then scraping most of it back off ! This looks doable for me, the professionals may have a conniption but I'll be happy to say its all my own work... 🤗 Thank you for the demo... a sub & a like from me sir... 😏 😎👍☘️🍺
Oh my god thank you. I wondered if you could roller plaster as I’ve tried it in the past and just can’t (my dad, bless him, was great at it and tried to teach me). You’ve just saved our bacon - and valuable cash and time. We’ve just bought an old cottage and there’s so much needs doing and trades are booked up til the winter. Fantastic.
I’m actually a plasterer myself from NZ I roll plaster on using a 15mm nap and this way it creates even distribution of plaster and it minimises bubbles since you and rolling it in instead of trying to use a trowel to apply it. Definitely best and easiest process for skimming in my opinion! Great video and explanation
What kind of walls do you use the technique on? Just wondering what you should do if it's a very rough wall with old plaster with lots of dents and cracks
When I roller walls with paint, I always put the roller on an extension where space allows. It saves a lot of effort and you're handling it with both hands, so with the weight of plaster on the roller, it should be even more benefit. Might give this a try.
I'm 65 and over the years have turned my hand to most things property DIY with pretty good results, but I always left plastering to the profs. But with the cost of materials and prof rates having soared, with my latest flip project I took on plastering, watched your vids and signed up to your course. My first attempt was a bathroom which I was going to fully tile so it made for a good first try. My problem was not being able to work fast enough, and my mixes were going off, on the walls and in the bucket. Speed-Skimming (your recommendation) helped. I'm now creating a fourth bedroom including reboarding a water damaged ceiling, and was leaning towards Knauf Airless which can be rolled on, in preference to Fill & Finish-ing joints and painting straight on to the plasterbourd. Having watched this vid I'm now going to go with rolling on the plaster and Speed-Skimming. Hats off to you Blane for challenging traditional techniques and giving us non-prof DIYers alternative methods.
it is important to analyze what you see; Plastering is basically 2 operations : a. spreading the Plaster onto the wall b. finishing it Operation a. is relatively simple you can use any method you wish : you can spray it, apply it with a roller or a paint dispenser, etc. The difficulty is operation b. Finishing the surface : this requires Plasterers with Very Long Experience using various tools to smooth it and to press it against the surface. There are various techniques for applying and finishing depending on the final thickness required. Viewers should not be misled : This is no easy job ; finishing a Wall requires experience, Muscle Power and the use of a multitude of techniques acquired only through long and hard work. This is no DIYers work. Various special materials and tools have been developed to simplify the work, but it needs a few years experience to produce the perfect walls. I always appreciate the incredible work and sweat that Artisans invest in producing beautiful wall finishes. These Artisans should always be identified and their work appreciated
@@robjonson629 Strange thing is all the have a go harry's are as pleased as punch with there stipple plaster finnish, ceilings are bloody hard work 99.9 people can't get it on the wall without lookin like a Roman candle. I agree in part with what you said cost and waiting time, trouble is good trowels make it look easy because they know every trick in the book like most competent tradesmen.
Thanks so much for this. Got me out of a real hole. Had 2 large ceilings to get in before the kitchen fitters came. I'm a bricklayer not plasterer, so am not fast enough or conditioned enough to do it. I had the labourer rolling it on and me following up with a speedskim and trowel. 3 hours each ceiling, even went home early. Much easier on the body as you said.
This is brilliant, I think most beginners or DIYers like myself will find this method much easier rather than trying to do the skilled technique. I've got a plastering job on a room in my house, going to try this roller method. Thanks
This is really interesting. I'm a keen DIYer who is just getting into plastering. I've done a couple of ceilings and rooms. The basic principle initially is just to get the plaster on the wall so why should the delivery method matter? Might try this on a project I'm on at the moment. This might be a better way to feather if you need to as well. Only downside is I can't see this being a good idea on a ceiling unless you want a shower with multifinish 😂
You've got skills and it's great that you openly share your knowledge and experience. I also like the fact that you are open to experimenting and even show the mistakes. Great videos, keep it up.
This is a real game changer - as I see it - just needs a thicker mopped roller to apply more material in one hit but the concept is sound !. I dare say plasterers around the world won't be too chuffed with this because it puts application in the scope of DIYers. I suspect Refina design development Team will come up with a plastering roller after watching this. Good on you though and this will certainly help avoid RSI injuries. Lets see a series on this - worth experimenting more I reckon.
Lads, I was just trying something new! I not saying it’s proven and it was in my garage. Plaster is applied this way all over Europe and it’s not going to remove the Hawk and Trowel. Just trying new things. It’s a Plastering channel where I try new tools and methods all the time - it’s my job! I’m not saying it’s better than traditional methods. Just thinking outside the box 👍
@@rickyrogerson8865 At the end of the day it's about getting material on and flattening it as quick as you can - whether you trowel it or spray it on - why not a roller ???? Yes the roller in this vid was applying too thin but if a roller could hold more material then why not..... I dare say there were quite a few people saying "B*ll*cks" to using spats and sponging at one time. Give the guy a break - he's just experimenting - nothing wrong in that !
Brilliant... Also love the speed skim. Typically on site in the UK, if you did that you would hear all the chin wagging in the shadows...but, on your own work it would be ideal. I've been a painter/decorator about 20 years and know me way around filling blades. On a private I will give that a go. Cheers
I expected some of that in the comments too. Can’t argue with the results and it’s really good news for me as I’ve loads and loads of plastering to do!
This would be handy to do big ceiling by yourself .wonder if it would all be on and 1st coat flat quicker than by trowel. Only issue would be if a client seen me pull out the roller I would be thrown off the job before I started .plus I'm really bad at cleaning rollers .tend to use once then throw out
This is something I have to test - speed and results. I don’t even know if it’s worth doing…the first test was just to see if it stuck. I must admit that I was surprised it got this far ha! More videos with tests is what’s needed I think! I’ll get on it 👍
Maybe do a larger ceiling in your garage however do half an half. Can roller and skim vs hawk and trowel. That way you would have a 50/50 comparison which by you can critique fairly. And show on video too. Interesting to watch for sure. I wouldn’t let people being close minded stop you from experimenting. You work with one company to develop something like this and you’ll live like the other half!
