From, this channel's own description: "My models of Perpetual Motion Machines are of motorized versions that were built to illustrate how they were supposed to work in the minds of Inventors."
Actually it's because of comments like these. This guy flat out admits these are motorized models for demonstration. If people in his comments learned how to read, you would know this by now.
Many people are simply incapable of appreciating science or the aim of perfection. Of course there is no true perpetual motion machineries, but there is "highly efficient" machine that conserve so many of it motion energy that it is almost perpetually moving. It is the effort on aiming on that perfection as always admirable.
The weights are free to swing and so the center of gravity of each will fall directly below the pin. So in the end the wheel will be in balance and not move.
My best initial modification for this wheel with periodic toggling weights is to use a sideways lever in place of one of each of the pairs of dangling weights. This way at least you could apply pressure from outside to the lever and perhaps create imbalance. Maybe having sliding weights like beads on the levers that are tethered outside to one side of the device would work. I believe this normally wouldn't work due to the need to pull past the midpoint of the wheel, but perhaps someone could modify my variation on the design. A possibly important modification is to use heavy tethered rope as a way of pulling the weighted beads. A further modification is using a weight attached to the rope mostly near the tethered point outside the wheel, which may cause the uppermost bead on the levers on the wheel to move outwards, with little effect on any of the other beads (although there would be one rope for each bead. The beads might be designed to slide towards the tethers in every other position.
This and all other ideas for a perpetual motion machine will not work due to physics. The weights shift the center of mass of the system downward. In actuality the wheel will just bob back and forward a little before it loses to friction. Its not possible to make a true perpetual motion machine. There is a hidden motor in the machine, there always is.
You illustrate what the inventor had in mind when they conceived the device, not something which actually works. Unfortunately, some people seem to think it actually works, because they attempt to build them. Your wheel turns as fast as you spin it.
An overbalanced wheel would start rotation by itself without being pushed .It would reach a point of equalibrium and find a rest position unless it could reset its unbalanced state some how.
Please make a free energy machine out of this idea. You can make a lot of money. I will be the first to buy. This world was waiting for your kind of genius so far.
look at the about page of this channel, they are motorised versions to demonstrate what the inventor wanted them to do, they state in their about page that none of these machines are real
Why u not try to replace bottom plate with acrylic and show us theres no wire attach it for all your project?..maybe it will be different comments.keep a good work.
@@veproject1 You are supposed to tell how it worked. Or else, there's no use... Also I think there cannot be a self perpetual machine that can be operated in this Universe. Please stick with the laws of Physics.
Siempre necesita ese empuje primario y se necesitaría verlo por mas tiempo para saber si no se detiene. Se debe recordar que la idea principal de crear una maquina con movimiento perpetuo es generar energía infinita o al menos por años o siglos.
An overbalanced wheel comes from Leo Vinci and not Leo Messi. Only thing is how low is your friction to counterweight to work. Yes eventually it will stop is a most practical sense and Ideally it won't.
@veproject1 You are supposed to tell how it worked. Or else, there's no use... Also I think there cannot be a self perpetual machine that can be operated in this Universe. Please stick with the laws of Physics.
I invented a perpetual motionless machine. I believe it will revolutionize the state of stationaryness. I just need a few million $ from fellow true visionaries to help me bring it to the world.
Кронштейны-оси грузиков симметричны на колесе, значит бесконечного движения не будет, какие бы иллюзорные формы составного груза не были, вводящие в заблуждение на взгляд. Хотя несведущим может показаться - О ! Очередное чудо !
@@veproject1 то есть, чудесным образом создали иллюзию из двух связанных жёстко грузиков: например, из стального и пенопластового. Да хоть из чего. Главное, что их общий центр тяжести каждого составного груза проходит через вертикаль к своей опорной оси, а оси расположенны симметрично на колесе. ... По этому обстоятельству дисбаланса вращающих моментов у колес нет - нет и вращения. А движется от начального толчка, но трение в узлах механизма остановит его.
Simple. If it had to be spun by hand, it's a scam. The whole point of perpetual motion is it generates enough or greater power than it needs to stayin motion. Imparting energy by spinning it by hand voids the principle
Not correct. Every block of blue weight together with steel weight, compose a unique piece, disregarding the distance or angle between them. So, the weight is compensated everytime at each side of the wheel. But I enjoy this channel because it is inspiring and challenging for mind.
Not possible. The point of attachment of the weight to the wheel is where the force is applied by the weights. There is a motor driving the wheel. Busted!!
Gravity cannot be infinitely looped with this device because gravity chooses to pull the heavy side of the weights attached to 2 ends. And when the heavy side comes down, the system locks.
