Yes,,!but i don't have money to buy pressure power pumps. im only small youtuber..😄 manual only..But after grinding brush i use 800 to 1000 grits sand to remove the existing rust metal
I believe the stem that you have used is for road bike, overall rate 10/10 but in my opinion it would be better to buy a new one rather than build a dangerous rusty and old one although great job👍
My Scott aspect has been in for repair for 2 weeks now. Just to change bottom bracket and crankshaft. I Should have sent it to this guy I'd have gotten a fresh new bike.
@@JappyRestoration I am a noob when it comes to bike maintenance. I did change my cassette, I just didnt know what else was wrong so thought a professional was good idea. I picked the wrong company to use. You've earned a new subscriber 👍
It's all great. But you forget, that all you need is money for new spare parts, tools, paint and other. And all you save is money for the new frame. I think new bike will be cheaper, because always buy spear parts one buy one is more expensive.
It depends on how it was installed. If you put it in dry you have difficulties to get it out after 2 or 3 years if you drive in salty environment ( even with aluminium frames) if you grease the threads correctly it's going out far easier
@@simonm1447nahh still a hard nah water would have washed away all the grease on my friends bike we had so much trouble getting it off and the bike wasn't even that old
Nice bike build! Looks great Please consider putting a little grease on threads to prevent rust and having trouble swapping parts in the future, anyways you did a beautiful job with the bike!
May I ask, what kind of headset did you use for the headtube? I believe it is a standard headset converted to oversize. Same with the bike that I am going to restore... A response would be very helpfull and well appreciated! P.s. from the 🇵🇭
@@JappyRestoration meron na monitized 10k pataas walng year year basta mau views at sub depende po sa views ang bayad at dipende den sa SUBCRIBERS ang monitized kaya mag SUBSCRIBE KAYO
Bro, in 7:40 is it really necessary put that protector? I think i removed mine from my wheel when i changed the tube, because i considered unnecessary, im worry now, by the way, my bike is a beach bike, basic wheel
yes sir..but be sure that the conversion same size in the thru axle or tubediameter.. if you have any question, ask always im happy to discuss thos and thos for you..😊 ride safe sir ..👍
If you don't use rim tape your tube will get cracks over the spoke holes over time ( since the pressure forces the tubes inside the holes) and you get a flat tire. Happened to me despite rim tape, because of high pressure
คนไทยครับชอบช่องนี้มาก
Thank you so much..👍
hi bro i just saw ur t shirt just so u know im from philipines too!
haha...taga asa man ka?
@@JappyRestoration dito maynila las piñas
astig. pwd pala yang ganyan na fork sa lumang model ng bike kala ko hnd uubra
Pwedi nmn idol ..convert nayan sa akin po..😊
@@JappyRestoration pano mo ginawa lods sana mag labas kapa ng mga video sarap panoodin eh
Outstanding job thanks to share Say hello Joe.
Thanks a lot joe..👍
Have you thought of getting a sand blaster to easily remove the rust to bare metal. Just a thought anyway great job!
Yes,,!but i don't have money to buy pressure power pumps. im only small youtuber..😄 manual only..But after grinding brush i use 800 to 1000 grits sand to remove the existing rust metal
@@JappyRestoration 🥺 don't worry bro i subscribed and share i will watch your channel and hope for your best
Sorry we dont do that here its kinda expensive
@@cliptonic69 same
Very interesting
Boss galinga oi....😁😁
Salamat boss 👍
I believe the stem that you have used is for road bike, overall rate 10/10 but in my opinion it would be better to buy a new one rather than build a dangerous rusty and old one although great job👍
..yeah,same size ..converted to nontappered ..thanks for the comment..👍
Proud Filipino 🇵🇭♥️
Shoutout nmn jan ..😄 👍👍👍
Am i the only one who click this video because of the thumbnail that looks hilarious
Sympa le vélo monter à l'envers
Yes bro..play like a circus..haha
Nice Watching From Philippines ✌😍
Hello.. Have a good day ...ride safe..👍🤗
Wow ...congrats jappy..more videos to upload...naa ngyud ads..yehey..mka proud...👏👏👏👏..
Wala pa naga dagan ang revenue 24hours na ...may lng walay defect ani ..😄
WoooW very nice amigo 🤟🏽😎🤟🏽
tnx amigo 👍
Masipag kana Boss.
Mabuhay Ka. 👍🏻🙌🏻🙌🏻🙏🏻🙏🏻🙏🏻❤️
Salamat sa soporta sir @jerome..ingat
WoW gran trabajo, que medida tiene la estructura para sostener el cuadro de bici ,me encantó para pintar, saludos
Thank you..👍
this is worthy of GCN award
Ahaha crazy..! 🙉 ..anyway thanks for watching ...Good day..😊👍
nice paint job!
Thanks!👍
My Scott aspect has been in for repair for 2 weeks now. Just to change bottom bracket and crankshaft. I Should have sent it to this guy I'd have gotten a fresh new bike.
2weeks?oh,removing crank or bracket too easy .. it only takes a minute just follow my steps on that video..tnx for the commnts bro...take care 👍
@@JappyRestoration I am a noob when it comes to bike maintenance.