I do alot of painting and sometimes a customer will ask you if do some plastering as many plasterers don't really come out for 1 wall or there are bits of plastering around a house. This is an excellent method and I would use a extra long pile masonry roller sleeve to roll on the skim. 👍
Curiously wondered what might happen if you used at the end layers a low nap like a mohair gloss roller as they're for flat surfaces..I might try thick nap to start and flat nap at the final layer...it's all good fun when you take the trowel out of the equation 😊
Reading some of these comments is the reason some trades never evolve. Dinosaurs with their heads stuck up their arses. Well done for trying something new 👌🏼👏🏻
Most reskims plasterers get called to the walls are far to battered for this to work. Half the wall back to brick, distemper paint, cracking, angle beads etc rule this out completely. The one application could be new plasterboard but then if you want to DIY it, might as well use tapered board and tape and joint.
Any chance of trying this on a fked tired old wall mate? Looks promising but I would like to see it going on a pitted lath wall instead of a nice flat plastered wall.
Exactly soon as u apply it by roller on an old wall thats not as flat as the one in video u will create problems and this method will fail applied far 2 thin
Yeah, I think it’s definitely got its limitations. There’s no way it will replace the hawk and trowel but it might be useful in some situations. Let’s see - it’s my first time. I’ve got some testing to do 👍👍
Definitely a thickness issue with coats, the roller puts it on but not thick enough for my liking, you couldn’t use this to cover existing textured surfaces Artex etc…ok for a wall that’s already perfectly flat but if that’s the case you don’t need to plaster it.
It’s a great idea , I’ve tried it myself when I first started out. I would say multi finish has changed it formula over the last few years. I’ll give it another go . Brilliant 👏🏼👏🏼
I'm from the States so there might be a difference in the plasters used but I'm guessing they are not that much different. In my area veneer plaster is used quite often with the exception of less expensive homes that use drywall and drywall mud. Plaster applied to walls is typically smoothed but the ceilings are left slightly textured. I have done a few walls however leaving them with a slight texture (about the same as you were getting with the roller) and although "different" I liked the finished look after it was painted. I've always applied plaster with a trowel but it takes some skill and can get tough on your arms. After watching this I'm wondering if the veneer plasters available to me could also be applied with a roller. Is the plaster you are using a veneer plaster as well?
Wtf, unbelievable I'm a plaster and decorator of 20+ years and I've never even considered rolling on the plaster. I'm very very impressed. How did it finish up. Was it as good as it looked on camera Truly impressed I'm glad this randomly popped on my feed. I may just give this a try for a laugh this week
There are special rollers you can get for plastering, mostly used by drwall finishers to give a level 5 finish.i always knew you could roll normal plaster so was excited when i saw your video.i just think on first coat if your rolling on plaster to prefill joints with trowel first, possibly? Good video mate!
@@mrv5801 no there not.they are sort of plastic and when using with joint compound they leave a stippled effect after which u can trowel or speed skim out.check out l'outil parfait roll. Tnk me ltr.
@@keithdouglas9848 aaah i see - do u mean the black fuzzy nylon fibre plaster roller??? have u used this to apply multi-finish plaster??? guess its worth a try hey!!! LOL
@@mrv5801 exactly mate thats the one.ive only used them for tape n jointing n they work well but u need to flatten compound imediately before it sets.not sure how they work on traditional plaster but im pretty sure it wud be same effect.
All tools in the box. Right tool for the right job, But I agree wonder how or if this can be adapted to take a typical wall with 5-6mm built up in corners etc..
I have to try this … this method could change the actual process of traditional plastering … if this process was to give same results using trowel and looks good painted as well it’s a no brainier! I would actually look forward to skimming ceilings doing it that way lol
This is how some lads apply 'level5' to drylining here in NZ , I gave it a go with a mate and it went alright. I'd particularly use the roller on big ceilings
I'm now getting started on plastering, I've bought some tools I've seen on your channel. Going to start with my own house, fingers crossed. I do have a mentor f2f but your videos have been extremely helpful. Been subscribed for sometime now.
Great video! I am currently renovating my house and was going to use the Knauf Fill & Finish product, which can also be rolled on. However, the product is expensive, So if regular plaster can be rolled on as you have demonstrated, that will save me a fortune! I may have to buy you a beer or two! Lol.
Real question, have you used this method again? Also when you are applying coats how long do you wait between coats. Also guess you can skim speed straightway. Finally the 2 or 3 coats is it from the same batch of plaster ie how do you prevent the roller from drying or did it not dry. Thank you
This is a great video! I'm equally happy first that it works (or shows the potential to) and secondly that you are the youtuber with the scoop as you seem like a top lad.(yes I know other people have done this method before but you get the craic). Definitely do a follow up video as it looks like a game changer for ceilings perhaps and DIYer certainly👍
I like the idea. Try a long pile simulated sheepskin roller. They are suppose to release the materials more readily. Just a thought. The downside of rolling is it might pull any Skrim off if this was done on plasterboard.
Hi ,thanks for taking the time to make the vid,is the roller just a normal fluffy pile paint roller or a textured roller ( like scouring pad material)......thanks Tony
We Roll plaster here in Poland, The roller we use designed just for plaster, definitely speeds things up and I feel gives a good flat smooth finish. Plenty of vids out there of the process
I’ve been tempted to try this, but I just never thought it would work that well. If you could get a thicker coat on the wall this might be a practical way of applying multi finish.
Sadly with a roller you will never be to get the mix on think enough soon as u apply it with roller to an old wall that need built out it places this method will fail that wall in video was already flat and skimmed 😂 if it worked this wud have been out years ago 🙈
@@markrobson9894 Multi finish is only supposed to be around 3mm thick. If you need to build the wall out then use bonding or some sort of undercoat plaster to level out the wall before applying the final coat of plaster.
