I have a problem big problem my vga hdmi and dvi just died in this fucking second on my HD 5450 its an old card it's OK but ym cpu is r5 3400g I am not using it cuz my pc was on any litgting striked near my house and hdmi died on mobo after that I was using dvi d for vega 11 after 20 days it just froze and died like that's it.. And what the hell is problem my mobo was 3 times in the shop for repair where I bought it but every time they would say its working idk what is problem with
Was completely stunned as I had this issue before and all I needed to do was wipe my ram with a cloth. I tried it this time round and nothing happened. After watching this video I tried with a rubber/eraser and it worked. Thanks a million 🙏
The best one I had was the monitor was moving through the menu options and would not stop. The customer had put the computer speakers under the monitor switches on the bottom of the screen. Moved the speakers and it worked. Easy Money. The cables are the first and most of the time the issue. Great video.
Thank you, I knew my monitor and cables were good and I knew I was using the correct port but I could not get any picture. I just moved coast to coast across the country with my PC and feared the worst. After digging around in there following your guide I’ve finally got picture again. Thank you!
I had just gotten a new computer and put in a larger hard drive and more RAM... got it all fixed and was so proud of myself and then this problem came up... ready to SCREAM!!!! Finally realized that the RAM wasnt seated well enough... took them back out and put it back in and heard the snap and BOOM perfection!!!! THANK YOU!!!!!!!
I thought I effed up my pc before watching this video but you reminded me that I took out my ram. So I checked to see if it was down all the way, it wasn’t so thanks and I’m subbing
saved me so much time after my first build! i had the HDMI plugged into the motherboard instead of the GPU and didnt figure it out until after watching your video after tearing it apart and putting it back together 3 times lmaooooo
I literally did the same thing, tried different HDMI cables, different monitors and I’m like WTF 😂 I watched this video and realized I didn’t have it plugged into my graphics card port but the port further down 🥴
I just changed new VGA 2070 super (Asus prime h310 M-E +i59400f ) work fine with DP TO DP monitor and 2 days after I decided to upgraded motherboard to Asus z490p +i5 10400 PROBLEM NOW DP TO DP MONITOR "NO SIGNAL "
Thank you so much, i was panicking why my conputer was black and i checked everything but the power adaptor. I was watching tons of tutorials on how i can fix the monitor, but they never mentioned anything about power adaptor. You saved me!
All I did was unplug the computer and plug it back in. Now I get a “no signal” message every time I turn it on. 3-Month Update: I didn’t turn the pc on. I’m an idiot.
@@lostyplayz2799 thanks for the tip but I actually figured it out, so what happened was that when I moved my computer it somehow uninstalled Intel and Intel drivers which didn't allow my VGA monitor cable to connect to my PC properly after installing that it fixed 😔
Brian - please do one of these where an ALL in One machine is being used. I get nothing on the screen at all, all black. The machine does appear to start and it's an HP.
What a brilliant way of explaining this. Thank you. It was simple fix but still needed lot of patience to understand exactly what the problem was. Appreciate it keep posting great videos.
Thanks very much for your assistance. I am 99% sure I tried plugging my display cable into my GPU, and it didn't work. This time I plugged it in, and it brought up a display. Hallelujah! God bless you, sir. For your assistance.
I have absolutely zero clue what to do now. It was working PERFECTLY fine and I went to change my cpu fan, it took minutes. Now everything boots up and I don’t have a fucking display now.
Not sure if this was in it but none of the things worked for me but then I tried unplugging everything in my computer except my main monitor and it worked then I plugged the rest of my stuff once it turned on but when I plugged in my second monitor it said no input again so I just kept my second monitor unplugged until my computer was fully on and it worked fine, I'm guessing since my power/electricity went out that it caused my computer to not give enough power to all my components until it was fully on because I only have this monitor problem when my electricity goes out. So from now on I know what to do
Hey man I just got this 1660 super and I’ve tried everything to stop this flickering in my pc it was fine the first time I put it on and then my screen turned gray and just turned off and everything started flickering I had a 1030 before I just don’t know what to do anymore
Hahahaha, just helped me fix my issue after an hour of trying. Apparently there are two HDMI ports and was connected to the wrong one. Thank you so much.
One thing that wasn't mentioned was the graphics card driver. I was troubleshooting another problem with mine (certain programs would often crash when I tried to either open a file or save a file). One of the solutions that Dr Google came up with was Update Your Graphics Card Driver, and gave instructions on how to get Windows to do that. Fine. Windows searched for drivers online, and then started installing it. Before it finished, the screen just went black. So I had to troubleshoot that as well. After trying online solutions that didn't work, I gave up and got a professional in to get it going again.
