12v auto cut off battery charger circuit
HTML-код
- Опубликовано: 23 окт 2021
- #12vbattery
#batterycharger
#powersupply
Auto cut off 12v battery charger
Auto cut off 12 volt battery charger circuit
12 volt battery charger with auto cut off
Auto cut off battery charger circuit
12 volt automatic battery charger
How to make 12v battery charger auto cut off
how to make auto cut off battery charger
In this video i'm showing you how to make a easy and simple Auto Cut Off Charger For 12 Volt Battery 8ah to 100ah.
There i have used few components including Relay & NPN Transistor.
Input voltage should be fixed at 14.5v
and when battery voltage will reach to 13.9 volts, circuit will automatically Cutoff the charging supply to battery and saves battery from over charging.
This circuit is designed to give beep sound also to indicate battery is fully charged.
WORKING
You can see the bc547 is connected to one endof coil pin to switch relay & when it received enough current at base it will switch on relay. Usually we use preset to set cutoff voltage but here i have used fixed resistance.
10k connected to positive that provides current to 2.2k connected to base of bc547 to switch but to avoid early cutoff, i used 180+470 ohms to groud the current from 10 k Resistor and when voltage reaches to 13.9v there current also increases so 2.2k resistor finally receives some current to base of transistor, and relay turns on and Cut Off supply to battery.
If you increase resistance then (180+470 ohms) cutoff voltage will decrease.
If you decrease resistance then (180+470 ohms) Cutoff voltage will increase.
👉 Download circuit diagram link
drive.google.com/file/d/18vnR...
Join Group: / 819126578700997
Follow Page: / creativetechvids
Part List
12v SC Relay.
BC547 / Bc548 Transistor.
180 , 470 ohms Resistor
1k, 2.2k, 10k Resistor.
Red & Green LED.
SR360 Schottky Diode.
1N4007 Rectifier Diode.
12v Buzzer ( optional ).
Crocodile clip wires.
Music Credits
Corporate Music Only12 volt auto cut off battery charger
muy bien muy bien hermano me en canta la electrónica ,,te saludo desde costa rica ,pura vida así decimos acá 👍👍
Thanks 😊
Bu sitede gördüğüm en iyi elektronikçi sensin tebrikler 😃
Thanks for appreciating 😄
Sir your explanation is very clearly TQ sir
Thanks 😊
Super video circuit diagram.thank you
You're most welcome
How about the amperage of the transpormer to the wire and to that indicator? In can affect the amperes? Or not? Decreases or not? Because i used 8agw wire. And what kind of relay is that? Is it electrobpnic relay?
Great video .. thank you
You're most welcome
Este circuito tiene proteccion de polaridad inversa?
At any level of battery tension the charger returns to work ?
good jobs thank you
Your effort is appreciated but from my experience with batteries they reach full charge voltage but they are not fully charged this is a dilemma which I can't solve.
ruclips.net/video/nvlOeDHkwK0/видео.html
Check out this video with adjustable cutoff and feedback from battery for precise cutoff and can be used and adjusted for any battery upto 24v
Great video 👍
Thanks
Nice video
Thanks for sharing
You're most welcome
Super sin eline saglik devam
Creative video, thanks :)
My pleasure Thanks for watching 😀
All good boss super💐
Hi can i know how do you had modelise this circuit or how do you made the choices of components of this circuit please
very nice idea ..thank you
Most welcome 😊
you are the best 😎👍👍
Thankyou for appreciating, you may checkout other interesting videos on my Channel
I cant found sr360, can I use 6A10? or what is alternative for this diode?
Hi! can I charge the drile battery 12v with that?
Thankyou so much....
You're most welcome
Uma ótima noite colega gostei desse carregador de bateria , achei ótimo vou montar, ele carrega bateria de 12v de automóvel?
Check out this video for best protection and precise cutoff.
ruclips.net/video/nvlOeDHkwK0/видео.html
Love it
Thanks
Tank you 👍👍👍👍
My pleasure, Thanks for watching 🙂
Hey what edit i have to make in order to cut off at 12.7 v
Esse projeto serve para indicar o carregamento bateria de ácido ?
Yes, it works to charge lead acid batteries.
I have laptop charger 15volts 6amp. Can I use this charger for input device☺?
Hello from Russia. Сool!!!
Thank-you so much
Hello, can I keep the automatic cut off battery charger circuit on without worrying that it might burn? my charging apparatus will be 12Vdc 1amp
I'm trying to make an automatic backup power using battery like this with that connection. the battery will supply my system when the main source is cutoff, similar to emergency lights, so can i keep the circuit connected?
Can you please explain how the current detector circuit works, which will indicate that the battery is charged? thank you.
You can see the bc547 is connected to one end of coil pin to switch relay & when it received enough current at base it will switch on relay. Usually we use preset to set cutoff voltage but here i have used fixed resistance.
