Had to adjust some paths slightly to make it successful. Followed the steps in the video up to 03:33 (until saving the edited configuration file). Then, open Command Prompt as Administrator. Then, navigation to the "MS Visio" folder, and ranning setup.exe in the Command Prompt by entering the following commands in Command Prompt: cd %userprofile%\Desktop cd "MS Visio" setup.exe /configure configuration.xml The setup will start automatically. Note: The current version of the Office Deployment Tool (officedeploymenttool_18129-20030) only includes one configuration file (configuration-office365-x64.xml) instead of the four files shown in the video at 02:15. Keep the single file you have, rename it as shown in the video, and you are good to go.
i followed your instruction sir but after the installing. In Microsoft it says Couldn't install (it says We couldn't find the specified configuration file. Check the file path and file name)
If you're a noob like me with cmd settings, and don't know what cd means (even i don't know), but instead of: cd %userprofile%\Desktop cd "MS Visio", Just put the "link" or the "way/gate or whatever" towards your Ms Viso like: @:\Users\%your name%\Desktop\Ms Visio (without %; @ = your storage C,D,E), and once your cmd it's saying: add this command ---> setup.exe /configure configuration.xml, and press enter. Then just wait and you'll be all set. Thanks shashika for the updated way of download :))
I am in the final stage were you copied and paste this .\setup.exe /configure .\configuration.xml - But I don't understand where you got it from. So I tried to type it straight to my powershell browser and executed but it didn't work. Error message
After starting the program in PowerShell, an error pops up: Command not supported We're sorry, we can't continue because we weren't able to download a required file. Please make sure you're connected to the internet or connect to a different network, then try again. Please help me solve the problem
HI, help please: We found a problem! "We're sorry, Microsoft 365 and office click to run installer encountered a problem because you have these windows installer based office programs installed on your computer: Microsoft Office Professianl Plus 2016"
Hello, you need to delete the older version. I also encountered the same problem and solved like this. Just go to your system panel, delete Microsoft Office 2016 and coma back and download 2019 Visio. It will work.
It didn't work. The administrator of my personal computer asked for permission, and after I said 'yes', a Microsoft window appeared saying "We couldn't find the specified configuration file. Check the file path and file the name."
Thanks for your comment! I think you made mistake while editing xml file. While editing the xml file the ID in product tag you have to enter id over there which appread on the screen like ID="VisioPro2019Volume". Hopefully it Will work....
I faced that too but then It worked for me when I renamed the configuration file as just "configuration" instead of "configuration.xml" as it was already an xml file.
I faced that too but then It worked for me when I renamed the configuration file as just "configuration" instead of "configuration.xml" as it was already an xml file.
It works great: I installed it and everything. But whenever I move a big object it crashes. Can i install the Visio 2013 using your method but replacing "VisioPro2019Volume" with "VisioPro2013Volume" when editing the "configure.xml" file?
i succeeded to download it before. but now after 3 months, i cant use it anymore becase the product activation failed. can anyone help me with this problem please
so poop video A fix for this has been out for a couple of months already, the last few months have been hyped on this method, most of the positive ones have been hyped
It didn't work for me too The administrator of my personal computer asekd for the permission. I gave the permission after that window is showing We couldn't find the specified configuration file. Check the file path and name. Please resolve this issue. Thanks.
Thanks for Your comment! I think you made mistake while editing xml file. While editing the xml file the ID in product tag, you have to enter id over there which appread on the screen like ID="VisioPro2019Volume". Hopefully it Will work....
I faced that too but then It worked for me when I renamed the configuration file as just "configuration" instead of "configuration.xml" as it was already an xml file.
