Why is it that I have never seen someone do a pressure test before on a water loop with that air pressure gauge?? heck not even mentioned in water builds i have seen...??
@@fabioules2737 They make that specifically for computers? heh. I could make it with spare parts laying around. 2 Pipe nipples, pipe T, gauge, ball valve, shrader valve.
I have built in this case several pc’s for customers and this is not easy. If I had smaller hands to do this, I would build a personalized rig for myself. Great job!
In mine I was able to get the cable panel to close with some cable training and maneuvering. Basically had to force it flat into that channel. I also ran my 8 pin EPS through that, out towards the front panel and then back in to prevent the EPS from having to run over the mobo. Cleaned it up and made it easier to manage the other cables. Might try that. Little bummed the shroud doesn't fit with that res too but awesome build. I am super jealous of your front cover. That's my next mod. I wish Phanteks also had drilled holes behind all the places monoblocks or water blocks are screwed into for easy removal and maintenance. I had to do that mother board tray mod myself last night as I'm cleaning and rebuilding. Also +1000 for the Dr Drop. That tool is amazing. Saved my ass on my own build. Found a leak where the cut on a tube wasn't clean.
I wanna highlight what a smart move 2:07 was. 2 screws into the fan to secure fan and radiator to the case and 2 more into the HALOS. That way you did not have to tighten 4 screws super hard through the plastic fan frames. Most might not have noticed and I only did because I struggle with how to install 6 of those myself.
gotta say i love the way u test to see if u have any leaks man never thought to do that and dk why more ppl dont do that but im just wondering what kind of temps ur getting never seen a cpu loop like that
Pressure checks are quite common in just about everything else involving gas/liquid. I do them routinely at work, and like you I've never seen anyone do it with a pc build. Always fun to see commercial/industrial get stepped down to consumer.
Amin Sturies modmymods.com but allow plenty of time with them or check www.reddit.com/r/Phanteks/comments/e4kd44/plasma_cut_the_evolv_shift_front_panel_details_in/
Sauber! Ich find das Shift X ja sowieso mega, die WaKü hast du richtig gut integriert. T-Stück auf dem CPU Block für CPU und GPU parallel hat auch was! ;)
Geht das mit dem T-Stück nicht evtl total nach hinten los? Somit besteht gut die Möglichkeit, dass die GPU so gut wie keinen Flow abbekommt. Eigentlich ist es physikalisch sogar wahrscheinlich, dass da so gut wie kein Flow ankommt, weil größerer Widerstand. Sollte man auf keinen Fall so nachbauen. Gut aussehen tuts dennoch!!!
Hi Max! Erstmal super PC Build vom Phanteks Shift X. Hätte kurz ne Frage dazu. Hast du die Front mit der Wabenstruktur selbst angefertigt oder anfertigen lassen? Hab das Gehäuse schon ne weile liegen und wollte in 3-4 Monaten einen neuen PC damit bauen. Die Front sieht ja so um einigen besser aus. Daumen hoch hast sowiso.
Super, erstmal vielen Dank für deine Antwort. Hab auch schon auf der Seite von Gosumodz vorbeigeschaut und leider ist die Seite schon seit Monaten geschlossen. Hoffe da kommt bald wieder was von denen.
Nice build, but I wished you talked about the build some instead of just B-roll. Like why you went with all Phanteks water cooling parts or any snags you hit during wiring or what you would do differently if you had to do it again.
Jesus, that MB cable connector is really stuffed in there lol. Great job. I would have opted for a clear dye purple, I think it would have looked better, but it's sick.
Looks good o.o recently bought this case with the idea of setting out for a water cooling build myself~ Im fairly new to this and have not seen this parallel thing done before~ Wouldnt that kill the flow coming into the fittings before CPU/GPU? Like are they getting equal? Not to critique the build on aesthetics (Which are great) but id like to see the impact of this on thermals compared to other set ups :3
The inlet of cooled water comes from the processor and immediately goes to the video card, thus the flow of waste fluid from the video card enters together with the water outlet from the processor into 1 common flux.
