I believe this is the one of the most difficult clutch and dual mass wheel replacement. You need to dismantle half of the car to get access to the clutch plate. Well done Kevin. Love your videos!
I just can't believe you drop the whole engine like that in the driveway, truly amazing! Plus I'll never understand how you get the whole damn thing back together again afterwards, that's the real magic...
Hi Kevin, I heard your customer comment about Skoda in New Zealand. I live there and two years ago (Xmas) we bought an RS245 Wagon over a VW. The simple truth. All the same tech as VW & Audi for a 1/3 of the price. I stumbled across your channel as i was looking for someone who's replaced rotors and brakes on a VAG car. I need to admit, you're very exceptional at your job Kevin; you make it look so easy - clearly it's not. I wish you all the best health and a long career chief.
I did the clutch on my 1990 Volvo on my driveway after watching a Chrisfix and reading how to in my Haynes manual. Before that I hadn't done any mechanical jobs other than oil change. Wasn't very fun at times and took about 3 days but the satisfaction was well worth it in the end. Keep up the good work 💪
This guy is an absolute soldier! I done clutch repairs for my first year as a mobile Mechanic but I had to quit. Back breaking work. I only do the light repairs now.
I'm right with you bro!! The work he does, and the level of professionalism he does it with, is NOT for the average person OR skilled mechanic! As I said before, he is in a class by himself!!
This is my 3rd 2.0tdi video I've watched of yours.. You've tought me well. My clutch comes tomorrow 😝👍 Like a virgin, cluched for the very first time!!
@@WMCS I've bought a rear main seal too, my cars mk2 seat leon 135k, when the flywheel is off, can I change it there and then? I'm not 100% Much appreciated!
Not sure whether your mechanical aptitude or work ethic is more impressive. Qualities that seem in short supply these days. Not extinct, but increasingly rare. Full respect 👍
Just bought an Octavia 1.8 TSi, so watched this to see just how much could be involved in changing the clutch. I’m debating doing this job myself, and I have a ramp!!! You did this on the floor!! That’s hard core! Ha! Nicely done!!
Hey Tim.., thanks so much for the feedback.,, you’re one of my heroes. So that’ll be a dream to meet up one day. I’m still a big fan of your videos. I was actually just watching the detailed tour of your mobile workshop just last evening.
@@WMCS I REALLY appreciate that bro, but TRUST ME, the hero here is YOU. If you ever call our shop for a price on ANYTHING that has to do with a clutch or transmission, they will tell you we don't do anything that has to do with them. So to watch you do what you do, ON THE GROUND, is PHENOMINAL!!!
Being able to comfortably replace clutches of various models at people's homes is a skill most of us have not seen anywhere else - bravo! Kevin-Albert, what would you say are the manufacturers you enjoy working on the most, or could you name a few you find the easiest to work on?
Amazing !!! I watched few of your videos and am wondering, how come someone out there did NOT offer you a great job and pay that you could not refuse, you're one of the best out there. Ed China has nothing on you, nothing.
Glad to see the snow and ice has gone for you hope you have a good summer and some nice weather you deserve it love you're vids you are a man at the top of your game
I say it all the time the mans got the skills and a bionic chest keep lifting those gearbox’s in and out. Fantastic work and love how you still make the time to do the videos for everyone to watch👍👍👍
Christ alive Kev thats hard work.. in winter.. on the floor.. just great.. I did my nissan pathfinder clutch and drive plate on the floor in the summer last year... hardest job I've done.. certainly as hard as an engine replacement if you replace the clutch on axle stands..
If I made a video of changing out a wheel bearing I'd be on week three by now. I was gonna call this guy his reputation is phenomenal. I hope you go from strength to strength dude.
Bonjour a toi William je te tire mon chapeau car je le faisais il y a longtemps le plus dur c'est de prendre la boîte de vitesse sur toi et de la remettre très bon travail continue a +
After having watched several of these tutorials of how to change the clutch on VW and Skoda models, I think I will have a go at the clutch of my 2003 Skoda Fabia this summer. Just for the fun of it. It does not seem to difficult at least when William does it. I am not shure though, if I will replace the flywheel, since i is a fairly expensive part.
