If your talkin about the Street Fire Ignition, you should be okay with your 440hp 454 Chevelle. If this is mainly a street car, I would recommend the Street-Fire ignition. If you planning more for a street/strip with future upgrades, i would look into our 6AL-2 Programmable box, PN 6530 or PN 6421, the non-programmable box.
@kreigsmann A capacitive discharge ignition box like the 6a would do wonders for all around performance of your engine. Inside the ignition box, is basically a transformer that steps up the voltage big time. Note the comparison of stock and MSD ignitions. The multiple sparks per combustion cycle take place up to 3000 rpm, so all the more reason to add more firepower to the plugs. Installation of CDI will increase engine efficiency. You dont need an MSD distributor to take advantage of an MSD box
@kreigsmann What kind of vehicle do you have? Is it points or electronic ignition? We do offer Ready-to-Run Distributors which have a built-in ignition module so no MSD box is needed. Generally, going from points to an MSD will give you a very noticeable difference. Let us know what kind of vehicle you have and we can go from there. Thanks.
what plug gap do you recommend for an around 500 horse 10.5:1 compression 383 chevy with msd 6al-2. i am using autolite ar133 as recommended by dart for their 200cc 64cc combustion chamber iron eagle application? thanks in advance
im tuning up my car from old worn out OE 7mm wires 20,000V coil and cheap distributor to MSD 8.5 wires blaster coil and ACDelco plugs and stock distrubutor. is the difference going to be big not having a MSD box and distributor. i dont care about rev limiters or choosing RPM range. and is there a MSD distributor that will fit without having a box?
im not sure its a 4.3 CPI Chevrolet engine. im not sure if it is points. im pretty sure it is electronic because it has plenty of wires going to the distributor. i do not know very much about ignition other than MSD does it best i just need to know more about it. the reason i dont want to have the timing box is because i really never use RPM to my advantage the engine redlines at 5000 rpm i have no need for timing advancing and retarding. that and i dont really want to budget 500+$ for ignition.
I have a 2006 Impala ss and I am installing a cold air intake by K&N, a magnaflow catback, as well as a super chip power programmer. I plan on installing 8 GM LS2/7 Series Coils p/n 82478, with msd Spark Plug Wires p/n 32829, I would like to know how much this will help my build as well as what spark plugs would be best to use.
I want to put a ignition box on my 3 cylinder 1.0 ltr geo metro engine. I already have the blaster coil with stock wires. I tried to put on your streetfire ignition box but it wouldn't work so I got a refund. I have found no clear instructions to install these on any Suzuki vehicle.
thats crazy i gotta pick one of these up for my mustang
If your talkin about the Street Fire Ignition, you should be okay with your 440hp 454 Chevelle. If this is mainly a street car, I would recommend the Street-Fire ignition. If you planning more for a street/strip with future upgrades, i would look into our 6AL-2 Programmable box, PN 6530 or PN 6421, the non-programmable box.
@kreigsmann A capacitive discharge ignition box like the 6a would do wonders for all around performance of your engine. Inside the ignition box, is basically a transformer that steps up the voltage big time. Note the comparison of stock and MSD ignitions. The multiple sparks per combustion cycle take place up to 3000 rpm, so all the more reason to add more firepower to the plugs. Installation of CDI will increase engine efficiency. You dont need an MSD distributor to take advantage of an MSD box
Will a MSD 6A ignition box be hooked up to the stock distributor of an 94 toyota tercel if not can you tell me witch box can be ???
@kreigsmann What kind of vehicle do you have? Is it points or electronic ignition? We do offer Ready-to-Run Distributors which have a built-in ignition module so no MSD box is needed. Generally, going from points to an MSD will give you a very noticeable difference. Let us know what kind of vehicle you have and we can go from there. Thanks.
what plug gap do you recommend for an around 500 horse 10.5:1 compression 383 chevy with msd 6al-2. i am using autolite ar133 as recommended by dart for their 200cc 64cc combustion chamber iron eagle application? thanks in advance
Will the street fire do the same thing as these for my 454 chevelle SS? Its built up putting out about 440hp
im tuning up my car from old worn out OE 7mm wires 20,000V coil and cheap distributor to MSD 8.5 wires blaster coil and ACDelco plugs and stock distrubutor.
is the difference going to be big not having a MSD box and distributor.
i dont care about rev limiters or choosing RPM range.
and is there a MSD distributor that will fit without having a box?
whats the best for a 454 BigBlok Thanks
im not sure its a 4.3 CPI Chevrolet engine.
im not sure if it is points. im pretty sure it is electronic because it has plenty of wires going to the distributor. i do not know very much about ignition other than MSD does it best i just need to know more about it.
the reason i dont want to have the timing box is because i really never use RPM to my advantage the engine redlines at 5000 rpm i have no need for timing advancing and retarding. that and i dont really want to budget 500+$ for ignition.
@joejedlicka Please call our tech line, they are much better prepared to answer your question. Thank you 915-855-7123
WILL THIS WORK FOR ANY CAR?
I have a 2006 Impala ss and I am installing a cold air intake by K&N, a magnaflow catback, as well as a super chip power programmer. I plan on installing 8 GM LS2/7 Series Coils p/n 82478, with msd Spark Plug Wires p/n 32829, I would like to know how much this will help my build as well as what spark plugs would be best to use.
isso é como remédio "PLACEBO" e acho que super centelha na vela só serve para tomar choque em dia de chuva.....KKKKK
after 3000rpms the ignition cycle is so fast there is no time/point for multi spark.
Back when Dave had hair
I want to put a ignition box on my 3 cylinder 1.0 ltr geo metro engine. I already have the blaster coil with stock wires. I tried to put on your streetfire ignition box but it wouldn't work so I got a refund. I have found no clear instructions to install these on any Suzuki vehicle.
Furburger!!!!
Suzuki guy with 3 cyl, they don't make anything for a 2 or 3 cyl engine. Some other guys do, you'll need to surf around.
Sorry that you nice guys are working with junk.