If you put a telescoping pole on the roller, that will probably be even kinder to the tendons and elbows that take such a beating when a trowel is used. Its also easier on the knees, since there is no need to stoop while rolling the lower areas.
Hi bro.., 1st of all, u have been very helpful for making all the video for beginners to learn how to plastering and i, myself as beginner have learn many thing through out ur video alot!! Thanks!!! i have 2 question regarding this vid, What type of material roller did you used and is there any prep do u make to the roller before using it?
Great idea to test. Though I did see a few lumps fly off the roller as you applied! I think the primary restriction is that a roller can only hold so much plaster? (Roller must have been heavy?) Thickness is required. All spreads here would I'm sure agree!
Polish plasterers been rolling plaster and using sponge floats years ago i remember. Good to have open mind and try different styles and technics. What ever works and gives good results is GOOD.
Looks like a good idea for fairly good walls,I’ve been plastering for 40 years +and elbows and shoulders are just about shot and i think the weight of the roller when loaded would be a killer
Pole and scuttle. 2 arms rolling on no problem. My elbow hurts and used joint compound with pole and roller. Never been brave enough to try plaster. Will now
I wonder why? Is it lifting unbalanced loads favouring one side? 🤔 I'm no stranger to laying patios for a living and brick, block and stone work. I hear it a lot builders/ plasterers doing there backs in and neck. I'm 50 but I do exercise a lot. Swim 3 hours a week, run 1.45, gym 2-3 times depending on work. I wonder did you keep fit whilst working?
yes ! haha amazing. i use wooster quick release pole for painting. i reckon 1 shot pole and 1 long pole and youd never even have to bend down once to roll the entire wall out of the bucket.
Try magic mix? Multi with a bit of bonding to make the first coat a bit more thick! 😀 Then multi on its own for the second coat 😉 Should give a bit more coverage. Luv to see you give that a go!
Good video pal. Do you always PVA before your top coat? What mix ratio would you use PVA to water and how deep are you scratching, roughly, 1-2mm? And sorry lastly, do you use dish soap or any plasticisers in any of your mixes? Ie, base coat or top coat. Thanks
Done that years ago found it took longer need s three coats love your videos been in the game 40 years .Have you tried knocking bonding up in a mixer you’ll need a hose pipe near by worked well for me years ago .
I'm curious if the pressure from the trowel creates a more durable end result that would be lacking from a roller method...? Like, does the trowel press the particles of plaster together in a way the roller never could? (I'm asking both in regards to one particle mechanically binding to the next and also new plaster mechanically binding to the old wall by getting squished into all the keys.) But maybe the final troweling does that anyway..? in any case, this is very intriguing to me. I have an old plaster and lath house in the U.S. that’s very cracked and crumbled, and I’m trying to work up the bravery to add a new coat of plaster on everything. I’m just an average homeowner though, so the idea of learning the hawk and trowel is a little intimidating. This would be far more in my grasp. Is it more messy though?
it would be easier for u (in my opinion) to use joint compound (widely available in the USA & Canada). u can roll it on using a long nap paint roller & flatten it off using a stainless steel plastering spatula or taping knife - leaving little to no sanding if done properly. remember to stick mesh scrim tape over the existing cracks first. there r plenty of videos on youtube showing this method.
Good idea, but I bet it’s messy and probably just as labourer intensive as using a trowel. How would it work around beads and areas where it need thicker application 👍
I wanted to seal an internal wall once as they used coal soot in the mortar, that will he hidden behind units. So I created a cement/plaster mix and used a paint brush. I did try a roller but it didn't go well. Just gunged it up and wouldn't stay on the wall. Using a brush is much easier, maybe more so for a ceiling, though a slow process of course. They say plasterers suffer heart problems too after doing too many ceilings so using a pole will always be a better option if you are a professional and if not on top of preventing repetitive injuries. What is the final finish like now dry? Pits or lumps anywhere? 3 coats because each was thinner than usual? Thistle actually say apply 1mm at a time on the packet when I always thought it was 2+1 and quote coverage based on only 2mm not 3. I guess it really depends on how flat the surface is to begin with but gauging how much plaster you will need for a novice isn't easy either.
Interesting how different you do it in the UK. In Denmark, painters both plaster and paint. We also don't use the same plaster, ours are much easier to apply and you can do more walls a day. You sand it down afterwards, but calculating time spent in total it's less than what you're spending. We also plaster using a spray machine to apply the plaster, we're able to cover three 50m2 houses a day when windows are covered with plastic etc. (2 man job - one spray, one spread out with a speed skim like your own)
Great, Great video!! Are you dipping your roller into a bucket or using a paint tray? Also, what size nap is the roller? I'm staring down a plaster job at my own home with sanded diamond plaster, and readily admit I suck with a trowel. I've actually used a 4 inch chip brush and believe it or not, the finish wasn't terrible at all. Certainly better than my trowel work.
Desperately need advice, I did a small bathroom ceiling, got the 1st coat of multifinish skim on then got urgently called away, now it's dried out and is a bit of a mess, I did complete the 1st coat bit theres some lines, holes, etc, Can I rescue this tommorow as I cannot address it until then ? I'm hoping I can try sand out the worst and then maybe pva and put on a 2nd coat and flatten as well as I can would this work ? Thanks so much any advice is so appreciated, only gave it a go myself as I couldn't afford a professional.