VEPROJECT1 I love your work.. There is a light at the end of the tunnel, I really appreciate and respect all your efforts... Here is my two cents, from a 63 yrs old... Perpetual Motion is totally real, I have NO DOUBT!!! but since we born, we trained the most intelligent mind to really believed in those OLD Rules of Thermodynamics and all that BS that keep the Status Quo... which really blocked the human desire to discover new venues, new routes, new approaches... to never engage in new ways, not possible in past years but maybe possible at this time... Just because our society doesn't fully attacked the development of perpetual motion machinery, it doesn't mean that Perpetual Motion is not possible. Ask yourself... Why all the sharp minds keep trying??? If you think because they are stupid, then look yourself in the mirror... Perpetual Motion will be accomplished when a collectively open minds group of people get together with the same goal in Mind. It's not going to be easy, but not impossible... Gravity is the key, and it will never stop working for us...
Of course, perpetual motion machinery is mathematically possible. A real perpetual motion machine would be a mechanism that simply conserves all energy put into the system. It would have to be 100% efficient at conserving energy, it would not produce any heat nor sound or any other form of energy. The fact is, even if it were possible, perpetual motion machinery is completely useless.
He proved himself it will not work. The net resultant force acting on pivot point is. Downwards. The centre piont of wheel to pivot points moment is also same/cancel eachother.. shifting pivot point to wheel center is only create angular momentum..😂
Talvez alguns experimento tenho apelo pra ficar interessante... Mas existe sim o movimento perpétuo... Não estou aqui para descutir com pedras... Mas informe-se e leiam... Livros de papel...
From, this channel's own description: "My models of Perpetual Motion Machines are of motorized versions that were built to illustrate how they were supposed to work in the minds of Inventors."
Hey wayne, thank you for clarifying this, although he is being a bit opposite on his more recent videos
yes but the videos clearly are made to make people believe that their is no motor
COMMON SENSE....if Gravity is pulling weights down (and not a hidden motor) then how is gravity ignoring the weight that is going up?
Thats called inertia. But over time it will stop because of friction. So its not entirrely perpetual
This is point
@I am still i don't work cuz friction cause loss of energy which make it stappp
It's just a low friction setup, it's gonna stop
Gravity works in mysterious ways.
I believe!
Wonderful. Does it still work when you remove the electrical source?
I will give you 3 gues's
😂😂😂👏👏👏
Because of this kind of vídeo some people believe the earth is flat.
😂😂😂
i mean,people still get freaked out by "magicians" act like he's a god or something,sure they gonna believe whatever being thrown at them.
Actually it's because of comments like these. This guy flat out admits these are motorized models for demonstration. If people in his comments learned how to read, you would know this by now.
@@moonlight2870 Carlos said "this kind of video" so calm down, take a break and learn to read.
What size of battery does it take???? You so funny!
Caught my eye
I built one of this e starts to rotate faster and faster that it opened a portal between dimensions
Wooowwwwww
Si no la controlas, no la consumas!!
Many people are simply incapable of appreciating science or the aim of perfection. Of course there is no true perpetual motion machineries, but there is "highly efficient" machine that conserve so many of it motion energy that it is almost perpetually moving. It is the effort on aiming on that perfection as always admirable.
The weights are free to swing and so the center of gravity of each will fall directly below the pin. So in the end the wheel will be in balance and not move.
Gravity! Lol...
My best initial modification for this wheel with periodic toggling weights is to use a sideways lever in place of one of each of the pairs of dangling weights. This way at least you could apply pressure from outside to the lever and perhaps create imbalance. Maybe having sliding weights like beads on the levers that are tethered outside to one side of the device would work. I believe this normally wouldn't work due to the need to pull past the midpoint of the wheel, but perhaps someone could modify my variation on the design.
A possibly important modification is to use heavy tethered rope as a way of pulling the weighted beads. A further modification is using a weight attached to the rope mostly near the tethered point outside the wheel, which may cause the uppermost bead on the levers on the wheel to move outwards, with little effect on any of the other beads (although there would be one rope for each bead. The beads might be designed to slide towards the tethers in every other position.
This and all other ideas for a perpetual motion machine will not work due to physics. The weights shift the center of mass of the system downward. In actuality the wheel will just bob back and forward a little before it loses to friction. Its not possible to make a true perpetual motion machine. There is a hidden motor in the machine, there always is.
You illustrate what the inventor had in mind when they conceived the device, not something which actually works. Unfortunately, some people seem to think it actually works, because they attempt to build them. Your wheel turns as fast as you spin it.
Skip Geel same people is going to believe the earth is Flat
An overbalanced wheel would start rotation by itself without being pushed .It would reach a point of equalibrium and find a rest position unless it could reset its unbalanced state some how.
