Haas UMC-750 First Look
HTML-код
- Опубликовано: 3 окт 2024
- Learn more about the UMC-750 here: ow.ly/2oRm30mTtzQ
The Haas UMC-750 is a versatile 5-axis universal machining center with 30" x 20" x 20" travels and an integrated dual-axis trunnion table. The machine is equipped with an inline direct-drive 40-taper spindle (8100 or 12,000 rpm), and comes standard with a 40+1 tool side-mount tool changer.
The trunnion can position parts to nearly any angle for 5-sided (3+2) machining, or provide simultaneous 5-axis motion for contouring and complex machining. The machine provides +110 and -35 degrees of tilt and 360 degrees of rotation for excellent tool clearance and large part capacity.
Don’t miss any Haas videos. Click here: ow.ly/s28l30mTiUo 
Наука
It is refreshing to see an efficient program used for demonstration purposes. So many machine builders try to show off their machines with very in-efficient programs that make their machine look bad. Kudos to Haas
Another outstanding video of a fantastic HAAS machine. I'm a teacher in Australia and we have a new TL1. I will be showing this video to my students. Keep up the great work. Kind regards Aaron.
Very impressive. I'm just learning with time on a Bridgeport EZ Track, but have shadowed our machinist on HAAS 3 & 5 axis CNC's and ran setup and operations on the 3-axis for a simple part. This is very cool to watch. Two work setups and two operations to completion. Nice.
Hi ktmktmman, thank you for the question and comment. The new Haas UMC-750 has new software features called Dynamic Work Offset (DWO) and Tool Center Point Control (TCPC).
G234 Tool Center Point Control (TCPC) is a software feature in the Haas CNC control that allows a machine to properly run a contouring 4- or 5-axis program when the workpiece is not located in the exact location in which the program was created in a CAM system.
Haas does a lot of entrustments to schools (from high schools to 4-year universities to technical training centers). Just depends on the school’s needs and whether Haas can help. The UMC would be a HUGE gift, but you never know. Thanks for the question jpetrov0.
I work in a very busy job shop. We have close to 100 CNC machines. Okuma, Fuji, Hyundai, Mazak and Haas. We have perhaps 18 Haas machines. 12 lathes and the rest milling centers. In my shop, the operators are very hard on machines. Wrecks are spectacular. I judge a machine on how easily us maintenance guys can repair it and return it to service. They are all good machines in there own way, but the Haas's are the easiest to repair and get back to making chips. Which makes us money.
Hey, you've earned it. I have been there over a year, and there are very few machines I have not put a wrench on, but the Haas machining centers are one of them. We have two large milling jobs that I have only done PM to. I haven't had a downtime ticket yet. That is rare, and worth calling out!
Absolutely not Migel. The UMC is completely of our own design and based on the idea of a universal machining center (which is common among many CNC machine manufacturers). Thanks for the question Miguel.
Thank you so much for the kind words Aaron. We hope your students enjoy the video. Please let us know if there is every anything we can do for you!
>>> Continued
Tools can be set using standard tool setting sequence, but with the Haas Wireless Intuitive Probing System (WIPS) standard it is best to use the tool setter on the machine for setting tool offsets. The on screen templates help you through tis process. Refer to any of the WIPS videos for details on this. Tools are set the same on the UMC as any other Haas mill.
Thanks again motel29, hope this helps. Please let us know if you need anything else.
Love these machines!
Could spend all day watching cnc's work.
Hopefully i can one day get a VF2 :D
Hello Hombre oso cerdo. The UMC is designed for 3+2 machining and full 5-axis machining. The video focuses on 3+2, but be assured, the UMC-750 is full 5-axis capable. Thanks for the question.
Hi thebjgj2. The UMC-750 is a full 5-Axis machine. Thanks for the question.
Hello TheDIMONART. Thank you for the inquiry, but unfortunately we only sell complete machining centers and not components. Sorry. All the best on your DIY CNC machine.
G254 Dynamic Work Offset (DWO) is very similar to TCPC, except that it is designed for use with 3+1 or 3+2 positioning, not for simultaneous 4- or 5-axis machining. If the program does not make use of the B- and C-axes, there is no need to use DWO.
Find more information on online at HaasCNC.com - Manual Updates - Manual Addendums - UMC-750 Operator’s Manual
Thanks for the great compliment smacman68!
Thank you for the compliment motel29.
There are no specific 3+2 or 5-axis features built into the Haas Intuitive Programming System (IPS), our conversational programming system that makes set up and operation easy. In fact, because of this we do not offer IPS on the UMC.
Continued >>>
Can you give me this piece, with mastercam programming ? Thanks
1:32 great clearance Clarence!
Hello and thank you for the question ydna2. 254 Dynamic Work Offset (DWO) will be added to future machines in the coming year. Thanks again.
Hi kristianvkt. We are working on a few other things right now, but if we upload a full 5-axis video you will be the first to know (since you subscribe to the Haas channel). Thanks for the interest and the question. Have a happy holidays and great New Year.