My son just bought a new house. I've done all the plumbing radiators bathroom kitchen and electrical work. Fitted new kitchen and oak flooring. The only thing left is the plastering and it's been 30 years since I did any. Done around the new back door and a little box room so far, but slow due to health and being a fossil. Tomorrow I'm going to try this and get a speedskim, I know it will make things a lot easier. Great vid and many thanks 😊
I'm not a plasterer by trade but I give it a go in a few rooms at my house. It turned out OK thanks to a speed skim but putting it on the wall was so hard. Could only use a really small trowel and at least half of it ended up on the floor. This way might look daft but for me at that time it would have saved me a lot of time and stress and effort
That would be a good method for large ceiling. Tape and jointer in America use this method. I am stronger believer in trying new ways of plastering. Useful video 👍
Hi looked ok as I've also struggled in past with tennis elbow but few question mess is one time is another ant I'd love to see you have ago on a taped boards on a celin I reckon this be messy vid
Use a roller on a pole to use 2 hands cos the roller will give you grip strain as it’s probably quite a bit heavier than just paint. I may try this method. I presume u used a different mix for each coat ?? Great vid 👍👍
Maybe try a thick pile roler next time blaine . Always trying new ways is great if its easier and less strain on body and the end result is the same then why not work smarter not harder all the best pal .
Is this as easy as it looks or is it one of those jobs that looks easy until you ( the amateur) try it ? Any info will be greatfully received as I’m renovating my new home
Having never plastered before, I’ve seen a few shorts of people using a roller, but I’ve always thought there must be some sort of catch. Seeing you do it has convinced me it works, which is a compliment to you. But more than anything, I love your humility. You could easily have stubbornly said it’s not as good as what you’ve been used to for 15 years. But you didn’t, and that shows how genuine you are.
At the end you say you carry on the process as normal, what is the process after this? Im moving to a new house and all the walls have hairline cracks everywhere using filler is too time consuming for the time we have, im wanting to do this as like a filler for the cracks in the wall, would i be able to just skim the already plastered walls 3 times and leave it at that, i just want to make the walls new and rid the hairline cracks wothout having to spend 1000s its literally every room needs doing so this is my only option i fear
Great idea 💡 I was thinking this method would be good for internal/external curves....I feel a better roller (one used for the knauf applications) would make this option more possible 😀
I’ve used sbr for years nothing wrong with sbr. You’ll find bond it pre grit is just sbr yellow coloured with grit in. Interesting video with the roller as I’ve been thinking about this because of rolling drywall compound. Glad I found this saves me experimenting 😂.
Tried this in 1992 on a Victorian stairwell.
Used a bit of random plastic to smooth it out.
Never plastered before and it looked spot on! 👍
I'm 64 y.o. living here on the west coast of Ireland, doing up an old farmers cottage... I've done EVERYTHING, rewiring, re-plumbing, lowered all the ceilings, installed rigid insulation, I am even building my own kitchen cabinets including shaker doors .... as I said.. everything !! 😂
I also wanted to plaster my own walls too (I know... a glutton for punishment 🙄) but I knew I hadn't got the necessary experience & haven't the time to build that experience... THIS will be my method !!
I've seen american vids of guys using jointing compound to do this, but then scraping most of it back off !
This looks doable for me, the professionals may have a conniption but I'll be happy to say its all my own work... 🤗
Thank you for the demo... a sub & a like from me sir... 😏
😎👍☘️🍺
Hey your living my dream
@@ciaranbyrne62 thanks Ciaran ! 😎👍☘
Oh my god thank you. I wondered if you could roller plaster as I’ve tried it in the past and just can’t (my dad, bless him, was great at it and tried to teach me).
You’ve just saved our bacon - and valuable cash and time. We’ve just bought an old cottage and there’s so much needs doing and trades are booked up til the winter.
Fantastic.
The same gestures as Medieval cathedral builders. Artisans are the backbone of society. Lovely to watch. Thank you.
I’m actually a plasterer myself from NZ
I roll plaster on using a 15mm nap and this way it creates even distribution of plaster and it minimises bubbles since you and rolling it in instead of trying to use a trowel to apply it. Definitely best and easiest process for skimming in my opinion!
Great video and explanation
What kind of walls do you use the technique on? Just wondering what you should do if it's a very rough wall with old plaster with lots of dents and cracks
Brilliant, nice one
@@learnsomethingneweveryday1539 What I would do is fill the cracks and dents first and let it set before rolling plaster to skim
Whats a nap?
Can you post the type of roller you're using please? Tell me do you think this would work with ceilings?
When I roller walls with paint, I always put the roller on an extension where space allows. It saves a lot of effort and you're handling it with both hands, so with the weight of plaster on the roller, it should be even more benefit. Might give this a try.
I'm 65 and over the years have turned my hand to most things property DIY with pretty good results, but I always left plastering to the profs. But with the cost of materials and prof rates having soared, with my latest flip project I took on plastering, watched your vids and signed up to your course. My first attempt was a bathroom which I was going to fully tile so it made for a good first try. My problem was not being able to work fast enough, and my mixes were going off, on the walls and in the bucket. Speed-Skimming (your recommendation) helped. I'm now creating a fourth bedroom including reboarding a water damaged ceiling, and was leaning towards Knauf Airless which can be rolled on, in preference to Fill & Finish-ing joints and painting straight on to the plasterbourd. Having watched this vid I'm now going to go with rolling on the plaster and Speed-Skimming. Hats off to you Blane for challenging traditional techniques and giving us non-prof DIYers alternative methods.
If the plaster is going off too quick, been there done that, try adding some retarder.
@@Billy-No-Mates-ol8nx I'll look into that. Thanks
Brilliant! Really appreciate you taking the time and effort to educate others- well done!
it is important to analyze what you see; Plastering is basically 2 operations : a. spreading the Plaster onto the wall b. finishing it
Operation a. is relatively simple you can use any method you wish : you can spray it, apply it with a roller or a paint dispenser, etc.
The difficulty is operation b. Finishing the surface : this requires Plasterers with Very Long Experience using various tools to smooth it and to press it against the surface.
There are various techniques for applying and finishing depending on the final thickness required.
Viewers should not be misled : This is no easy job ; finishing a Wall requires experience, Muscle Power and the use of a multitude of techniques acquired only through long and hard work. This is no DIYers work. Various special materials and tools have been developed to simplify the work, but it needs a few years experience to produce the perfect walls.