@@waterloutwo I don't remember exactly (he did it at my place while I was watching). What I think he did, he managed to boot it into safe mode or diagnostic mode, one or the other, found out what the video card was, downloaded a driver for it and installed it. I think that was the gist of it. At the end of the day, I was wise to get someone who knew more about it than I did to try and solve the problem. It worked.
I cant thank you enough for this video. This is my first time building a pc and I just cant get it to connect to the monitor. I thought it was something with my dvi to vga adapter but I watched this vid and tried to clean my ram using eraser and it works! Thank you once again. I was so scared I did something wrong when i was building this
So i actually cleaned the dust inside my computer and now the signal doesn't work. I don't know if it's a bad analog connection or have I potentially stuffed something while cleaning it?
The one obvious issue not mentioned is if you just updated your video driver with a buggy one. This happened to me tonight. System ran fine until I rebooted, then the no power messaged started floating across the black display. To fix this you need to boot up in safe mode and uninstall the buggy drive or go back to the last good restore point on the pc. You can look online how to reboot in safe mode. In Windows 10 you need to turn off and restart your pc three or more times before the restore screen pops up. You then need to go to the Troubleshoot option.
I just had my rig updated and it's been so long that I've never had an HDMI port in the actual graphics card before. I kept plugging the HDMI monitor cable in the onboard HDMI port and tried three different monitors, two power cables, and two HDMI cables before running to RUclips for help! Thank you for mentioning the two different ports because I'm not sure how long that would have taken me to figure out lol.
Life saver! My HDMI cord was plugged into the wrong spot. That's what I thought, but I needed to shine a flashlight on the back of my PC to see that. 😅
With me it was the CPU. I found out about this after two days of research on the web and by watching countless problem solving youtube videos. You always hope it's something small like a misconnected cable or something, it was a more expensive joke. Thank you for making this video.
So, I'm trying to set my laptop (Asus ROG Zephyrus GX501) up with two other monitors. As long as I just plug in one of them, everything works fine. Once I plug in the third, it doesn't show any signal, though the laptop does detect another plugged in monitor. The monitor also shows that it's connected to a PC, it just doesn't put anything out. Tried different setups - HDMI (monitor) to USB-C (Laptop) HDMI (Monitor) to Adapter to USB 3 (Laptop). Since I want to expand my screen (not duplicate), a splitter won't do any good. The first additional monitor works just fine, no matter which port it is plugged in, the second, however won't. I can use mentioned "second" additional monitor as the only additional just as well, then it works fine. So it's not defective.
I want to sincerely thank you this saved me so much time and possibly money I looked at so many channels turns out I plugged it into the wrong port seriously thank you!
My monitor sometimes works perfectly fine and other times it doesn’t. My pic does have an odd power issue where it only comes on after being plugged in after a while from turning it off because I am unable to turn it on again straight away.
I just change to another HDMI cable & the monitor signal came back. Sometimes it's just a technical other times it's just weird computer gone crazy 🤪 with 50:50 probability.
If your card is set for your previous monitor, then things could go wrong with the new one (a 10 bits color depth could be a no go I think). In my case, the monitor would display the bios, but nothing after that.
This happened to my pc and I managed to fix it somehow and then my pc crashed so I have to turn it of by the switch on the power supply and my pc turns on but I have no signal on my monitor and my keyboard doesn't light up
Oh my gosh you are a life savor I just built a new of everything working greatly. Then when I go to boot up my monitor it said no signal. After 2 days or tears I tried switching my cables and boom just like thAt. Thank you sm
Hey man my pc was working fine with graphic card i changed to bug monitor and didn't get display then i go back to old monitor and now it's also not working and remove gpu then it worked and with gpu i don't get display! Help plz
Thank you Brian. BTW, that display is very dirty. That drives me crazy to see a display with finger prints all over it and greasy streaks. Why not show us how you clean your display?
My bench monitors get dirty sometimes. I clean them, but not as regular as the monitors and equipment that I use all the time. The bench room has an air filter and has to be cleaned almost daily, but dust still occurs from normal air from pulling boxes off shelves with other test equipment, pulling boxes of equipment to replace bad components - it's not a vacuum. I even have covers on exposed equipment - dust still gets in. I'd rather get paid repairing things than making no money because things have a little dust on them. They'll get cleaned eventually.
Unplug all hdmi cables apart from your monitor, and it'll boot up. Not sure why, but I assume it's because having two hdmi outs is confusing the computer. I have a oculus rift so I unplugged it and it worked again. Plug it back in after, then boom.
