You could cut holes for the word to your radio boxes so the wires are behind and not routed down from the top. You could also make trim pieces to cover the wire outlets. A heavier first coat of paint helps avoid that streaky look you were fighting.
Hi travistucker. Yes, this ground control station needs room for improvement. This is just the basic setup for something functional. I routed the cables on top as I may need to extend the radios on a tripod for later long range setup. As for the paint, your right. A thicker primer would have a better outcome. Thank you for the recommendation. And thank you for watching.
@LyndonsWorkshop no hate. I meant nothing bad. I'm just trying to give some tips. I think you did really well. I was going to type that, but my kid got her arm stuck in the gate, and i clicked post, i even thought about it after. Such is life.
@LyndonsWorkshop if you were going to use longer cables on occasion, you could use surface mount connectors and cables from here to there. Many solutions, really. Painting is never fun to me, i always have to do 30 coats to get the look i want
@@travistucker7317 . Not at all. I welcome tips. That’s how I learn by adapting to other people’s ideas. This video was actually taken 5 years ago and only able to post it this year after a much needed rest from work. I just post it to add on to my collection of videos and was amazed it got thousand of views. I just don’t understand how youtube algorithm works. Take note I am 5 years younger than my other videos.😁
Yes, I wanted a bigger and better monitor also but is limited to my area as the laptop is blocking. For a bigger monitor you may need a wider case for more space.
Can you fly the drone with that software, I'm a noob, and know pretty much nothing about this stuff. Buy I purchased a 600$ anaconda plane from ready-made rc and been trying to figure out what I need to fly this thing. I also got a speedy bee f405 flight controller to put I nav on. Have no clue how to do any of this stuff lol just been sinking money into all this gear. But I'm old and want to fly with a joystick.
@@billyjackswildamerica6326 I don't know but I download some software called "drone simulator" I'm using that to learn how to teach my self the super fine motor skills needed to fly a drone in a small space with out breaking stuff in the real world.
Hey i love the video just one problem i don't know what the name of any of the pieces you're using😔 or where you got them can you make a video or list of where you got all the equipment also i love you're channel👍
Is there another video showing the tx rx devices that are required and how to actually control and receive telemetry from a plane or quad? Can I use my rm pocket as the tx and rx for mission planner?
Youll need separate telemetry modules and set it up on mission planner. I think ur wanting to take telemetry data from ur rm and use that with MP but i dont think MP is set up that way.
@Emillsmailov. Thank you. I’m just using a generic one I got from amazon. I think they are just rated 400 meters distance. But you should be able to get longer distance telemetry radios depending on your application.
Hi Hazimjamil. I bought it at harbor freight. The model is Apache 4800. It’s roughly around 20x15x8 inches. It would be nice if you go with the models with wheels.
Hey, I've been flying model airplanes since the 90's and I'm very familiar with current transmitter/receiver tech. I'm trying to figure out how Ardupilot works with a ground station like this in conjunction with a 2.4Ghz transmitter. I know you can run Ardupilot from a windows based PC and code custom buttons and joysticks and what not. But why are you burying a transmitter in the bottom of that case and why do you have an elastic holding the right stick up like that? Does that transmitter override any commands sent from the PC or something?
Hi AnthonyCelata. I'm flying my quadcopter with a telemetry radio only, to run my experiments. Although recommended to have the 2.4Ghz transmitter as a backup, it is not necessary due to existing failsafes (such as return to launch, etc.)if signal is lost. I did include the 2.4Ghz transmitter in the video just to show the sufficient storage space below but I'm not using using it during flight. Also the rubber is just to pull the stick to the side as it is protruding.😁
Hi GoldenCoastGTA. If you are into ardupilot or pixhawk based drones(Quadcopters, fixed wings, rover). This is a control station to command your drones.
@@urPainYT . I’m not an expert on drones but I’ll try to share my experience along the way on this field as raw and understandable as I can. I try to show the hobby not just the success but also the failures. Thanks.
So basically you made a laptop case to hold everything, but you can't take out what you want, because everything is screwed down. How is that better than just a laptop bag, where you only take out what you need at that moment? This makes.....no sense to me.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Now build a table that doesn't wobble like a jelly 😁
Yes. I finally got rid of that pvc table. 😂
Lol😅lol😅 u know u wrong for that one hahaahahahahah tooo funny
Well done man! Amazing work, this content is unbelievably underrated
@apollonpotoudis9337. Thank you. Just sharing my hobby to fellow creators out there.
It looks super Dope, well done
Thank you. And thank you for watching!
You could cut holes for the word to your radio boxes so the wires are behind and not routed down from the top. You could also make trim pieces to cover the wire outlets. A heavier first coat of paint helps avoid that streaky look you were fighting.
Hi travistucker. Yes, this ground control station needs room for improvement. This is just the basic setup for something functional. I routed the cables on top as I may need to extend the radios on a tripod for later long range setup. As for the paint, your right. A thicker primer would have a better outcome. Thank you for the recommendation. And thank you for watching.
@LyndonsWorkshop no hate. I meant nothing bad. I'm just trying to give some tips. I think you did really well. I was going to type that, but my kid got her arm stuck in the gate, and i clicked post, i even thought about it after. Such is life.
@LyndonsWorkshop if you were going to use longer cables on occasion, you could use surface mount connectors and cables from here to there. Many solutions, really. Painting is never fun to me, i always have to do 30 coats to get the look i want
@@travistucker7317 . Not at all. I welcome tips. That’s how I learn by adapting to other people’s ideas. This video was actually taken 5 years ago and only able to post it this year after a much needed rest from work. I just post it to add on to my collection of videos and was amazed it got thousand of views. I just don’t understand how youtube algorithm works. Take note I am 5 years younger than my other videos.😁
@@travistucker7317 I get you. Painting and glueing is not fun. I just dont have the patience to wait for the next coating.