I always appreciate the incredible work and sweat that Artisans invest in producing beautiful wall finishes. These Artisans should always be identified and their work appreciated
Very true! It does take lots of practice to perfect
Very interesting point Roy and probably true. Well put pal 👍
@@robjonson629 Strange thing is all the have a go harry's are as pleased as punch with there stipple plaster finnish, ceilings are bloody hard work 99.9 people can't get it on the wall without lookin like a Roman candle. I agree in part with what you said cost and waiting time, trouble is good trowels make it look easy because they know every trick in the book like most competent tradesmen.
Thanks so much for this. Got me out of a real hole. Had 2 large ceilings to get in before the kitchen fitters came. I'm a bricklayer not plasterer, so am not fast enough or conditioned enough to do it. I had the labourer rolling it on and me following up with a speedskim and trowel. 3 hours each ceiling, even went home early. Much easier on the body as you said.
Do you know what type of roller you used? sponge/thick pile etc. cheers
That’s amazing mate! Fair play
I used this method this week and it worked perfectly. For my first bit of plastering it turned out great. Thanks for the excellent content!
I couldn't get a speedskim tool so just used a normal trowel and worked well.
Cool, did you dip the roll in water every time before rolling it on the wall, or just at the begining. I thought the plaster would dry up on the roll.
This is brilliant, I think most beginners or DIYers like myself will find this method much easier rather than trying to do the skilled technique. I've got a plastering job on a room in my house, going to try this roller method. Thanks
What plaster did you use?
This is really interesting. I'm a keen DIYer who is just getting into plastering. I've done a couple of ceilings and rooms.
The basic principle initially is just to get the plaster on the wall so why should the delivery method matter?
Might try this on a project I'm on at the moment.
This might be a better way to feather if you need to as well.
Only downside is I can't see this being a good idea on a ceiling unless you want a shower with multifinish 😂
You've got skills and it's great that you openly share your knowledge and experience. I also like the fact that you are open to experimenting and even show the mistakes. Great videos, keep it up.
This is a real game changer - as I see it - just needs a thicker mopped roller to apply more material in one hit but the concept is sound !. I dare say plasterers around the world won't be too chuffed with this because it puts application in the scope of DIYers. I suspect Refina design development Team will come up with a plastering roller after watching this. Good on you though and this will certainly help avoid RSI injuries. Lets see a series on this - worth experimenting more I reckon.
BOLLOCKS.. havnt got a clue what your talking about mate
Lads, I was just trying something new! I not saying it’s proven and it was in my garage. Plaster is applied this way all over Europe and it’s not going to remove the Hawk and Trowel.
Just trying new things. It’s a Plastering channel where I try new tools and methods all the time - it’s my job! I’m not saying it’s better than traditional methods.
Just thinking outside the box 👍
@@rickyrogerson8865 At the end of the day it's about getting material on and flattening it as quick as you can - whether you trowel it or spray it on - why not a roller ???? Yes the roller in this vid was applying too thin but if a roller could hold more material then why not..... I dare say there were quite a few people saying "B*ll*cks" to using spats and sponging at one time. Give the guy a break - he's just experimenting - nothing wrong in that !
@@rickyrogerson8865 07:41
@@leedavis7663 what the instructions that make you buy more product? Lol
Brilliant...
Also love the speed skim.
Typically on site in the UK, if you did that you would hear all the chin wagging in the shadows...but, on your own work it would be ideal.
I've been a painter/decorator about 20 years and know me way around filling blades.
On a private I will give that a go.
Cheers
Haha very true! But worth trying I think
I expected some of that in the comments too. Can’t argue with the results and it’s really good news for me as I’ve loads and loads of plastering to do!
great video, I've never plastered a wall before but seeing this being done with a roller gives me enough confidence to give it a go. Thank you!
Same! I want to do my walls, all I need to do is repair a few areas where it's blown.
This would be handy to do big ceiling by yourself .wonder if it would all be on and 1st coat flat quicker than by trowel. Only issue would be if a client seen me pull out the roller I would be thrown off the job before I started .plus I'm really bad at cleaning rollers .tend to use once then throw out
This is something I have to test - speed and results. I don’t even know if it’s worth doing…the first test was just to see if it stuck. I must admit that I was surprised it got this far ha!
More videos with tests is what’s needed I think! I’ll get on it 👍
@@PlasteringForBeginners make sure you test on a small ceiling first. Wouldn't want to give u extra work if it turns into an epic fail 😂👍
Haha very true 😂😂
Maybe do a larger ceiling in your garage however do half an half. Can roller and skim vs hawk and trowel.
That way you would have a 50/50 comparison which by you can critique fairly. And show on video too. Interesting to watch for sure.
I wouldn’t let people being close minded stop you from experimenting.
You work with one company to develop something like this and you’ll live like the other half!
I do alot of painting and sometimes a customer will ask you if do some plastering as many plasterers don't really come out for 1 wall or there are bits of plastering around a house. This is an excellent method and I would use a extra long pile masonry roller sleeve to roll on the skim. 👍
Curiously wondered what might happen if you used at the end layers a low nap like a mohair gloss roller as they're for flat surfaces..I might try thick nap to start and flat nap at the final layer...it's all good fun when you take the trowel out of the equation 😊
Reading some of these comments is the reason some trades never evolve. Dinosaurs with their heads stuck up their arses. Well done for trying something new 👌🏼👏🏻
That’s pretty darn good, good for you for thinking outside of the norm.
I’m going to try this myself as I need to plaster a wall in my hall.
Did you do it? I’m about to do mine
Most reskims plasterers get called to the walls are far to battered for this to work. Half the wall back to brick, distemper paint, cracking, angle beads etc rule this out completely.
The one application could be new plasterboard but then if you want to DIY it, might as well use tapered board and tape and joint.
Am a joiner i did this last year in my own house.
am not as skilled as a plaster but it went on level and I was well impressed 😅😅
Looks great, lifesaver for tired arms and holding trowel with weight on board. Thank you J
Brilliant…. Wonder if the method would work with a magic mix on an artex ceiling ?