THANK YOU SOOO MUCH I was ready to buy a new monitor because I plugged the hdmi in the wrong slot . And guys check where you plugging in the hdmi in your cpu don't plug it in the motherboard which is the main backpanel it's very big so you can identitfy it easily but plug it the hdmi socket below the big panel which is your GPU and even if you don't have it there will be some panel there so plug it there for your display to show up 😊😊😊😊
Everything was plugged in and working and I put the hdmi in and the monitor said no video input and then I went onto a different monitor and used a different connection and it didn’t work so then I tried it with the motherboard and it still wouldn’t work
i agree that those are the steps...but I eliminated my PC as the problem quickly. I get a blink on the screen to see windows screen and then dark. Turn off power and back on, get to see screen for microsecond. Tested the monitor power cord/supply and fine. Tested HDMI cord which was fine. Put on another monitor same cords, it worked perfectly. Obvious stuff. But I want to know what's wrong with the monitor...that blink that shows me the screen gives me hope of something easily fixable. So I guess the search goes on to figure out how to get to the "internals" and figure out whether it is just part, or needs a solder or what. I've got the time so why not. You got a video testing such things?
I have the same problem, but it dosent recognize the mouse or keyboard, and when I leave the computer resting for a very long time, it works again like normal
Sr.Poludo hey mate I have the same issue, I left it rest for like 3 weeks then I turned it on for checking if it works and it worked normally till yesterday ... now I have the same problem... I think that’s because of the psu that doesn’t give enough power to ur gpu to work idk.... tell me if u have some good news so I can repair my pc too 😄
I know this might be dumb, but I am dumb so, are you supposed to have a power cable to the monitor or not? I'm not really sure, and I don't want to mess anything up, especially if that's all i have to do😅
Thanks for the upload, It happened to me 2 days ago and I was really upset, since my pc is new. PC powered on, but no signs on monitor, mouse, or keyboard. I opened it, removed my ram/graphics card/battery and put them back on And then it was working I suggest those who run into the same problem to do the same
My Pc specs: Gpu: gtx 1660 super Cpu: ryzen 5 2600x Ram: 16gb ddr4 3200mhz ram Corsair vengeance lpx Motherboard: asrock b450m pro4 Psu: corsair vs650 Moinitor: aoc c24g1 144hz Cable: displayport Plugged into gpu Bought all the parts 2 months ago So what is the problem here? Which part is the reason that my monitor shows no signal?
Check that you have a good cable,and that the lid of the port is removed, the black plastic bit. then make sure you have connected the power supply to the gpu by connecting the pcie cable. Plug the cable in to your gpu not the motherboard. tell me if you have doubts
can someone help me i have this issue and I know its, not the monitor or cable just before I had this issue I uninstalled my graphics drivers and restarted my pc then I was going to turn it back on and install the new driver but then I had this issue how do i fix
hi, I solved the problem if anyone has the same issue, to fix it I removed my graphics card and plugged the HDMI cable into the motherboard then ran the computer and turned it on. the graphics card was the issue so I'm just going to replace hope i could help.
Have you got a fix for CRT monitors with stupid "noise" lines that run horizontally, and make things fuzzy, scrambled, and/or distorted (squished and stretched vertically, and a little "shifted")? The affected area is NOT fixed in one area, as it has moved up and down on the lower region of the monitor (taskbar zone), and the "stretch-n-squish effect varies with how bright or dark the displaying image is. The issue has slowly been creeping up a few years ago (but it was virtually unnoticeable except to my eagle-eyes) and I noticed it gets just a little worse with each power interruption or failure. In recent weeks, the last couple of power failures really made it bad (and noticeable). I had done a thorough disk defrag and that miraculously seemed to set things right again, but over time it started slowly returning. I'm considering trying another power cable, but I doubt that will really fix anything (but who knows? I discovered AC power adapter/switcher things can "die" and need to be replaced when hard drives and scanners begin acting up with poor connectivity issues). Changing monitor settings do not fix anything. I would just get a "new" monitor but CRTs are hard to come by and I still cannot figure out which is better between LCD and LED monitors, and NONE of them are especially cheap.
People here talking about how they mistakenly plugged hdmi to the motherboard and not gpu. I’m sitting here plugging my hdmi to gpu and the screen is black, when I plug it to the motherboard it works but my external gpu doesn’t work and shows up as hidden
I just cleaned my pc and i added 8 gb ram...after that i tryed to start it and i got this problem.I removed the 8gb that i added and all was working again..thank god
Video showing all the steps to troubleshoot No Display OR No Signal on Monitor.
