I just got the Nova Pro Wireless and was wondering is there any way to tune the headphones to sound a bit better when connected via bluetooth to my Samsung phone, since there is no sonar on android.
For the headset itself, not really. Bluetooth is just that way. The wireless mode with the base will always sound better. Although, you can get an app on your phone to EQ or equalizer app. You can play sound with it to mix the audio to your liking. Might be a bit of work but you can add back what you're missing in the audio.
When you are connected directly with headphones to the Maono microphone to listen to the sibling in real time, my question is this: if you use sonar and apply a preset such as deep voice, do you have a delay in listening on the headphones connected to the microphone?
Well depending on your audio setup you shouldn't hear any modifications at all with the steel series change to say the deep voice you will hear it raw coming through the microphone and then if you set your computer to go out that for all of the sounds then you'll be able to hear all your computer sounds as well But unless you do monitoring from the source for steel series for the output, then you won't hear that change being done in real time. But if you did do all of that, then there shouldn't be much of a delay if any, even though there is processing and that does take a little bit of a delay, but from what I've been able to notice, it's virtually zero.
@@MasterOnTech When I set the “deep voice” effect on the microphone in the sound equalizer, in order to hear it in real time when I speak into the microphone I have to switch to the “streamer mode” trim?
You would need to set in windows on the steel series microphone source to listen in realtime. But if you do streaming and you use your output to hear you'll be heard twice from the microphone setting and then the actual computer sounds because I'll be playing through both. You can do a test recording to hear how it sounds in steel series.
On Windows 11, go to the start menu and search sound settings. Go to the bottom and click on more sound settings. In the new window, you click on the recording tab. Find the steel series - microphone in the list. Right click on it and click on properties. Click on the tab labeled listen. Click the checkbox for listen to this device. Now you should hear your mic with steel series adjustments.
Do you have the Nova set as the microphone in steelseries? Make sure the sliders below where you select the mic is all the way up. I would do a mic test inside of discord or use Windows to monitor the mic
Is it free app i use nvidia broadcast but its shit app this app canceling my background noises or not because im on call of duty i play most cod multiplayer i want my background noises cancel and soorunded voices
@@MasterOnTechthe headset is the wireless version of the steelier Arctis nova pro. So it’s connected to my ps5 do I need to connect it to my MacBook as well though Bluetooth?
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Amazing vid again thank you so much for the explanation!
Thank you so much. I hope it helped with your settings.
I just got the Nova Pro Wireless and was wondering is there any way to tune the headphones to sound a bit better when connected via bluetooth to my Samsung phone, since there is no sonar on android.
For the headset itself, not really. Bluetooth is just that way. The wireless mode with the base will always sound better.
Although, you can get an app on your phone to EQ or equalizer app. You can play sound with it to mix the audio to your liking. Might be a bit of work but you can add back what you're missing in the audio.
When you are connected directly with headphones to the Maono microphone to listen to the sibling in real time, my question is this: if you use sonar and apply a preset such as deep voice, do you have a delay in listening on the headphones connected to the microphone?
Well depending on your audio setup you shouldn't hear any modifications at all with the steel series change to say the deep voice you will hear it raw coming through the microphone and then if you set your computer to go out that for all of the sounds then you'll be able to hear all your computer sounds as well
But unless you do monitoring from the source for steel series for the output, then you won't hear that change being done in real time. But if you did do all of that, then there shouldn't be much of a delay if any, even though there is processing and that does take a little bit of a delay, but from what I've been able to notice, it's virtually zero.
@@MasterOnTech When I set the “deep voice” effect on the microphone in the sound equalizer, in order to hear it in real time when I speak into the microphone I have to switch to the “streamer mode” trim?
You would need to set in windows on the steel series microphone source to listen in realtime. But if you do streaming and you use your output to hear you'll be heard twice from the microphone setting and then the actual computer sounds because I'll be playing through both.
You can do a test recording to hear how it sounds in steel series.
@@MasterOnTech That is, how exactly to do it. Please how could you show it? Where exactly do you set it to make it right
On Windows 11, go to the start menu and search sound settings. Go to the bottom and click on more sound settings.
In the new window, you click on the recording tab. Find the steel series - microphone in the list. Right click on it and click on properties.
Click on the tab labeled listen. Click the checkbox for listen to this device. Now you should hear your mic with steel series adjustments.
I just got a steel series artic novas 1 but i csnt hear my mic when i try testing and at first i could hear very lowly but it would cut out also
Do you have the Nova set as the microphone in steelseries?
Make sure the sliders below where you select the mic is all the way up.
I would do a mic test inside of discord or use Windows to monitor the mic
@@MasterOnTech t I don't have the option for Steelseries but when I go to capcut it allows me to select them do idk why sonar isn't showing it
If you don't have any audio device options, you may want to reinstall steelseries and let it find the audio sources.
Is it free app i use nvidia broadcast but its shit app this app canceling my background noises or not because im on call of duty i play most cod multiplayer i want my background noises cancel and soorunded voices
Yes steelseries is free and nothing to pay for.
Using the clear AI should remove 90% of all background sounds
Hi I got the Steelseries arctic nova pro wireless and I have a MacBook Air m3 I can’t seem to get gg to recognized my headset
Well I do not have a new Mac with a M chip. I only have intel CPU macbook.
But I can help troubleshoot. Are you using a USB dongle or bluetooth?
Bluetooth I believe
@@MasterOnTech I saw that sonar isn’t available on MacBook only windows would that have something to do with it?
Well for Bluetooth it should still work. Does it show up when searching new Bluetooth devices?
@@MasterOnTechthe headset is the wireless version of the steelier Arctis nova pro. So it’s connected to my ps5 do I need to connect it to my MacBook as well though Bluetooth?
😍😍😍webcam details plz
I have a Panasonic gh4 camera I use for my videos. I have it plugged into a elgato PCI Express capture card to be a webcam.
Can i use it for any device brand. Like I'm using Logitech g435 to enhance the mic and noise cancelation
Yes, you can use any mic and head set with sonar. You just select the audio source and the settings and you're on your way lol.