I ordered them and just received them today. I will post hopefully on Sunday how it all went! I am crossing my fingers, so I find the time to get it done. UP DATE**********************UP DATE******************** I was able to put the Illumi Guards on today (10/06/2024) I must admit they are OUTSTANDING!!! I took the bike out just to ride and see how they work at night. They are amazing and had a few people in cars and some on motorcycles wanting to know where to get them. I found they were easy to install for my bike (Road Glide Special) on the right side. On my left side it was much harder because I had a hell of a time getting the wire in due to having the RockFord Fosgate upgraded radio the wires were super tight to put in... but my tenacity took over and the job was accomplished. If you are thinking of getting them, do it... it is well worth it!!!
I just put these on, they look great! …..suggestion: put a quick connector on the end. If I wanted to take these off temporarily. I’d have to do a complete uninstall.
Bought these do to the look and a seemingly simple installation. They do look great but they didn't come with instructions on putting them on the road king special. Currently sitting here with the headlight out and the throttle side cluster disassembled.
Looks good, but You need to add a quick connector at the end where is the hand guard and do better design to create possibilities to hide the wires inside the handle bars if someone chooses to do so!
Definitely will order a pair of both handguards and LED inserts. Should look good with a set of Handlbars higher than the fairing(i.e. 14 inch). Otherwise, stock handlebar location sets handguards behind the fairing only providing a partial few.
I purchased a set for my Indian. I have to do a little more work because the connection are different. I think what I’ll do I remake the pigtail to go from the JAE connector to a Delphi connector
I orderd for me 2020 road king special and i cant seem to get them to work. Wire harness works woth my normal turn signal but now with these and im lost
You can do it; the connectors are the same. I put them on my Road Glide Special and I have the two on my windshield and the center light on too (Custom Dynamic).
Those are very cool. I just found out, about them, on the website. I was checking out the handguards, for my Sportster, and I saw what I thought was a button to take me to the page but I couldn't get to them. I searched it, and I came across this video. I don't want L.E.D. lighting (or obvious L.E.D. lighting) on my classic looking bike, but I might consider this. I'll definitely recommend it to others, though. I just thought about it. I was was told that you couldn't have two sets of turn signals, at least, in the front, because of a lack of power for them all. How are you able to run these along with the stock one, with enough power? Also, would thes work with my smart triple play module from Custom Dynamics?
I will when I get one in...but its easy. run the wires down the same way, go under the fairing going along of the handlebars. Take off your blinker assemblies, 2 acorn nuts, push the wire connector through the hole, plug in the splitter, plug in the turn signals and put it back together. zip tie your wires off making sure you have plenty of wire loose in there to turn full turn both directions. and youre done.
You're about the 100th person to say that and I laugh every time I read it..I just don't hear it, asked my wife and she said no...but it can't be counted out as I hear a lot. LOL thanks foe checking out he video Eric!
Those are an absolute must in my opinion. Hand protection, additional well seen lighting...
Win win.
I ordered them and just received them today. I will post hopefully on Sunday how it all went! I am crossing my fingers,
so I find the time to get it done.
UP DATE**********************UP DATE********************
I was able to put the Illumi Guards on today (10/06/2024) I must admit they are OUTSTANDING!!! I took the bike out just to ride and see how they work at night. They are amazing and had a few people in cars and some on motorcycles wanting to know where to get them. I found they were easy to install for my bike (Road Glide Special) on the right side. On my left side it was much harder because I had a hell of a time getting the wire in due to having the RockFord Fosgate upgraded radio the wires were super tight to put in... but my tenacity took over and the job was accomplished. If you are thinking of getting them, do it... it is well worth it!!!
Glad to see you back! Hand guards look great!✌😇👍
Thank you
New shop looks nice.
I just put these on, they look great! …..suggestion: put a quick connector on the end. If I wanted to take these off temporarily. I’d have to do a complete uninstall.
A quick connector is a must. Otherwise it it’s not a complete good designed product….
Would have like to see you install on your street glide
These are awesome!!! Can’t wait to install them on my RGST and review them.