Before I watch this video, I'll just comment... I followed your videos on the Insignia and the Astra (I have the 13 plate SRI Insignia) to help me to do the job myself, because I was well outside of your coverage area. I purchased the Sachs clutch kit (including DMF and new CSC), purchased all of the tools necessary and I followed everything you did on those jobs. The end result? SUCCESS! And I can't thank you enough again for your videos. You inspired me and gave me the confidence to do it myself and it was a 110% success. Of course, the job took me 10 hours opposed to - how long does it take you? 4 or 5? The DMF was battered and needed grinding off, the pressure plate bolts were rounding off and I had to find equivalents to replace (could hardly get them off without drastic measures) and every step of the way seemed to throw something new at me - really gave me a challenge. I'm now all beat up from doing it - especially my right hand from trying to get to that evil bolt on the back of the starter motor - you know the one? How do you do this every day? Are you a machine? Big kudos to you.
Lee what a day you’ve had by the sound of it. Firstly., the main thing is you got it done 🍻🍻 Now that is a baptism of fire on your first one you get the flywheel spin. And you managed that. And secondly yes. That infamous starter bolt. Hats off to you and really glad to hear the video came in handy. It’s not the easiest job these insignia. Box a bit heavy as well.
@@WMCS You're not kidding about the box weight. I am a body builder and still struggled to wiggle that lump onto the engine. The job was fraught with obstacles, the flywheel being the worst of them all. I could have paid for someone to do it, but I am never one to say "no" to a challenge. I have a great appreciation for what you do. You make it look easy :)
Brilliant work, I wish I had the patience and dexterity to do that kind of job on the drive. Incidentally that was a very clean engine bay for a 12 year old diesel..
Maestro Sir Kevin..............I just cannot get enough of your style ,...............er where did that part go ? you know Sir and you mend fix replace. faultlessly ! If I leaved back in Slough Id be ya wingman ! That's just it YOU DO IT ALL ON YOUR OWN, i sign so impressed, Ill be back. I handled a gearbox into a mitsi legnum 4wd v6, what a mission and ya pick up like the weigh nothing, AND YOU EDIT AS WELL , what more can I say, thank you Sir for ya time
I figured I found all the interesting car/mechanic geared youtube channels. CarWizard, Hoovies Garage, Precision Transmission, LegitStreetCars, Garage54, Velocity Garage, Torque Test Channel, Tatro Machine, and restore it. Always a pleasure having the RUclips algorithm gods bless my feed with new automotive geared channels and this channel certainly fits my viewing needs perfectly.
Thats a good days graft in a heated workshop with a ramp. & with out having all the camera set up. You must have a few customers watching out the window in disbelief as you disassemble their pride & joy. Your attention to detail is dyeing skill.
Hi Williams you have a very good and very performing technique, I have admired you for some time, I have seen your centering device for the clutch disc of what material is it made? Thanks for everything you share you are truly a very good professional. A hug from Verona Italy.
Good job! My friend, besides the fact that you do a good job and that you know how to do your job. Rarely encountered in other youtubers, you also have a special talent to present the work you do! In my opinion, you can easily be a good film director. Again, good job Kevin!
I had seen the other video, behind the scenes, and it seemed strange to me that you hadn't shot any video with the skoda, but as always you never disappoint.I hope I am not wrong to write I am not an English language speaker.
It looks like you don't have to deal with rustwelded nuts and bolts that often? Here in Sweden, it's sometimes a nightmare, the only friend being the Induction heater.
Hi. Why do you not use a hose with a bottle to bleed the coupling? Then you don't have to clean everything with brake cleaner afterwards. Greetings from Germany.
great job Kevin! here in Italy we don't have mechanics who offer a service like yours. You are great!! just one question: what liquid do you use to clean the flywheel? Hello from Italy!