Hi CNCsBest. The UMC-750 will be less expensive than a DMG of similar capacity. Thanks for the question and the comment. Have a great day.
Love these machines!
Could spend all day watching cnc's work.
Hopefully i can one day get a VF2 :D
Hi Jason. You can do the circular and square pockets in the control of the UMC-750. The Haas Intuitive Programming System (IPS) makes eccentric pockets easier to create - user friendly is what defines the Haas control. Thanks for the question. If you would like, send me your info and I will have someone from your local distributor contact you to talk about your needs and the UMC. You can send me your info here: contact@haascnc.com Thanks again Jason.
I am sure it is very nice. getting a high quality 3 or 4 axis can be a much better move from a productivity standpoint.
A Tormach? There is always next time for a Haas TacticalKeychains. Thanks for the comment and have a great week.
Unfortunately not MrOneGoodFellow. Thank you for the question.
Advanced and very productive machine. As usual, Haas is continuing to lead the way in innovation. 2 part question: What are key differences for the operator on the conversational side? And ( please forgive my lack of knowledge), In what sequence are tools touched off?
Thx.
great work
You are correct Hombre oso cerdo, we do not have a video showing the 5-axis capabilities nor does our distributor Hi-Tec have a UMC anywhere in Mexico. We will have a UMC at TECMA 2013 in Mexico City, March 5-8.
In the meantime, you can send me your information and I will have someone contact you. Or, you can contact someone from the Haas distributor: (01) 5565-9008. Thank you.
I dream of having one of these in my home garage someday.
They require 3 phase power
Very impressive. When I grow up, this is what I'm going to get.
More videos upload please.
It's knowledge and enjoying.
The UMC 750 is an amazing machine. The company I work for has one, I’ve gotten to operate and set it up a few times. Hopefully someday I’ll be able to program 5-axis parts.
Hi me from the past. Since writing this comment, your work has gained another UMC 750. You’re also programming 5-axis, lathe and 3-axis parts now, you’ve come far dude :)
Lol 🤣
i got tears in my eyes
Should have had your safety glasses on!😂
Nice looking 3+2 machine. I wonder how it handles true simultaneous 5 axis.
nice showcase, excellent light-duty machine
really super,I was Hass operator in vf3 and vf4 Iam interested in UMC
@ChainBreakerHQ2 Uh, for fun of course! Plus, it's way awesomer than my mill :)
This looks fantastic.
Amazing
Where I can download this piece with mastercam programming. Thanks
Guys, don't buy this from Walmart I got scammed! They sent me a 3d printer thinking I wouldn't have a clue, but it was the first thing I immediately noticed when the part was finally done and just didn't have the right look about it... Boy did they try to pull a fast one on me!
Hi haasautomation, Is this machine more affordable than a DMG of similar capacity and options? You guys did a great job by the way.
The machine does not seem bad! But for a machine in 2013, it seems to me a little too slow. The x and y rapids are okay (Although the rapids of the SS machines would be appropriate here) but the rotary axes must be faster in the long term! And what is with a HSK-A63 or a HSK-A50 spindle?? But still, the machine is quite okay!
Good video - Nice machine & Excellent fixturing.
Tormach Is a basement machine. Not bad for working at home or in a small shop, but not even in the same universe as this guy here.
I don't suppose there's any possibility of getting one of these donated to my college, is there?
How about machining som stainless steel instead of always aluminum. It would give a much better insight of the stability of the machine.
The biggest mistake that moldmakers can make is to think that adding 5 axis increases capablity. Adding a high accuracy 3 axis machine will increase throuput in a moldshop far more than a 5 axis machine that does not have the volumetric accuracy to cut molds to negative stock models without handwork. Blow Molds are a little different than Plastic injection but be careful in thinking that 5 axis alone will upgrade your abilities for making molds. This adds two more axis of compounded error.
Jeez. There is Zero post processing. Ready to go
I want one! Just have to figure out how.....
Unreal beautiful
Hi
How to know about different types of operations like that circular interpolation or helical interpolation.
Hello JASCOBAR. I just sent you a direct message here on RUclips. Please let us know if there is anything else we can do.
power full machine
The best machine.
What is the difference between the 750 and 750ss? Besides the obvious differences like spindle and rotation speed, does the ss have more processing power to compute 5 axis moves? Is the non ss machine more accurate?
Wonder what the software is like, is it user friendly, like circle pocket cycles, square pockets, etc. Can you program excentric parts standing at the machine. I run a fanuc robo drill. We might be getting one of these machines.
Hi sir is there any video related to tool mounting in magazine with respect to program ..
Please share
what the facemill brand?
I am going to be a student at MCC-Business & Technology in Kansas City at I-435 & Front Street. All CNC is HAAS. Is there any simulators online to learn your system and programming? They use at this time MasterCAM x7.....I think. Can I learn on your systems on a online simulator how to use & understand nested commands and such.