@@zakiry8634 there is a lot more to cases than how they look, it doesnt have good cable management, very poor airflow, if this weren't water cooled the temps would be awful, the riser that comes with it is known to be shitty. when this case was designed, even though it looks great and is high quality the designers clearly had very specific hardware in mind, on the website at first (its changed now) had the pictures of the case where the cables were clearly photoshopped out of sight and made less noticeable. There is also not a lot of room for the PSU. The side panel often times doesnt close properly if and AIO, or fans or radiators have round isntead of flat screws, obviosuly the designers didnt think that 1 mm mattered, but it does, also it has terrible airflow and thermals
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Wow using the air pressure with a pump for leaks is genius!
Why is it that I have never seen someone do a pressure test before on a water loop with that air pressure gauge?? heck not even mentioned in water builds i have seen...??
ikr!
agree
thats a product from aquacomputer, called dr. drop. I have seen people build a gadget like that before though
@@fabioules2737
They make that specifically for computers? heh. I could make it with spare parts laying around.
2 Pipe nipples, pipe T, gauge, ball valve, shrader valve.
I always love me a Phanteks Evolv Shift build
I have built in this case several pc’s for customers and this is not easy. If I had smaller hands to do this, I would build a personalized rig for myself. Great job!
Hell yes! Beatiful build. I was waiting for this!
Cooler Build, tolle edit's und vom geilen Phanteks mal ganz abgesehen 😀😀 hast du echt klasse gemacht!
In mine I was able to get the cable panel to close with some cable training and maneuvering. Basically had to force it flat into that channel. I also ran my 8 pin EPS through that, out towards the front panel and then back in to prevent the EPS from having to run over the mobo. Cleaned it up and made it easier to manage the other cables. Might try that. Little bummed the shroud doesn't fit with that res too but awesome build. I am super jealous of your front cover. That's my next mod. I wish Phanteks also had drilled holes behind all the places monoblocks or water blocks are screwed into for easy removal and maintenance. I had to do that mother board tray mod myself last night as I'm cleaning and rebuilding. Also +1000 for the Dr Drop. That tool is amazing. Saved my ass on my own build. Found a leak where the cut on a tube wasn't clean.
Dude this is insane
The music is pure hell....absolute hell.
This channel is so underrated! This is so good!! keep it up man
I wanna highlight what a smart move 2:07 was. 2 screws into the fan to secure fan and radiator to the case and 2 more into the HALOS. That way you did not have to tighten 4 screws super hard through the plastic fan frames. Most might not have noticed and I only did because I struggle with how to install 6 of those myself.
Exactly that was the only option.
gotta say i love the way u test to see if u have any leaks man never thought to do that and dk why more ppl dont do that but im just wondering what kind of temps ur getting never seen a cpu loop like that
Pressure checks are quite common in just about everything else involving gas/liquid. I do them routinely at work, and like you I've never seen anyone do it with a pc build.
Always fun to see commercial/industrial get stepped down to consumer.
Hands down the best Evolve Shift build I've seen. No doubt. I might actually try to do it myself. Wow.
Sehr gute Kameraführung gute Produktvorstellung saubere Arbeit und ein klasse Build.
Nice to see how the Phanteks Res looks in a build.
love that custom front panel
2 years ago you were begging to EK for a sponsorship now your balling with phanteks! Nice brother
I like the idea of splitting the water at the cpu block. Nvr thought to do that. Good stuff.
I love the Honeycomb cutout on the front panel. That would probably boost cooling performance for an aircooled in this case and it looks sexy:)
Awesome build! Mini ITX custom loops are tough, congrats on pulling it off, love it.
Beautiful build and very creative pressure check for leaks!!!!
Ich hab jetzt auch so nen Phanteks Evolv Shift X hier herum stehen. Der HTPC wurde mir auf Dauer dann doch zu laut beim Zocken. Also Wasser marsch :)
Did you mod the front panel yourself ? I wish I could do that on my shift X to improve the cooling...
Amin Sturies modmymods.com but allow plenty of time with them or check www.reddit.com/r/Phanteks/comments/e4kd44/plasma_cut_the_evolv_shift_front_panel_details_in/
No link to radiators or fittings or tubes?
Go to phanteks website you will see the fittings, not sure about Rads and Tubs. Probably some you can find on enthusiast website, like FrozenCPU
Great job, is that the taller Shift X case? Cant find it anywhere, think they stopped making the tall one.
