How to Change the Oil in a Lamborghini Huracan LP610-4
HTML-код
- Опубликовано: 28 янв 2023
- In this video let's go over how to change the oil in a Lamborghini Huracan LP610-4. It's certainly not as simple as most cars as you have to remove 2 underbody panels which are held up by about 38 bolts. You also have 8 drain plugs so it does take a while to change the oil.
We used 0w30 Liquid Moly oil.
This car is for sale through our dealership, NG Supercars www.ngsupercars.com
Check out my website for parts, services, and merch! www.normalguysupercar.com
Use the code ngs10 and save 10% off most items!
Email us sales@normalguysupercar.com for custom quotes.
Visit our dealership NG Supercars: ngsupercars.com
Join this channel to get access to perks:
/ @normalguysupercar
Memberships: bit.ly/ngsmember
Facebook: normalguysupercar
Instagram: / normalguysupercar
Twitter: / normalguysuperc
#oilchange #lamborghini #diy 
Авто/Мото
This car gives the term "possible oil leak" a whole new meaning.
No shit! Geeze
Sweet !!! What an awesome car !!! Sure it may take a while but what an exciting reward to be able to say "I'm not hanging out today, I'm changing the oil on my Lambo"...lol
You got that right!
Had to laugh when you tried removing the filter element from the housing!😂. It’s not like a 458, is it!!! There’s a trick to it. Put the housing upside in a vise. Use a flat head screw driver to pry the element to one side….to get it to release from one of the clips. Then work your way around, one more at a time!
Geeze yeah that was stupid tight
Glad you bought the Form A Funnel, they have saved me many times!
Yeah that's badass! Super pleased with it
What a brilliant tool. Every time I see them draining oil onto a support brace or cross-member I've been thinking "surely there's a better way". And now we all know.
Done this job many times!! The plug way up high, use a tall Starbucks cup. There’s another one where you need a low-profile plastic tray. Of all eight, there are 4 different sizes of crush washers, all aluminum.
Yeah if they're gonna have so many plugs they could at least make them consistent
Wonder if someone has figured to engineer a oil pan for these to just a single bolt for oil 😂 crazy to have 8 drain plugs
@@jp_interest4333 I don’t believe that would be possible due to the design of the dry sump system
@@kyleanderson2807 it’s possible if you connect all the areas as one pan covering each hole, wouldn’t be pretty but it would work if they design it right, just be a really fat oil pan lmfao
That color is insane! ❤️
I love the color
An old school just Dan video- Nice! Great job!
Glad you enjoyed it!
Awesome DIY! Thx Dan
Glad you liked it!
If one plans to do this on a yearly basis, may I suggest that you use large colored magic markers to mark and number the bolts on the drain plugs. It wouldn't hurt to also have a list, 1through 8, stating what size or type of tool is needed for each drain plug. As you drain the different locations, you can draw a line through that number on your list. I did this two years ago, however, I'll never do it again. Last year it cost me $900.00, I'm sure this May it is going to be $1000.00. If one is thinking about buying a Huracan, you are going to be paying $1000.00 a year for oil changes. Let me also add that, it's worth it.
Yeah it's a pretty significant effort for an oil change
annual oil changes are for broke people
or lazy people.
if you care about any car, whether honda or a ferrari,
you dont do maintenance to bare minimum factory requirenents
When you’re working on a tough nut or bolt it’s always easier/stronger to pull toward you than to push away from you if you have the choice.
Yeah
But when you push away, you're less likely to bust your knuckles trying when it breaks loose. 20+ years of DIY mechanic with more busted knuckles than I have fingers.
@@DavidEdwards9801 how are you less likely to bust your knuckles pushing away from you than pulling toward you? That doesn’t even make sense. You can’t bust your knuckles pulling toward you. Maybe this is why you’ve busted your knuckles so many times over the years.
@@craigcampbell1843 You push away with an open palm.
@@DavidEdwards9801 ah
This video helped and also nice huracan love the color
Thanks
@@normalguysupercarand also are you going to do a tutorial for a STO oil change ???
Very cool color 😎
I love it
Your are working is so good 💯❤
Thank you 🙌
Well now I certainly feel better about paying $450 for my mechanic to do this....holy cow great job.
Yeah, that's pretty cheap for the amount of work and materials.
Thanks for this video. Now I know why it costs so much for an oil change. Huracan is my favorite car, but can't afford the upkeep.😱
Yeah, it's a lot of work for what should be simple. :)
You need to see the Brazilian exhaust system named Secret Weapon, for super cars like this beauty. Not to expensive and precisely made.