What's a magic mix? Cheers
Any chance of trying this on a fked tired old wall mate? Looks promising but I would like to see it going on a pitted lath wall instead of a nice flat plastered wall.
Exactly soon as u apply it by roller on an old wall thats not as flat as the one in video u will create problems and this method will fail applied far 2 thin
Yeah, I think it’s definitely got its limitations. There’s no way it will replace the hawk and trowel but it might be useful in some situations.
Let’s see - it’s my first time. I’ve got some testing to do 👍👍
Definitely a thickness issue with coats, the roller puts it on but not thick enough for my liking, you couldn’t use this to cover existing textured surfaces Artex etc…ok for a wall that’s already perfectly flat but if that’s the case you don’t need to plaster it.
I think this technique is used in North America a lot to finish dry wall. they are using an easyfill equivalent rather than multifinish
It’s a great idea , I’ve tried it myself when I first started out. I would say multi finish has changed it formula over the last few years. I’ll give it another go .
Brilliant 👏🏼👏🏼
Can't wait for the full tutorial. Looks wicked for DIY home improvements.
I'm from the States so there might be a difference in the plasters used but I'm guessing they are not that much different. In my area veneer plaster is used quite often with the exception of less expensive homes that use drywall and drywall mud. Plaster applied to walls is typically smoothed but the ceilings are left slightly textured. I have done a few walls however leaving them with a slight texture (about the same as you were getting with the roller) and although "different" I liked the finished look after it was painted. I've always applied plaster with a trowel but it takes some skill and can get tough on your arms. After watching this I'm wondering if the veneer plasters available to me could also be applied with a roller. Is the plaster you are using a veneer plaster as well?
Wtf, unbelievable I'm a plaster and decorator of 20+ years and I've never even considered rolling on the plaster. I'm very very impressed. How did it finish up. Was it as good as it looked on camera
Truly impressed I'm glad this randomly popped on my feed.
I may just give this a try for a laugh this week
Been doing it in Europe and other countries round the world for years..
@@wardygroup7770 I had no idea 😂 Im genuinely impressed I have a small bathroom wall to do that I know is tiled so I might give it a go
They normally use a thicker one coat ,but its the same principle
👍👍
Genius idea and brill demonstration. Thanks.
There are special rollers you can get for plastering, mostly used by drwall finishers to give a level 5 finish.i always knew you could roll normal plaster so was excited when i saw your video.i just think on first coat if your rolling on plaster to prefill joints with trowel first, possibly? Good video mate!
which plaster roller do u mean??? the one's ive seen online (including knauf) just look like regular medium pile paint rollers!!!
@@mrv5801 no there not.they are sort of plastic and when using with joint compound they leave a stippled effect after which u can trowel or speed skim out.check out l'outil parfait roll. Tnk me ltr.
@@keithdouglas9848 aaah i see - do u mean the black fuzzy nylon fibre plaster roller???
have u used this to apply multi-finish plaster???
guess its worth a try hey!!! LOL
@@mrv5801 exactly mate thats the one.ive only used them for tape n jointing n they work well but u need to flatten compound imediately before it sets.not sure how they work on traditional plaster but im pretty sure it wud be same effect.
@@keithdouglas9848 ok great - may be worth a try i think - ive never seen rollers like that before!!! thanks for the heads up!!! 👍
Would like to see it on a slightly uneven wall. not sure if it would work as good when trying to build up certain areas ! 🤔 Worth experimenting though
All tools in the box. Right tool for the right job, But I agree wonder how or if this can be adapted to take a typical wall with 5-6mm built up in corners etc..
I have to try this … this method could change the actual process of traditional plastering … if this process was to give same results using trowel and looks good painted as well it’s a no brainier! I would actually look forward to skimming ceilings doing it that way lol
This is how some lads apply 'level5' to drylining here in NZ , I gave it a go with a mate and it went alright. I'd particularly use the roller on big ceilings
Yeah it’s big in Europe also mate 👍👍
So is this another option for finishing walls? Instead of painting use coloured plaster?
I'm now getting started on plastering, I've bought some tools I've seen on your channel. Going to start with my own house, fingers crossed. I do have a mentor f2f but your videos have been extremely helpful. Been subscribed for sometime now.
Bit more involved that just buying tools and becoming a plasterer 🤣 keep it up you keep us real spreads in work 😂😂😂😂😂
@@No-tv3nr I've actually plastered 2 walls and 1 reveal since this post was made. I'd share a photo but YT.... 7 walls to go, 3 ceilings yikes!
This guys inspired me i am repeat watching his videos To learn i have even bought my self a trowel hawk and skim blade. ❤
Great video! I am currently renovating my house and was going to use the Knauf Fill & Finish product, which can also be rolled on. However, the product is expensive, So if regular plaster can be rolled on as you have demonstrated, that will save me a fortune! I may have to buy you a beer or two! Lol.
Real question, have you used this method again?
Also when you are applying coats how long do you wait between coats.
Also guess you can skim speed straightway.
Finally the 2 or 3 coats is it from the same batch of plaster ie how do you prevent the roller from drying or did it not dry.
Thank you
I have a new project coming up and I’m going to try plastering myself. Great video and it’s given me confidence. Thank you
This is a great video!
I'm equally happy first that it works (or shows the potential to) and secondly that you are the youtuber with the scoop as you seem like a top lad.(yes I know other people have done this method before but you get the craic).
Definitely do a follow up video as it looks like a game changer for ceilings perhaps and DIYer certainly👍
Definately a game changer I am going to try this . Bless for the courage to do this video I have appreciated it Thank you.❤
I like the idea. Try a long pile simulated sheepskin roller. They are suppose to release the materials more readily. Just a thought. The downside of rolling is it might pull any Skrim off if this was done on plasterboard.
