hey nice project nice work but what if this contains short circuit near gas cylinder and it turns big flame or a blast is there any kind of circuit breaker or fuse that stop from blast or big flames thank you.. plz reply on this
Hello sir, I need LPG gas leakage detector with using GSM module and solenoid valve to off the gas automatically..I need this explain video please sir reply me 🙏...
Sir can I connect Four different sensor the same project ? If I can. How can I write the code and how related to LCD, and send SMS to mobile can you help me please.
@@HowtoElectronics do you know about the sensors for detection of hydrocarbon under the sea, actually we have a project to build a prototype of sea, in which we take a fish tank and from bottom we gona put a layer of sea sand than a layer of hydrocarbon or petrol than other layer of sand than sea water and some air space , and we have to detect that is there any hydrocarbon under sea , if you know any thing about that or any idea so please let me know.
What is the solution? What if am in a place that is in a distance of 5 km from my kitchen...what should I do? Mere detection is not enough ...so solution is must...anyone know the solution?
How can I connect buzzer in this circuit along with GSM Module? And what will be the code for it? Sir please help me as I'm also doing this same project.
Very good project 👍
Bro explain
this video has a good project!!!
Nice video & nice explanation
Nice information 😃💕
Congratulations. Very nice.
Very nice project bro 🔥🔥
hey nice project nice work but what if this contains short circuit near gas cylinder and it turns big flame or a blast is there any kind of circuit breaker or fuse that stop from blast or big flames
thank you..
plz reply on this
thanks it is a good project
Please explain to me how did you get the calibration and the gas level? What is the usual alarming gas level?
Please make a vedio on rain water sensor like if rain comes a shield using servo will cover the house or any other thing
In future i will definately make. Thanks :)
Excelent
Have you used me xcel for the writing of codes?
I have to make this project in very less time please give me an answer as soon as possible
which controller you use in this project
Can u plzz suggest how can i add a buzzer
can it work with other sim rather than 800 or 900 frequency range
hello sir, i would like know, if i add fire and gas sensor together with a buzzer sir..
if can i would like to know the connection and the coding please sir
Which buzzer you have taken any specifications?
thank you sir
Sir gas will be monitering and level was displayed.but sms will be not send. Any resigns.please reply immediately.please sir
Hey sir, can i use telegram instead of gsm to send the signal?
Hey sir, is that connected to pc?
Sir can you explain me which technology you used in that project
My mq5 sensor detects but in lcd it showing 0% only , can you help me ?
On which simulation software you tested it before implementing it sir!
Bro we are in petroleum, and we slected this project so would you help that how we attach the wiring
Hello sir, I need LPG gas leakage detector with using GSM module and solenoid valve to off the gas automatically..I need this explain video please sir reply me 🙏...
Is the wires used are male to female jumper wires
Sir please about buzzer how you have connected?
It shows as SMS SENT but we didn't receive SMS in our phone.please tell a solution
Bro I have one doubt sir.....why fixing rx and tx in 8 and 7 pins
Can we change the another gsm module, will it works
Is it possible to generate multiple phone numbers or numbers manually from outside? That's will be perfect
yes put it in a array
I want to add a external buzzer with this so, what can i do?
Maine code run Kiya aapke circuit diagram ko dekhe par display pahale shoe nhi kar rha haii bina has detection ke
Do I have to keep the Arduino connected with the computer?
Hi, sim 800 GSM does it work only for 2G SIM , because we are trying from 3G/4G SIM unable to pass on it. Could you pls comment on this
How much distance the SMS will come ?
Can I add fans and buzzer to this project
Sir plz help me my soft were is not compiling. But how your compilation come success full. I have the same soft were plz plz plz help
Sir,we done this project as our miniproject.The gas leakage is detected but the message is not received.Can u plz solve the problem for me.
I have made all the connections perfect but the lcd is not printing anything . My potentiometer also got burnt .sir plz help me !!!
Sir can I connect Four different sensor the same project ? If I can. How can I write the code and how related to LCD, and send SMS to mobile can you help me please.
can i use an extra dc fan here?