Which media player is best all type video & audio support. Pls reply me
Britec09 could you dm me on instagram or get in touch with me, i need your help. my instagram is daylen.workman
I have a problem big problem my vga hdmi and dvi just died in this fucking second on my HD 5450 its an old card it's OK but ym cpu is r5 3400g I am not using it cuz my pc was on any litgting striked near my house and hdmi died on mobo after that I was using dvi d for vega 11 after 20 days it just froze and died like that's it.. And what the hell is problem my mobo was 3 times in the shop for repair where I bought it but every time they would say its working idk what is problem with
My gpu doesn’t have a cable going to it and I have a ASUS 1650 it’s the single fan one.its supposed to be like that right?
AMD issues lmao never seen anyone with intel have these issues
How am I supposed to check if the ram is bad if I can’t see my screen
Thats what i said
You can buy a ram tester
Or get a white eraser (sounds crazy)and rub it across the gold ram part
@@northerne5082 fr ?
SenpaiDaba yep ,make sure to not leave any easing particles on it and then reinsert it
God bless you sir I was about to throw hands with my pc
I think I am I've been whatchim tutorials from 5pm England time
My pc is so stupid D':
Same
Not me I have two 1990 looking monitors so I’m down bad
LMFAOO
Thank you for preventing world war 3 in my house.
oh yours ended mines about to start when my mom wakes up and sees my pc like this
@@freaxzyyyyt7863 same
Oh mine started last night she just pulled my hair and kicked me😃✋
@@lilayumeko7312 lmao
Your seeing this comment in 2022👀😳
Had it plugged into the wrong hdmi port..
God bless you, I almost threw this computer out the 2nd floor window
Same, lol
So did I.
Dude I was about to open the fucking Grafik card and look into if
was abt to throw it too right on the street
3:00 mine was in the wrong port, solved instantly. Thank you!!
Brando Commando LMAO
Was completely stunned as I had this issue before and all I needed to do was wipe my ram with a cloth. I tried it this time round and nothing happened. After watching this video I tried with a rubber/eraser and it worked. Thanks a million 🙏
The best one I had was the monitor was moving through the menu options and would not stop. The customer had put the computer speakers under the monitor switches on the bottom of the screen. Moved the speakers and it worked. Easy Money. The cables are the first and most of the time the issue. Great video.
Thank you, I knew my monitor and cables were good and I knew I was using the correct port but I could not get any picture. I just moved coast to coast across the country with my PC and feared the worst. After digging around in there following your guide I’ve finally got picture again. Thank you!
What did you do to fix mine keeps saying no signal
I had just gotten a new computer and put in a larger hard drive and more RAM... got it all fixed and was so proud of myself and then this problem came up... ready to SCREAM!!!! Finally realized that the RAM wasnt seated well enough... took them back out and put it back in and heard the snap and BOOM perfection!!!! THANK YOU!!!!!!!
Omg the the ram part with a rubber eraser was legit!
I thought I effed up my pc before watching this video but you reminded me that I took out my ram. So I checked to see if it was down all the way, it wasn’t so thanks and I’m subbing
Easy fix..one min later starts rebuilding a pc .
😂
saved me so much time after my first build! i had the HDMI plugged into the motherboard instead of the GPU and didnt figure it out until after watching your video after tearing it apart and putting it back together 3 times lmaooooo
Bro your comment saved me didn’t hear him mention it in the video but seen your comment ran straight to my Pc and switched HDMI to GPU and it worked 🤣
Same here fella! 🤦♂️🤣 worst 3 days of my life xD
This mate, i was getting so stressed out lol
For me it’s opposite, when I plug hdmi to gpu the screen is black but when I plug it in motherboard it works but gpu is hidden
Thank you. I had my HDMI cord plugged into the wrong spot. This video helped me figure that out after 2 hours of trouble shooting.
Yup! Same with me! This helped so much! Thanks a lot!
Same we are such retards
I'll join the retard group.. about 20 minutes before I found this video.. Thank you very much
I literally did the same thing, tried different HDMI cables, different monitors and I’m like WTF 😂 I watched this video and realized I didn’t have it plugged into my graphics card port but the port further down 🥴
How u plug it in the wrong spot
Thank you so much. I was one of the person who plugged in the HDMI cable in the wrong plug and your video saved me.
Thank you.
It was my CPU, and GPU. They were not plugged in right, and so I took it out and put in back in. Now it works great 👍
Great to hear!
Big ups for keeping me from drop kicking my monitor to the next dimension 👍🏻
Brian of Tech Yes City did the same topic 2 days ago However, you went into more detail than he did. Great video as usual.
Thanks, not caught up on his videos
After I updated windows 10 it just never displayed after the restart.