Cover scrims first should solve that problem
Hi ,thanks for taking the time to make the vid,is the roller just a normal fluffy pile paint roller or a textured roller ( like scouring pad material)......thanks Tony
We Roll plaster here in Poland, The roller we use designed just for plaster, definitely speeds things up and I feel gives a good flat smooth finish. Plenty of vids out there of the process
which plaster roller do u mean??? the one's ive seen online (including knauf) just look like regular medium pile paint rollers!!!
🤯 This a real game changer, espically for DIY'ers who already have a load of old rollers etc. Thanks again for trying and filming this Blaine 👌
😮 awesome definitely a game changer I've worked with many plasterers and I'm sure with this technique it would make the job a whole lot easier.👍👍👍👍👍
I’ve been tempted to try this, but I just never thought it would work that well. If you could get a thicker coat on the wall this might be a practical way of applying multi finish.
What aload of bollocks!!
Sadly with a roller you will never be to get the mix on think enough soon as u apply it with roller to an old wall that need built out it places this method will fail that wall in video was already flat and skimmed 😂 if it worked this wud have been out years ago 🙈
@@markrobson9894 Multi finish is only supposed to be around 3mm thick. If you need to build the wall out then use bonding or some sort of undercoat plaster to level out the wall before applying the final coat of plaster.
I think I’ll use a thicker pile next time and see how it builds out. I’ll keep testing I think 👍
If you put a telescoping pole on the roller, that will probably be even kinder to the tendons and elbows that take such a beating when a trowel is used. Its also easier on the knees, since there is no need to stoop while rolling the lower areas.
Hi bro.., 1st of all, u have been very helpful for making all the video for beginners to learn how to plastering and i, myself as beginner have learn many thing through out ur video alot!! Thanks!!! i have 2 question regarding this vid, What type of material roller did you used and is there any prep do u make to the roller before using it?
I paid a plasterer £300 yesterday for some work in my house. If Id seen this before hand I could have saved £300 !
Remarkable
Would be good to see a little series where you go on to try and improve this technique week on week
I’ll look into it my friend! Thanks for watching - really appreciate it 👍
3 coats with the roller
Great idea to test. Though I did see a few lumps fly off the roller as you applied! I think the primary restriction is that a roller can only hold so much plaster? (Roller must have been heavy?) Thickness is required. All spreads here would I'm sure agree!
Is it less work than towelling it on and is it faster? Is there any point rolling it instead of troweling it??
This is getting me tempted. I know I'm not fit enough to do the traditional method, but this might be a possibility. Big thanks.
Polish plasterers been rolling plaster and using sponge floats years ago i remember. Good to have open mind and try different styles and technics. What ever works and gives good results is GOOD.
Looks like a good idea for fairly good walls,I’ve been plastering for 40 years +and elbows and shoulders are just about shot and i think the weight of the roller when loaded would be a killer
Pole and scuttle. 2 arms rolling on no problem. My elbow hurts and used joint compound with pole and roller. Never been brave enough to try plaster. Will now
Use a pole that would solve that 👍🏾
I’m 64 and everything is knackered
I wonder why? Is it lifting unbalanced loads favouring one side? 🤔 I'm no stranger to laying patios for a living and brick, block and stone work. I hear it a lot builders/ plasterers doing there backs in and neck. I'm 50 but I do exercise a lot. Swim 3 hours a week, run 1.45, gym 2-3 times depending on work. I wonder did you keep fit whilst working?
was that a 1 inch pile roller if not try that try purdy colossus sleeve or similar very absorbent
yes ! haha amazing. i use wooster quick release pole for painting. i reckon 1 shot pole and 1 long pole and youd never even have to bend down once to roll the entire wall out of the bucket.
Blaine you mad lad, I thought this was going to go horribly wrong but what a result that roller turned out 😱
Try magic mix? Multi with a bit of bonding to make the first coat a bit more thick! 😀 Then multi on its own for the second coat 😉 Should give a bit more coverage. Luv to see you give that a go!
I do that a lot it’s good 👍
@@damianplace8198 I ment with the roller technique 😎 Nice to see it done ✔️
I’ll give it a go my friend! Thanks for the suggestion 👍
On the same vein as using a thicker roller, you can also get honeycomb type ones for applying high build on exterior walls. Might be worth a play too
Good video pal. Do you always PVA before your top coat? What mix ratio would you use PVA to water and how deep are you scratching, roughly, 1-2mm? And sorry lastly, do you use dish soap or any plasticisers in any of your mixes? Ie, base coat or top coat. Thanks
Done that years ago found it took longer need s three coats love your videos been in the game 40 years .Have you tried knocking bonding up in a mixer you’ll need a hose pipe near by worked well for me years ago .
Very interesting, a much better performed experiment than the Skill Builder one which seemed to me negative right form the start.
Is it possible to put a lime plaster onto the plaster board?
I'm curious if the pressure from the trowel creates a more durable end result that would be lacking from a roller method...? Like, does the trowel press the particles of plaster together in a way the roller never could? (I'm asking both in regards to one particle mechanically binding to the next and also new plaster mechanically binding to the old wall by getting squished into all the keys.)
But maybe the final troweling does that anyway..?
in any case, this is very intriguing to me. I have an old plaster and lath house in the U.S. that’s very cracked and crumbled, and I’m trying to work up the bravery to add a new coat of plaster on everything. I’m just an average homeowner though, so the idea of learning the hawk and trowel is a little intimidating. This would be far more in my grasp. Is it more messy though?
it would be easier for u (in my opinion) to use joint compound (widely available in the USA & Canada). u can roll it on using a long nap paint roller & flatten it off using a stainless steel plastering spatula or taping knife - leaving little to no sanding if done properly. remember to stick mesh scrim tape over the existing cracks first. there r plenty of videos on youtube showing this method.
My walls have artex on them which contains asbestos (been tested) can the roller method for plaster be used on the artex walls?