Please people dont believe in this video the weights move the center of mass of the wheel downward. There is a hidden motor... there always is...
I built the same but its not infinitely rotating.mine stopped after 13 days of rotating
Because the battery ran out?
Why aren't you selling instructions or kits?
how long will it stop?
why u have to give initial push in both cases?
Please make a free energy machine out of this idea. You can make a lot of money. I will be the first to buy.
This world was waiting for your kind of genius so far.
Nice job as always.
look at the about page of this channel, they are motorised versions to demonstrate what the inventor wanted them to do, they state in their about page that none of these machines are real
Try the opposite spin
Why u not try to replace bottom plate with acrylic and show us theres no wire attach it for all your project?..maybe it will be different comments.keep a good work.
Is it battery powered or plugin
Nice small motor where did you hide the battery
What type of motor do you used??
perpetual, of course
@@veproject1 haha. Physics Don't allow perpetual motion due to friction and many more.
What kind of motor do you used to move/rotati the whole thing??
@@veproject1 ??
@@veproject1 You are supposed to tell how it worked. Or else, there's no use... Also I think there cannot be a self perpetual machine that can be operated in this Universe. Please stick with the laws of Physics.
Dear mister,,, can you add subtitle in your videos? thanks
Instructions unclear, accidentally reformed the Soviet Union.
Might this be the easiest overbalanced wheel to make?
If it's perpetual motion machine why it needs initial kick for START?
I will try this at home. Does it work...?
No
How much energy efficiency mechanical barometer have ????
So we used it as energy sources
Ótima ideia 👍👈
The magnet timing is a bit off. At the bottom looks like there's a slight pull counterclockwise.
Фейк, так как крепление груза не меняет своего места, то нахождение на внутренней или внешней орбите, самого груза, не имеет значения.
Selecting the right magnet was the hard part
The best comment ever😂
Уж сколько раз твердили миру...... Невозможно создать!!! Не надо людей обманывать.
Can we generate electricity from this.
No
Visual Education project where can we get this book
So super nice
Siempre necesita ese empuje primario y se necesitaría verlo por mas tiempo para saber si no se detiene. Se debe recordar que la idea principal de crear una maquina con movimiento perpetuo es generar energía infinita o al menos por años o siglos.
Oye amigo yo sí sé como se hace una genuina pero no tengo dinero ni apoyos.
Creo que ésta sería la parte que falta de los dos lados de la ciencia
Jonathan Barajas pues no te desanimes amigo vas por buen camino ánimos
Why the fuck is everyone talking about how this will not move forever? This is just an object that is built to lose its energy very slowly.
🔵 No matter what you do with the arrangement of the weights it's still going to work as long as there's power to the motor.
An overbalanced wheel comes from Leo Vinci and not Leo Messi. Only thing is how low is your friction to counterweight to work. Yes eventually it will stop is a most practical sense and Ideally it won't.
why beground is black wire shadow is also black because you hidden something
So you just turned off gravity of these going up right?
Bruh the steel weights and the blue weights will start tilting where the center of mass is equal
This is just a fancy fly wheel.
Why nobody use this for electricity project?
Everybody knows why....
@veproject1 You are supposed to tell how it worked. Or else, there's no use... Also I think there cannot be a self perpetual machine that can be operated in this Universe. Please stick with the laws of Physics.
muestra lo por detrás y a que tienes un motor
...How?
Good one
If we can build machines like this,than why don't we use it to generate electricity?
I make one. It spin so fast. I cannot stop it. Damn thing!
Nuo heiluvat painot eivät tuota pyörää pyöritä.
Why black foreground
Qual o truque?... Kkkk
motor elétrico na parte de trás... simples
I invented a perpetual motionless machine. I believe it will revolutionize the state of stationaryness. I just need a few million $ from fellow true visionaries to help me bring it to the world.
Кронштейны-оси грузиков симметричны на колесе, значит бесконечного движения не будет, какие бы иллюзорные формы составного груза не были, вводящие в заблуждение на взгляд. Хотя несведущим может показаться - О ! Очередное чудо !
Чудо и есть
@@veproject1 то есть, чудесным образом создали иллюзию из двух связанных жёстко грузиков: например, из стального и пенопластового. Да хоть из чего. Главное, что их общий центр тяжести каждого составного груза проходит через вертикаль к своей опорной оси, а оси расположенны симметрично на колесе. ...
По этому обстоятельству дисбаланса вращающих моментов у колес нет - нет и вращения. А движется от начального толчка, но трение в узлах механизма остановит его.
Ну да, чудесным образом создается иллюзия что это не может работать
вечный двигатель - существует! :)
If you believe in perpetual motion machines, I have a nice bridge in brooklyn to sell you
How much?
You better not be trying to sell MY bridge!