It did not work! At the first when I open the file of the tools and click "continue" It told me (the installaion of this package faild) can anyone help me????
thanks greatly apprerciated works like a charm. First when i edited ade a error with the > then fixed then worked :) Thanks very much i suscribe to your channel best regards
hah! just solved it. Someone in the comments below already posted it, try renaming the configuration file to just "configuration" without the ".xml" In some cases the pc already recognises it as an .xml file, so giving it the .xml suffix will just change the name, therefore causing the programm to not recognise the file
Wow, everything was done so crookedly and cut off that I don’t have the slightest doubt about how it works, and what was blurred out was the ID and could be read there - Visio2019Volume, not VisioPro2019Volume, Visio was downloaded in advance, since there was a fix for such a jump and there gives an error message
I downloaded the Office Deployment Tools and when I logged into Visio it asked for an activation code. I deleted everything and now I can't download the Office Deployment Tools again."404 - File or directory not found. The resource you are looking for may have been deleted, renamed, or temporarily unavailable."
Thanks for your comment! I think you made mistake while editing xml file. While editing the xml file the ID in product tag you have to enter id over there which appread on the screen like ID="VisioPro2019Volume". Hopefully it Will work....
I faced that too but then It worked for me when I renamed the configuration file as just "configuration" instead of "configuration.xml" as it was already an xml file.
Had to adjust some paths slightly to make it successful. Followed the steps in the video up to 03:33 (until saving the edited configuration file). Then, open Command Prompt as Administrator. Then, navigation to the "MS Visio" folder, and ranning setup.exe in the Command Prompt by entering the following commands in Command Prompt:
cd %userprofile%\Desktop
cd "MS Visio"
setup.exe /configure configuration.xml
The setup will start automatically.
Note: The current version of the Office Deployment Tool (officedeploymenttool_18129-20030) only includes one configuration file (configuration-office365-x64.xml) instead of the four files shown in the video at 02:15. Keep the single file you have, rename it as shown in the video, and you are good to go.
i followed your instruction sir but after the installing. In Microsoft it says Couldn't install (it says We couldn't find the specified configuration file. Check the file path and file name)
Thank you for the new instructions. Visio is now installed on my computer.
@@user-ld4ic8ej2p same issue
thx
If you're a noob like me with cmd settings, and don't know what cd means (even i don't know), but instead of:
cd %userprofile%\Desktop
cd "MS Visio",
Just put the "link" or the "way/gate or whatever" towards your Ms Viso like: @:\Users\%your name%\Desktop\Ms Visio (without %; @ = your storage C,D,E), and once your cmd it's saying:
add this command ---> setup.exe /configure configuration.xml, and press enter. Then just wait and you'll be all set.
Thanks shashika for the updated way of download :))
it's not working anymore, how can i activate it again?
I am in the final stage were you copied and paste this .\setup.exe /configure .\configuration.xml - But I don't understand where you got it from. So I tried to type it straight to my powershell browser and executed but it didn't work. Error message
same issue
Same issue
same 😮💨
Same
Same happed to me
After starting the program in PowerShell, an error pops up: Command not supported
We're sorry, we can't continue because we weren't able to download a required
file. Please make sure you're connected to the internet or connect to a different
network, then try again.
Please help me solve the problem
open a cmd.exe command line, not pówerhsell
HI, help please:
We found a problem!
"We're sorry, Microsoft 365 and office click to run installer encountered a problem because you have these windows installer based office programs installed on your computer: Microsoft Office Professianl Plus 2016"
Same
Hello, you need to delete the older version. I also encountered the same problem and solved like this. Just go to your system panel, delete Microsoft Office 2016 and coma back and download 2019 Visio. It will work.
So it's saying it's installed but the app isn't coming up in the start menu.
Bro from where you copy the .\setup.exe /configure . \configuration .xml. to command window 🤔🤔🤔
It didn't work. The administrator of my personal computer asked for permission, and after I said 'yes', a Microsoft window appeared saying "We couldn't find the specified configuration file. Check the file path and file the name."
I have the same thing !
Thanks for your comment!
I think you made mistake while editing xml file.
While editing the xml file the ID in product tag you have to enter id over there which appread on the screen like ID="VisioPro2019Volume".
Hopefully it Will work....
@karollaynedutra2231 remove ".xml" extention in the configuration file if you typed it manually
I faced that too but then It worked for me when I renamed the configuration file as just "configuration" instead of "configuration.xml" as it was already an xml file.