Good idea, but I bet it’s messy and probably just as labourer intensive as using a trowel. How would it work around beads and areas where it need thicker application 👍
I wanted to seal an internal wall once as they used coal soot in the mortar, that will he hidden behind units. So I created a cement/plaster mix and used a paint brush. I did try a roller but it didn't go well. Just gunged it up and wouldn't stay on the wall. Using a brush is much easier, maybe more so for a ceiling, though a slow process of course. They say plasterers suffer heart problems too after doing too many ceilings so using a pole will always be a better option if you are a professional and if not on top of preventing repetitive injuries.
What is the final finish like now dry? Pits or lumps anywhere?
3 coats because each was thinner than usual?
Thistle actually say apply 1mm at a time on the packet when I always thought it was 2+1 and quote coverage based on only 2mm not 3.
I guess it really depends on how flat the surface is to begin with but gauging how much plaster you will need for a novice isn't easy either.
Hello just wanted to ask what type of roller did you use is it a special type for plastering ? Thanks
Looks ace, gonna give it a try. How long did you wait between coats? Cheers pal
I'm trying this this morning. I usually have a plasterer in but customer is cost concuius. I used to skim but at 47 my arms wrists and elbows are shot
Interesting how different you do it in the UK. In Denmark, painters both plaster and paint. We also don't use the same plaster, ours are much easier to apply and you can do more walls a day. You sand it down afterwards, but calculating time spent in total it's less than what you're spending.
We also plaster using a spray machine to apply the plaster, we're able to cover three 50m2 houses a day when windows are covered with plastic etc. (2 man job - one spray, one spread out with a speed skim like your own)
Great, Great video!! Are you dipping your roller into a bucket or using a paint tray? Also, what size nap is the roller? I'm staring down a plaster job at my own home with sanded diamond plaster, and readily admit I suck with a trowel. I've actually used a 4 inch chip brush and believe it or not, the finish wasn't terrible at all. Certainly better than my trowel work.
Desperately need advice, I did a small bathroom ceiling, got the 1st coat of multifinish skim on then got urgently called away, now it's dried out and is a bit of a mess, I did complete the 1st coat bit theres some lines, holes, etc, Can I rescue this tommorow as I cannot address it until then ? I'm hoping I can try sand out the worst and then maybe pva and put on a 2nd coat and flatten as well as I can would this work ? Thanks so much any advice is so appreciated, only gave it a go myself as I couldn't afford a professional.
I’ve got osteoarthritis and this method means I can plaster my sons bedroom, thank you so much 😃
Wow it's look good, nice finished just need a to check how much plaster you can get on the wall, but very impressive, I definitely will try it. Thanks
My son just bought a new house. I've done all the plumbing radiators bathroom kitchen and electrical work. Fitted new kitchen and oak flooring.
The only thing left is the plastering and it's been 30 years since I did any. Done around the new back door and a little box room so far, but slow due to health and being a fossil.
Tomorrow I'm going to try this and get a speedskim, I know it will make things a lot easier.
Great vid and many thanks 😊
Are you a millionaire?
@@DocumentingReality-ol9es Wish I was, to slow now and bad health.
I'm not a plasterer by trade but I give it a go in a few rooms at my house. It turned out OK thanks to a speed skim but putting it on the wall was so hard. Could only use a really small trowel and at least half of it ended up on the floor. This way might look daft but for me at that time it would have saved me a lot of time and stress and effort
I tried it with watered down smooth coat like I saw Americans on RUclips doing...nightmare.
That would be a good method for large ceiling. Tape and jointer in America use this method. I am stronger believer in trying new ways of plastering. Useful video 👍
Hi looked ok as I've also struggled in past with tennis elbow but few question mess is one time is another ant I'd love to see you have ago on a taped boards on a celin I reckon this be messy vid
I have a lathe and plaster house....can plaster be sanded? I want to do some repairs. But I normally work with drywall. Never worked with plaster.
Might have to try this tomorrow. See whether it works with the Owd Spanish Yesos fina 😎👍
Be interested to see how well it works on a ceiling. I imagine it makes a lot of mess.
Was going to try this but could not be bothered to go and get a roller, so used a paint brush, works well too
Use a roller on a pole to use 2 hands cos the roller will give you grip strain as it’s probably quite a bit heavier than just paint. I may try this method. I presume u used a different mix for each coat ?? Great vid 👍👍
Maybe try a thick pile roler next time blaine . Always trying new ways is great if its easier and less strain on body and the end result is the same then why not work smarter not harder all the best pal .
Great idea…cheers pal. And you’re right there - I don’t want to be broken by retirement age. Thanks for watching, all the best!
Is this as easy as it looks or is it one of those jobs that looks easy until you ( the amateur) try it ? Any info will be greatfully received as I’m renovating my new home
Having never plastered before, I’ve seen a few shorts of people using a roller, but I’ve always thought there must be some sort of catch.
Seeing you do it has convinced me it works, which is a compliment to you. But more than anything, I love your humility. You could easily have stubbornly said it’s not as good as what you’ve been used to for 15 years. But you didn’t, and that shows how genuine you are.
Thank you very much mate! I really appreciate that…cheers
Would it go on with a foam roller rather than a woven roller?making it smoother to start ?
Good on you for giving it a go
At the end you say you carry on the process as normal, what is the process after this? Im moving to a new house and all the walls have hairline cracks everywhere using filler is too time consuming for the time we have, im wanting to do this as like a filler for the cracks in the wall, would i be able to just skim the already plastered walls 3 times and leave it at that, i just want to make the walls new and rid the hairline cracks wothout having to spend 1000s its literally every room needs doing so this is my only option i fear
Why did you use the plastic speed skim and not the metal one ? Thanks
Great idea 💡 I was thinking this method would be good for internal/external curves....I feel a better roller (one used for the knauf applications) would make this option more possible 😀
I’ve used sbr for years nothing wrong with sbr. You’ll find bond it pre grit is just sbr yellow coloured with grit in.
Interesting video with the roller as I’ve been thinking about this because of rolling drywall compound. Glad I found this saves me experimenting 😂.
What's is the sbr for, and do you add it into the plaster mix? Tia