I have successfully installed the images in my EVE-NG also we need more videos about EVE-NG to explain more about many topics, thank you sir for your video
Hi thanks for video,very clear. I would like to understand why when the router starts up then the putty session does not open for me. I click on the router, the instance starts but the session does not open. Thanks
Hi, thank you for all the tutorials for Eve-NG they are really helpful. I have question, do I have to write the fixpermissions command everytime I upload any image or I can do it once and it is fix for any future uploads ?
Great video. Thank you for your help. However , i did not see the image for the L3 Switch. i see it in your presentation but not in the drive . Please advise
first thank u for ur great video, but i try to open the cli like u did in the video, the browser(firefox,chrom,brave) ask me if i open telnet progs, then nothing happens ... am using mint distro !
Routers working properly but facing issue with L2 and L3 switches... whenever I start the switches it turns off automatically within 5 seconds. Even I can't access the cli modes of the switches.
I have successfully uploaded the images of router and switches shown in the vdo, after login into eve-ng, I added those nodes , but unable to open telnet, pls help
Thank you for the video, I tried same as video, After add node l2 and l3 ,, Switch started but automatically it goes to off,,, When open console said, connection refused, Can you guide?
Hello Sir, after Add CISCO L2 and L3 images in EVE-NG then type command line /opt/unetlab/wrappers/unl_wrapper -a fixpermissions. It's show messages below: It's problem or not PHP Warning: File-get-contents(opt/unetlab/platform): Failed to open stream: no such file or directory in /opt/unetlab/html/includes/init.php on line 71
one of a nice manual and explanation, but I have still probloms with switches, they are working properly., ant support and clue, BTW I have search and googled as well no a final solution.
Hi, Could you please check now.? It wad there and the folder is accessible as public. Please follow the same steps as given in the tutorial. Thanks and all the best.
Hi, I followed as you said. But once i start the CISCO IOL node its getting up, but after 10 seconds its doing down automatically. Where did i when wrong, Please help me in this.
@@РамазанАбдулла-ц9ю no instead I installed some other switch image file I forgot the name .. Please remind me tomorrow at 10:00 am ist If you need answers Thank you
Great video! Question....I did the exact procedure here and I seen the nodes loaded into EVE, however, they are greyed out and I cannot click on them. Any idea why that might be? Thanks!
![Digital Circus Episode 4 [TRAILER]](http://i.ytimg.com/vi/abZtsmMUbJo/mqdefault.jpg)
One of the best video for EVE-NG without any BS, only pure knowledge
Glad you think so!
beautifulll man. this worked once after so many failed attempts trying to folllow other tutorials.
thanks for the vide and a million thanks for including link to the image. you saved me alot
Glad you liked it..
Thanks a lot Brother. Keep it up.
Followed the procedure and was able to run the L2 & L3 Switch image for LAB testing.
Best simple Video on EVE-NG
Glad you liked it!
This has taken a long time to come across this wonderful video. kudos bro.
Glad you enjoyed it!
Thank you for this. I can finally do CCNP labs.
I have successfully installed the images in my EVE-NG also we need more videos about EVE-NG to explain more about many topics, thank you sir for your video
Sure..I will be uploading more videos about routing protocols very soon.
Simple precise and straight to the point. Thanks.
Nice video! It helped me install the images. 😄 Now, I’m trying to learn EVE-NG and CCNA in one week. LOL
Good luck! Not that you’ll need it or anything..
Wonderful tutorial and Thanks a lot for sharing a link to download image files
Thanks for watching!
Thank you! Especially to also including a link to the images!
works like a charm. Thanks!
thank you very much my friend, you have got a subscribe for lifetime
Indian dudes always save the day
thanks for sharing, GOD bless you.
Thank you too
Great Video for beginners....thanks for uploading
Thanks Bro, it worked finally switch is working
Glad I could help
Muchas gracias, el video correcto para solucionar ese problema que tenia.
Thanks for the feedback! Happy learning 👍❤️
Thanks bro, that really helped a lot.
Glad you liked it.! Thanks for watching.
Hi thanks for video,very clear. I would like to understand why when the router starts up then the putty session does not open for me. I click on the router, the instance starts but the session does not open. Thanks
good video , it is short and to the point .
Glad u liked it.
Hi, thank you for all the tutorials for Eve-NG they are really helpful. I have question, do I have to write the fixpermissions command everytime I upload any image or I can do it once and it is fix for any future uploads ?
Hi, Hope you are doing great,
For every image installation in EVE-NG you need the fix permission command.
thanks for the video, very useful
Great video, You are genius man. I appreciate you. Your video is really helpful for me.
Big thanks 🔥 💥 💥
Glad you enjoyed it!!!
Thanks a lot for your kindness , God bless you
Thanks alot really helpful solved my problem Thanks a alot
Glad it helped
great bro.well explained
Thanks bro!
thank you very much. it worked
what are the linux l2, linux l3 and sw firmware images?
finally some joy 😸
Thank you soo much !
Excellent Video in very easy simple steps with shared image file which helps a lot. Thanks @DynamicCoder
Thanks!! i do suscribe to your channel.
Welcome!
great video man, helped me a lot. One quick question, how can i import more routers, example asr920 to have gigab interface etc
Glad you liked it!!
Quick noob question-
Can I upload to my simulated devices-- normal Cisco IOS, instead of VIRL IOS?
Love it, thank you very much.
I don't see the L3 image in the google drive file only the L2 image
Could you please have a look now!
Great video. Thank you for your help. However , i did not see the image for the L3 Switch. i see it in your presentation but not in the drive . Please advise
Hi Gervens,
Good day,
Could you please check now!! Thanks for watching my video..
do u resolve the problem?
