What is the point of sanding the surface? And what happens if you don't sand it? I'll be working on a yeti, and all I'm doing is putting a name on it. I'm not doing full coverage with rhinestones.
They will pop off. Just like if you go to a nail salon and they slightly sand and buff off the shiny layer of the nails. It's for better adhesion. Hope this helps as I see this is a old comment.
I bought a few things from your site and I only saw this video LOL. I love your work and explanation. Im trying to fix a boo boo on an engraved Stanley by applying Rhinestones. We shall see
Hi good and hard job. I feel so intimidated by all the process and I might just skip to the rhinestone part. Can you give advice how to rhinestone only on vinyl without all the sealing and coating of epoxy and even it is possible? And if I buy from AliExpress or eBay will the rhinestone ll be good quality ?
You can lightly sand the vinyl and just glue and place. You want to make sure you somehow seal all the vinyl edges down so it doesn’t lift when it gets in water. Yes Ali express rhinestones/ebay/amazon all work. I have them too in case you can’t find the color you need. Use code RUclips for a discount 😊
Hello, I absolutely love your video...Thank you for telling how much epoxy you use in ml. I also loved how you showed how to correct the mistake with the name and redo it. The close up while adhering the rhinestones were awesome. Along with the technique to wait and wash the rhinestone area with a sponge several days later to ascertain if any of them come off and wash away glue. Do you pat down all of the Rhinestones when you are done. I am going to have this video on while I attempt to epoxy a tumbler and put my name on it. Thank you , again this was awesome.
I only subscribed to your channel last night & I’m already hooked. Your work is fantastic & you explain everything perfectly. I’ve looked for a tumbler cradle, but the ones I’ve found in the uk don’t look as well made. Do you know the make of your cradle? Can’t wait to see your next video xxx
Hi. I use the aluminite brand. I purchased it from Michael’s. I do use two different types. My first coats I use the quick coat because it dries quickly. But I finish it with the clear cast plus because of the uv protection. Keeps it from yellowing
Love this video. Packed with tips, to the point, and covers everything 🤍
This tumbler is beautiful! Where did you the font from? Thanks.
Do you apply resin over the stones???
This was very helpful and thorough instruction. There is a lot of work involved.
What is the point of sanding the surface? And what happens if you don't sand it? I'll be working on a yeti, and all I'm doing is putting a name on it. I'm not doing full coverage with rhinestones.
They will pop off. Just like if you go to a nail salon and they slightly sand and buff off the shiny layer of the nails. It's for better adhesion. Hope this helps as I see this is a old comment.
@@melimel9265
Thank you it helps a lot. Only person who made it make sense to me lol
simply elegant…who knew a bejeweled name could exude such class…thanks for sharing
Thank you! What a beautiful comment 🥰
Nice! What font you use please? ❤
Thank you. It’s magnificent
I bought a few things from your site and I only saw this video LOL. I love your work and explanation. Im trying to fix a boo boo on an engraved Stanley by applying Rhinestones. We shall see
Hi! Thank you!! I hope it works, definitely let me know!!
So very helpful both for stone placement and how you problem solve. Thank you !
You’re welcome ☺️
Hi good and hard job. I feel so intimidated by all the process and I might just skip to the rhinestone part. Can you give advice how to rhinestone only on vinyl without all the sealing and coating of epoxy and even it is possible?
And if I buy from AliExpress or eBay will the rhinestone ll be good quality ?
You can lightly sand the vinyl and just glue and place. You want to make sure you somehow seal all the vinyl edges down so it doesn’t lift when it gets in water. Yes Ali express rhinestones/ebay/amazon all work. I have them too in case you can’t find the color you need. Use code RUclips for a discount 😊
Could you use uv resin instead of glue to apply the rhinestones?
You can. Just want to make sure you only use a bit because you don’t want to see it when it dries
Love this video!! Very informative and very much appreciate the fact you kept your mistake. Looking forward to more videos.
