This video is exactly what I wanted to see before pulling the trigger on the Sprint 2. Love what you did with that thing man, excellent job and killer video.
SpektOne glad I could help. I have newer updated versions. Amd I am a yeah racing dealer amd can give you a good deal on sprint2 upgrade parts. Look me up in Facebook if you have a account.
I’ve literally just bought one of these as a ‘roller’ for under £45 . Not really into the drift scene (love the look and detail, just not a fan of sliding everywhere hahaha) but kudos to you for what looks like a beautiful build! 👌👌👏👏👏👍 A quick question, is this a platform that can be used on an asphalt track (not as a drift machine with plastic tyres, but a racer with rubber tyres? I race Tamiya TT01e and looking to build mine to run on rubber tyre so I can have some fun when not racing.
Im looking to buy the pandora nissan s13 silvia body with the s13 inner set and with a deni works engine bay. How do you attach the inner fender and front raditor support and engine bay to the body??
Nate's Adventures micro screws to attach fenders to engine bay and from frame. Interooler attaches by a small piece of polycarbonate plastic attached to front frame part. And front bumper support has same plastic attached to itercooler to give the impression of being mounted.
xSyReKz I set the magnets that would go on the body on top of the chassis magnet. I use the best double sided tape and apply a piece to the top of the body magnet. then I bring the body down slowly holding both rear fenders first and guide it down. (using your fingers to feel where the fender sets on the wheels) then even front and push down as well.
xSyReKz once you know you have it even. hold bottom of chassis and apply light pressure to stick the double sided tape to the.body good. #Happydrifting
Oryon rc hey I’m trying to find a rear mount battery kit for my Hpi Sprint . I have 8 hpi cars one rs4 nitro 1rs4 pro and 1 rs4 rally. I also have the sprint,sprint 2 and have the flux in route
That's probably the #1 cleanest setup i've ever seen. Good work!
Thank you very much for select our Conversion Kit! Have fun!
I recently bought the rwd conversion kit for my sprint 2, this video helped a lot thank you.
This video is exactly what I wanted to see before pulling the trigger on the Sprint 2. Love what you did with that thing man, excellent job and killer video.
SpektOne glad I could help. I have newer updated versions. Amd I am a yeah racing dealer amd can give you a good deal on sprint2 upgrade parts. Look me up in Facebook if you have a account.
Oryon rc I'll be looking you up for sure! Thanks man!
Looks amazing! Question for you: What do you think about the GPM Racing Aluminum Performance Combo Package. Thanks
I’ve literally just bought one of these as a ‘roller’ for under £45 . Not really into the drift scene (love the look and detail, just not a fan of sliding everywhere hahaha) but kudos to you for what looks like a beautiful build! 👌👌👏👏👏👍 A quick question, is this a platform that can be used on an asphalt track (not as a drift machine with plastic tyres, but a racer with rubber tyres? I race Tamiya TT01e and looking to build mine to run on rubber tyre so I can have some fun when not racing.
i have the spring 2 sport and i love it im about to put a 3300kv brushless motor in it
Dude love the car very well done.. quick question could I use the aluminum shock towers without doing the rwd conversion I really like my awd
Let's see how it slides.
Can U drop the part number for the conversion kit, the magnetic body mounts and the chassis
240sx. it was excessive. I spent a couple hundred easy prob 3-4. it's def full custom.
Good Afternoon,
Can you help me. Can I use a 48 pitch and 92T spur gear on my Hpi sprint 2. Thanks
now it's been a few years is this still a good platform or is there better cheaper routes?
Amazing RC car man
Hi I've got one of these in rwd why did you move the rear belt to the other side
How’d you make the Florida tag?
Where did you get the body mounts ???
thats a ton of bump steer
where did you get the spur gear and pinion?
What braids did you use for the wiring? Looks sick!
Ebenezer Valvi I used to sell it. Might be able to find it on hobbyking.com 5 or 6mm thick.
Ill see if I can find it on the website. Great visual mod.
is it this stuff?
hobbyking.com/en_us/wire-mesh-guard-red-10mm-5m.html
Yes that's the stuff but need to find 6mm thick. That's 10mm thick.
where this you get those wheels
But can u drift with no gyro?😊
Im looking to buy the pandora nissan s13 silvia body with the s13 inner set and with a deni works engine bay. How do you attach the inner fender and front raditor support and engine bay to the body??
Nate's Adventures micro screws to attach fenders to engine bay and from frame. Interooler attaches by a small piece of polycarbonate plastic attached to front frame part. And front bumper support has same plastic attached to itercooler to give the impression of being mounted.
Oryon rc Ok thanks
Where did you get the chassis ?
are you also running 8 holes in the rear dampers?
justin wagner no bud just got normal four in rear and stiff springs with 40wt. got an update video on the fdr change and upper motor mount.
This is ton hpi , this is a custom model
What make are the magnet body posts? Trying to find orange ones like yours
Ben G there integy. but magnets actually weren't that good. changed the magnet to rare earth magnets.
ONLY 2/3 THOUSAND AND YOU CSN HAVE ONE;)
How do you align the magnets so the body fits just right on the chassis?
xSyReKz I set the magnets that would go on the body on top of the chassis magnet. I use the best double sided tape and apply a piece to the top of the body magnet. then I bring the body down slowly holding both rear fenders first and guide it down. (using your fingers to feel where the fender sets on the wheels) then even front and push down as well.
xSyReKz once you know you have it even. hold bottom of chassis and apply light pressure to stick the double sided tape to the.body good. #Happydrifting
is the onisiki gyro good?
Is it better to use Lipo Batteries ?
Jimmy Mendez yes it is bud. besides them being lighter, more power for a longer period. Def the wau to go.
Where can I get this body
Drift King it's a pandora origin labo s13 with a pandora inner fenderless set for s13.
Thanks for that fast reply
Contact Randy beard with rare arts. He has awesome deals on bodies and fast shipping
Thanks man, I subscribed
Do I just go to contacts in Rare Arts to ask?
Look me up on Facebook. Aubrey Smith with Oryon rc. I build custom bodies for people all over the us.
Oryon rc hey I’m trying to find a rear mount battery kit for my Hpi Sprint . I have 8 hpi cars one rs4 nitro 1rs4 pro and 1 rs4 rally. I also have the sprint,sprint 2 and have the flux in route
Rims from aliexpress ;)