Yes it is.
Why were you pumping air pressure at 5:00? Sorry I'm new to custom water cooling, about to start my first project soon so I'm studying everything.
To leak test the loop
What adapter is that at 1:44? Is that an EKWB model?
Insane build!
Sauber! Ich find das Shift X ja sowieso mega, die WaKü hast du richtig gut integriert. T-Stück auf dem CPU Block für CPU und GPU parallel hat auch was! ;)
Geht das mit dem T-Stück nicht evtl total nach hinten los? Somit besteht gut die Möglichkeit, dass die GPU so gut wie keinen Flow abbekommt. Eigentlich ist es physikalisch sogar wahrscheinlich, dass da so gut wie kein Flow ankommt, weil größerer Widerstand. Sollte man auf keinen Fall so nachbauen. Gut aussehen tuts dennoch!!!
How thick are your rads? I'm trying to something similar in the same case. Sweet build though brother!
This is stunning
"Purple dream" sounds like a kind of kush lol.
I love this case ...i love this build
Die ganzen Phanteks Fittings müssen sich auch summiert haben
Geile Shots, wie immer
no video of the case buildt with the side panels on?..
coolest Phanteks i'v seen
Hey, what the loop structure, exactly? Looks great!
LIT AF - wie immer 🔥
masterpiece!
Awesome build. How are the temps and performance?
Hi Max! Erstmal super PC Build vom Phanteks Shift X. Hätte kurz ne Frage dazu. Hast du die Front mit der Wabenstruktur selbst angefertigt oder anfertigen lassen? Hab das Gehäuse schon ne weile liegen und wollte in 3-4 Monaten einen neuen PC damit bauen. Die Front sieht ja so um einigen besser aus. Daumen hoch hast sowiso.
Hi, ist von Gosumodz. :)
Super, erstmal vielen Dank für deine Antwort. Hab auch schon auf der Seite von Gosumodz vorbeigeschaut und leider ist die Seite schon seit Monaten geschlossen. Hoffe da kommt bald wieder was von denen.
Really nice build ! But I have a question.... why is he using a pump and a pressure meter ?
He checks for leaks before filling.
@@TechMaxTV1 Oooooooh okay :o good to know ^^
Nice build, but I wished you talked about the build some instead of just B-roll. Like why you went with all Phanteks water cooling parts or any snags you hit during wiring or what you would do differently if you had to do it again.
keep up the dope work. love your vids
@techmaxtv for the custom cables what lengths did you use?
how many compression fittings were used here? i tried watching but couldnt keep up lol.
What controller did you use to hook up all the RGB watercooling components?
TechMaxTV PLZ Give a link to the device with a pressure gauge and a pump to check the integrity of the circuit!!!!!!!!
Check description, added it. Its called Dr. Drop.
Jesus, that MB cable connector is really stuffed in there lol. Great job. I would have opted for a clear dye purple, I think it would have looked better, but it's sick.
love the TOWER BUILD :D
Looks good o.o recently bought this case with the idea of setting out for a water cooling build myself~ Im fairly new to this and have not seen this parallel thing done before~ Wouldnt that kill the flow coming into the fittings before CPU/GPU? Like are they getting equal? Not to critique the build on aesthetics (Which are great) but id like to see the impact of this on thermals compared to other set ups :3
How thick are the radiators?
awesome !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
How does two tubes go to each cpu port?
not sure if im keen on the idea of CPU/GPU Loop :-/ - but its a nice build
Solid build! Btw is that a customized front panel? It looks so cool, and the ventilation is definitely better than the original one.
The Shift and Shift air are all available, but I cant find the shift x anywhere. Any idea where I can find this case?
Pretty much sold out everywhere. I hope phanteks makes another batch or a new series
Realy nice and a very good presentation
How do two lines go to each cpu ports?
Perfect build. Only one Question, Do you manage to include any mass storage such as SSD? Was it behind the reservoir?
M.2 on the motherboard.
am i crazy or does the shift x not come with a honeycomb front like that?
No it doesn’t
@@TechMaxTV1 it looks amazing, im assuming you have a cnc machine or something?