Great one! It seems that the left axle shaft was changed. And for sure it needs new brake discs. It is strange a rusty bolt in the battery base. Too much condensation, maybe. Thanks a lot for the video!
The amount of corrosion on such a new car is surprising, I wonder if you could use hammer right or something similar to protect it , since it’s open to the elements
Awesome work, can i ask did this car have a clutch judder? It would be amazing if you could mention the fault, i may have the same on mine unfortunately
Had these guys do a clutch for me a while ago, great service at a great price, they are truly magicians at what they do from the quote, to getting the job done, a superb company team effort
Great vid.. Just wondering what brand impact extentions and sockets you use... I've been through quite a few cheap chinese ones they round pretty quick...
I order parts myself. So it won’t be wrong. Nothing gets damaged. Anything I find I report to customer., to take to their local garage. I have one job. And one job only. To replace a clutch.
@@WMCS I find even when we order the parts they are often wrong, especially from euro parts so was curious how you dealt with it, we just have to delay the reassembly until right part comes in. Ok we would typically replace damaged oil seals, CV boots during the job as shafts are out so it makes good sense not to be paying labour twice, it's an interesting business model, tough work on the floor
Kevin, what kind of cordless impact wrench are you using? I have never seen in your videos how you use a gas burner and an extruder for broken pins, do you always unscrew everything easily or do you not tackle very old cars? How do you recharge the batteries for your tools if they run out during operation? Why you don't use a jack to install the gearboxes? Thanks for your videos, you are doing an excellent job.
I never use heat. Lots of wd40. Once the rust breaks off you’re home free. But slowly tighten and loosen I don’t need to recharge. I’m under there for no more than 3-5hrs. Maybe one day I’ll use a jack. For now I’m ok.
I believe this is the one of the most difficult clutch and dual mass wheel replacement. You need to dismantle half of the car to get access to the clutch plate. Well done Kevin. Love your videos!
The icing on the cake was how you rolled that gear box onto your self & slipped it into position was amazing.
bet this guy could wallpaper his hallway through his letterbox
😂😂😂😂
😁🍻🍻🍻
Funny, and I bet he could
I just can't believe you drop the whole engine like that in the driveway, truly amazing! Plus I'll never understand how you get the whole damn thing back together again afterwards, that's the real magic...
engine stays in place ..gearbox comes out .
The engine didn't come out?
I’d have more parts left over than first started 😩
Superb work. Your camera work is brilliant too, shows all the detail. Top class mechanic.
amazing work ethic this is the kinda people kids should be aspiring after not tictok/ Instagram people. Rain,snow or sun gets his job done.
Full of admiration for this young mans skills , and on someone's driveway not in a comfy garage.
This man works through wind and respect again!
"If he keeps you talking too much then talk about football and he'll disappear" 😂😂😂 Classic!
Hi Kevin, I heard your customer comment about Skoda in New Zealand. I live there and two years ago (Xmas) we bought an RS245 Wagon over a VW. The simple truth. All the same tech as VW & Audi for a 1/3 of the price. I stumbled across your channel as i was looking for someone who's replaced rotors and brakes on a VAG car. I need to admit, you're very exceptional at your job Kevin; you make it look so easy - clearly it's not. I wish you all the best health and a long career chief.
Rhys that’s awesome. The customer works lives in NZ. And you’ve confirmed what he was saying.
Thanks for the feedback
Kind regards
The best mechanic in UK !
Thanks for sharing !
Respect king Kevin !
Have a good day king !
I agree, and ultra reliable too
I did the clutch on my 1990 Volvo on my driveway after watching a Chrisfix and reading how to in my Haynes manual. Before that I hadn't done any mechanical jobs other than oil change. Wasn't very fun at times and took about 3 days but the satisfaction was well worth it in the end. Keep up the good work 💪
That’s it. The main thing is you got it done.
Can we just state the fact that his second name has to be Arnold. Guy hand lifts a gearbox with nearly no room under the car.
His second name is Albert not Arnold ya donk😂😂🇮🇪
This guy is an absolute soldier!
