11:42 From my experience transparent resin is MUCH harder to print than opaque. Have it cure for an extra second each layer, *and* make sure the resin is warm, its very temperature sensitive. Oh also if you havnt heard of UV Tools, try that, at least to analyze the print file. I havnt exactly watched a resin printer with the top off much but at 9:27 the resin looks very viscous which is not what you want. You can buy a brewery band and wrap it around the vat to keep it warm. But since its such a small printer I might just go the route of leaving the resin in some warm water for a while before putting it in the vat then printing.
If it's the same standard fast resin as the opaque, an extra second is completely unnecessary and will just cause other issues and loss of details. I print in both clear and opaque and have never once had to increase the exposure time. There's a variety of other issues that are likely the cause.
Okay first off, the way you can keep coming up with new stuff that pushes YOUR OWN skill level while being creative and entertaining to us? Top notch. It's what keeps me coming back the moment I catch an upload. Second off, I'll be editing this comment as I watch with timestamps. lol 2:35 10 MONTHS? OUO; 3:25 The green screen pointing is slaying me XD 5:55 The air that escaped my lungs with that pronunciation, I demand it back- 10:46 Magikarp was my first thought. lol
For printing clear resin prints like Gengar, it may be worth trying to print it solid. Yes, it'll be a hekken chonker, but the effect is better imo. When I'm having issues with my resin printer, it's usually because the room is too cold. The trick I found (other than buy a $200 tiny heater from Anycubic or Elegoo) is to buy a fermenting belt as well as a temperature regulator, like ones for reptile habitats. It keeps it at 75- 80 F and you can adjust what you want the temps to be. It also keeps from accidently burning things down since once it gets hot enough, it will stop sending power to the heater. Once it drops low enough, it will send power again.
I tried printing solid, but parts of the print would just not appear (see 9:44). You might be onto something with the temperature though since the winter weather hit just as I started printing in resin.
As @Ghostion11 said, an arctozolt ice cream maker would be AWESOME!!! One of the pokemon tied for first place on my list of favorite pokemon is arctozolt.
Ugh I need to buy an FDM printer already, so many additional options that aren't suited to resin printing. Also, not sure I would trust that carbon filter as your sole filtration system. Granted it's a tiny printer and it's not producing a ton of fumes, but I would still ventilate the room, air it out a window or something. Since you're beginning to dabble in resin might be worth investing in an air quality monitor. As for why that Gengar failed, I would need more info to diagnose it but there's a TON of reasons why this could be the case. I've been meaning to do a video on all the reasons, I need to get back to posting lol. Here's the 16 I wrote out for that script: 1. Insufficient Supports (islands) 2. Bad model orientation 3. Bad exposure times 4. Light-off delay too short 5. Too slow/fast lift speeds 6. Model not optimal for 3D print 7. Print is too large/solid for your printer to handle 8. Corrupted Slicer file or flashdrive 9. Resin unmixed 10. Cured resin bits 11. Cold Room/resin Temp 12. Build plate not properly leveled 13. Build plate too smooth 14. FEP too loose/damaged 15. Bad LCD screen (leaked resin) 16. Stepper motor struggling Feel free to reach out on Discord if you need some help!
I've only ever used gray but I've heard clear resin is a real pain to print with so that might be part of your problem. Try using regular resin on the same printer and see what happens. It might help narrow down the issue.
idea make it bigger like way bigger so u can have it fully auto and maybe make the resign printer on the bottom one or hey even make it big enough to fit a normal one then make it like a hand that brings it up to the top and make it where it opens up like the one in game so yeah
I'm only 3 minutes in, so sorry if it's addressed later on, but the way you say Isopropyl alcohol hurts my soul every time you say it. It's not Icy to dull the pain, it's Iso sorry for that awful wordplay. (For the record, I don't actually care that much, but I like to find excuses to comment on videos I want to support, because I know RUclips likes that)
Ah. Just found out RUclips turned on automatic dubbing by default for all channels. I just turned it off. I bet most creators don't even realize it's turned on in the first place.
Im proud of you, Son.