Yes got it cnc milled by a friend
Where did you get you get your front panel done??
You have any temperature performance stats?
Im worried the radiators wont cut it for my build..
Hallo Max,
Was ist das bei 4:50?
Würde mich über eine Antwort freuen :D
Nennt sich Dr. Drop.
@@TechMaxTV1 Achso Danke
nice build, i think the cables from the motherboard need to be more tight so the airflow to pass trough the board also
Since when does the shift x come with holes in the front panel?
Killer build bro!! 😲🙌🔥
Did you make the panel holes for air vents or it came with the phanteks from the factory?
I got it milled by a friend.
@@TechMaxTV1 got it. Phanteks should've actually make those panels with air vents as standard from the factory.
Where did you get the pump and gauge
How did you do the design in front of the case ???? Please I want to do that to mine 😍
Has been milled out by a friend.
why did he mount the r220 reservoir on another radiator? is this overkill or are r220s not great for temperature management?
Because that was the only place.
Nice build
Why don't you show the part of hard tubes preparing?
Should I?
@@TechMaxTV1 It would be very helpful! You inspire us to build such beautiful pc systems but we can't do that without knowing this part
Sick build. :0)
Can someone explain how this loop works?
Why are there 4 tubes on the cpu block
GPU is parallel to the CPU.
But will that not bypass the cpu or gpu ?
The inlet of cooled water comes from the processor and immediately goes to the video card, thus the flow of waste fluid from the video card enters together with the water outlet from the processor into 1 common flux.
Can this case fit an 360 mm AIO? (Like CoolerMaster MasterLiquid ML360R RGB)
Or any suggestion of an itx case fitting a 360 mm AIO
How are those temps holding up ?
Also how did you mod the front of the case , it looks great.
Haven’t benchmarked that thing. I’ve got the front milled by the company in the description.
Best build in this badly designed case i have seen.
TheSlacky775 how is it badly designed, it looks great, it serves its purpose as a pc case
@@zakiry8634 there is a lot more to cases than how they look, it doesnt have good cable management, very poor airflow, if this weren't water cooled the temps would be awful, the riser that comes with it is known to be shitty. when this case was designed, even though it looks great and is high quality the designers clearly had very specific hardware in mind, on the website at first (its changed now) had the pictures of the case where the cables were clearly photoshopped out of sight and made less noticeable. There is also not a lot of room for the PSU. The side panel often times doesnt close properly if and AIO, or fans or radiators have round isntead of flat screws, obviosuly the designers didnt think that 1 mm mattered, but it does, also it has terrible airflow and thermals
Impressive! How can you put lots of stuff in such a tiny case like that?
really cool build, but how did you do it with all the fans? You got one more subscriber
Womit hast du auf Dichtigkeit getestet was war das für ein Teil ?
Dr. Drop nennt sich das Teil.
Idk if I missed it but what rads are you using?
Leak testing with air... why have i never thought about this.
Everybody knows this man comeon really do you even watercool
Hows the temps?
best case !!!!
와 개좋아 ㅠㅠbeautiful!
How did you mod the side panel?
It has been milled.
Is Amazing🙈
I want to build this PC but the time lapse is too fast does anyone know how I can build this PC like a guide or step by step
echt schicker Pc
Made an ugly case look pretty nice. Thumbs up!
das ist schön
super gemacht Max ;) einen Durchflussanzeiger (Flow Indicator) wäre nicht schlecht, da die meisten Wasserpumpen einfach kaputt gehen :(
BEST BEST BEST BEST
very very beautiful
How did you mod the panel for airflow like that? I'm thinking doing the same thing to my Evolv ATX :/
Halos RGB Cool werde die auch einbauen
Wie cool kann so ein kleine pc nur sein einfach fein Top sieht aus
Gruß Cipon Romania 😎
Nice build. I have to say I never understood why buy a card with an expensive aircooler attached; just to rip it off for water cooling.
Many higher end custom cards usually have custom circuits and the VRMs or power and MOSFETs and so on are usually higher end
amazing
Sehr geil max :D ich haette mir Bends auf dem CPU Kühler gewünscht :D #antianglefitting :D
schöner PC ! Die Musik am Anfang kenne ich von German Truck Driver :)