10k connected to positive that provides current to 2.2k connected to base of bc547 to switch but to avoid early cutoff, i used 180+470 ohms to groud the current from 10 k Resistor and when voltage reaches to 13.9v there current also increases so 2.2k resistor finally receives some current to base of transistor, and relay turns on and Cut Off supply to battery.
If you increase resistance then (180+470 ohms) cutoff voltage will decrease.
If you decrease resistance then (180+470 ohms) Cutoff voltage will increase.
good job sir thank you. but sir I need a 24 volt battery charger like this sir thank you nd God bless you.
Yes soon I'll upload
Can I use it as solar battery charger??
It can work properly 12 volt 35 ah bettery.. 🙏🙏🙏
Very nice
Thank-you
my output voltage from the trasformer is 16,8 volt will this work??
hello friend good video, could you tell me what resistance to use to exercise the short at 12.6v... thank you very much
Check out new version with adjustable precise cutoff without relay.
ruclips.net/video/nvlOeDHkwK0/видео.html
👍👏❤
Nice
Can I use a 15 voltsdc/3amps power supply
In your diagram you have show the dropping resistor for the LED’s as 10k instead of 1.0 k but in the video it’s ok
14-14.4v maximum
Can we use a half wave DC supply as it is good for charging
With this circuit it is better to use Full wave rectifier
Good work
Thank you! Cheers!
Hy sir,,can I make a cut off 72v battery charger with a voltage of 86v 5a??
Can I take 5408 diode.?
Reply
Please u make a 220v AC,500watt chaser using relay,BT 136,4017 ic
Yes, you can use 5408 general purpose diode, but its recommended to use Schottky Diode as they have low drop voltage.
will this work if i use alligator clips? I can't find crocodile clips here.
Hi Guy at CREATIVE TECHOS
Very nice circuit and very good explanation with the video and thank you for the circuit diagram, only thing is please indicate which is NC & NO in the diagram
What resistor can I use to cut off charging at 13.8 volts
With the present setup it cuts off at 14.1v and cuts in when battery voltage drops to about 11.1 volts
Thanks for your efforts, please reply
Thanks for your enquiry, actually it was designed to cutoff at 14.4v.
But if you want to set different cutoff voltage, please checkout the another video on my channel that circuit is without relay, just simply used mosfet, also you can use variable resistor to set any cuoff voltage.
Thanx
You're most welcome
How much input voltage you used
Please explain the working of the circuit diagram step by step in detail.
HELLO. Can I use 12V relay with 10A to 220V with 14V input?
Yes, you can use
Is this charger good for all types; Sealed Lead Acid, Nickle Cadmium (NiCd) and Nickle Metal Hydride (NiMH), and Lithium Polymer? Thank you.
This circuit is best for lead acid batteries.
I have a power supply charger for cameras, and its capacity is 12 volts - 16 amps. It has a variable resistance to raise and lower the voltage. Is it suitable for this project?
Fir charging lead acid battery, you can use that power supply by setting the output voltage to 14-14.5v max
@@CreativeTechos the power supply actually gives a reading of up to 14 volts
Sir if you charge a battery less than twelve volts like lithium battery you have to adjust the input voltage for the specific battery or this is battery charger are dedecated only to 12 volts batt i'm i correct sir nice presentation thumbs up done subcriber of your from the philippines tnx sir
Thanks, sir actually this os basic design for just 12v lead acid battery, and lead acid battery charges full @ 14-14.4v.
But lithium batteries are different and is charging full @12.6v, more than will hurt battery life.
So soon I'm going to upload the Balance charging system for 3s Lithium battery
Gracias bien por el viento lo vi bien gracias kiero guasa si puede
Thanks for watching 🙂
Merhaba!
Bu filmi izledim ve harika olduğunu düşündüm, tebrikler!
Abi yardım edin 13.8V/10A beslemem var ve tamponda kullandığım bir araba aküsünü dizel ısıtıcı ile 12V/10A'da şarj etmek istiyorum.
Elektronik bileşenlerin hangi değerlerini değiştirmem gerekiyor (sesli uyarı kullanmayacağım).
Teşekkürler kardeşim! Tanrı seni korusun!
👌
Thanks
Is it ok if i use bosch relay 30amp?
Yes you can use but instead of bc547 use TIP41C or other NPN power transistor to provide enough current to relay, also take care of transistor pin outs.
14 v ki jagah 12 v supply de sakte hain?
Plz aap Bataye.
👍👍👍👍👍 Make a video 👍👍👍👍👍
24volt Auto cut off battery charger with full charge alarm.......
I'll soon upload 👍
Can we charge it for 12v lithium ion battery ?
Yes, but replace 180 ohms Resistor with 240 ohms to cut off at 12.7 v
"Pin 1 and pin 5 of the relay refer to the coil, correct?"
Good
Thanks cheers 🥂
Muy bueno 👍👍
Thanks 😊
Sir what use the source of 14.4 like (1A transfer) or other let me explain...plz
You can use 18-24v transformer with bridge rectifier then you can regulate that dc voltage with lm317 ic that will provide you voltage of your choice with 1.5A output
Instead of buzzer what we can use ?