Sammee
SAAAANE
Me too man
I just changed new VGA 2070 super (Asus prime h310 M-E +i59400f ) work fine with DP TO DP monitor and 2 days after I decided to upgraded motherboard to Asus z490p +i5 10400 PROBLEM NOW DP TO DP MONITOR "NO SIGNAL "
Duangjai Boonsri same but I’m using TUF gaming B450
Thank you so much, i was panicking why my conputer was black and i checked everything but the power adaptor. I was watching tons of tutorials on how i can fix the monitor, but they never mentioned anything about power adaptor. You saved me!
Tried everything just like in the video said . None of it work
And did you fix it?
How to fix it I have new pc but No signal when I use DP TO DP monitor
Lui AMV can you just take it to micro center and they can fix the problem
what do you mean at 3:00 i don’t have a graphics card and have had built in graphics!! Do i plug it in there?
Jake btw i need to know dis too ahaha
yeah i am still confused and have built in had intel graphics lolz
All I did was unplug the computer and plug it back in. Now I get a “no signal” message every time I turn it on.
3-Month Update: I didn’t turn the pc on. I’m an idiot.
same
Same
and i can't find a fix
@@nahhitsnotnys try changing the hdmi to a different port. You can try the graphics card one or the motherboard. I tried and it fixed the problem
@@lostyplayz2799 thanks for the tip but I actually figured it out, so what happened was that when I moved my computer it somehow uninstalled Intel and Intel drivers which didn't allow my VGA monitor cable to connect to my PC properly after installing that it fixed 😔
Brian - please do one of these where an ALL in One machine is being used. I get nothing on the screen at all, all black. The machine does appear to start and it's an HP.
I see what I can do.
Mine toooooo!!!!!
What a brilliant way of explaining this. Thank you. It was simple fix but still needed lot of patience to understand exactly what the problem was. Appreciate it keep posting great videos.
Thanks very much for your assistance. I am 99% sure I tried plugging my display cable into my GPU, and it didn't work. This time I plugged it in, and it brought up a display. Hallelujah! God bless you, sir. For your assistance.
My monitor says “no VGA cable”, but I think everything is already plugged in. How do I fix this?
Plug in a VGA cable probs
get hdmi to vga cable converter
I have absolutely zero clue what to do now. It was working PERFECTLY fine and I went to change my cpu fan, it took minutes. Now everything boots up and I don’t have a fucking display now.
Not sure if this was in it but none of the things worked for me but then I tried unplugging everything in my computer except my main monitor and it worked then I plugged the rest of my stuff once it turned on but when I plugged in my second monitor it said no input again so I just kept my second monitor unplugged until my computer was fully on and it worked fine, I'm guessing since my power/electricity went out that it caused my computer to not give enough power to all my components until it was fully on because I only have this monitor problem when my electricity goes out. So from now on I know what to do
Hey man I just got this 1660 super and I’ve tried everything to stop this flickering in my pc it was fine the first time I put it on and then my screen turned gray and just turned off and everything started flickering I had a 1030 before I just don’t know what to do anymore
You’re the best man. Actually helped me so much!
This is legit man.. I cleaned my Ram and its all working.. Thank you.
What did u clean it wit
@@Cxle. clean it with an air gun u can get in in the hardware for like 80$ with a motor with it
Hahahaha, just helped me fix my issue after an hour of trying. Apparently there are two HDMI ports and was connected to the wrong one. Thank you so much.
Me as well, haha
Witch is right
One is for the gpu one for inetgated graphics on ur pc
One thing that wasn't mentioned was the graphics card driver. I was troubleshooting another problem with mine (certain programs would often crash when I tried to either open a file or save a file). One of the solutions that Dr Google came up with was Update Your Graphics Card Driver, and gave instructions on how to get Windows to do that. Fine. Windows searched for drivers online, and then started installing it. Before it finished, the screen just went black. So I had to troubleshoot that as well. After trying online solutions that didn't work, I gave up and got a professional in to get it going again.
Did the pro say how he fixed it?
@@waterloutwo I don't remember exactly (he did it at my place while I was watching). What I think he did, he managed to boot it into safe mode or diagnostic mode, one or the other, found out what the video card was, downloaded a driver for it and installed it. I think that was the gist of it. At the end of the day, I was wise to get someone who knew more about it than I did to try and solve the problem. It worked.
how does one update drivers without a working display?
@@dirtbeard108 One doesn't. One gets a professional to do it, like I did.
Bro monitors aren’t cheap I can’t just get a new one
Even worse.THE MOTHERBOARD!!!
ILYSM I COULDN'T HAVE FINISHED MY BUILD WITHOUT YOU
Thank you!!!! My graphics card had covers for the hdmi slots and I never saw them until this video
Thank you so much! I didn't know why my screen wasn't working. I had it plugged into the wrong port. I switched it and it came right on. Thank you!