I did change my cassette, I just didnt know what else was wrong so thought a professional was good idea. I picked the wrong company to use.
You've earned a new subscriber
👍
Akin nalang po heheh 🤧🥰🥰
Ang ganda po
Pag lumalaki na channel bigay ko to...😄
I don’t think this hardtail would take as much abuse as an enduro bike in my opinion it would be more like a heavy xc bike
Just a trail bike
Bhai ek suggestion Dena chahunga ki video thodi si choti banao
Because some people get bored very fast and easily like me yrr 😅
Baki video A1 hai
The bike looks dope, hope to own a MTB one day
🤟👍
A pesar de sus herramientas sencillas ,lo dejó de lujo😱😱😱😱😱😱👍👍👍👏👏👏👏
Maybe consider adding a 1x Shimano Deore drivetrain and it would be a really good light trail bike, overall, very epic build.
Yeah soon if i have budjet..😊
awesome work, love the bike stand aswell
I plan on making video D.I.Y Pvc stand frame for painting..😊 Thanks for watching Budget_MTB channel..Take care..
Looking at the thumbnail my mind was confused lol
Was it upside down? No cant be
Then i noticed the crank and the saddle were switched :|
You got a new subscriber bro. Keep it up
I love it when people put a negative rise stem on their bike and then put a riser handlebar on it. Go down to go up
This So Funny, man.
Yes, this is so funny.
haha...just chill.. 👍✌️😄
@@JappyRestoration
There is Something is smart behind the funny thing .
I mean: you are make a nice bike .
Thanks bro peace out.... ✌️😊
hmm.. old enduro to cross country huh? Not bad tho. Thank you for giving me some repainting ideas👍
Your Welcome sir 👍
this one is definitely from Australia !
Subscribed, good job man!
Thanks for the sub!
Qual o nome desse produto que vc espirou no quadro ?
that's as good as a spanking brand new bike! awesome job!
Thanks a lot..👍
Cool bike 👍
Woww....you literally converts this junk into a dream bike😍😍😍😍
Thanks bro..👍
@@JappyRestoration most welcome bro ❤️
He also converted it to junk first ,and then restored 🤣
Good restoration but I wanna know who the hell built it upside down 😂
😄✌
Yes. I was like wtf
@@বাল-তেজাস thanks maderfaker 😄
Yeah Who ever he is I like him
Шикарный велик получился!
Parabéns ficou show👏
Wft 🤣🤣
And Nice work
It's all great. But you forget, that all you need is money for new spare parts, tools, paint and other. And all you save is money for the new frame. I think new bike will be cheaper, because always buy spear parts one buy one is more expensive.
Nice job the bike looks expensive hope you get 1k subs soon
Thank you so much...👍
This so Amazing nice viedeo
Thank you so much..ride safe..!👍
Salam restorasi dari indonesia 🙏🏻
tnx
Woah that's awesome
Nice sir galing mo
Ganda naman yan bro keep it up!
Thanks bro 👍
ang galing idol
Thank you idol 👍
just a little tip sir.. if you will use flourescent color,, use white as base color to have maximum results :)
Yes,i know..you are right..but i like sparklingsilver for my basecolor
Angas gagi
Pa share nmn tong video ko idol..🤗✌️..thank you
Amazing ! Its beautiful
Thank so much ..👍
Good 👍😁
ayus ayus parang santa cruz tignan 😅
Ahaha isa din ako sa fans ng Sta.cruz Enduro 😄.Salamat sapag comment idol ingat.👍
I want to upgrade my cycle just liked that 😌 . N big fan sir ji😍
Ohhh...welcome sir.!ride safe..👍🔥🔥
Keep it up idol wag mawalan Ng pag asa 🥰
Salamat sa soporta idol..ingat 👍
What a great job you did on this one bro. Keep it up!👍
Thanks a lot 💚👍
thanks for the guide, cool
Thank you eds_tv channel..👍
I like you experience bro ♥️ . Haw much it now
Would love for your videos to show where the bikes ended up and if you sell them maybe include how much you spent vs how much you made. Nice job
Mais entendo muito sobre essas bicicletas, mais vi um vídeo que um cara transformou uma dessas aí com suspensão e tudo ! Tipo aquelas profissionais.
Thnks for the comment bro..❤️
Qual nome do quadro man?
Nice video !!! Bro
Thanks for watching
@Fab E i burdlaz MTB channel..
Ride safe..👍😊
@@JappyRestoration thanks mate ! 🔥🔥
Nobody going to talk about why is the bike reversed ?? 😂😂 , and also great video
There is something going on. No way did that bottom bracket come out that easily unless it was purposely rusted
He sprayed WD-40,
Isn't it obvious these restorations are "fake"? I still enjoy watching it, it's kinda like wrestling i guess
It depends on how it was installed. If you put it in dry you have difficulties to get it out after 2 or 3 years if you drive in salty environment ( even with aluminium frames) if you grease the threads correctly it's going out far easier
@@simonm1447nahh still a hard nah water would have washed away all the grease on my friends bike we had so much trouble getting it off and the bike wasn't even that old
@@ape337YT water inside the bottom bracket thread?
