Did you manage to get a front brake?! I got told the front wheel came with a replacement brake, and wen it arrived it was just the wheel, no brake, no axil
It was easy to replace the motor. Tip for the motor cable , run it with the plastic cover that comes in the tip to protect the pins, also don't try to run in the same hole that was before, not going to turn since it's too narrow.
Excellent video - My son just got a flat tire on his & I am going to go to his campus pick it up & bring it home to my garage & change the tires for him. I figure why not change both tires while I am at it.
@@INMOTIONSCV well, thx, it was overheating due the hot weather which is over 35’c in europe.:( ,but my xiaomi scooter is working under the extrem temperature. i have tired the L9 under 30’c it worked normally.
One simple cable waterproof joiner near the back wheel to disconnect the motor from the scooter saving taking the whole thing apart! How Stupid is your design team??
Thanks to inMOTION for the video. Can you post another video for changing the front brake and replacing a tire please?
Did you manage to get a front brake?! I got told the front wheel came with a replacement brake, and wen it arrived it was just the wheel, no brake, no axil
@@artyfartymovieparty No I haven't ordered a brake yet since I just got the scooter
It was easy to replace the motor. Tip for the motor cable , run it with the plastic cover that comes in the tip to protect the pins, also don't try to run in the same hole that was before, not going to turn since it's too narrow.
Excellent video - My son just got a flat tire on his & I am going to go to his campus pick it up & bring it home to my garage & change the tires for him. I figure why not change both tires while I am at it.
Do you know what size the rear wheel bearings are
My bearings are really noisy after 1,000 km
Do you know the measurements for the front and rear wheel bearings and can the rear bearings be replaced?
How do you feed the new motor wire through the deck?
where can i buy a new ecu shield casing > ? ? not the main battery cover but the other one with the 5 screws ? ?? ?
merci ❤ Thank you for this video what is the reference of the screws under the deck at 1:40min
Gracias inMOTION por el video muy importante justo lo necesitaba
Your video is about 20 percent hlelpfull do you feed the motor power wire back thro with out damaging brutal
my s9 says phase current sensor failed ,it shuts down at 70% or 37% sometimes ,what is wrong ?
We are sorry that you ran into issues. Can you contact us at service@imscv.com with your SN number & photos or video of the issue?
@@INMOTIONSCV well, thx, it was overheating due the hot weather which is over 35’c in europe.:( ,but my xiaomi scooter is working under the extrem temperature. i have tired the L9 under 30’c it worked normally.
This is a really pathetic design INMOTION. Have shame..
One simple cable waterproof joiner near the back wheel to disconnect the motor from the scooter saving taking the whole thing apart! How Stupid is your design team??
You don't need to take it apart for tyre Change
There is enough cable to take tyres off
But I fit honeycomb solid tyres
Had to take scooter apart 😢