But it was all a dream
@@raidenstonehouse4000 but the fact that it was a dream was a nightmare
11:42 From my experience transparent resin is MUCH harder to print than opaque. Have it cure for an extra second each layer, *and* make sure the resin is warm, its very temperature sensitive.
Oh also if you havnt heard of UV Tools, try that, at least to analyze the print file.
I havnt exactly watched a resin printer with the top off much but at 9:27 the resin looks very viscous which is not what you want. You can buy a brewery band and wrap it around the vat to keep it warm. But since its such a small printer I might just go the route of leaving the resin in some warm water for a while before putting it in the vat then printing.
If it's the same standard fast resin as the opaque, an extra second is completely unnecessary and will just cause other issues and loss of details. I print in both clear and opaque and have never once had to increase the exposure time. There's a variety of other issues that are likely the cause.
Okay first off, the way you can keep coming up with new stuff that pushes YOUR OWN skill level while being creative and entertaining to us? Top notch. It's what keeps me coming back the moment I catch an upload.
Second off, I'll be editing this comment as I watch with timestamps. lol
2:35 10 MONTHS? OUO;
3:25 The green screen pointing is slaying me XD
5:55 The air that escaped my lungs with that pronunciation, I demand it back-
10:46 Magikarp was my first thought. lol
10:40 mine was Snom.
@@Qualman701same
8:13 DougDoug MugMug Jumpscare
I was literaly coming down here to comment that.
The Delibird cosplay alone deserves a like on the video.
mr volt jumpscare was incredible. pleasent surprise as he's the guy that got me into this side of youtube. sick project as always btw !!!!
🤘
For printing clear resin prints like Gengar, it may be worth trying to print it solid. Yes, it'll be a hekken chonker, but the effect is better imo. When I'm having issues with my resin printer, it's usually because the room is too cold. The trick I found (other than buy a $200 tiny heater from Anycubic or Elegoo) is to buy a fermenting belt as well as a temperature regulator, like ones for reptile habitats. It keeps it at 75- 80 F and you can adjust what you want the temps to be. It also keeps from accidently burning things down since once it gets hot enough, it will stop sending power to the heater. Once it drops low enough, it will send power again.
I tried printing solid, but parts of the print would just not appear (see 9:44). You might be onto something with the temperature though since the winter weather hit just as I started printing in resin.
How is this the most unhinged video you've made and you didn't make a single BALLS joke??
I don’t care for the in built camera footage… seeing it grow with your own camera set up was cool.
Your videos are so fun to watch, though I do kinda miss your smaller and simpler builds. I think a mawile nutcracker would be perfect
As @Ghostion11 said, an arctozolt ice cream maker would be AWESOME!!! One of the pokemon tied for first place on my list of favorite pokemon is arctozolt.
11:16 Rivalry Delibird?
Funny, but would've been better if delibird could actually have rivalry as an ability
1:16 based Harry
This is very cool. Can you make a teraform zero terapagos with holographic fans if possible. Or a arctozolt ice cream maker
OMG
THAT'S A GOOD IDEA
6:45 double dipping on magnets this video, nice
But can that 3d printer printed by a 3d printer print another 3d printer?
On a other 3d printer
Theoretically
yep! theres a guy who made one
i forgot his name but he made a 3d printer that canprint 3d printers that can 3d print 3d printers and so on
Ugh I need to buy an FDM printer already, so many additional options that aren't suited to resin printing. Also, not sure I would trust that carbon filter as your sole filtration system. Granted it's a tiny printer and it's not producing a ton of fumes, but I would still ventilate the room, air it out a window or something. Since you're beginning to dabble in resin might be worth investing in an air quality monitor.
As for why that Gengar failed, I would need more info to diagnose it but there's a TON of reasons why this could be the case. I've been meaning to do a video on all the reasons, I need to get back to posting lol. Here's the 16 I wrote out for that script:
1. Insufficient Supports (islands)
2. Bad model orientation
3. Bad exposure times
4. Light-off delay too short
5. Too slow/fast lift speeds
6. Model not optimal for 3D print
7. Print is too large/solid for your printer to handle
8. Corrupted Slicer file or flashdrive
9. Resin unmixed
10. Cured resin bits
11. Cold Room/resin Temp
12. Build plate not properly leveled
13. Build plate too smooth
14. FEP too loose/damaged
15. Bad LCD screen (leaked resin)
16. Stepper motor struggling
Feel free to reach out on Discord if you need some help!