It was a piece of art with the front fork upside down like that.
You completely ruined it 😔
Galingggg!!! Gawa ka ng mga ganitong content boss, sure lalaki youtube channel mo!
Salamat boss..👍
Great job bro!!!!!!!
tnx..👍
Nice bike I got 2 customs bikes I painted myself been riding for 4 years and lost 250 pounds in 4 years I love riding.
Congrats bro..!💚
Ride safe...👍😊
I like how the frame is upside down
😄✌
Noooooo Brooooo 😭😭😭😭😭 you got it set up to be a 1 by in the back and got 3 rings in the front
I’m tired 😴 so I forgot to say this but pls know u did a very good job of getting the rust off and u did a good painting on the bike
Thanks 👍
What kind of headset is that? Is it for road bike that is 34mm?
44mm converted
@@JappyRestoration The frame is standard?
Nice one lods...
thank you lods..👍
Nice bike build! Looks great
Please consider putting a little grease on threads to prevent rust and having trouble swapping parts in the future, anyways you did a beautiful job with the bike!
May I ask, what kind of headset did you use for the headtube? I believe it is a standard headset converted to oversize. Same with the bike that I am going to restore... A response would be very helpfull and well appreciated!
P.s. from the 🇵🇭
Ficou show parabéns 👏👏👏👏
A bike tava parecendo um tranformes
Sending support lodi..keep it up.godbless
Tnx ..lods
Which fork did u use?
Great work i rate it as 10/10
Thank you 👍
Beautiful bike restoration, the paint job was interesting how you achieved it. Would be nice to see you riding the bike for next time.
tnx for the commnt 😊✌️
Wow, very impressive!! how much did you spent out of your own pocket? just curious.
Piso..😄✌️
@@JappyRestoration HAHHAAHAHA
@@JappyRestoration piso😂
Wd 40 nga 100+ na e hahaha
Hindi ko tinansia idol..✌️😊
@@JappyRestoration new subscriber moko lodi..
Pabalik
Thank you
You just motivated me to upgrade My Old hard tail .
Enjoyed the video.
By the way do you think working on Old bikes Worth it?
Yes, definitely The oldbike reborn ☺️
Thanks.
gotta go upgrade the old hard tail 😉
Super Arbeit...... Wie immer👍👍👍👍👍
Thank you ..👍
Ese eres you! 👍👍👍
...thanks 👍👍👍
Amazing job sir.
Thank you
Amazing! Im subbing 😁
Oh thanks!
@@JappyRestoration your welcome!
Pashout out boss,parestore naman narestore na kita tnx
Thanks lods
0:16
My friend's dream bikes
Put this on mute if you don't want to be annoyed by 4 different songs playing at the same time.
That came out so good !
porque el asiento esta abajo y los pedales arriba? 0:05
New design..😁✌️
Wow!!😍😍😍🙌🏻🚴🏻♂️
I like more the "old version".
great job sir
Thank you sir ..ingat 👍
Tuyệt nhưng chỉ cải thiện cái khung còn lại bỏ đi hết😋😚😙😙
Astig ng frame! Nice build boss! 🤘
Thanks Lodi..🙏
Baliktad po yung body🤧
Pano ka mag sakay po dyan at mag pedal ask lang lodi?
Nice transformation po💖
para madali pg tangal ng Bottombracket lods..ang BB kc ang pinakamahirap tangalin sa part ng bike..wla kc akong bikestand lods..diskarte lng
Pa sponsor naman lodi ng fork suspension kahit pinag lumaan muna basta nah bobounce ok lng po
Wla napo idol binenta kuna .. para pang bili ng pintura..sa susunod nlng idol baka nmn lumaki ang channel natin ... 😄🤭
@@JappyRestoration oummm sge pag nag 100k wag moko kalimutan ha
Hahaha wala pa tayong sahud dyan ..hindi pa ako monitized haha1 year pa cguro
@@JappyRestoration meron na monitized 10k pataas walng year year basta mau views at sub depende po sa views ang bayad at dipende den sa SUBCRIBERS ang monitized kaya mag SUBSCRIBE KAYO
Salamat idol ..pa share nmn ng video ko ..😅👍
Good job! But it would be even better if you put back the Chevy logo. 👍🏻
Ok thanks!
Bro, in 7:40 is it really necessary put that protector? I think i removed mine from my wheel when i changed the tube, because i considered unnecessary, im worry now, by the way, my bike is a beach bike, basic wheel
yes sir..but be sure that the conversion same size in the thru axle or tubediameter..
if you have any question, ask always im happy to discuss thos and thos for you..😊 ride safe sir ..👍
If you don't use rim tape your tube will get cracks over the spoke holes over time ( since the pressure forces the tubes inside the holes) and you get a flat tire. Happened to me despite rim tape, because of high pressure
👍👍👍
👍👍👍
Shout out pd ta idolo mulong from lapad..
RR
Whenever I see these type of vids, I feel like my MTB is fake... Anyways keep up your good work, Nice skill ❤️❤️❤️
Thanks for watching ..👍
Your mtb must been a vintage mtb so its still an mtb but old