This tutorial video is great and spot on for beginners like me.. Thanks a lot.. Also, Regarding the Gearbox analysis, and suspension hand calculations, I request you to educate us by making those videos.. Thanks in advance.. I have a lot to check out in your channel. Keep up the great work.
Informative video. However, I can't find Adams/Car on my system after downloading MSC Adams 2019 Student Version. The only applications I can see are Adams View, Adams Flex and few others. I request your help.
there was an error while modifying spring evenif file was present and the error was Adams View could not open the file 'mdids://mini_baja/springs.tbl/baja_front_spring.spr' for reading.
Hi. Do you have any recomendation to learn this? I am newly interest with vehicle especially an tubular offroad car. I just know the Fourlink Excel Calculation. Thats it I really want to know more Thanks
I'm getting error with output prefix when I try to simulate! Simulation Failed (Program Error) ! Please review the message file 'xxx_crc.msg' for details.
Amazing video man! Unfortunately I have a problem with the Parallel wheel travel simulation, it gets me the following error: "A problem occurred while reading in the property files! Please verify the existance of the property files referenced in the assembly." How can I fix it? Thanks
Hey, Can you please also show analysis for rolling& vertical force?? I tried these values. Roll angle upper-= 4 degree, Roll angle lower= -4, Vertical force= 1000 N, Number of steps= 500. But there was error coming which said step size is small. What could be the issue ?? Or can you suggest me some values of above things
![🤔 How to perform FSAE SUSPENSION SIMULATION in Adams Car? | Watch This | [Adams Car Tutorials 2020]](http://i.ytimg.com/vi/VGFYXxme-NM/mqdefault.jpg)
![🤔 How to perform FSAE SUSPENSION SIMULATION in Adams Car? | Watch This | [Adams Car Tutorials 2020]](/img/tr.png)
![🔴 ADAMS CAR TUTORIALS [Chapter one - MSC Adams car Interface] (latest 2020)](http://i.ytimg.com/vi/w-srOwaUqDs/mqdefault.jpg)
This tutorial video is great and spot on for beginners like me.. Thanks a lot.. Also, Regarding the Gearbox analysis, and suspension hand calculations, I request you to educate us by making those videos.. Thanks in advance.. I have a lot to check out in your channel. Keep up the great work.
Good stuff 👍😁. Was expecting simulation with frame (roll cage)
Coming soon!
Good job! A video on suspension calculations would be very useful. Kindly do a video on that.
One video I have made on it already you check out our Baja virtual presentation playlist.
What are the inputs,and outputs in Dynamic analysis of suspension?
What does the RPC3 file contains?
Guys you are doing a great job . keep posting videos like this .👍
it would be very informative to compare hand calculation and post processing results.
As you mentioned in the video please make a video on suspension hand calculations and verification with Adams post processing graphs
Yep coming soon
@@atvcalculations4539 I'm so happy you guys are going to do it!
Great! please make more videos on ADAMS!
Yep
Can you make a video on 'How to create custom templates for Adams car'...for example mounting the coilover on the upper arm.
I'll Make it soon.
What are the inputs,and outputs in Dynamic analysis of suspension?
What does the RPC3 file contains?
the video is great and surely it will be very informative if you can compare hand calculations with Adams post-processing
Thank you
Its great for learning.
Can you make videos for baja transmission in adams please.
Okay I'LL surely do that.
Thanks for videos
Glad you like them! Any special video you want us to make?
@@atvcalculations4539 how to assemble special subsystems like for three wheeled vehicle configuration.
@@nikhilgurav2583 you want to assemble it in Adams software?
@@atvcalculations4539 yes, can't I ?
@@nikhilgurav2583 yes you can I'll one video on it. It's a complex thing but can be done.
can u add more videos regarding suspensions module regarding baja
yes plse
Informative video.
However, I can't find Adams/Car on my system after downloading MSC Adams 2019 Student Version. The only applications I can see are Adams View, Adams Flex and few others.