I done clutch repairs for my first year as a mobile Mechanic but I had to quit. Back breaking work. I only do the light repairs now.
I was just watching your channel over the weekend. All the services., good set up. Where about’s are you.
@@WMCS I'm near Luton airport but in the middle of moving to Biggleswade at the moment
I'm right with you bro!! The work he does, and the level of professionalism he does it with, is NOT for the average person OR skilled mechanic! As I said before, he is in a class by himself!!
This is my 3rd 2.0tdi video I've watched of yours.. You've tought me well. My clutch comes tomorrow 😝👍
Like a virgin, cluched for the very first time!!
😁🍻🍻 I’m sure it’ll go down well. Let us know how you get on.
@@WMCS I've bought a rear main seal too, my cars mk2 seat leon 135k, when the flywheel is off, can I change it there and then? I'm not 100%
Much appreciated!
Not sure whether your mechanical aptitude or work ethic is more impressive. Qualities that seem in short supply these days. Not extinct, but increasingly rare. Full respect 👍
Пацан на коленках работает лучше чем российские "мастера" у официалов с тысячей разного инструмента и подъемником))
Need to do this job on my wife’s car. Your video is definitely saving me a lot of heartache thankyou good sir!
Just bought an Octavia 1.8 TSi, so watched this to see just how much could be involved in changing the clutch. I’m debating doing this job myself, and I have a ramp!!! You did this on the floor!! That’s hard core! Ha! Nicely done!!
Bro, you are definitely in a class by yourself!! I have NEVER in my life seen such detailed work! One day we have definitely got to meet!!
Hey Tim.., thanks so much for the feedback.,, you’re one of my heroes. So that’ll be a dream to meet up one day.
I’m still a big fan of your videos. I was actually just watching the detailed tour of your mobile workshop just last evening.
@@WMCS I REALLY appreciate that bro, but TRUST ME, the hero here is YOU. If you ever call our shop for a price on ANYTHING that has to do with a clutch or transmission, they will tell you we don't do anything that has to do with them. So to watch you do what you do, ON THE GROUND, is PHENOMINAL!!!
It can be difficult enough sometimes even on a ramp..respect to you sit..
Respect young man. You have a great work ethic.
Being able to comfortably replace clutches of various models at people's homes is a skill most of us have not seen anywhere else - bravo!
Kevin-Albert, what would you say are the manufacturers you enjoy working on the most, or could you name a few you find the easiest to work on?
Kudos to you for the great work you do and outside that is incredible, hopefully your channel grows and give you extra help with whatever you wish
Amazing !!!
I watched few of your videos and am wondering, how come someone out there did NOT offer you a great job and pay that you could not refuse, you're one of the best out there.
Ed China has nothing on you, nothing.
I left quite a prestige dealership to do this. I like it. Might get a garage soon.
Thanks for supporting he channel really appreciate it.
@@WMCS Do you even read the manual(s)? How did you learn how to those ultra complex repairs?
Glad to see the snow and ice has gone for you hope you have a good summer and some nice weather you deserve it love you're vids you are a man at the top of your game
As an American, I can only assume this is what the Brits would call a "top bloke".
😁🍻.,, that’s the one. You’ve got the accent too. 🥇
I say it all the time the mans got the skills and a bionic chest keep lifting those gearbox’s in and out. Fantastic work and love how you still make the time to do the videos for everyone to watch👍👍👍
Detail to the max extraordinary achievement mate.
Bloody hell Kevin, the love you are getting !!
I have had the privilege of watching the master at work - fantastic.
That’s it Paul. Just a humble mechanic.
Thanks for the work. Much appreciated.
Thank you, managed to diagnose my issues using your teardown process!
Christ alive Kev thats hard work.. in winter.. on the floor.. just great.. I did my nissan pathfinder clutch and drive plate on the floor in the summer last year... hardest job I've done.. certainly as hard as an engine replacement if you replace the clutch on axle stands..
If I made a video of changing out a wheel bearing I'd be on week three by now.