Ok I'll check it out
Nice video, the OCD in me was like clean that oil off the metal shield lol FYI the huracan takes 8-8.5 liters of oil. I hope you didn't really add 13. If you did drain immediately.
I've changed on my 2 huracans - one turbocharged and one stock. Both take less than 9 quarts. 13 liters is too much.
I made some wood spacers out of 3/4" boards for my lift feet.
Oh, that's a good idea.
I'm sure it's been said already, but putting the filter cartridge in the engine first and then screwing the cap on is your safest option. I've seen a few blown up landrovers that use a similar cartridge and in short the plastic nipple needs to sit correctly in the drain hole in the filter housing, if not it usually gets snapped off or pushed up into the filter cartridge and then it's bye bye engine.
Ah yes
Very Nice
Thanks
2:34 every Italian laughing
Right?
I would imagine that the torque specs are designed to allow for heat expansion. Cool 😎 color!
Could be but it still needs to be enough to crush the crush washer and form a seal.
no. they are for gorillas that like to overtighten things.
that's a lot of fasteners! Tires need some love too
Yup they are done
Beautiful colour, pain in the arse to do an oil change, Rj in Oz
Yup
Hello, I'm a Korean who enjoyed watching the video. I'm trying to diy the huracan evo oil change. Is the torque value of the filter cap and draw plugs the same as in the video?
I don't know, you'll need to look that up
Was the option of using an oil sucker pump and drain via the dipstick an idea?
You won't get it all out
At least it still has a dipstick! E92 M3's you have to run for 10 mins then it will tell you what the level is 😂
Ah yes. Electronic oil measurement is annoying as fuck
Tysm, took me 2 hours to get this done 😅😅😅
No problem 😊
If you don’t mind me asking what do you do to afford such a car
good morning, can you tell me what is the tightening torque of the bolts to drain the used engine oil? FERRARI 488
I don't recall
As a lambo tech for future huracans it’s better to place the actual filter in the engine first so that way if it goes on wrong you won’t have to struggle to take it off..also if you look over on the drivers side where the filter goes, there’s a hole and you just match up that little nipple with the o ring on it and push it in, then screw the filter housing on…also torque specs for the two little 5 allan screws is 10NM, the big one is 45NM, the T30 is 12NM, the oil cooler plug is 23NM, the two M8’s for the lines are 30NM, and the 13MM in the front is 30NM aswell…on the dip stick put the oil between the words Do Not and usually start with 9.3 Quarts then add after you see the temperature at 90…P.S. always make sure you tighten the oil filter because it’s not fun to clean lol
Thanks for the tips!
A urus is something else also 😅 but after working on a few Bentleys it’s walk in the park 😂
Oh man
What do you do with the old oil?
I will recycle it eventually when I take it to the parts store
After changing the oil DIY probably made you say, “You can take my Lambo…” and really mean it, heh.
LOL!
O-ring should be lubricated with oil before assembly
Yes
Wonder if the R8 has 2783 bolts under it aswell.......
Probably
I fought with my oil filter on my R8 like that. Same dam one! LOL
Lol yup
What was the total oil capacity? Also how much did that lift cost you?
About 13L. $3500
@@normalguysupercar Thanks for your reply, I appreciate it.🙂
I think 10 Nm is not enough torque to crush the crush washer. I don’t go by torque, I feel the effect of the crush washer deforming and know when to stop. If it’s an o-ring type drain plug it doesn’t need as much torque
Yeah that seems like not enough to me as well
One of the reasons I let the dealership do it 😂
Yeah no kidding lol
That took forever! Next time I'll just go to Jiffy Lube.
Lol yup
Lamborghini's way of discouraging the weekend warriors. Good lord!
Seriously!
Which car is better when it comes to reliability ( Lambo or Ferrari)??
Eh. I'm not sure
Bro didn’t lube any of the gaskets on the new filter 😂💀
Cool
Never use a crescent wrench for the oil filter. Go buy a 32mm especially if your going to be doing OC’s on Lamborghinis
I have it now
How do you know which bolts are for the oil. I’d be totally confused!
It's tricky
I'm surprised the oil dipstick/fill is under that cover and not accessible without unbolting the cover. Weird.
