Confession time.... I drove it with 2 hands during the 3s Speed Runs! Sorry... I've let you down haha Win it here: Get the chance to WIN an FTX Stinger here (and 4 other other RC Cars): raffall.com/352650/enter-raffle-to-win-an-awesome-rc-car-hosted-by-phil-harrison
I definitely dont want to be the Kevin i currently am 😂😂 just buy it mod it rip it and then sink it shoutout to Kev…..he’s the reason i found your channel and absolutely love the competition you guys have that shows a strong friendship…..keep doing what you guys do and thank you for doing it
Thanks for sticking up for this amazing RC.. I was really disappointed in Kev doing that stupid video, he was a total Kevin.! I absolutely loved mine from day one, it took 5 minutes to snip a bit of material from the rear diffuser & then you can go flat out on 3S without any problems.! It's tyres are awesome too.!! I use them on my other 1/10 road cars now, they're especially good in the wet.! I'd avoid using them on salted roads because the springs, screws & driveshafts will rust quite badly.!.. Or at least rinse it off afterwards.! This car is sooooo smooth, agile, quick off the mark & fast as f***.!!! I honestly can't recommend them highly enough.! I've got a gorgeous Killerbody Nissan R-34 Skyline body in white on mine & it's just amazing.! That happened to my input shaft too, a lack of threadlock... Easy fix.!
@@TomleyRC running over stuff is fine in itself (his money, also his content style is durability and viral video style carnage of rc's, what brings his viewers), but as a point to be made yet with an inacurrate reviewing, would see as less than good. i.e. what u said when people mistake quality and price, which are 2 seperate things (kyosho miniz or fms is cheap or cheap price, but still quality). Like when people buy $700 rc and when something goes wrong... they say its normal (ofc ppl will want to fix $700 rcs), but to say junk when its cheaper price and it breaks just as often (or even less often!), a double standard.
Glad you made this video, Phil! Crazy they haven’t fixed that yet. My Panther version is maybe 2 months old and also needed to be reversed. I’m more of a jump/basher, but this still became one of my absolute favorite cars!!
True, but I've read bad reviews on the MJX 14301 where some doofus didn't read the manual (most of us don't) and went an installed the gyro upside down because he didn't know you could reverse it digitally. And in the MJX manual, they TOLD you how to reverse the gyro. People don't read things. I've seen bad reviews for the awesome Felony saying "der, um, duuuh, da car don't go straight in reverse, I'm a big fat idiot" Not understanding the fact that no car with a gyro goes straight when reversing. People are idiots, and even when you print out the helpful bits on instructions, 9 out of 10 customers won't read them. People are dumb, dumb as hell.
Got hold of two of these. both had the revered Gyro. Both lost their servo after a few rubs. We uprated the servo on both cars. We also found that we would get side impact from drifting and this caused damage to steering knuckles. Now replaced with aluminium parts and it is a great car. Done a green and pink custom paint job.
Thanks, this is the reason why I subscribed to you channel. Your videos is more informative, and that's what led me to return to this hobby and buying my 1st hobby grade rc car.
I don’t think Talbot is bad for RC at all! He may break everything he gets, but he almost always repairs it, and most of the time, does it on video. If you are a basher or looking to get into it, then you have to know that you are going to break stuff and have to figure out how to fix it. What I like is that Talbot shows the limits of each vehicle. He also gives us an idea of what types of landings and bashing is most harmful to the vehicles.
He didn't even use this correctly and then had the gaul to stand in the road shouting about how bad it was. It was an incorrect setting I grant you but he never revisited the car when he knew what was wrong.....just left his video up proclaiming it was crap.....feel bad for FTX tbh....they deserved better
Literally bought one of these last night based on your previous review, so this is good to know up front, I’ll check it first to see if they’ve corrected the gyro issue if not then atleast I know what to do, thanks!
The stinger/panther is a blast. It performance so well, it is my favorite street car right now. Drive so smoothly with the swaybars on and of course a propper gyro set up. Needs better tires for 3s and some body trimming. But it is a great car 👍🏻
Personally I think it should come working full stop or at least been sorted by now, bit telling that they haven't bothered fixing it or telling people themselves how to fix it
@@TomleyRC Really ... I think Traxxas and Armma always deliver a great out of the box experience. And the RTRs are actually ready right out of the box for fun. I've never had any issues.