Hello, I absolutely love your video...Thank you for telling how much epoxy you use in ml. I also loved how you showed how to correct the mistake with the name and redo it. The close up while adhering the rhinestones were awesome. Along with the technique to wait and wash the rhinestone area with a sponge several days later to ascertain if any of them come off and wash away glue. Do you pat down all of the Rhinestones when you are done. I am going to have this video on while I attempt to epoxy a tumbler and put my name on it. Thank you , again this was awesome.
Aww thank you! & you’re very welcome ☺️ yes pat down the rhinestones after you wash. I would love to see your finished tumbler, make sure to share:)
I only subscribed to your channel last night & I’m already hooked. Your work is fantastic & you explain everything perfectly.
I’ve looked for a tumbler cradle, but the ones I’ve found in the uk don’t look as well made. Do you know the make of your cradle?
Can’t wait to see your next video xxx
Aww thank you 🥰. That makes me happy to hear!! The cradle is from Amazon, not sure off hand of the vendor.
Absolutely Beautiful!
Thank you 😊
Thank you. it’s beautiful. Where can we find that pretty pink glitter?
Thank you. This glitter is called Aurora and is available on my website 😊 Www.allthingsallhappy.com
Lmk if you have any issues trying to find it.
i love your video! can you tell me the name of the pink block you used to scuff it up?
I don’t know the name of it. I purchased it on amazon in a 50 piece pack.
Beautiful. Do you happen to know what font you used and where you got it from? The name is just beautiful.
Thank you 😊 the font is magnificent. I honestly don’t remember where I got it. I’ve had it for so many years.
@@allthingsallhappy Thanks. I'll have to look around.
I love this! I haven't tried crystals yet but they are so pretty. You don't have to epoxy around the stones?
No epoxy on the stones. Makes them dull 😊
Love it that actually is my name 💕👍
Hi, I have enjoyed your video and subscribed. I am a new learn and excited, how do I start and where do I get the materials? Please help,me
that is beautifully done. did you have to add a clear coat or modge poge over the rhinestones when you where done.
Thank you 😊 No clear coat or mod podge needed. Just the glue to hold down the rhinestone.
Loved the tumbler. What font did you use?
Thank you. I used magnificent font
What beautiful work you do. Do you sell your works of Art?
Thank you 🤗 Most of the items I make are for friends and family. I will definitely begin selling some of the items as I make them :)
I love this tumbler!! My name is Angelina 🥰!! Do you know someone with this name!! Great tutorial, well explained!
Thank you so much! My daughters name is Angelina too. So excited that she finally wanted me to make her a tumbler 🤗
What is that font....I an new to all this. I love just a little bling.. hugs Sheryl 💙🎨💙
A little bling never hurt nobody 😊 font is magnificent
Hi! Could you make this available on your site to buy? I love the baby pink color💖
Hi! It’s available. It’s called Aurora. Part of the Princess collection :)
@@allthingsallhappy I’m sorry I meant the tumbler..do you sell tumblers?
Love this video. I just subscribed. How long did it take to make the tumbler? Do you charge by the hour or the just a set price for the tumbler.
It took a couple of days. Usually you would just set a price for the tumbler.
I've never used epoxy resin before. What kind of epoxy resin did you use and where did you purchase? Also, did you use two types of epoxy resin?
Hi. I use the aluminite brand. I purchased it from Michael’s. I do use two different types. My first coats I use the quick coat because it dries quickly. But I finish it with the clear cast plus because of the uv protection. Keeps it from yellowing
What’s the name of the fond I love it
What is the machine that spins the cups around ?
Where did you get tumbler cradle?
What was the font did you use
Magnificent
Just subscribed ❤
I hope you enjoy the videos :)
Where do u get ur stones and do u know the font name? Thanks
I sell the rhinestones. You can check out my website www.allthingsallhappy.com
Lmk if you have any questions on what you’re looking for.
The font is magnificent:)
So you don’t epoxy the whole thing again after adding rhinestones?
No, do not epoxy after laying the stones
Had a double take when I saw my name in the thumbnail 😆