Yeah that's kinda annoying
@@normalguysupercar Here's an idea, have a hole neatly machined in the cover so you can access the dipstick/fill without removing the cover. At least you could check the oil level that way.
5:32 😂😂😂🎉 surprise
Yup
that's a lot of draining Dan. Tires worn out ?
Yup they are
Liquid Gold 8:45 🎉😂😂
Lol
what does Lambo charge for that service? what does that filter cost ?
I don't know what Lamborghini charges. The filter was about $50
@@normalguysupercar thanx.. PJ = Exotic Car Hacks, took a Lambo to the dealer for a service = oil change, check wheel torque and the cars filters. $1300, and he said that was cheap, lol.
@@normalguysupercar ruclips.net/video/9LIUm1YYUtM/видео.html
Me like Lamborghini. Not boring, you can domire mods. Great sounds especially the v12 ones. But way to many bolt& screws. Can not emanate doing it myself.
Yup
I'm guess the Audi R8 would be about the same
V10 models
Incredible, he didn't put any oil on the O ring.
Just because you didn't see it on the video doesn't mean it didn't happen
PS Why did you get rid of Ron Jeremy he was top!
Business decision.
Holy cow. That’s an oil change. And the rear tires are smoked (I imagine you already know that.)
Yeah we're aware of the tires
@@normalguysupercar slicks must work well in Texas, surely?
if your watching this u made it
Hooray
Just saw this car on my local marketplace😂
Yup
luckily...all adjustable end wrenches are perfesionally calibrated to 25 newton meters right from the factory...🤣😂
Yes.
Where’s Ron Jeremy
No longer with the company
“You drive the Lamborghini, you no work on the Lamborghini”☝️ - Quote from the executives from Lamborghini
Lol
Those panels are there so you can't tell if you didn't torque one of those right.
Ok
13 litres of oil, I don't know why (Iam no kind of automotive mechanic) I would have guessed the oil filter would have been bigger.
Yeah
BMW and Audi don't hav a dip stick and this car does and this cost more that those other brands
That's cause dipsticks are more reliable
Meanwhile my Acura had on drain plug lol
Lol yup
Who you rooting for on NFL championship Sunday?
Uhhhh... It's already Superbowl Sunday? Huh, well I don't actually know who's playing cause I don't watch the NFL. Lol
@@normalguysupercar good man.
That style of oil filter housing sucks. The one on our Jeep Cherokee just cracked at 70,000 miles. We lost 5 quarts of oil before the check engine light came on. The repair cost us $1,000--the part itself was $350. There's a replacement one made out of metal instead of that cheap plastic. I would never ever buy another vehicle with that type of oil filter housing. By the way, a mechanic on YT said that is costs $17,000 to change the oil on a Bugatti!
Yikes
Is easier to change the oil in a Rolls Royce Trent XWB-94K of an Airbus A350X. And I'm not even joking 😃
Lol that's good to know
4:05 watch your language sir,
my 38 year old son still lives at home with me and might have heard this
Haha
So I take it you can't vacuum all the oil out? 😂
Nope
Absolutely ridiculous! And this is exactly why I have a C8 Z06 coming this summer. Lamborghini headaches, no thank you. Btw that car looks so old and outdated underneath… I’m hoping they get with the times with the new 2024-2025 Huracan replacement… All Huracans are basically running around with 2014 technology
That's true on the tech but they are still pretty damn fun
me watching like a have a lambo
It's all good, it's the ones that are pretending to want one that are the problem.
They want to keep it interesting and make sure you have all the tools? More like making it so complicated you take a good look and say hell nah. I ain’t doing it.
True
Anxiety trigger
Sorry
Holy, imagine paying good money for this oil change and the mechanic doesn't even have the right tools for the job. Rough
I'm not a mechanic
This guys tools suck. Incredible. I should be doing oil changes on lambos. Anybody can do it
That's the point, it's not hard.
I bet this Pink Lambo is for a Lady...
It's purple but why not
That's just asinine. There is no way I'd tolerate such an obnoxious oil change procedure. It's clearly done this specifically to be as much of a pain in the ass as possible and I have no patience, nevermind respect for that.
Lol it is pretty annoying
the amount of us watching this w no lambo
Eh it's all good. I watch shows about all sorts of stuff I don't have or ever will.
This definitely ain’t no lube shop 5 min bs oil change 😆.
Those guys would cry anyway if they were even be worthy in touching a car like this.
Lol
Flex Funnel Is Amazing 🤩 🎉🧰🛠️
Yes it is