Dear Haas, is it possible to buy control panel and power electronics? Do you sell kits for cnc DIY hobby, like servomotor controllers?
What is the first Tool?
hi i want to know about this machine like bed size spindle capacity and price ...(if this channel is transferency )
thanks
regards
how long did it take to machine this part in real life? or did it actually take 5 minutes?
what about full 5-axis simultaneous machining. will u upload video
Dear Santa,
Dear Santa,....................
do these come with tools or the lathes or mills? or is that extra?
Is the dynamic work offset software available on other machines besides for the UMC series? It would be great to have on a vertical mill with a regular 5axis trunnion...
Is it full 5 or just positioning?
Can the table spin fast enough to work as a CNC lathe?
How much Time need to mfg these Job.
Adamlar bi parça bağlamak için özel mengene yapıyorlar vay amk.
What brand are the tipped tools?
nice machine...
Jeez big one he probably got hurt doing this-
Can someone tell me if this machine is capable of machining custom rims for motorcycles and/or cars? Or if theres another machine thats good for machining custom rims?
It definitely is, the machine travels will dictate how large a wheel you can make, so if you need something larger than what the UMC can accommodate we would need to look into a larger machine. All the specs for the UMC including travels can be found here: www.haascnc.com/machines/vertical-mills/universal-machine/models/umc-750.html#gsc.tab=0
What program was used to make this parts, Fusion/HSM from autodesk?
@BIR_jass Have you seen when I asked this? In the meantime I heard that they used MC for this. And have worked with a 750 myself for a few years.
@BIR_jass Thanks I guess, not working with machines much these days haha.
I got 25 years experience.just looking out for the miss guided
1:02
Es excelente y rápido
from which manufacturer is the second tool?
Hello and thank you for the question BroncoRossi. The second tool in the video is a Walter cutter using the F3040 insert.
Haas Automation, Inc. Walter cutters are the best.
BroncoRossi kl
now enough Gams und do a steal Part.
Tylko nie UMC 750 No More Umc 750
Next your going to weld cast.iron or cast steel another big no no..iron creates serin gas
Класс!
Like x10!
Fricken beeechin !!!!
😊
EMANG BOLEH BUAT MESIN🇮🇩😂
DESIGN MESIN GIMANA Siii🇮🇩😂
Rolltech Innovation manufactures machine coolant saver. Serious threats to productivity and health are bacteria and fungi which are commonly found in industrial coolants. This coolant bacteria filter has some advantageous features include: last a life time, with guarantee of extended life of coolant with bacteria filter - no consumables, no electricity, no chemical dosing, etc.
It is a one time investment, ROI within 4-6 Months, Saves on input of fresh oil and disposal cost like etp treatment, or giving it to authorised recycler.
These mineral oil based coolant are prone to generation of bacteria which produces foul odour, often from hydrogen sulfide [rotten egg smell].
Rolltech Innovation "Aqualogic" filter is an innovative and economical method of continuously controlling these micro organisms and the odour they generate. "Aqualogic" bacteria coolant filter consists of series of high-purity multi-metal fibres cased within a stainless steel tube. the dissimilar ions in the multimetal alloy bed undergo a natural electrochemical reaction, also known as an oxidation-reduction reaction. Which Kills the all the Microbial activity in the coolant 24/7
call us at +91-702-723-6191 or write to us at rolltechin(at)gmail.com
Enjoy the coolant being running without changing it, just keep the coolant healthy
DESIGN MESIN GIMANA sii🇮🇩😂😂😂
Mazepin
Bout as ridged as a soggy cardboard box
Engineering porn.
5 axis machine! and 2 axis tool path!!!! a VF0 from 1993 will run the part cheaper
La máquina es horrible, no dura 2 meses sin una avería...
สุดยอดcnc
HAAS UMC 750 MILL
[Specifications]
Travels
X. 762 MM
Y. 508 MM
Z. 508 MM
Trunnion
Table Size. 630×500 mm
Capacity. 300 kg
Number of T Slots. 7
T-Slot Width. 16 mm
T-Slot Center Distance 63mm
Spindle
Speed. 8100 rpm (12000 rpm in option)
Drive System. inline direct drive
Max Torque . 122 Nm @ 2000 rpm
Max Rating. 22,4 Kw
B-Axis Tilt
Travels. +110°, 35
Max. Speed 50°/ sec
Max Torque 542 Nm
Brake Torque. 2440 Nm
C-Axis Tilt
Travels. 360°
Max Speed 50°/ sec
Max Torque. 407 Nm
Brake Torque. 678 Nm
Feedrates (linear)
Rapids X. 30,5 m/min
Rapids Y. 30,5 m/min
Rapids Z. 30,5 m/min
Max Cutting. 16,5 m/min
Tool Changer
Capacity. 40+1 SMTC
Tool Type/Taper. CT or BT 40
General
Coolant Capacity. 284 L
Power Required (min). 354-488 VAC 3-phase 50-60 Hz
Air Required. 113 Lpm @ 6,9 bar