Huge thanks Man, that was so helpful!!
You're welcome
Mine is not working
Jordan Erasmus no need to hate
Oh sorry bro didn't know it was that bad
after hours of research i came here and it worked subbed and liked!
I cant thank you enough for this video. This is my first time building a pc and I just cant get it to connect to the monitor. I thought it was something with my dvi to vga adapter but I watched this vid and tried to clean my ram using eraser and it works! Thank you once again. I was so scared I did something wrong when i was building this
this works for me!
So i actually cleaned the dust inside my computer and now the signal doesn't work. I don't know if it's a bad analog connection or have I potentially stuffed something while cleaning it?
I'm having the same problem too,
Thank you. I moved my computer and the cord came unplugged, I plugged it back in the wrong USB port so I figured out my problem at 3:00!!
What usb slot did you connect it to?
The one obvious issue not mentioned is if you just updated your video driver with a buggy one. This happened to me tonight. System ran fine until I rebooted, then the no power messaged started floating across the black display. To fix this you need to boot up in safe mode and uninstall the buggy drive or go back to the last good restore point on the pc. You can look online how to reboot in safe mode. In Windows 10 you need to turn off and restart your pc three or more times before the restore screen pops up. You then need to go to the Troubleshoot option.
WHAT I DID TO FIX: take out mobo battery for 15+ seconds and put it back in. Worked first try after trying everything else.
still didn't work help meeeee
Zeref sorry idk it worked for me :/
That’s the power supply right?
Niccc well I took out the battery, the silver circle below the gpu
is that the little silver coin on the mobo?
I just had my rig updated and it's been so long that I've never had an HDMI port in the actual graphics card before. I kept plugging the HDMI monitor cable in the onboard HDMI port and tried three different monitors, two power cables, and two HDMI cables before running to RUclips for help! Thank you for mentioning the two different ports because I'm not sure how long that would have taken me to figure out lol.
Life saver! My HDMI cord was plugged into the wrong spot. That's what I thought, but I needed to shine a flashlight on the back of my PC to see that. 😅
Mine was the CMOS battery. You're a legend. Thanks for saving me money and time.
Omg thank you so much, I just had my hdmi plugged into the wrong one
I honestly just click through videos until I find the solution. Thanks for helping solve todays problem.
I was plugging my hdmi in the CPU without a graphics card, I'm so dumb, thank you for explaining this.
Saw this comment before the addever even ended and just sighed with disappoint in myself lol
For me, it was the CMOS. Changed the battery and cleared the data. Worked like a charm. Thank you!!!
It's a very common problem. Glad you got it sorted out. Thanks for watching and don't forget hit the subscribe button for more videos
Thank you, I'm new to all these and this video worked for me. Great explanation
With me it was the CPU. I found out about this after two days of research on the web and by watching countless problem solving youtube videos. You always hope it's something small like a misconnected cable or something, it was a more expensive joke. Thank you for making this video.
Does anyone know why it isn’t working? I cleaned my ram, I already tried putting hdmi on both plugs.
ExzSplash same issue
indigivent I got it fixed! Make sure to restart the CMOS
I just got another stick of ram and I put it in and there’s no signal
clouted nozu you have to restart your CMOS look it up on YT
@@exzsplash8273 whats CMOS ?
So, I'm trying to set my laptop (Asus ROG Zephyrus GX501) up with two other monitors. As long as I just plug in one of them, everything works fine. Once I plug in the third, it doesn't show any signal, though the laptop does detect another plugged in monitor. The monitor also shows that it's connected to a PC, it just doesn't put anything out. Tried different setups - HDMI (monitor) to USB-C (Laptop) HDMI (Monitor) to Adapter to USB 3 (Laptop). Since I want to expand my screen (not duplicate), a splitter won't do any good. The first additional monitor works just fine, no matter which port it is plugged in, the second, however won't. I can use mentioned "second" additional monitor as the only additional just as well, then it works fine. So it's not defective.
BIG THANKS😀 it was the wrong port 🤩👍🏻✨
same thing
I want to sincerely thank you this saved me so much time and possibly money I looked at so many channels turns out I plugged it into the wrong port seriously thank you!
You're welcome
Thank you so much, i realized i had it plugged the display cable into the motherboard instead of the GPU
Same
NRO i just my pc and your comment made me realise this holyshit tysm
Thank you for this comment! It worked 😄
My monitor sometimes works perfectly fine and other times it doesn’t. My pic does have an odd power issue where it only comes on after being plugged in after a while from turning it off because I am unable to turn it on again straight away.
