015 Pagbuhos ng slab on-fill | concrete pouring using ready mixed concrete.

[@JerichoBaylon]

Ayos to kuya mas mabilis to ma monetize change content nadin ako e

[@JerichoBaylon]

May ads na pala to kuya lupeeet

[@onsitebuildph2761]

@@JerichoBaylon yes bro hehehe. saglit nga lang nameet ko na yung reqs. may vids kase ako na marami views kaya ayun sa awa ng Diyos monetized na heheh... kaw rin galingan mo bro.

[@onsitebuildph2761]

atleast sabay na rin sa work ko to'ng pagvivideo hehe

[@papabhongtv8851]

sir, ano po ang kapal ng floor sa GF

[@chezkamae4684]

1,2,3, din po b ang mix ng cement grava and buhangin thank u po

[@onsitebuildph2761]

That will depend on the structural component.. but for this, its ready mixed, so the PSI is the basis.

[@bubugg4210]

question po. no need na po bang e isolate yung columnns pag nag bubuhos na?

[@imnotrobot007]

Sir ano kaya solusyon sa yumayanig na concrete slab. Pwede kaya magdagdag ako ng concrete topping para hindi nayanig ang slab. 4 inch thick lang po. At naka steeldeck. Salamat po

[@MadaraUchiha-vv6qf]

Tibay boss ng mga tao nyo yung iba wla mga bota taz ang halo ready mix..😅😅

[@The-Master-of-None]

Ilang araw po bago palitadahan ang poste at beam? Pagkatuyo po ba o pede na sya palitadahan after alisin ng formworks? Salamat sir.

[@KingKuneho85]

Sir kailangan p b maglagay ng construction joint kung mejo malapad ang flooring?

[@onsitebuildph2761]

Depende sa lapad. Is residential, not requires. For warehouse, it requires.

[@clintgulferic1181]

arkitek nasan ang expansion joint mo sa slab? prone sa crack ang flooring mo sabunin ka ng owner nyan..he he

[@onsitebuildph2761]

Thank you for the concern sir. For smaller areas, it doesn’t require expansion joint po. But for larger areas of slab, It requires. Its the standard thing😁

[@jualyal2622]

Hindi nyo na nilagyan ng expansion joint iyong concrete slab?

[@onsitebuildph2761]

For smaller areas of slab. Not necessary. For larger/ wider areas of slab. It requires.

[@kurarisu2560]

ano po thickness ng slab, i may have missed it

[@onsitebuildph2761]

For this project, 5" or 125mm thickness as per requirement of the structural engr. Pero minimum is 4" or 100mm.

[@felixlujan4809]

A very bad mixture, too wet, not enough cement. You can the rebar across the floor.

[@onsitebuildph2761]

To wet for slab on fill is manageable. But to wet for columns and beam area not. This segregates the aggregates.