Excuse my ignorance, but how do you do if, let's say, you want to play a song with a clean preset and then in the middle of the song (in the chorus or for a solo) you want to add distortion? How do you set that up?
What impressed me about the mooer ge100 was the 180 second loop, very useful especially when you would like to record a full song but don't have someone else to play with you, it would be of huge help. Cool playing bro! Keep it up!
I recently bought mooer ge100. I also have a blackstar 20 amplifier which has many setting and presets. Now i don't know, should i connect mooer ge100 to amplifier or directly to a speaker. Different effects on ge100 and Different on blackstar. I think it will add both effects and will distort sound. How to connect it to amp blackstar v3 20
The Mooer has to go through your amp. So you’ll want to you the amp’s clean channel. Or use the amp’s distortion and only modulation effects with the Mooer
Great demo ty .... just got one in today ill mess round tommrow. I don't know why but Bill Murry pops into my head with you lol funny guy MOOOOOO COW.....
@@knightrobot Thanks for the reply. If it is any help, every RUclips video about the Mooer GE100 shows a continuously blinking/flashing Tap Tempo Function button. This is quite odd, and the user manual doesn't mention anything about the flashing either. Someone else that I had asked, told me to press the Save button twice and the blinking will stop. That didn't work on my device and he said probably my device is faulty because clicking the Save button twice on his device works for him. Could you try that on yours and see if it works? Do let me know. Really appreciate that, thanks.
Help. I just bought this effect. And i notice that all.the pedal volume is not similar even though.when i press the distortion pedal.it so.loud. but if i press some normal effects is so low i dont know why
Sir, i need your help, i have problem with pedal volume, if i push until max and then led indicator light on, but if turn back to down and back to max, its must be stuck on mod(pedal volume no function) until the same move, it can back again, i already to factory reset but cannot fix that problem, anyone can help me pls? Thanks.
Hello, I’d love to try and help you out. Make sure you haven’t accidentally switched it to a wah function. Can you upload a video displaying the problem?
Unfortunately, the only way is to cycle through the other patches. What I do is save a patch I like in a new location next to what I want to switch from.
@@knightrobot thank you so much for the reply! I'm shopping around individual pedals (distortion, delay, volume pedal, etc) but this one looks pretty cool. Is distortion powerful enough for thrash metals, like Metallica, etc?
@@knightrobot Hello again! I finally bought it and received last night. One quick question. Why does each patch has different volume? I mean some patches have really lower volume so I increase my amp's volume, then the other patches have much higher volume so i turn down the amp volume again. There are some Metallica songs that you need to switch between clean and distortion tones. When I had single distortion (Metal Zone), it was easy as I just needed to even volume between clean and distortion. Is it defect or do I need to understand something else?
I’d say for the price, it’s hard to find a device that offers a better variety of quality effects. Super realistic tones and amazing versatility. Cons: no usb connectivity. No way to upload/download shared patches. Noticeable latency when switching between patches. Overall. I’m very happy with the product.
It depends on which effect you want. It’s first effect is for: wah/flanger/phaser/tremelo. Choose one of those. The second is distortion. The third is modulation, that includes chorus/flanger et cetera. Followed by delay. Then reverb.
Sorry about the delay in getting this made. This gives a decent example of the latency you’ll encounter during patch switching. Mooer GE 100 Patch Latency Test ruclips.net/video/3erTtRZW67E/видео.html
I bought one few months ago and I realised that any guitar effect processor that doesn't have a USB to import patches in it is usless! Mooer GE100 is one of them. My advice don't buy it, People.
Whoever gave the thumbs down to this video is a chump and I’ll promise to insult them to their face if given the opportunity. I’m an eight foot tall world renowned blackbelt (of guitar, and physical combat in that order). I own 4 wolves, all tamed by me in the wilds of Siberia. I’m intense. And intensely pissed. I’m assuming “Thumbs Down Gary” over here is upset because he doesn’t rip the doors down with this violently sick Mooer setup, so he has no choice but to be a GARY DOWNER and not enjoy the sweet sound of the MOOS resonating from the hottest Chinese shred-box on the planet played by a shred master. What a clownzo. I’ll fight you on stilts, Gary Buttchug.
From the first joke told I knew I needed to subscribe. Nice job !
Haha! Thanks!
Excuse my ignorance, but how do you do if, let's say, you want to play a song with a clean preset and then in the middle of the song (in the chorus or for a solo) you want to add distortion? How do you set that up?
What impressed me about the mooer ge100 was the 180 second loop, very useful especially when you would like to record a full song but don't have someone else to play with you, it would be of huge help. Cool playing bro! Keep it up!
Thanks so much
I recently bought mooer ge100. I also have a blackstar 20 amplifier which has many setting and presets. Now i don't know, should i connect mooer ge100 to amplifier or directly to a speaker. Different effects on ge100 and Different on blackstar. I think it will add both effects and will distort sound. How to connect it to amp blackstar v3 20
The Mooer has to go through your amp. So you’ll want to you the amp’s clean channel. Or use the amp’s distortion and only modulation effects with the Mooer
I came here to make sure I wasn't the only one who's box was open when I got it "new".
Great demo ty .... just got one in today ill mess round tommrow. I don't know why but Bill Murry pops into my head with you lol funny guy MOOOOOO COW.....
That is an amazing compliment! Enjoy the Mooer
Sick lick licks there love em
Hey thank you!
Try it into your effects return, sounds better that way.
@Lou Aguado Is the effects return located on the Amp?
Hi, the Tap button on my Mooer GE100 is always blinking. Is it possible to stop it from blinking all the time? Grateful for any advice. Thanks.