I have a tier list of my suspects. Would definitely hit you up sometime soon if you have the time!
8:14 i love how often you include the nug mug
This is so awesome, i love the commentary style 😂😂😂, so meme worthy 🎉🎉. I've been watching for almost a few years but never subscribed until now.
The Wolfey pointing pose refference is on point lmao. Nice print dude
Boy, This thing looks so real! The little things look like little figures.
It's always the Gengar projects that gets Haunted 😂
'The power of science is stunning!'
Dude this is awesome
I've only ever used gray but I've heard clear resin is a real pain to print with so that might be part of your problem. Try using regular resin on the same printer and see what happens. It might help narrow down the issue.
Can you make a terapagos that can turn back into its dormant form please
Clawitzer water gun
Fantastic video and good aim!
Dont think i didnt catch you slipping in that DougDoug MugMug. Nice.
Can you make a Furret Rc car?
Dunno man, think the printers toast, guess you'll just have to keep having me print stuff for you...
Damn you right.
BigRig never 3D printed that Delibird mask, he skinned one alive and made the mask afterwards to cover up his crimes.
yay 100th like. also ngl the bottom of the item printer looks like furnace :)
I think the universe learnt you weren’t paying harry anymore and stopped you
My god,he finally has a resin printer
I just want to say well done and keep up the work p.s your great
idea make it bigger like way bigger so u can have it fully auto and maybe make the resign printer on the bottom one or hey even make it big enough to fit a normal one then make it like a hand that brings it up to the top and make it where it opens up like the one in game so yeah
I just max out this printer in-game
5:55 NOC TUAH, HAWK TUAH !!!!
Vanilluxe ice cream maker now (pls)
Yo can we please get a Mega Camerupt Roomba
How bout cramorant thing from the isle of armour?
when you added the homemade camera holder i was like "oh, oh, he's finally using magnets!" irl
Awesome🗿👍
Nice, very nice!
VOLTZ MENTIONED
finally downloading toys off the internet!!
Do you an an engineering degree or something because everything you make is so complex and amazingly detailed
Comp Sci, so I'm self taught! Most of the things I do are doable with enough time and drive.
Cram-o-matic next?
Sick!
A Musharna levitating humidifier?
8:15 DOUGDOUG MUGMUG!
Have you ever thought of doing a collab with jlaser
Delibird doesn’t respect women that was just the versions of present that don’t cause as much damage or heal the opponent.
You sound congested, you good?
Amazing video btw!
I tried some new EQ vocal filters. Definitely makes me sound like I have a cold.
@@BigRigCreates Oh ok!
I challenge you to make a functional Meraidon motorcycle.
Toyota beat me to the punch. And I don't have Toyota money.
Please make Necrozma Night Light or an Applin Project, PLZ!!! 🙏 🙏 🙏
that beetlejuice voice!
They had that in the dlc of sword and shield
Yippee
New video
DOUG DOUG MUG MUG
i never was this early
you 3d printed a 3d printer
MUG MUG
wewt
Under 1 day gang?
First 5k
I'm only 3 minutes in, so sorry if it's addressed later on, but the way you say Isopropyl alcohol hurts my soul every time you say it. It's not Icy to dull the pain, it's Iso sorry for that awful wordplay.
(For the record, I don't actually care that much, but I like to find excuses to comment on videos I want to support, because I know RUclips likes that)
No this is valid. My dad literally texted me the same thing a few minutes ago. 💀
Make it bigger get rid of that garbage mini printer.
First
Nuh uh @kingdrew8888 was first
197 likes in 42 mins bro fell off
Each time a creator chooses to force a crappy ai translation on me, he gets both a downvote and an unsubscribe if I was subscribed to him.
Sorry I’m confused here, where was there an AI translation?
Ah. Just found out RUclips turned on automatic dubbing by default for all channels. I just turned it off. I bet most creators don't even realize it's turned on in the first place.
@@BigRigCreates It's my turn to apologise, I thought it was a choice on your side. Thumb up and subscribed again then (sorry again).