I request your help.
wow, what interesting is it!!!
It could be helpful if you do a video on building template on pushrod type suspension....and saving it into the database
I try and make it as soon as possible.
@@atvcalculations4539 Importing the designed parts from softwares like catia , ansys , importing hard points from lotus
there was an error while modifying spring evenif file was present and the error was
Adams View could not open the file 'mdids://mini_baja/springs.tbl/baja_front_spring.spr' for reading.
Same here plzzz help 🙏🏽🙏🏻🙏🏻🙏🏻
nice job thanks!
Great video.. loved it ❤❤💕. But How to change the Shock mount position to the upper arm ?
Good one👍. Can you do for bus bus air suspension?
Sir, Is there any Video tutorial regarding the active suspension and interfacing with matlab?
post processing output of the analysis how to measure and do improvement after surf the graph
Thanks man ❤❤
Hi. Do you have any recomendation to learn this? I am newly interest with vehicle especially an tubular offroad car. I just know the Fourlink Excel Calculation. Thats it
I really want to know more
Thanks
I'm getting error with output prefix when I try to simulate!
Simulation Failed (Program Error) !
Please review the message file 'xxx_crc.msg' for details.
Can you mail me file and screenshots.
atvcalculations@gmail.com
good work, i've fond some problems in adjusting hardpoints in leaf spring suspension, can you please make a video explaining it ?
Surely soon
I couldn't find baja template
, Where should I download this additionally
Amazing video man! Unfortunately I have a problem with the Parallel wheel travel simulation, it gets me the following error: "A problem occurred while reading in the property files! Please verify the existance of the property files referenced in the assembly."
How can I fix it? Thanks
the same error for every simulation
Mail Me atvcalculations@gmail.com
Video on suspension calculations is also welcome....
👍
i wanna know what is the height reference i mean the height of that table
Hi sir, adams default template isn't working itself
Good job, can you make a video about suspension with leaf spring ? it will be nice if you do it :) Thanks
Yes I can, I'll make it soon.
@@atvcalculations4539 thanks a lot 👏👏
i can not buy the software it always tell me failed can you please help me
Could you tell how to install baja templates ?
ruclips.net/video/VGFYXxme-NM/видео.html what this video till end you will get it.
Hey, Can you please also show analysis for rolling& vertical force?? I tried these values. Roll angle upper-= 4 degree, Roll angle lower= -4, Vertical force= 1000 N, Number of steps= 500. But there was error coming which said step size is small. What could be the issue ?? Or can you suggest me some values of above things
Mail Me your Query. atvcalculations@gmail.com
where can I get BAJA Suspension template
Sir can u please explain dynamic analysis in detail? And what all u did?
I'll do it soon
how to get baja template
Wait in next video i'll provide you drive link to download it.
What are the inputs,and outputs in Dynamic analysis of suspension?
What does the RPC3 file contains?
I'll answer your query in upcoming video.
How do you change caster angle?
can you make a video on how to make a custom geometry template like h arms
Stick With us in this tutorial series you will see it coming soon.
Are the changing of hard points done{assigning new values} randomly?? How can I import/create a new hard point though.
I have used hard points which i have got from front view swing arm geometry graph.
Front view swing arm geometry you can learn from the book race car vehicle dynamics by milliken and milliken
Can you do a video for steering analysis that'd be grear of tour help
Exactly in which software you want me to do that? Can you please specify.
@@atvcalculations4539 adams and lotus
In assembly name I don't have fsae and Baja files in search tab. What should I do?
In further videos I have provided download links of templates so go and download it.
Sir in my software i dont have baja subsystem template.Can you guide me regarding this.
It has been provided in the description below.
Sir,Could you provide that mini baja template ??
Double wishbone and H arm
How did you get hardpoints
From swing arm geometry.
Read- race car vehicle dynamics by milliken and milliken
please use good audio delevered by an actual human..