Thanks it worked 🙂
You're welcome!
Hello, I have a problem, when I launch the switch L2 no worries, I have a switch but when I launch the switch L3 I have a router, normal?
mee too
Thanks for the video
IOL procedure is not correct. L2 & L3 switches are not running.
Not working at all.
do u resolve the problem?
man u helped me bro
Respect
Thanks bro!
first thank u for ur great video, but i try to open the cli like u did in the video, the browser(firefox,chrom,brave) ask me if i open telnet progs, then nothing happens ... am using mint distro !
Routers working properly but facing issue with L2 and L3 switches... whenever I start the switches it turns off automatically within 5 seconds. Even I can't access the cli modes of the switches.
try running the fix permissions command again
do u resolve the problem?
@@РамазанАбдулла-ц9ю yes I solved the issue.
@@BeerGeekNY Not all heroes wear capes
Thanks
me too i tried to run again the fexpermissions command but still the switches dont work
can u help me? when im trying to run cisco "cisco IOL" as u did in the video, putty shows "network error: software caused connection abort"
Thanks Mate
You're welcome!
good explanation and video
any idea to resolve the problem when you execute /opt/unetlab/wrappers/unl_wrapper -a fixpersmission .. the result is permission denied ..
I have successfully uploaded the images of router and switches shown in the vdo, after login into eve-ng, I added those nodes , but unable to open telnet, pls help
Very useful thanks a lot
thank you 🤩🤩
You’re welcome 😊
Good video
Hi Dynamic Coder, the Cisco IOL (L2 & L3) is not working. It automatically stops after I start it for 5secs.
Thanks friend
Any time!
thx mahn for the linnk
Thank you.
The L3 switch image is missing though!
up
Updated. Please check now!!
BIG thanks you bro
Any time
Where I’ll get this image files ?
Does .bin file works ?
Thanks mate
Happy to help
Obrigado!
loading as a router how to fix it. Switch commands not working.
how to enable gig port in switch? can't find
the switch images dont work for me but the routers do..
Thank you for the video, I tried same as video, After add node l2 and l3 ,, Switch started but automatically it goes to off,,, When open console said, connection refused, Can you guide?
do u resolve the problem?
Hello Sir, after Add CISCO L2 and L3 images in EVE-NG then type command line /opt/unetlab/wrappers/unl_wrapper -a fixpermissions. It's show messages below: It's problem or not
PHP Warning: File-get-contents(opt/unetlab/platform): Failed to open stream: no such file or directory in /opt/unetlab/html/includes/init.php on line 71
I can add node in eve-ng but i don't know working or not
one of a nice manual and explanation, but I have still probloms with switches, they are working properly., ant support and clue, BTW I have search and googled as well no a final solution.
iol images not working properly can you help me out?
Hi, I think you have missed giving permissions to your image. Please go through the whole video.
@@dynamiccoder1924 the issue was not about permissions it was about license I resolve it thanks
@@MrAhmadg387 how to resolve ??
@@MrAhmadg387 please how did you resolve it. mine is still not working. Didn't see what he did with nano command
@@BelieveNduka make sure the license file isnt saved as a text file when you transfer it
L3 Image is not on Drive...But great content and thanks for helping!
Hi Wessal,
Good day,
Could you please check now!! Thanks for watching my video..
L2 images are not working
do u resolve the problem?
while double clicking to start, it's not opening
thanks, L3 BIN file is missing in the folder.
Hi Ahmed,
Hope you are doing great,
Could you please check now!! Thanks for watching my video..
Hello Brother, i didn't see L3-ADVENTERPRISE file in your google drive?
Hi,
Could you please check now.? It wad there and the folder is accessible as public.
Please follow the same steps as given in the tutorial.
Thanks and all the best.
@@dynamiccoder1924 Not working at all.
Hi,
I followed as you said. But once i start the CISCO IOL node its getting up, but after 10 seconds its doing down automatically.
Where did i when wrong,
Please help me in this.
did u resolve the problem?
@@РамазанАбдулла-ц9ю no instead I installed some other switch image file
I forgot the name ..
Please remind me tomorrow at 10:00 am ist
If you need answers
Thank you
Great video! Question....I did the exact procedure here and I seen the nodes loaded into EVE, however, they are greyed out and I cannot click on them. Any idea why that might be? Thanks!
Hi same.issue
Is it solved ?
@@mrbanerjee1903 Still having the same issue unfortunately
Tuto execute them properly my problem is solved
Execute by cli or by gui in ur winscp
Hello brother, Why no see L3?
Updated! Please check now!
Hi bro
What's up?
Its starting but after few seconds its stop
l3 switch image is missing
Hi Rajesh,
Good day,
Could you please check now!! Thanks for watching my video..
switches l2 and l3 turn off after few second. need help
do u resolve the problem?
SIr My Switch is going to stop just after I started. Please help me how to resolve this issue.
do u resolve the problem?
no shuc file or directory
There is something wrong !!
router and switches dont comeup
Hi Please help me, i have followed every step but my devices wont turn on
Hi, good day,
I request you to please watch this whole video again and i think might be your have not given permissions in winscp.
Thanks
@@dynamiccoder1924 i did run the fixpermissions command and it executed successfully. I dont know where im missing it i really need to get to work
Image Khan sai milenge image hi nhi mil rhe
It's not switch L2. It's wrong
Bro its not starting in EVENG
Hi,
Could you please watch this video and check u gave permission in wincsp n follow the procedure..
Thank you! Especially to also including a link to the images!
Glad it was helpful!
thanks for your help!
Thanks!!
I'm grateful for your feedback
thanks a lot 😀
how to add fastethernet port to th switch?
Thanks you!!
You're welcome!