I guess I'm too anxious. It doesn't look like they're on the site yet as of 10:57 am Eastern on 19 December 2023
LOL that two of us. Went right to the site after I watched this video. 😂
@@rickyhawkins7407 I hit up their customer service chat. The Alumi Guard LED Inserts will be available on the website this Friday.
@@TobyNorthEN thank you. Appreciate the info. 👍🏽
Should have read this reply first. Thank you for the info.
We will release it on the website this Friday, Please stay tuned
I've been waiting for them to announce these after the sneak peak of them in a short on a full tin swap set.
Bought these do to the look and a seemingly simple installation. They do look great but they didn't come with instructions on putting them on the road king special. Currently sitting here with the headlight out and the throttle side cluster disassembled.
Looks good, but You need to add a quick connector at the end where is the hand guard and do better design to create possibilities to hide the wires inside the handle bars if someone chooses to do so!
Do they make them for the 2024 Low Rider ST?
Would be interested in how they could be used as a turn signal eliminator on a road king special
Question. I do not need the provided splitter for the 24 newer road glide correct?
Definitely will order a pair of both handguards and LED inserts. Should look good with a set of Handlbars higher than the fairing(i.e. 14 inch). Otherwise, stock handlebar location sets handguards behind the fairing only providing a partial few.
I got this for my 21 LRS. I still need a turn signal relocation right? Where to connect the lights though?
Those are so kool I am getting a pair
I purchased a set for my Indian. I have to do a little more work because the connection are different. I think what I’ll do I remake the pigtail to go from the JAE connector to a Delphi connector
You can put these handguards on Indians? I need to tell a few people, if that's the case. Is what you're doing, for the lighting inserts, difficult?
@@RayfordRaySiegel you just have to drill the mount up holes out slightly larger. As far as the wiring, I’ll let you know when I cross that bridge
@@michaelbailey4455,
Cool deal
Thanks
I have the hand guards in both of my bikes. This is great. I don’t really like the rubber. I want them. I want them. 😂😂😂😂🎉🎉🎉
We will release it on the website this Friday, Please stay tuned
I orderd for me 2020 road king special and i cant seem to get them to work. Wire harness works woth my normal turn signal but now with these and im lost
I think they are a great Idea , And a real Safety feature that people should really look in to . Thank you for the how too.
How will they hook up if you are running custom dynamic lights for turn signals and windshield lights?
You can do it; the connectors are the same. I put them on my Road Glide Special and I have the two on my windshield and the center light on too (Custom Dynamic).
Those are very cool. I just found out, about them, on the website. I was checking out the handguards, for my Sportster, and I saw what I thought was a button to take me to the page but I couldn't get to them. I searched it, and I came across this video. I don't want L.E.D. lighting (or obvious L.E.D. lighting) on my classic looking bike, but I might consider this. I'll definitely recommend it to others, though. I just thought about it. I was was told that you couldn't have two sets of turn signals, at least, in the front, because of a lack of power for them all. How are you able to run these along with the stock one, with enough power? Also, would thes work with my smart triple play module from Custom Dynamics?
Nice 👍🏽
Will you have a video for a street glide faring? I’m sure it’s much different than the road glide type fairing.
I will when I get one in...but its easy. run the wires down the same way, go under the fairing going along of the handlebars. Take off your blinker assemblies, 2 acorn nuts, push the wire connector through the hole, plug in the splitter, plug in the turn signals and put it back together. zip tie your wires off making sure you have plenty of wire loose in there to turn full turn both directions. and youre done.
@@Advanblack thank you and I’m ordering now.
Nice feature. Does Advanblack also sell the carbon fiber hand guards like on the demo bike?
Yes, we will, please stay tuned
I do not see them on the website, when are they coming out???
We will release it on the website this Friday, Please stay tuned
I will be all over them@@Advanblack
Dude sounds like a southern fried John Goodman. "Smoky, this isn't Nam, man. There are rules. " 😂
You're about the 100th person to say that and I laugh every time I read it..I just don't hear it, asked my wife and she said no...but it can't be counted out as I hear a lot. LOL thanks foe checking out he video Eric!
Link to purchase please, my handguards supposed to arrive tomorrow. Been waiting and now this
Harley bagger parts. Search function at the bottom
We will release it on the website this Friday, Please stay tuned
It would be nice , if yall offered products for Indians as well.