How
If this system were in an infinite loop, the 4-person seesaw would also go into an infinite loop.
what they are not showing is the black robes and child sacrifice
Simple. If it had to be spun by hand, it's a scam. The whole point of perpetual motion is it generates enough or greater power than it needs to stayin motion. Imparting energy by spinning it by hand voids the principle
I knew it is possible!
It isn’t
Machine charmer.
Now show us battery
Not correct. Every block of blue weight together with steel weight, compose a unique piece, disregarding the distance or angle between them.
So, the weight is compensated everytime at each side of the wheel.
But I enjoy this channel because it is inspiring and challenging for mind.
Wheel is weighted so once you push, it spins till little long time. Otherwise nothing in this project
It had friction, so it not last long, and condidering gravity, it doesnt work, mabye a hidden motor
Pay no attention to the man behind curtain!
Not possible. The point of attachment of the weight to the wheel is where the force is applied by the weights. There is a motor driving the wheel. Busted!!
WOW YOU’RE SoOOoOoOoo SMART. My guy read the channel description
Perpetual Machine Cannot Be Operated In This Universe.
What about Marvel Universe?
@@leonruvalcaba1549Maybe possible 😁
Hasta cuando este canal va a subir estas estupideces? Creen que alguien realmente piensa que es verdad. Atrás está el motor
結局は重り4つ付けてるのと変わらないからタネあり
Gravity cannot be infinitely looped with this device because gravity chooses to pull the heavy side of the weights attached to 2 ends. And when the heavy side comes down, the system locks.
2:56 😐🤷🏽♂️
VEPROJECT1 I love your work.. There is a light at the end of the tunnel, I really appreciate and respect all your efforts... Here is my two cents, from a 63 yrs old... Perpetual Motion is totally real, I have NO DOUBT!!! but since we born, we trained the most intelligent mind to really believed in those OLD Rules of Thermodynamics and all that BS that keep the Status Quo... which really blocked the human desire to discover new venues, new routes, new approaches... to never engage in new ways, not possible in past years but maybe possible at this time... Just because our society doesn't fully attacked the development of perpetual motion machinery, it doesn't mean that Perpetual Motion is not possible. Ask yourself... Why all the sharp minds keep trying??? If you think because they are stupid, then look yourself in the mirror... Perpetual Motion will be accomplished when a collectively open minds group of people get together with the same goal in Mind. It's not going to be easy, but not impossible... Gravity is the key, and it will never stop working for us...
Of course, perpetual motion machinery is mathematically possible. A real perpetual motion machine would be a mechanism that simply conserves all energy put into the system. It would have to be 100% efficient at conserving energy, it would not produce any heat nor sound or any other form of energy.
The fact is, even if it were possible, perpetual motion machinery is completely useless.
¿ Que raro , siempre tienen una base bastante gruesa
this dont work.... !
Arkasını da göstermelisiniz
Totalmente FALSO, el movimiento continuo no existe... Este canal sólo pretende engañar a la gente.
Wow
stick fighter?
Video os dumb comments are so dumb :D yall are made for eachother
I'll give you at least 100,000. if you build one big enough to power my house.
Soy el único que quiesiera tener todoa esos artefactos en mi casa como decoracion
пойду проверю...)))
ну и как?
@@veproject1 я Вам напишу..)))
Creo cuando es movimiento perpetuo su movimiento debe ser mas rapido a medida que avanza GRACIAS POR COMPARTIR SUS IDEAS BENDICIONES
Oye amigo yo sí sé cómo se hace una genuina pero no tengo dinero ni apoyos para hacerla.
Jonathan Barajas, como cuánto necesitas para hacerlo????
I can't believe you.
He proved himself it will not work. The net resultant force acting on pivot point is. Downwards. The centre piont of wheel to pivot points moment is also same/cancel eachother.. shifting pivot point to wheel center is only create angular momentum..😂
Pengen mencoba membuatnya di rumah...
Sayangnya nggak bakal bisa kecuali ada motor listriknya bro,
Semua proyek yg ada di channel ini, semuanya palsu, nggak ada yg beneran
Talvez alguns experimento tenho apelo pra ficar interessante... Mas existe sim o movimento perpétuo... Não estou aqui para descutir com pedras... Mas informe-se e leiam... Livros de papel...
As the swing of weight is producing torque on right side at the same time it is vice versa on left side😊
So the result is zero.
Love it
All same speed. Because one same motor used. But seems to your life is enjoy and happy.
I promise if you make this wheel it will not work
I came here just to hit that dislike
Why would you dislike it
Put these on bikes
I just wished it could be true 😥😔😟🙁
Fucking though it was real 🤦🏻♂️
trick of magnet
Rotate it at reverse