I was gonna call this guy his reputation is phenomenal.
I hope you go from strength to strength dude.
Thanks Gary. Appreciate the word of support
Bonjour a toi William je te tire mon chapeau car je le faisais il y a longtemps le plus dur c'est de prendre la boîte de vitesse sur toi et de la remettre très bon travail continue a +
Merci beaucoup
My utmost respect for your great work, mate!
One of the best car video I have ever seen. Brilliant
i do this stuff for years, but what the hell is wrong with you...?
last six hours i watch your videos...
good and quality work dude
Utterly unbelievable. My salutation and deep respect to you.
After having watched several of these tutorials of how to change the clutch on VW and Skoda models, I think I will have a go at the clutch of my 2003 Skoda Fabia this summer. Just for the fun of it. It does not seem to difficult at least when William does it. I am not shure though, if I will replace the flywheel, since i is a fairly expensive part.
Fascinating watching a true master at work.
Thanks Alan.
Before I watch this video, I'll just comment...
I followed your videos on the Insignia and the Astra (I have the 13 plate SRI Insignia) to help me to do the job myself, because I was well outside of your coverage area. I purchased the Sachs clutch kit (including DMF and new CSC), purchased all of the tools necessary and I followed everything you did on those jobs.
The end result?
SUCCESS! And I can't thank you enough again for your videos. You inspired me and gave me the confidence to do it myself and it was a 110% success. Of course, the job took me 10 hours opposed to - how long does it take you? 4 or 5?
The DMF was battered and needed grinding off, the pressure plate bolts were rounding off and I had to find equivalents to replace (could hardly get them off without drastic measures) and every step of the way seemed to throw something new at me - really gave me a challenge.
I'm now all beat up from doing it - especially my right hand from trying to get to that evil bolt on the back of the starter motor - you know the one?
How do you do this every day? Are you a machine? Big kudos to you.
Lee what a day you’ve had by the sound of it. Firstly., the main thing is you got it done 🍻🍻
Now that is a baptism of fire on your first one you get the flywheel spin. And you managed that. And secondly yes. That infamous starter bolt.
Hats off to you and really glad to hear the video came in handy.
It’s not the easiest job these insignia. Box a bit heavy as well.
@@WMCS You're not kidding about the box weight. I am a body builder and still struggled to wiggle that lump onto the engine. The job was fraught with obstacles, the flywheel being the worst of them all.
I could have paid for someone to do it, but I am never one to say "no" to a challenge. I have a great appreciation for what you do. You make it look easy :)
Brilliant work, I wish I had the patience and dexterity to do that kind of job on the drive.
Incidentally that was a very clean engine bay for a 12 year old diesel..
That swivel socket is well handy. Gonna get one of those....
Maestro Sir Kevin..............I just cannot get enough of your style ,...............er where did that part go ? you know Sir and you mend fix replace. faultlessly ! If I leaved back in Slough Id be ya wingman ! That's just it YOU DO IT ALL ON YOUR OWN, i sign so impressed, Ill be back. I handled a gearbox into a mitsi legnum 4wd v6, what a mission and ya pick up like the weigh nothing, AND YOU EDIT AS WELL , what more can I say, thank you Sir for ya time
Heavy ain’t they those box
@@WMCS yes they are !, I jacked it up bit by bit, then the transfer case I,d say 60 kg = 130 lbs at a minimum, you make it look so easy !
اكمل العمل مع الحساب وشكر مسبق على كل الفيديوهات التي فيها معظم السيارات وكيفية التفكيك والتغيير.
Like Chris Fix, but without the annoying commentary...
Lol
I figured I found all the interesting car/mechanic geared youtube channels. CarWizard, Hoovies Garage, Precision Transmission, LegitStreetCars, Garage54, Velocity Garage, Torque Test Channel, Tatro Machine, and restore it. Always a pleasure having the RUclips algorithm gods bless my feed with new automotive geared channels and this channel certainly fits my viewing needs perfectly.