Just my opinion by making these videos it's an excuse when really it's a faulty product, and they won't learn any lessons if people just buy then anyways Cheap crap
One of the main reason why watching kev is just for pure entertainment. Like he doesnt bother understanding whats wrong with an rc car and just proceeds to destroy it minutes after because he already determinate it was junk. Thats why the rc community always say to not take what he says seriously
I had to trim the body around wheels on mine! The stock wheels work totally fine, but if you don't trim the molding around the back wheel well it will also hit while ballooning and send into a spin. I also had the same issue with losing front drive! Soon as I did both, never happened again. Love the car
@@TomleyRC I'll buy one in a heartbeat! Now if someone is just able to come up with a way to jury-rig a right-handed controller for us left-handers!.. 😉
I personally wish you could buy all the rtr kits and build them your self but have the prepainted bodys and radio gear in the box, you could loctite and grease as you built them up and learn a bit as you go along. Presumably this would make the kits a bit cheaper and perhaps a better end result depending on engineering skill. (yes ive built the tamiyas in the past but they dont have ball races included on the whole, are painfully slow, and painting and stickering some rally car with livery arrggh)😅
You do get these problems with dealing with Chinese companies. The company I worked for imported HSP cars which is where this car comes from, we had a batch of nitro trucks and 1 in 4 of them they had fitted the diffs in the wrong way round, so the trucks would only run backwards. It took many emails and a video to get them to understand the problem. At least being the importers we could test every one and rebuild them correctly. And a batch of large scale petrol cars from another company that would unbind the receiver when you started the engine. It took weeks to convince the factory there was a problem, then we had to open each one and swap out the receivers with new ones. I would hope that the new cars you've bought were from the first batch and have been sitting on a shop shelf. Once the problem was discovered I should expect CML to open them up and test that the gyros are set correctly before sending out to the shops, so all models sold after you told them should have been checked and corrected as the cost in time and money is less than the cost of dealing with the customer complaints and telling shops and customers how to fix it.
Excellent video, thank you for making it. This car deserves a good, honest review. And thank you for pointing out how to solve the steering issue. Cheers mate!
I only own one rc car and it’s a brushed Traxxas slash wich I upgraded a bit but I found your video super informative and really nice to watch Kevin Talbot makes me angry by destroying “cheap stuff” for no reason
I kinda suspected that Kev was simply over looking something. Thanks, for the "proper" FTX video LOL. You and Kev are both great entertainment, and nobodys perfect.
I've liked these since they first came out. I nearly got one a few months back but went for the Rlaarlo 787 instead. Always liked my FTX cars. Got a SupaForza, DR8, Zorrow, Vantage and a Hooligan.
If you're in the UK getting the Dumbo RC doesn't make sense. The Etronix EX6G is the exact same. Same specs, same everything. It probably works out wee bit dearer but you don't have to wait weeks for delivery. Which in my eyes, that a big plus straight away.
Hey mate, I've been having a blast with this car for 2 weeks already and I experienced the same problem with the "input/output shaft" in the front. Just a question, when you screwed it back in did you use blue loctite or you just screwed it back raw? Thanks in advance
@@KevinTalbotTV I don’t think any RC electronics are intuitive enough to not need a manual. ESC’s usually have LED based menus & settings, there’s no way you’d know what to do or how to do it without a manual or video tutorial. Unless they start covering them with labelled buttons!
Hi Phil, i just ordered mine but in all the videos I saw no1 could drive it on 3s cause the rear tyres were hitting the chassis . Did you do any changes to the chassis ? Or its just better to change the tyres
Did you get the FTX or the HNR Panther? I've heard they tyre compound may be softer on the panther? No chassis changes on mine, other than adjusting the rear camber when I fitted foam wheels/tyres
That was one awaking video Phill ! I follow you and Kevin and some others in the business, but sometimes Kev have the habit to jump over his own shadow. It's not about love or hate Phill . It's about to be a professional. Keep it up mate. Cheers
Picked up the HNR Panther, ive only used 3s packs even though i can never full throttle it, i had to trim the wheel wells a bit so tires didn't rub while steering or ballooning, I now need to replace the tires tho after about a dozen 3s packs (4000mah), not sure what tires to get and getting parts seems impossible without spending a fortune in North America.
good for a beginner, but no adjustments for suspension, every piece made from plastic.....don't get me wrong it has its place, everyone has to start somewhere. But after a certain point, I can see it's just for bashing. Not that long ago I bought a team associated tc6 roller used for 80$, added a Castle setup, and a CheapO servo, and dumbo rx/tx(not really good but good for the money, c'mon help me understand how to set endpoints....in English please)....all for less than a new Traxxas vxl 4tec I built something close to race ready (still lacking skills, but, I'm learning). But it's like the difference between a base level Traxxas bandit, and a 1/10 scale race buggy..... Looks like it, but just not quite there. This has its place, just not on my shelf.