Why there is need of potentiometer
Plz respond me tell me the variable resistor value you added on the circuit??????plzzzz
10k
sir , i have attached all the hardware and uploded code but iam unable to get the led display , can u please help me
Sir can we use 4g sim
Can we use any other gsm module
Definately you can. I already said this in video
Can you write a code to tell the phone when the power cuts are?
how sim inserted in gsm and message received in mobile?
Bro the problem is when ever we on gas for cooking purpose it ding ding
WHAT IS THE COST OF THE
PROJECT
There is a small component you have connected with the lcd display , can you please tell the name of that component?
i think its a potentiometer
what is the value of potentimeter
Cost of this project
without using code in Arduino we can simulate the circuit
I have arduino,gsm module 900a,MQ-6 but
i have not LCD can do same project?
Yes you can do
Use serial monitor of arduino to test the working of device instead of lcd.
Bro, can you send a soft document of this project to us in which show the how the wiring and coding for sending sms.
Visit the link in description
Visit from pc, the code is invisible to mobile users
@@HowtoElectronics sir i just want to know that is there any need to give power supply to breadboard
Which one is better MQ2 or MQ135
All are better. U can use any
@@HowtoElectronics you are great
i want buy ...
I don't need any sma alert in my project, so if i don't connect gsm module , what changes need in program and also in connections ?
Simply dont connect gsm module.
@@HowtoElectronics thanks , i will give a try.
@@HowtoElectronics do you know about the sensors for detection of hydrocarbon under the sea, actually we have a project to build a prototype of sea, in which we take a fish tank and from bottom we gona put a layer of sea sand than a layer of hydrocarbon or petrol than other layer of sand than sea water and some air space , and we have to detect that is there any hydrocarbon under sea , if you know any thing about that or any idea so please let me know.
Sir can we use arduino nano plz respond me quick !!!
Any arduino board can be used
What kind of sim card do you use for GSM module SIM 800?
Any 2G/3G Sim
Thank you for replying. Is it Micro size?
I am unable to upload code
What is the solution? What if am in a place that is in a distance of 5 km from my kitchen...what should I do? Mere detection is not enough ...so solution is must...anyone know the solution?
1st comment hit like
How can i use 4g sim?
Can i ask for the library sir? please...
bro can u give the project program link
HOW TO REDUCE NUMBER OF TEXT SMS SEND BY GSM MODULE
Hello
Why the potentiometer is used
For adjusting LCD Contrast
What is the name of that round structure inbetween lcd and arduino..? Kindly anyone say
10K potentiometer
SMS alert ravatle bro
Can I use gsm module sim 800l will that work????
Any gsm modem with 2g/3g support will work
What is the circular object kept between the Android and LCD
potentiometer
Can I use GSM module sim800L?
i have that quetion too
How can I connect buzzer in this circuit along with GSM Module?
And what will be the code for it?
Sir please help me as I'm also doing this same project.
yes , sir
I don’t found any code. Please give me the code
You said copy the code ? Where to copy? Krna kaha h copy?
Link is in description
Sir can we use gsm 900A
Yes
@@HowtoElectronics you are really good,
But I request you 5-6 times about power factor improvement using Arduino, please make it soon
Project report मिलेगा क्या
Can I plz get ur mail.. I'm doing the exact project but using 2 ir sensors.... I need to know much about that.. Pls bro
Can u pls add the load cell with this project and modify the source code pls pls pls pls 🥺
Sir,Can we use SIM808 module?
You can use. SIM808 is more better option
@@HowtoElectronics sir thanks for replying, sir can we use the same code?
@@HowtoElectronics please reply sir
You can try
@@HowtoElectronics Thank you sir..it really worked..😄😍
Great.
please can I have your contact am interested in this project
Sir my lcd is not printing anything!!!!!!!!!
Plz help me
Check lcd connection. Use potentiometer 10K at pin3 of LCD and rotate it to adjust contrast.
Sir document vunda e project
Can it detect Alcohol?
Yes
@@HowtoElectronics potentialmeter is required?
Bro can we get message on 2 mobile num of gas leakage...
Check the code and try doing some modification
@@HowtoElectronics is this posible or not?
Please
How to connect our sim to it
Even I want bro.
Insert the sim, the same way you insert in phone. There is a sim slot on back side.
need your email urgently plzzzz....
I just decided to make my FYP BSCS on this project, after watching your this awesome video.
Need your help bro.