@@wanderrtwanderlust Thank you! This tip really helped!
Mine isn't start the automatically downloading. Is it takes musch time?
Give me hope that it downloaded, bcoz its taking its sweet time here :(
I tried this on Parallels Desktop running Windows 11 on my Macbook Pro M2 machine. It was found that the installation doesn't work on ARM64 machines.
Brother your an absolute help, it worked! Straight to the point in the video.
I followed all steps, but it is giving error where I run the command in power shell and it gives error that the file is not found
I faced that too but then It worked for me when I renamed the configuration file as just "configuration" instead of "configuration.xml" as it was already an xml file.
Thank you, it worked@@wanderrtwanderlust
Thank you for the video; Visio is installed now on my desk.
After searching for so much time, finally this video helped. Thank you brother.
I usually never trust clips like this, but this actually works! LOL
Thanks mate!
bot
It works great: I installed it and everything. But whenever I move a big object it crashes. Can i install the Visio 2013 using your method but replacing "VisioPro2019Volume" with "VisioPro2013Volume" when editing the "configure.xml" file?
The Product Key is expired kindly provide the solution
Thank you so much, you help for my last assignment on bachelor degree
The response I got is to use office deployment tool for 32bits cos my PC can't install 64bits. Kindly advise how to get the 32bits
same issue with me..
Sir after clicking Ctrl and S . What happened? how did you get to that new text document?. Thank you
its only for writing command name. you can note only command name not required text file
@@hariomparmar Please I don't see how you copy the command name, and my computer hasn't the open shell command when i click shift+right click
@omnyevolutions Can we do it same with Microsoft Project
Microsoft has applied license to MS Visio so even if download by this method we can't use it really.
how much time takes for installation?
my exe file link is not created on notpad? what I need to do? any suggestion?
it doesn't work for me (asking to activate Key), but with using KMS Spico i succeed to activate it
On my PC I don't have the option to open with PowerShell? any suggestions?
Awesome!! Short and upto the point. Really helped to get the app installed freely.
i succeeded to download it before. but now after 3 months, i cant use it anymore becase the product activation failed. can anyone help me with this problem please
If you follow all the steps it should work. It's quite logical.
svp dans la minute 3.37 sur quel fichier tu as cliquer
thanks you so much , i got it, so if I download excel, note , word of office ok?
Worked like a charm brother. Thanks a ton.
you are a GOAT, It's working perfectly on windows 11. Thanks buddy
My Visio is still asking me to upgrade to genuine office
Please try to Uninstall the visio and then follow the video... Try to change your Login mail on visio
If it cant find the file rename configuration.xml to configuration
i fallowed all the steps, but it ask me product key
"we couldn't find the specified configuration file. Check the file path" I am stuck in here. kindly assist
me too
Me too😢
it still works . I have it installed !!! thanks
I can't find visio in my pc ((( but microsoft office say me thet the visio already downloaded
My laptop doesn't have it
Will this affect my ms office that is already installed on my computer?
thanks bro, it actually works! and it's only using official things from microsoft
does yours can change styles of connector, shape, etc?
The product ID says "Visio2019Volume" in a blurred sentence without the "Pro". How come?
I found the same error, I wouldn't know what the correct step is...?
so poop video
A fix for this has been out for a couple of months already, the last few months have been hyped on this method, most of the positive ones have been hyped
It didn't work for me too The administrator of my personal computer asekd for the permission.
I gave the permission after that window is showing We couldn't find the specified configuration file.
Check the file path and name.
Please resolve this issue.
Thanks.
Thanks for Your comment!
I think you made mistake while editing xml file.
While editing the xml file the ID in product tag, you have to enter id over there which appread on the screen like ID="VisioPro2019Volume".
Hopefully it Will work....
I faced that too but then It worked for me when I renamed the configuration file as just "configuration" instead of "configuration.xml" as it was already an xml file.
