After watching this video, it made installing these a breeze!! I did, however, remove both tires to have enough room to work. Not sure how anyone could install these without removing the tires. I ran in to a little trouble getting one lug nut loose, so it took a little longer than it should have otherwise. I would add a video of the completed project, if I knew how.
I'm in the market for one of these LED turn signals for a while, but I've read another sequential turn signals (forgot brand) that has been out on the market for a while craps out pretty fast. These are new and I like the design, probably give this a try.
Hey man, it did the same thing to me on one side only. Pull the plug out where the large amber bulb used to be and flip the new circuit board connection 180°. Hope this helped bud!
I went through two pair of these type of signal lights I’m always have an issue with the driver side turn signal hyper blinking need some help of trying to figure out how to fix this issue?
My DRL for my left turn signal doesn’t stay on, even before I replaced them with these. Turn signal works fine, the white DRL just turns on for a second then turns off. Do you have any recommendations as to how I could fix this? I tried disconnecting the battery to reset bcm but no solution. Thanks
Anyone have any idea why I only get the yellow lights (turn signal/flasher). I get no white lights for DRL or parking lights. Original lights worked perfect. Any assistance would be appreciated. I followed this video verbatim. Have contacted CJPony Parts but very rude personnel told me they do no provide technical help. I have a 2016 Mustang Ecoboost.
Will this work on the 2017 roush stage 3 front bumper? I know they re direct the driving lights in the middle of the car so not sure if that will work with my wiring application
Will this work on 2016 convertible stang i4 eco boost? Vin 1FATP8UH3G5275596. I emailed but haven’t received reply yet. And will the DRL feature stay on when light switch is in the auto position?
I got the OPT7 diffused units but it's making me wonder if I should have gone for these instead, being the only other kit that won't throw a light error (galloping noise, so people are calling it). And based on this video, it looks like these are actually colour matched to the OE DRLs. I guess my only minor gripe is they switch back to white abruptly vs my OPT7's smooth fade switchback. ...though it is nice that this kit actually gives you a place to put the other connector, unlike the OPT7 solution... Which is just to let it hang...
Just installed these and the white doesn't work for me. They lit up once and that was it. I checked the connections and unconnected and reconnected and still nothing
@@cjponyparts I have checked all the plugs. Which is really only 1 plug. Since the other is not hooked up to anything and tried talking to customer service about this issue and they haven’t got back to me.
![SahBabii - Viking [Official Music Video]](http://i.ytimg.com/vi/D37cL92JX0I/mqdefault.jpg)
Product Info:
www.cjponyparts.com/front-switchback-sequential-turn-signal-marker-light-led-kit-mustang-v6-ecoboost-gt-us-spec-2015-2017-gt350-gt350r-2015-2020/p/MLLED4/
Are you going to make these for the 2018+ GT mustang???
Do you make a version of this that would fit a 2020 GT Mustang?
Hopefully we can get something similar for regular 2018+ mustangs, they look great Bill!
Make this for the regular 18-20 Mustang please!!!’ 🙏
After watching this video, it made installing these a breeze!! I did, however, remove both tires to have enough room to work. Not sure how anyone could install these without removing the tires. I ran in to a little trouble getting one lug nut loose, so it took a little longer than it should have otherwise. I would add a video of the completed project, if I knew how.
When will these come back in stock ? I tried to other mine today but the link didn’t open up the product.
Please make a video on head up display installation.
lets go already 2018 +++ Mustangs
I added LED bulbs to my 2015 but these are slick too,warranty is everything when it comes to LED,most are unsatisfying
Will these fit my 2020 mustang ecoboost ?
Can a 2017 Mustang front turn signal be made to fit a 2018+?
What was the tiny amber bulb number you took out?
I have to say these look pretty cool. Sad to see another posted they crapped out after 5 months.
I'm in the market for one of these LED turn signals for a while, but I've read another sequential turn signals (forgot brand) that has been out on the market for a while craps out pretty fast. These are new and I like the design, probably give this a try.
Ohhhh "The Arrow" was the one I was reading about that went bad. They're made by OPT7. 🤔
These are a new product, there are similar products on the market that you are probably reading about.
Guess I'll grab those in the future; lighting is a lot more consistent
Were can I purchase a set from
Hey Bill, will these come with a warranty? I had the arrow turn signals but they went out after 5 months.