That’s awesome , I’ve been looking for something like this, I want the same thing except a larger monitor
Yes, I wanted a bigger and better monitor also but is limited to my area as the laptop is blocking. For a bigger monitor you may need a wider case for more space.
where does the controller and external antenna plug in
Simple and smart build👍
"I then spray painted it black to make it look intimidating." LOL love it.
@scardoso95. Thank you for watching. I’m glad some people see my humor. 😁
I like ur subtle humor
Nice video shot, well done, thank you for sharing it with us :)
Your welcome. Thank you for watching.
Nice dude!
Thank you
Open question. 05:28 what software is on the laptop for drone monitoring?
Sorry for the late reply. I used mission planner for the telemetry. You could also use Qgroundcontrol as what engineers usually use.
Can you fly the drone with that software, I'm a noob, and know pretty much nothing about this stuff. Buy I purchased a 600$ anaconda plane from ready-made rc and been trying to figure out what I need to fly this thing. I also got a speedy bee f405 flight controller to put I nav on. Have no clue how to do any of this stuff lol just been sinking money into all this gear. But I'm old and want to fly with a joystick.
@@billyjackswildamerica6326 I don't know but I download some software called "drone simulator" I'm using that to learn how to teach my self the super fine motor skills needed to fly a drone in a small space with out breaking stuff in the real world.
I have been slowly working through a similar process with my Talon Pro! Anything specific?
@camcoltravel2518 Nope, Just thought this was cool.
Hey i love the video just one problem i don't know what the name of any of the pieces you're using😔 or where you got them can you make a video or list of where you got all the equipment also i love you're channel👍
what about just just the ground station with antennas?
Nice job
Well done man - very impressive - but what was the total cost in the end?
Hi! What epoxy did you use?
Is there another video showing the tx rx devices that are required and how to actually control and receive telemetry from a plane or quad?
Can I use my rm pocket as the tx and rx for mission planner?
Youll need separate telemetry modules and set it up on mission planner. I think ur wanting to take telemetry data from ur rm and use that with MP but i dont think MP is set up that way.
ur still using a very old th9x! cool
Adapt a joy stick. There are a lot of private pilots who has not grown up gaming.
Great work! What telemetry radio are you using?
@Emillsmailov. Thank you. I’m just using a generic one I got from amazon. I think they are just rated 400 meters distance. But you should be able to get longer distance telemetry radios depending on your application.
looking details.
😍😍😍😍🤩🤩🤩🤩
Do you have a list of the components you used?
do you have a video who to connect it with your drone with mission planner?
Its done thru his telemetry module to the left of his vtx. He has it wired to his laptop
I meant vrx not vtx
Now he can start All Nukes.
can you please make another video for testing phase
Hey can get ur help with something like this? I got some questions and I can't seem to get anyone to help me with em or where to go and get the help.
What ?s pretty much everything is available with a google search
Hi, can i have your box sizing?
Hi Hazimjamil. I bought it at harbor freight. The model is Apache 4800. It’s roughly around 20x15x8 inches. It would be nice if you go with the models with wheels.
it was a holy ghost rock and roll in jesus name
Ground Control to Major Tom - David Bowie
Sub.
Whered the monitor come from
Hi aaronmarkstaller. It’s s as cheap one from amazon. I’m sure there are better ones now a days.
Hey, I've been flying model airplanes since the 90's and I'm very familiar with current transmitter/receiver tech. I'm trying to figure out how Ardupilot works with a ground station like this in conjunction with a 2.4Ghz transmitter. I know you can run Ardupilot from a windows based PC and code custom buttons and joysticks and what not. But why are you burying a transmitter in the bottom of that case and why do you have an elastic holding the right stick up like that? Does that transmitter override any commands sent from the PC or something?
Hi AnthonyCelata. I'm flying my quadcopter with a telemetry radio only, to run my experiments. Although recommended to have the 2.4Ghz transmitter as a backup, it is not necessary due to existing failsafes (such as return to launch, etc.)if signal is lost. I did include the 2.4Ghz transmitter in the video just to show the sufficient storage space below but I'm not using using it during flight. Also the rubber is just to pull the stick to the side as it is protruding.😁
Can you share the build parts list?
mans using the titan sub controller 💀
Detail your description, what you used, the purposes.
Hi GoldenCoastGTA. If you are into ardupilot or pixhawk based drones(Quadcopters, fixed wings, rover). This is a control station to command your drones.
Can someone hack the controlling system of drone i mean like Stealing the drone?
eyy 70th like, because 69 is..
@Pain-wo6oh. Thank you.
@@LyndonsWorkshop btw, thanks for giving me a project in the near future, because I'm interested on flying an diy fighter jet auv replica.
@@urPainYT . I’m not an expert on drones but I’ll try to share my experience along the way on this field as raw and understandable as I can. I try to show the hobby not just the success but also the failures. Thanks.
So basically you made a laptop case to hold everything, but you can't take out what you want, because everything is screwed down. How is that better than just a laptop bag, where you only take out what you need at that moment? This makes.....no sense to me.
Hi mierbeuker8148. Thank you for watching. I used thumbscrews for easy access to the bottom.
LO PRIMERO SON UNAS TABLITAS CON PLASTILOCA DE SOPORTE...
Hey can get ur help with something like this? I got some questions and I can't seem to get anyone to help me with em or where to go and get the help.
Sure. How may I help?