Like ChrisFix but this guy is an actual real mechanic
@@jimmyvaught try western truck and tractor. That guy is a brilliant heavy diesel mechanic and is a really decent, hardworking and humorous guy.
How is the commentary annoying on Chris fix it’s super helpful but equally this is brilliant in its own right
Thats a good days graft in a heated workshop with a ramp. & with out having all the camera set up.
You must have a few customers watching out the window in disbelief as you disassemble their pride & joy.
Your attention to detail is dyeing skill.
Just started to watch your channel I cant understand why I enjoy it so much. Good work 💪
Thanks for the feedback
I love to see how organized you are.I much is a clutch on a Fiat 500 1.4 none turbo
Lifting that housing up on your tummy..Legend
That's the way it was done in the old days. Get the gearbox on your chest and bench press it in place. Nice work lad.
The Clutch Ninja strikes again
Your skills are seriously impressive
Don't fear Kev's here
That’s it. No fear
Hi Williams you have a very good and very performing technique, I have admired you for some time, I have seen your centering device for the clutch disc of what material is it made? Thanks for everything you share you are truly a very good professional. A hug from Verona Italy.
Hi Gianni. It’s plastic.
Good job! My friend, besides the fact that you do a good job and that you know how to do your job. Rarely encountered in other youtubers, you also have a special talent to present the work you do! In my opinion, you can easily be a good film director. Again, good job Kevin!
Thanks. It’s not always the easiest with the camera work.
#lifevlogs
Kevin that was absolutely Brilliant, got me popcorn out for this one.👍👌
Thanks Max. It was a nice easy one.
Nice and roomy compared to most cars 👍
I had seen the other video, behind the scenes, and it seemed strange to me that you hadn't shot any video with the skoda, but as always you never disappoint.I hope I am not wrong to write I am not an English language speaker.
Thank you Luca. I understood perfectly what was written.
It looks like you don't have to deal with rustwelded nuts and bolts that often?
Here in Sweden, it's sometimes a nightmare, the only friend being the Induction heater.
Too much grit on the road maybe.
Picked up a Venom II induction heater and it's a game changer.. I find myself using my oxy/acetylene torch less and less.
Jimmy Vaught Ok! Yes, i use the Alesco A80 that has a watercooled probe. I recommend it.
God job ! Professional!
Take care ,gear box is heavy !
Hi. Why do you not use a hose with a bottle to bleed the coupling? Then you don't have to clean everything with brake cleaner afterwards. Greetings from Germany.
That’s an idea. Thanks.
great job Kevin! here in Italy we don't have mechanics who offer a service like yours. You are great!! just one question: what liquid do you use to clean the flywheel?
Hello from Italy!
Great one! It seems that the left axle shaft was changed. And for sure it needs new brake discs. It is strange a rusty bolt in the battery base. Too much condensation, maybe. Thanks a lot for the video!
It’d been parked up for a while. That bolt I had to use the bolt extractor to get it out. As the head was rusted out
Pretty much every car I've owned has had one rusty bolt in the battery box. I'm pretty sure they design them that way out of spite.
skillful work
Hold on, hold on! We didn't see if it worked! ;)
Just kidding - great job!
You turned me on to Akira the don ! For which I am thankful. Cheers J
That’s it. Throw in a little bit of Terence McKenna and follow the path. 🍄
I'd love for you to do a Q and A or a live stream here some day so we can all officially meet you. :) Great channel and work brother.
These videos humble my ass in my shop lol keep up the great hard work brother! Stay safe and much love from Northern California! 🤙🏽🤙🏽🤙🏽
Thanks Andy. .,, really appreciate the support. Hope you’re keeping busy your end. 🍻
@@WMCS you need to do a Subscriber mile marker special where you fly out to the states and change a clutch on an American muscle car
The amount of corrosion on such a new car is surprising, I wonder if you could use hammer right or something similar to protect it , since it’s open to the elements
great work, but the bleeding schocked me there. Brake fluid squirting on the paint will leave marks
great work again Kevin . love your videos
Still can’t believe how much of a machine you are.