I’ll be honest. I have no idea if there’s a way to turn that off. Sorry
@@knightrobot Thanks for the reply. If it is any help, every RUclips video about the Mooer GE100 shows a continuously blinking/flashing Tap Tempo Function button. This is quite odd, and the user manual doesn't mention anything about the flashing either.
Someone else that I had asked, told me to press the Save button twice and the blinking will stop. That didn't work on my device and he said probably my device is faulty because clicking the Save button twice on his device works for him.
Could you try that on yours and see if it works? Do let me know. Really appreciate that, thanks.
Is that an expression pedal, wah, swell?? I'm not talking about the main one but the foot Pedal on the right
Depending on which effects you have in any specific patch, it’s a wah or a volume pedal.
Help. I just bought this effect. And i notice that all.the pedal volume is not similar even though.when i press the distortion pedal.it so.loud. but if i press some normal effects is so low i dont know why
You might want to go to each Patches amp setting and check what the volume is set to. That might help.
Sir, i need your help, i have problem with pedal volume, if i push until max and then led indicator light on, but if turn back to down and back to max, its must be stuck on mod(pedal volume no function) until the same move, it can back again, i already to factory reset but cannot fix that problem, anyone can help me pls? Thanks.
Hello, I’d love to try and help you out. Make sure you haven’t accidentally switched it to a wah function. Can you upload a video displaying the problem?
Recalibrate pedal settings. Push hard on pedal botton.
@@knightrobot can you compare which is better between MOOER ge100 and Nux mg100
@@knightrobot can you compare which is better between MOOER ge100 and Nux mg100
@@dagoldigol I’ll have to get one first. But I’ll see what I can do! Thanks for the suggestion.
hi, how can you jump, for example, from 01 to 07 with foot switch?
Unfortunately, the only way is to cycle through the other patches.
What I do is save a patch I like in a new location next to what I want to switch from.
@@knightrobot thank you so much for the reply! I'm shopping around individual pedals (distortion, delay, volume pedal, etc) but this one looks pretty cool. Is distortion powerful enough for thrash metals, like Metallica, etc?
@oneputtpar3192 Absolutely. The thrashability of this pedal is one of its best features!
@@knightrobot thank you so much! Have a good days!
@@knightrobot Hello again! I finally bought it and received last night. One quick question. Why does each patch has different volume? I mean some patches have really lower volume so I increase my amp's volume, then the other patches have much higher volume so i turn down the amp volume again. There are some Metallica songs that you need to switch between clean and distortion tones.
When I had single distortion (Metal Zone), it was easy as I just needed to even volume between clean and distortion.
Is it defect or do I need to understand something else?
Sir, I just want to ask what are the advantages and disadvantages of GE100?
I’d say for the price, it’s hard to find a device that offers a better variety of quality effects. Super realistic tones and amazing versatility.
Cons: no usb connectivity. No way to upload/download shared patches. Noticeable latency when switching between patches.
Overall. I’m very happy with the product.
@@knightrobot thks sir
Thanks for watching!
Hehee always sir keep doing God bless
Wow that cool sounds
Thanks Dude!
Im new to electric guitars, but can this pedal do 2 effects at once?
It depends on which effect you want. It’s first effect is for: wah/flanger/phaser/tremelo. Choose one of those. The second is distortion. The third is modulation, that includes chorus/flanger et cetera. Followed by delay. Then reverb.
Is it better than Nux mg100?
I’ve honestly never used the NuX so I can’t say for sure.
@@knightrobot ow okay, thanks mate
No doubt
Sir can you do a video on ur patches on mooer ge 100, specially lead , nice vid btw ❤💚🧡💙💛💛💜
Hey Lenny, I’ll upload a video of different patches soon. Thanks for asking
Hi Lenny, I have a new video up featuring all the distortion effects of the Mooer!
How about Latency patch?
Are you asking about latency when switching between patches?
@@knightrobot yes that's right, how is it when you transfer patches, is there a delay every time you transfer patches
@@yoshikimurayama6013 I’ll properly test it out and let you know.
Sorry about the delay in getting this made. This gives a decent example of the latency you’ll encounter during patch switching. Mooer GE 100 Patch Latency Test
ruclips.net/video/3erTtRZW67E/видео.html
Exelent brother
Thanks!
Sir... Does this pedal have envelope filter effect ?(auto wah)
Yes it does. It sounds good too.
Hi sir! May cabinet simulator na siya?
The Mooer has a bunch of built in Cab Simulators. They sound pretty good.
Tanga hindi yan nagtatagalog
@@RandomPerson-ui3xv HAHAHAHA
I bought one few months ago and I realised that any guitar effect processor that doesn't have a USB to import patches in it is usless! Mooer GE100 is one of them. My advice don't buy it, People.
Just copy the settings or improvise one.
For the price point this pedal provides great quality tone
Zoom pedals have a usb out, and software to do better editing.
Mooer 🐄🐮
Lol!
Sandale mase...
dirty slipper ))))
Whoever gave the thumbs down to this video is a chump and I’ll promise to insult them to their face if given the opportunity. I’m an eight foot tall world renowned blackbelt (of guitar, and physical combat in that order).
I own 4 wolves, all tamed by me in the wilds of Siberia.
I’m intense.
And intensely pissed.
I’m assuming “Thumbs Down Gary” over here is upset because he doesn’t rip the doors down with this violently sick Mooer setup, so he has no choice but to be a GARY DOWNER and not enjoy the sweet sound of the MOOS resonating from the hottest Chinese shred-box on the planet played by a shred master. What a clownzo.
I’ll fight you on stilts, Gary Buttchug.
Thanks for the support! And yes! The Mooer offers both Digital AND Analog delay effects.
I'm not sure what emoji to post 😐😏🤣