Same problem only this time it wont come back on
I just change to another HDMI cable & the monitor signal came back. Sometimes it's just a technical other times it's just weird computer gone crazy 🤪 with 50:50 probability.
Ik it's off topic and random but you can do 50/50 instead of 50:50
Lucky
If your card is set for your previous monitor, then things could go wrong with the new one (a 10 bits color depth could be a no go I think). In my case, the monitor would display the bios, but nothing after that.
How did you fix that
You make things so easy thank you! I kind of feel stupid with what I had trouble with since you fixed it asap!
What was it??
Out of 100 videos this man helped 100% thank you so much amazing
This happened to my pc and I managed to fix it somehow and then my pc crashed so I have to turn it of by the switch on the power supply and my pc turns on but I have no signal on my monitor and my keyboard doesn't light up
same
same
Same
i got solution after i try many times.. 1- just remove dust at ram, 2- if not display yet try to open the disk part then close back..
@@memir384 what disk part???
Oh my gosh you are a life savor I just built a new of everything working greatly. Then when I go to boot up my monitor it said no signal. After 2 days or tears I tried switching my cables and boom just like thAt. Thank you sm
I'm confused mine works just fine but sometimes when I turn it on my monitor gets no signal any solutions?
same here
Did u fix it?
Did everything in the video and one of them worked! I dont know which but thanks man!! I was panicking
Hey man my pc was working fine with graphic card i changed to bug monitor and didn't get display then i go back to old monitor and now it's also not working and remove gpu then it worked and with gpu i don't get display! Help plz
Any updates?
This is a big help for me. I plug in my hdmi to my mobo not in my gpu and finally i saw this video and my monitor now have signal. 👍
Thank you Brian. BTW, that display is very dirty. That drives me crazy to see a display with finger prints all over it and greasy streaks. Why not show us how you clean your display?
Mmm good idea
Just a test monitor, but yeah sounds good.
My bench monitors get dirty sometimes. I clean them, but not as regular as the monitors and equipment that I use all the time. The bench room has an air filter and has to be cleaned almost daily, but dust still occurs from normal air from pulling boxes off shelves with other test equipment, pulling boxes of equipment to replace bad components - it's not a vacuum. I even have covers on exposed equipment - dust still gets in. I'd rather get paid repairing things than making no money because things have a little dust on them. They'll get cleaned eventually.
what is the blue cable plugged into the pc?
I hope you see this but...Thank you so much it was the hdmi being plugged into the CPU not the my graphics card❤
i love you
Unplug all hdmi cables apart from your monitor, and it'll boot up. Not sure why, but I assume it's because having two hdmi outs is confusing the computer. I have a oculus rift so I unplugged it and it worked again. Plug it back in after, then boom.
Rituals useful information briefly clear ideas steps you rock Brian God bless you. My best regard 😍😍😚
You're welcome
THANK YOU SOOO MUCH I was ready to buy a new monitor because I plugged the hdmi in the wrong slot . And guys check where you plugging in the hdmi in your cpu don't plug it in the motherboard which is the main backpanel it's very big so you can identitfy it easily but plug it the hdmi socket below the big panel which is your GPU and even if you don't have it there will be some panel there so plug it there for your display to show up 😊😊😊😊
I don't know who you are, but I love you.
Thank you
Everything was plugged in and working and I put the hdmi in and the monitor said no video input and then I went onto a different monitor and used a different connection and it didn’t work so then I tried it with the motherboard and it still wouldn’t work
Dude, great video! Thank you so much! I feel so dumb now but this helped me so much. Thank you :)
i agree that those are the steps...but I eliminated my PC as the problem quickly. I get a blink on the screen to see windows screen and then dark. Turn off power and back on, get to see screen for microsecond. Tested the monitor power cord/supply and fine. Tested HDMI cord which was fine. Put on another monitor same cords, it worked perfectly. Obvious stuff. But I want to know what's wrong with the monitor...that blink that shows me the screen gives me hope of something easily fixable. So I guess the search goes on to figure out how to get to the "internals" and figure out whether it is just part, or needs a solder or what. I've got the time so why not. You got a video testing such things?
7:23 thanks it fixed mine.
Which media player is best for all video & audio supported. Pls reply me. Thank u.
I click the power button, my monitor turns on and says no signal, then my computer starts screeching.
Screeching is an automatic sign of ⚠️BAD⚠️
I have the same problem, but it dosent recognize the mouse or keyboard, and when I leave the computer resting for a very long time, it works again like normal
But I need help :(
Sr.Poludo hey mate I have the same issue, I left it rest for like 3 weeks then I turned it on for checking if it works and it worked normally till yesterday ... now I have the same problem... I think that’s because of the psu that doesn’t give enough power to ur gpu to work idk.... tell me if u have some good news so I can repair my pc too 😄
Found out it was my ram :')
I know this might be dumb, but I am dumb so, are you supposed to have a power cable to the monitor or not? I'm not really sure, and I don't want to mess anything up, especially if that's all i have to do😅
Thanks for the upload, It happened to me 2 days ago and I was really upset, since my pc is new.
