Do they allow a die grinder to feather stops and starts on that test? Also, do you have to switch hands or are they cool with using your right all the way?
About dam time somebody did a real heater test!!!!!!! My company has one even harder than this one it’s a actual convection box simulator!!!!!! Great job really glad to see young men welding and passing on great information!!!!!
Ive been tig welding pipe just over 30 years now. You are a master at your craft brother!!! Key word you used that i like is do whatever your comfrotable at. 100 correct no 2 welders are the same
Them convection boxes aint no joke man. Especially when they have them 3" and its stupid tight. I know how much it sucks to xray them because thats what I do, idk how they do it sometimes. It Especially sucks when they gotta go back and repair one when they done already got a few rows ahead. I done see them have to cut some welds out to go back for a repair. Respect to you guys that do it though.
I have to say, this is olympic level welding. Mad respect. I chase rigs in Texas and have had to lo-hy in these positions (non x-ray) and that's hard enough. To do this and have it shoot 100 is f@#$ing crazy. I hope to be as good as this man some day.
Not bad I like how u demonstrate that..I do jobs alil bit more difficult on nuclear power submarines..try it sometime.but I applaud all welders for our skilled craft
Slick I work outta Kings bay shipyard prob head to Newport News some day hit me with your info somehow have to grab a beer while there and shoot the shit for a bit...we hit every sub base in the country was just at Portsmouth shipyard up in Maine for a year
Very good job Rocky and high skill technical work on restricted pipe welding I hope all the new Young generation of welders follow you welding techniques 👌👌
Nice . But . I want to challenge you To use 2.4 mm filler rod carbon steel weld from root to capping , in oil and gas malaysian industry. We not use 3.2 filler . All site and test (WQT)use 2.4 filler rod . I waiting that vdio 🤪
I remember doing a panel like that with grade 11 no purge. You talkin about hard shid. Man you better be ambi. Can get the root but the cap was ooouuuu.
Outlaw leather. But for some reason they don't make them with the flip front like his has. I'm curious if he had it custom made by outlaw or he modified it himself.
Put in link's to the merchandise for us to buy! Ask the owners if you can and you might even be able to make some money off it too. Also just a tip: during the welding process, if you find that you HAVE to pop off for whatever reason and you don't want to leave a tie in, leave the rod attached to the puddle. When you come back and heat up, when you heat up the puddle, you also heat up the tie in point giving you a good and clean tie in.
Become a helper or apprentice, or try your hand in tradeschool/tech school- move on to practicing more advanced stuff like this or pipefitting.. high dollar welding has a long time investment! What I wouldn't give to be a golden arm!
Vai ami Bangladeshi ami apnar sob video dekhi apnar sob video e vallo kintu vai porer video ta 4g pogison a-x root pass hot pass fillyp kevin pass sob gula niya akta videi dekh te chai vai asha kori apne video bana ben amar lekha bhujte parben na tai >>> GOOGLE TRANSLATE USE KOREN🗣️🗣️🗣️
👇WeldTube Store👇
www.weldlife.com
I like how detailed he was need more videos like this
Do they allow a die grinder to feather stops and starts on that test? Also, do you have to switch hands or are they cool with using your right all the way?
About dam time somebody did a real heater test!!!!!!! My company has one even harder than this one it’s a actual convection box simulator!!!!!! Great job really glad to see young men welding and passing on great information!!!!!
I know what I’m going to start practicing!!! Going to build one of these now! Great great job boys awesome video.
Ive been tig welding pipe just over 30 years now. You are a master at your craft brother!!! Key word you used that i like is do whatever your comfrotable at. 100 correct no 2 welders are the same
Good Job Rocky describing how to prepare the fit-up and how to work with the obstacles being in the way. Very well detailed! Keep up the good work 👍
My boy rocky doing his thing! looking forward to more of your features on the channel
Finally. I've been eager to take a box test lately. I've always heard it was the hardest test
This boy really getting to the money. 💰
This guy is super impressive.