I have only seen the clip where he wrecks it, but I think you're right here. His video made this thing look bad. I don't have it, but every video I see you make with these always makes me wanna buy one, but I'm probably sticking to the 1:76-1:16 scale drift cars with gyros for now. Banggood specials
Settings in the receiver are the same as the radiolink gyro receiver settings 🤔 Its worth checking the grub screws etc and putting a dab of threadlock on them
I am not a fan of KT, he does good videos and of course people love him.. For me I got over the appeal of watching someone treat RC cars terribly and then making a claim that the RC car must be poor because it doesn't survive a 40mph jump 40 feet in the air at a concrete skate park.. However he does have a point, the car should not be like that out of the box and as it is now with the gyro reversed it will be impossible to drive,. As a side note I kept hearing him slagging off the UK and his move to the Isle of Mann which is really just a tax avoidance exercise, if the UK is so bad he can go and go riddance, not interested in all that nonsense, just want to enjoy and learn a bit about this hobby we all love. Good to see you putting it all right in this video. 😁
Interesting. I bought an original (awesome lil HBX) Ravage after seeing your video and fitted an aftermarket gyro as per the manufacturers instructions (as my run area in very loose dirt/fine gravel). Did just the same as these FTX's. Had to fit the unit upside down. Worked spot-on then 😊 Enjoying the great content. Cheers !!!
Some people may remember the days in the hobby when RTR was a dirty word!! Granted the offerings back then were all brushed and entry level, to get youngsters into the hobby. Nowadays there's so much RTR to choose from, and kits are destined for the traditional hobbyist model builders who have the time to build them to their satisfaction. Also, gyros are good for beginners in RC, but you shouldn't rely on them and not improve your driving skills before upgrading to faster motors and more powerful ESC's.
Is it worth fitting a gyro on an awd, I have a hpi rs4 sprint 3 drift, and for the youth group at church we have a tamiya tt02, would a gyro make it easier for the kids to learn?
That video where Kevin was driving his full sized car over these RC's was the exact moment I stopped watching him. So stupid to do that rather than fix it and he should know better. I'm probably a bit older than his average viewer and am not impressed! Thanks for clearing this up Phil. Top work 👍👍
i have a hopped up 144001 hooked up to a dumbo rc and i took it over to a park on an island and dropped the controller off of the side of my boat accidently (into the salt water) and it still works! Those controllers just won't die!
If Kevin didn't catch the issue, how is someone buying their first RC supposed to figure it out? If it is an "RTR", I think it needs to be reviewed it AS IS out the box - that's how the majority of people spending their money are going to experience it, especially the newbies, and it would suck for them to be put off from the hobby.
I love your digs at Kev, Phil. However, his recommendation on the DumboRC controllers/receivers is spot on. I have a fairly good collection of RC's and I run at least half of them on the Dumbo. All their respective stock controllers live in a large storage box. My question is, why didn't Kev know how to reverse the Gyro without you? Lol.
It doesn’t give the clickbait if he just fixes it. And there would be no follow up videos. KP likes to really drag things out rather than just give the info
As a manufacturer to send this out after months of them being sold is shocking even putting a leaflet or a flyer in the box would save people so much grief when first using them FTX should be ashamed
I have seen several videos of people adjusting end points. But few are very clear(or in English). Someone should definitely make a video about how to set it up, because I know it's possible. (Or maybe give us access to the "tuning software" that plugs into the side with a mini USB. I know it exists, we just don't get it outside of Hong Kong..... Just my theory
Had the same problem when when i got mine also that's why i made a little video on it on the gyro also but I'm sure on mine i had to press it twice 🤔 (HNR )
I love my stinger to be fair I think it's great, yes my gyro is backwards but just switched it off! have you discovered its got police lights yet? steering to the right 3 times gives hazards 4 times you get police lights 😀🐿
My go-to radio setup now is the Radiomaster MT12 tx with Dumborc rx. The Dumborc receivers are dirt cheap and the MT12 gives all the adjustments and programming you could wish for.
i tried one of the dumbo rc remotes, but they just dont work for me. i use my right hand for the throttle and left for the steering, and there just isnt enough room for my finger behind the dropped down steering wheel.