How come mine isn’t staying on with the DRL ?
Please explain why
Hey man, it did the same thing to me on one side only. Pull the plug out where the large amber bulb used to be and flip the new circuit board connection 180°. Hope this helped bud!
@@ronniewilhite7798 I love you! Thank you so much!
Waited all day to get home to watch this only to find out it doesn’t fit on a 2019 mustang GT
jag sidhu yeah got me too ..it says in the heading 2020 ..bit misleading really
@@SCORPIO2011 We only have to many characters in the title so we break it down more in the description.
Can we see this on the 3v pls
Hello. We just installed it but for some reason it wouldn’t stay in with drl
mine either it only does the turn signal
I went through two pair of these type of signal lights I’m always have an issue with the driver side turn signal hyper blinking need some help of trying to figure out how to fix this issue?
That would look amazing on mine. Mine is a 2017. Definitely want this for her.
Hello Idylkr, I just wanted to ask you is there a remote or a switch to turn on and off whenever ?
That was pretty damn good.
Any chance you make something like this for the s197?
Hey does anyone know the name of the tool he uses to unclip those plastic pins?
It's a small flat head screwdriver.
You could also get a panel popper or trim tool...
Can you guys do a video on the gt350 for this? I’ll give you my car for the video if you don’t have one lol
Joey M look up the GT350 fog light video, you will need to pull the bumper unless it’s a tech pack 16
How much does those things cost
The white didn’t work for one of my lights
My DRL for my left turn signal doesn’t stay on, even before I replaced them with these. Turn signal works fine, the white DRL just turns on for a second then turns off. Do you have any recommendations as to how I could fix this? I tried disconnecting the battery to reset bcm but no solution. Thanks
Did you ever fix it if so how?
This work for 2021 GT500
Anyone have any idea why I only get the yellow lights (turn signal/flasher). I get no white lights for DRL or parking lights. Original lights worked perfect. Any assistance would be appreciated. I followed this video verbatim. Have contacted CJPony Parts but very rude personnel told me they do no provide technical help. I have a 2016 Mustang Ecoboost.
Following, I have similar issue, did u ever get it resolved?
No sir. Still no answer. Sorry.
@@ChristCommunityChurchGWDdid you try rotating the drl plug 180?
Will this work on the 2017 roush stage 3 front bumper? I know they re direct the driving lights in the middle of the car so not sure if that will work with my wiring application
Yes they will.
What about 2019 GT mustang
Mohamed G Abdelrahman won’t fit unfortunately, only fits on 2015-2017 mustangs and all the new GT350’s and GT500’s
Not yet developed but they will eventually
@@JohanSalvattore never * 😂
What do you have for 2020 Shelby GT500’s?
Jim Orr look online I got some
Can’t find much to work on 2020 GT500
Will this work on 2016 convertible stang i4 eco boost? Vin 1FATP8UH3G5275596. I emailed but haven’t received reply yet. And will the DRL feature stay on when light switch is in the auto position?
Dose this fit the new GT500
Yes it will
I got the OPT7 diffused units but it's making me wonder if I should have gone for these instead, being the only other kit that won't throw a light error (galloping noise, so people are calling it).
And based on this video, it looks like these are actually colour matched to the OE DRLs. I guess my only minor gripe is they switch back to white abruptly vs my OPT7's smooth fade switchback.
...though it is nice that this kit actually gives you a place to put the other connector, unlike the OPT7 solution... Which is just to let it hang...
Such bullshit that the 18s and 19s don’t have these... wtf
Majority of people who have the 18+ are not gt350s but I guess that’s not important
wow, hehe crazy
EU Model ?
Doubt it. He said US spec
:D
Just installed these and the white doesn't work for me. They lit up once and that was it. I checked the connections and unconnected and reconnected and still nothing
Try unplugging it and flipping the connector.
Ugh those stock wheels
Easy ese I still have mine.
I know...gotta upgrade mine too
So my driver side doesn’t want to stay on any ideas in what to do?
Double check all your connections, sounds like one of the plugs may not be seated all the way.
@@cjponyparts I have checked all the plugs. Which is really only 1 plug. Since the other is not hooked up to anything and tried talking to customer service about this issue and they haven’t got back to me.