Damn good job ol son. Need more videos with this lil guy rocky
escellant tutorial. I am 72 and strongly advise all young men working as you do top use knee pads or kneeling pad. my knees still work pretty good.
Awesome video, great instruction. Very clear in his process and really explained everything so thoroughly.
Bout time somebody showed some field welds.
Slick hand right there💯 keep up the good work Rocky
Them convection boxes aint no joke man. Especially when they have them 3" and its stupid tight. I know how much it sucks to xray them because thats what I do, idk how they do it sometimes. It Especially sucks when they gotta go back and repair one when they done already got a few rows ahead. I done see them have to cut some welds out to go back for a repair. Respect to you guys that do it though.
Doing those side crunches all the time, one came come out with V-Cut abs lol
Job well done Rocky!!
very impressive that was an excellent job
Pro level pipefitting bout damn time thanks for the great video and keep it up
Good deal , also looks like the physical size of the welder plays a part into the dynamics too lol lol
Wow that outlaw hood is sweet great welding brother
@weldtube hire this kid and bring him on the show more
Oscar Montes i know thats right
They would never pay him what he actually makes out in the field as a specialty welder making double time 💰
I have to say, this is olympic level welding. Mad respect. I chase rigs in Texas and have had to lo-hy in these positions (non x-ray) and that's hard enough. To do this and have it shoot 100 is f@#$ing crazy. I hope to be as good as this man some day.
yo this man is nuts, I would somehow short the rod just trying to backfeed it across the pipe like that.. it's not even in the box yet..
Not bad I like how u demonstrate that..I do jobs alil bit more difficult on nuclear power submarines..try it sometime.but I applaud all welders for our skilled craft
Who you work for on the subs?
Newportnews shipyard
Slick I work outta Kings bay shipyard prob head to Newport News some day hit me with your info somehow have to grab a beer while there and shoot the shit for a bit...we hit every sub base in the country was just at Portsmouth shipyard up in Maine for a year
@@mikeh8680 word word I was at Kings Bay bou a year ago pose to link back down that way the end of the year..but we gon link tho
How can I hit you with the contact info
He is good! Do more videos with him.
Very good job Rocky and high skill technical work on restricted pipe welding I hope all the new Young generation of welders follow you welding techniques 👌👌
Really good info👍yall need more videos like these
От меня коллега, лайк тебе👍то же приходилось варить подобное. Бывают места и похуже, желаю что бы их было минимум, у всех сварных!!!🤘🤘🤘
Next video.....How to get a welding job during a pandemic 😬
Gotta break them knee pads out
@@nicksmith9434
And maybe a couple of hundreds
Very impressive, great job showing how it's done.
can you give more information on the TIG Hose and TIG Torch having a hard time finding it
wow excellent bro ! how could you done?it's so difficult !
Now that's a test. Too tight for me. Hats off to anyone that can weld in those positions.
Where did you get your Pipe weld practice in? I am.looking for a facility in Houston to work on my 6G, and eventually into specialty welding like this
Anymore info on that “twister” hose?
Esteban Gonzalez weldtec makes them.
Look up “rocker” tig torch
I’m looking up now I been trynna find them
WOW,, wonderful video ,,
Ida been throwing my hood already..good job
How'd you get the outlaw hood with the flip lens?
THANK YOU YOUNG BLOOD!! I'M A MASTER TO KEEP UP THE GOOD WORK!!!!!
Fire video like always boys !
Incredible Job!!!
how would you do it if you couldn't tack on bench? like if half was in place and setup and tacking was done in the box?
The video is about welding on tight spots, not about fiting pipe on tight spots
@@goldeneagle_wld245 she is talking about if the test requires you to tack it in the box genius.
Nice . But . I want to challenge you To use 2.4 mm filler rod carbon steel weld from root to capping , in oil and gas malaysian industry. We not use 3.2 filler . All site and test (WQT)use 2.4 filler rod . I waiting that vdio 🤪
Where can i find that twisted hose for a 200 amp rig
💪🏼 my boy rocky!
I can't seem to find that welding hood with that thick band on Outlaw Leathers website.