PC powered on, but no signs on monitor, mouse, or keyboard.
I opened it, removed my ram/graphics card/battery and put them back on
And then it was working
I suggest those who run into the same problem to do the same
Thanks for letting us know
My Pc specs:
Gpu: gtx 1660 super
Cpu: ryzen 5 2600x
Ram: 16gb ddr4 3200mhz ram
Corsair vengeance lpx
Motherboard: asrock b450m pro4
Psu: corsair vs650
Moinitor: aoc c24g1 144hz
Cable: displayport
Plugged into gpu
Bought all the parts 2 months ago
So what is the problem here? Which part is the reason that my monitor shows no signal?
Check that you have a good cable,and that the lid of the port is removed, the black plastic bit. then make sure you have connected the power supply to the gpu by connecting the pcie cable. Plug the cable in to your gpu not the motherboard. tell me if you have doubts
fireshuriken_97 won’t work for me
A great video! Thank you for sharing! I really enjoyed it!
Thank you so much! I was plugin it in the wrong port🤣. I'm so glad you suggested that thank you!
can someone help me i have this issue and I know its, not the monitor or cable just before I had this issue I uninstalled my graphics drivers and restarted my pc then I was going to turn it back on and install the new driver but then I had this issue how do i fix
Plug to the vgi cable and run the cpu
Samee I was going to replace my gpu and now can’t use the gpu but I can use the onboard mobo graphics card. Please tell me if you have solutions
same if anyone knows how to fix plz respond
@@spanickar33 I have tried using a DVI cable by run CPU do you just mean to turn it on normally?
hi, I solved the problem if anyone has the same issue, to fix it I removed my graphics card and plugged the HDMI cable into the motherboard then ran the computer and turned it on. the graphics card was the issue so I'm just going to replace hope i could help.
A thousand million Thanks u saved me alot of unnecessary Headaches
I don’t have windows activated could that be the problem? I went tried 2 DP cables and I still get no signal
Did you figure that out ? Was that the problem? I need to know
Have you got any advice for installing a new graphics card, and the pc booting up, gets to "starting windows" and then it says "no video signal"
I just cleaning my pc then when i turn on its goes no signal help
HELP I CAN'T TAKE IT ANYMORE
Me too bro
I built it for first time
No signal
Have you got a fix for CRT monitors with stupid "noise" lines that run horizontally, and make things fuzzy, scrambled, and/or distorted (squished and stretched vertically, and a little "shifted")?
The affected area is NOT fixed in one area, as it has moved up and down on the lower region of the monitor (taskbar zone), and the "stretch-n-squish effect varies with how bright or dark the displaying image is.
The issue has slowly been creeping up a few years ago (but it was virtually unnoticeable except to my eagle-eyes) and I noticed it gets just a little worse with each power interruption or failure. In recent weeks, the last couple of power failures really made it bad (and noticeable).
I had done a thorough disk defrag and that miraculously seemed to set things right again, but over time it started slowly returning.
I'm considering trying another power cable, but I doubt that will really fix anything (but who knows? I discovered AC power adapter/switcher things can "die" and need to be replaced when hard drives and scanners begin acting up with poor connectivity issues).
Changing monitor settings do not fix anything.
I would just get a "new" monitor but CRTs are hard to come by and I still cannot figure out which is better between LCD and LED monitors, and NONE of them are especially cheap.
Thank you so much, I've been at it for almost an hour and you helped a lot.
My pc broke for a 10 months now and still not tixed
@@Cameronfernandessame smh
Bro mine is some shitty dell pc the thing just prob doesn’t work bc it’s like 2 years old
Ty man, after many hours of stress and trying out solutions i stumbled upon your video and in 3 minutes i found a solution that worked for me
Yo i need help what worked for you
Hey man, my monitor was working fine until i unplugged it and plugged a ps4, no IT says that there is no signal.
Please help me
People here talking about how they mistakenly plugged hdmi to the motherboard and not gpu. I’m sitting here plugging my hdmi to gpu and the screen is black, when I plug it to the motherboard it works but my external gpu doesn’t work and shows up as hidden
I just cleaned my pc and i added 8 gb ram...after that i tryed to start it and i got this problem.I removed the 8gb that i added and all was working again..thank god
You didn’t put the ram in all the way