Object not found issue please help me
Tried time and again Checked and double checked instruction but it always will not find the configuration file.
remove .xml when you rename the file
What is a powershell window
Press "shift plus right click of mouse" then u can see window power shell :)
wowww its very nicee, thank you for tutorr. it worked!!
Thank you man this worked like a charm !
It did not work! At the first when I open the file of the tools and click "continue"
It told me (the installaion of this package faild) can anyone help me????
Check for a double and remove one of them:
It worked🥳Thank you so much!!
Perfect! It works on my Windows 11. Thank you very much.
Great video..👍
I found it a hectic thing to download and install MS Visio until I watched your tutorial..
Thanks Bro..!🌟
Hello, I am stuck. How do i get the command from the description? kindly assist me
@@sigiah u r asking for powershell command, right?
It worked. But then I download the microsoft Office for word, excel and spreadsheeet. And then it did'nt worked anymore.
How can I do it for the 32bit version ?
Thank you so much! This really helps me out with a project for work.
it says couldn't install and that my internet doesn't work but it clearly does as im watching this
Works like a charm. Thank you so much
Im very thankful for this video.. it works.
The version is appearing to be unlicensed, will that be an issue? or will I be able to do basic work without interruption?
Thanks a lot!!
thanks greatly apprerciated works like a charm. First when i edited ade a error with the > then fixed then worked :) Thanks very much i suscribe to your channel best regards
We couldn’t find the specific configuration file. Check the file path and file name
Can someone please help me
I did all I was asked to 😭
having the same issue at the moment, everything works until the last step
hah! just solved it. Someone in the comments below already posted it, try renaming the configuration file to just "configuration" without the ".xml" In some cases the pc already recognises it as an .xml file, so giving it the .xml suffix will just change the name, therefore causing the programm to not recognise the file
@@dieterreteid6365 I fixed it later that day, thanks
do it on administrator mode in cmd
It worked. Thank you so much 🤩
Wow, everything was done so crookedly and cut off that I don’t have the slightest doubt about how it works, and what was blurred out was the ID and could be read there - Visio2019Volume, not VisioPro2019Volume, Visio was downloaded in advance, since there was a fix for such a jump and there gives an error message
Thanks mate, it really works, WOW
I downloaded the Office Deployment Tools and when I logged into Visio it asked for an activation code. I deleted everything and now I can't download the Office Deployment Tools again."404 - File or directory not found. The resource you are looking for may have been deleted, renamed, or temporarily unavailable."
Try Again....🙂
It's not working here
i did exactly the same thing it didn't work what could be the possible reason
Do try again and copy paste the command from here don't type it manually.
.\setup.exe /configure .\configuration.xml
its really working, thank you!
command not supported...
It works very well. Thanks for the tutor
Lots of thanks its downloaded ,so i subscribe and heat the red button 😊❤
It worked thank you bro!😃
TUTORIAL GO CRAZYYYYYYY
not working anymore
Thank you so much it really helped me and worked immediately
Couldn Install?:'
thanks for sharing the procedure, i could install it.
Thank you so much brother, you helped me a lot
it's really work,, thank you, god bless
Thank you very much, you are a life saver
i've error "Command not supported" when i paste in terminal
Try to do it again and paste below command in your terminal.
.\setup.exe /configure .\configuration.xml
it gave me an error
I can't believe :I, God bless you :)
Nice work, very helpful thanks a lot.
error 0-2048?
Thank so much !! that's work for me
so helpful bro thanks❤
It worked. Thanks a lot!
it is not installing....it is giving problem in file or path name
Thanks for your comment!
I think you made mistake while editing xml file.
While editing the xml file the ID in product tag you have to enter id over there which appread on the screen like ID="VisioPro2019Volume".
Hopefully it Will work....
I faced that too but then It worked for me when I renamed the configuration file as just "configuration" instead of "configuration.xml" as it was already an xml file.
Thank you so much sir. It worked.
great job👌
No longer working, please remove
On point tutorial.
worked like a charm!
Thanks a ton brother!
Still works 100%
Worked a treat. Thanks.
coudlnt install
Dont write pro ...write only Visio2019Volume