Could you please explain (show) the difference beween the LIGHTNINGMTS 225 and the POWERMTS 221SI.
How can I get a south coast welding shirt those black badass ones
Dam, this dude got skills!!!
Great vids. How about a titanium oil boss on an A-10 aircraft engine with a mirror. No other way to see it.
Dang man, u are really good
Great job.
interesting video👍👍 never seen this before.
I remember doing a panel like that with grade 11 no purge. You talkin about hard shid. Man you better be ambi. Can get the root but the cap was ooouuuu.
Good job sir 👍👍
Can yall get the outlaw leather hoods OSHA approved?
are those aluminised cup, and if where to require it
Awasome broo
Nice vidio
Big like 👍👍👍
Very good teacher palese more video
Please tell me where to buy your black leather weld face
Outlaw leather. But for some reason they don't make them with the flip front like his has. I'm curious if he had it custom made by outlaw or he modified it himself.
Great skills Thanks
You my boy blue!!!
Shit like that is tough on a big man ,
Short slender guys have a slight advantage
Hi , where do i find those leather hoods ? Thank you.
Did he put 4 tacks in a box test??
Are you worried about shrinkage with that big of a gap?
Hey where do I find the swivel hose connection or the swivel power cable tig hose? I’m a union boilermaker and really can see use in this. Thx IBBL40
The rocker by weldtek
U a Boilermaker great job n men me to but I dept till get u one
amazing!
Where did you get the “twister hose?”
so, guys u r amazing, keep it up 🙌🏽
Where can I get that small yellow hood?
La laja gro style 💪
Is it bad if we would “walk” that instead of free hand ?
Its alot easier if you free hand it. Instead of walking it.
3.2 filler No need to supply more . But use 2.4 filler . U need tu supply more and need consistent supply to welding pool .
damn that was really impressive props man i wanna learn how to do that awesome!!!
Made it look ez!
Put in link's to the merchandise for us to buy! Ask the owners if you can and you might even be able to make some money off it too.
Also just a tip: during the welding process, if you find that you HAVE to pop off for whatever reason and you don't want to leave a tie in, leave the rod attached to the puddle. When you come back and heat up, when you heat up the puddle, you also heat up the tie in point giving you a good and clean tie in.
Damn that looks hard.
Leland Holton fuck yeah it does..you heard the guy tho. Big money..double time!! 🤑
Te quedo buena axell
Where do you get that twister hose
The rocker by weldtek
my question is how do i get up to that point where do i even find a job to start
Become a helper or apprentice, or try your hand in tradeschool/tech school- move on to practicing more advanced stuff like this or pipefitting.. high dollar welding has a long time investment! What I wouldn't give to be a golden arm!
@@Gu1tarZer0 thats the thing lol everyone says that but i been looking as a helper and they one 3 yrs of experience even tho i went to school for it
Esta bien estas aprobado!!
My head wouldn’t fit in that box 😂
❤️
You do not use the foot peddle?
Nope not on this type of work usually scratch start. 👊🏾
Only playing my guitar
Boilermakers 🇺🇲⚒️🇺🇲🛠️⚒️🇺🇲
Vai ami Bangladeshi ami apnar sob video dekhi apnar sob video e vallo kintu vai porer video ta 4g pogison a-x root pass hot pass fillyp kevin pass sob gula niya akta videi dekh te chai vai asha kori apne video bana ben amar lekha bhujte parben na tai >>> GOOGLE TRANSLATE USE KOREN🗣️🗣️🗣️
You know you’re good when you wear white on the job
говорят если фаски внутри зачищать то варится лучше
and they say machines are gonna replace welders watching this i doubt
Why don't u show the root??
how old is he?
Cade Templet 24
rocky aviles ey bro where did you buy that miller head? You a jam up welder bro 👨🏽🏭
#FlattenTheCurve
Sharpening tungsten on a cutting wheel with no saftey glasses....
🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
Wats his name on ig
over price outlaw leather hood
That’s not even a real box test.
2:20 no safety glasses smh