Northernman ., it’s all in a day’s work.., just getting on with the task at hand.
Hope you’re doing great your end. 🍻🍻
Awesome work, can i ask did this car have a clutch judder? It would be amazing if you could mention the fault, i may have the same on mine unfortunately
Great video, what you got in your spray bottle that you're washing down with at 26:00 mins?
It’s brake cleaner. But any solvent works just as good
Had these guys do a clutch for me a while ago, great service at a great price, they are truly magicians at what they do from the quote, to getting the job done, a superb company team effort
Thanks for the feedback Ray. What car was it.
@@WMCS it’s was a Ford Fiesta zetec s 2012
How much
Vraiment du super travaillé respect ✊
Great vid.. Just wondering what brand impact extentions and sockets you use... I've been through quite a few cheap chinese ones they round pretty quick...
I’ve had them for 7 years. They are sealey Pro.
@@WMCS thanks mate keep up the hard but honest work 👍
I spent 45 minutes changing the oil in my GLK350 and swear I won't do it again. How the hell can you do that all by yourself?
BRAVO KEVIN
moi je dit chapeau travaillier dehors quant il fait froid !!! aimerai avoir des mecanos comme sa en france bravo a toi en plus c est tres bien filmer
Merci beaucoup Rene..
@@WMCS fait du beau boulot bravo
Getting the box under there, yes that's old school style.
I'm interested, how do you handle wrong parts/ damaged Cv boot etc that are only discovered mid job?
I order parts myself. So it won’t be wrong.
Nothing gets damaged.
Anything I find I report to customer., to take to their local garage.
I have one job. And one job only. To replace a clutch.
@@WMCS I find even when we order the parts they are often wrong, especially from euro parts so was curious how you dealt with it, we just have to delay the reassembly until right part comes in.
Ok we would typically replace damaged oil seals, CV boots during the job as shafts are out so it makes good sense not to be paying labour twice, it's an interesting business model, tough work on the floor
all that to change a clutch todays cars are a joke well done top man
Thanks, just what I needed. Perfect
Least favourite fastener type
a) Torx
b) Inverted torx
c) cap head hex
d) The one that wont shift right now.
Hope you manage that last one ok. They’re not too popular here too. 😆
I'm a mechanic and i get tired just from watching how you have to work.
Excellent
KEVIN super mechanic 1!!! Hello Maroš Slovakia.
Any chance you could put links in on the tools you use please especially the universal socket. 👍🏼 top work again bud.
Great stuff bruv hats off to ya gonna 💯 recommend you around if anybody needs work 💯👍
hi why did you need to use the spray bottle to clean the engine side,and what did you spray?,thanks!
15:12 That Sulfuric Acid makes holes in cotton clothes very nice. - If somebody wonders why always after that there appear holes in your jeans.
You are awesome!!!
T'ai le meilleur en mécanique bravo
Merci
Kevin, what kind of cordless impact wrench are you using? I have never seen in your videos how you use a gas burner and an extruder for broken pins, do you always unscrew everything easily or do you not tackle very old cars? How do you recharge the batteries for your tools if they run out during operation? Why you don't use a jack to install the gearboxes? Thanks for your videos, you are doing an excellent job.
I never use heat. Lots of wd40. Once the rust breaks off you’re home free. But slowly tighten and loosen
I don’t need to recharge. I’m under there for no more than 3-5hrs.
Maybe one day I’ll use a jack. For now I’m ok.
Hello my friend. How are you ??? I like your job....you are the great, the best
Thank you gregos. Hope you are keeping well. And enjoying the sunshine.
I used to hate doing shit like this in the garage.
Whereabouts are you mate in the country?
Leon. I cover about 80 miles from the tiny town of Bedfordshire.
Hi, is the slave cylinder the same on a 2013 Octavia 2.0 diesel, engine code CFHC or is it the external type?
Regards, Steve.
bravo super boulot aimerai avoir un mecano comme sa en france et plus super fimer baucoup courage de travaillier dehors par tout les tempts !!