Just led is enough, also you may check out this video with bes protection and precise cutoff.
ruclips.net/video/nvlOeDHkwK0/видео.html
hello, can i use this circuit with a 3.7v battery?
Nope, as 12v relay is used, I'll soon upload auto Cutoff circuit without relay for 3.7v, Subscribe & turn on notification for ALL and stay updated
Bro, please make a 3.7 Volt battery charge using a relay that automatically turns off when the battery is full. Thank you in advance
Check out on my channel, i have already uploaded 3.7v auto cutoff without relay.
Hi sir, what should I do in order to cut off at 13.7 v?
New subscriber
Thankyou so much 😍
Sir,what can be used other than SR360, Im using orcad Pspice and I cant find SR360
SR360 is Schottky diode and has lowest voltage forward drop, if you're unable to find Schottky diode, You can also use General purpose diode 1N5408
@@CreativeTechos Thankyou Sir!
My pleasure 🙂
buenardo
14.5 v how to Transformers select 12 volt transformer ok aur any other transformer suggestion for you
You can simply use 15 v transformer and use lm317 to regulate it to fixed 14.5v
Sir kya ye 300wat solor panal me laga sakte h 8,9amp me please reply
Yes max 9A and replace SR306 diode with 10A diode, and and use good cables
@@CreativeTechos kya 6amp ki 2 doide Laga sakte h parelol me
Yes
if for 14 v out cut, what should be changed?
For 12v battery it cuts off when battery will reach about 14v during charging
Yes have diagram..5 star
24 relays can be used in this component
Can be used for 5 v auto cut?
No it is for 12v, I'll soon upload for that too
Is it working for li iorn 12v battery
Yes, but need to change 180 ohms Resistor to 240 ohms
60AH better charge possible?
Yes, you can charge 60AH battery just replace 1N5408 diode with MIC10 & input must be 14v 4-6A
Dear Friend, I made a charger following your video. But it's buzzer is activating since start of battery charging. Please explain me, what is the wrong with my charger.
Make sure input is 14v -14.5v max, and connect battery first then powerup the circuit.
amigo sino se consigue el 360 es diodo cual lo rrenplasa porfa por que no lo encontrado profe o aguien que sepa ok gracias
What if circuit beep on 12 volt without any charging load it's not working properly plz clear the problem
Apa kah charger ini perpugsi untuk 12v20a mohon pencerahannya pak
This charger also max 10A
@@CreativeTechos pak tolong buat charger 40 ah
diode mur 460 used
Peace be upon you, does this circuit completely disconnect the charge when the battery is full
Yes, the relay disconnects the charging to battery
Give Circuit Diagram for 24 v also please ??? 🙏🙏🙏
This shakeit 5v relae using 5V battery charging wark yes o no plis sri.? And like tanks videos upload🤗
Same circuit cannot be used for 5 volts, even by changing relay, please check out 18650 battery charger video on my channel that works with 5 volt and without relay.
@@CreativeTechos mm ok
👍👍👍
Hi, In the circuit diagram the normally closed relay contact ; e.g closed on a non energised relay, is denoted by a blackened relay triangle contact style symbol in the relay diagram. The normally open relay contact; which closes when the relay is powered/energised, is denoted by a white triangle style symbol in the relay diagram.
Ciao ho realizzato il circuito.Non stacca la carica resta sempre acceso il LED rosso.Grazie
14.5 V with how many amperes?
3A using 1N5408 or use MIC10A for maximum 10A output
The buzzer is pasiv or activ?
Buzzer is active, buzzing on dc without using oscillator.
How many Amps battery we can charge?
Suitable for about 7.5-24ah
@@CreativeTechos Thanks bro
How many amps is this charger?
3A output if used 1N5408 pass through diode wirh 3A transformer & bridge rectifier.
@@CreativeTechos ok thanks
My pleasure, Thanks for watching 🙂
Make pcb for this
Yes pcb soon coming with rectifier filter
Your showing practical jumper given to transistor bc547 pin no 3 emitter is connect to relay No . But your circuit diagram is showing different.
Mere pass DC 19volts hai, kya yeh is ko 12v tak ley aaye ga?
No you may use Step Down buck converter to set to at rated voltage according in video.
@@CreativeTechos thank you for response, Means i have to connect LM2596 dc-dc buck converter and set 14.5volts then connect this circuit, Right
Yes, also you may check this video
ruclips.net/video/nvlOeDHkwK0/видео.html
It has more precise with cutoff feedback from battery and without relay and is more powerful.
ایا باطری اتومبیل هم شارز میکند؟
Bhai Input 220v de saktay hai
No, use transformer and bridge rectifier to convert ac to dc first.
Sir 6volt battery auto cut circuit video upload
Ok, I'll upload soon subscribe & stay notified
Sory resistor 1watt or 1/2watt
Thank
All Resistors 1/4 watt
Can i charge my lithium ion battery
Nope lithium ion battery needs accurate 12.6v input