I've got both colours too. After your 1st review of it 😂, haven't used the grey one. The red is the abused one, hoping to get build.skme display shelfs in the front room soon get them out the garage, also got the kyosho skyline, not to use just for display as looks great from the outside as you know. But basic and brushed inside
Ok, one question... what's with that rear wing? The angle on it makes it look like it's on backwards. Anyway, it's an easy fix, but this is why I don't like integrated gyros. I'd rather either have a separate unit or no gyro at all.
Oh man, I really love Kev but when I saw this video I was really riled up. It was crystal clear that there was a gyro direction issue, so I am amazed that an experienced hobbyist like Kev did not figure that out in a heartbeat 🤷🏻♂️
@TomleyRC One of my favorite Kev moments was when he took a buggy to the local indoor track that I saw you race your Tamiya BBX at. He put it into the wall after hitting a jump FULL SEND. The poor marshal could've been seriously injured but I couldn't stop laughing 😂😂😂
Its "TEWWABAL!" 😂 Just getting back into RC cars, started watching KT videos but can't handle the constant shoutiness... Guys like a hyperactive 9 year old. This channel is much better.... And no "booms!"
I love watching both of y'all. You and Kevin are my two most favorite YT people. I always watch yours and his videos the moment they come out. Always knew its a friendly rivelary. I tried to drum one up with other local Texas YT guys but they just get offended. Oh well. Great video Phil!
Rocky’s channel should be the face of fearless RC Thunder RC is the place to be if you’re looking to see a 1/5 th scale bashing beast. Anything else is French toast 👊☺️
Been toying with idea of getting back into RC for a while. Last RC was a panda stocker and a futaba attack sr transmitter. If this comes with drift wheels, gyro and is 3s capable it might be what I have been looking for. How easy are parts to get and would it accept another body? I have vague memories of 190mm wide and 200mm wide bodies on 1:10th stuff before
So, um, I ordered from ALI EXpress just based on your previous vidoes about the track mat and the Hoonigan RC cars. You said you had a bad experience with them in this video. Do I need to worry about my shipment not arriving?
The point here isn't Kevin guys the point is the RC car is fun cheap and easy to correct the factory problem with the gyro so let's put our big boy pants on here and put down the hater aid ok. . cheers everyone from Alexander kowaliuk.
I hated that video of Kev's. As you said though, carnage and destruction are his gimmick. Also, did you run foams on your previous 3s speed runs, cause in my experience foams are usually a bit smaller in diameter than standard rubber tyres, even before trueing. That could explain the difference in top speed. Top video though, and a bit of positivity for what seems to be a great, budget "street basher". Keep up the good work, cause I've bought 2 budget rc's (Hyper Go ute, and MJX Rock Van) after seeing your videos on them, and they're both just as much fun as you said.
Nice little street/car park basher but a shame FTX didn’t fix the issue? 🤷♂️ But flip to RUclips do a bit of research and here’s the video to show how to fix your FTX. Great stuff 💯😎👍
Confession time....
I drove it with 2 hands during the 3s Speed Runs! Sorry... I've let you down haha
Win it here: Get the chance to WIN an FTX Stinger here (and 4 other other RC Cars): raffall.com/352650/enter-raffle-to-win-an-awesome-rc-car-hosted-by-phil-harrison
👍&🔔
I definitely dont want to be the Kevin i currently am 😂😂 just buy it mod it rip it and then sink it shoutout to Kev…..he’s the reason i found your channel and absolutely love the competition you guys have that shows a strong friendship…..keep doing what you guys do and thank you for doing it
I feel cheated....😓
we did the best in Dunkirk and we are as sure as frogs to love you like she does lol
La la no no anglais ne m'abandonne pas lol nous avons une poésie d'histoire
Thanks for sticking up for this amazing RC..
I was really disappointed in Kev doing that stupid video, he was a total Kevin.!
I absolutely loved mine from day one, it took 5 minutes to snip a bit of material from the rear diffuser & then you can go flat out on 3S without any problems.!
It's tyres are awesome too.!!
I use them on my other 1/10 road cars now, they're especially good in the wet.!
I'd avoid using them on salted roads because the springs, screws & driveshafts will rust quite badly.!.. Or at least rinse it off afterwards.!
This car is sooooo smooth, agile, quick off the mark & fast as f***.!!!
I honestly can't recommend them highly enough.!
I've got a gorgeous Killerbody Nissan R-34 Skyline body in white on mine & it's just amazing.!
That happened to my input shaft too, a lack of threadlock... Easy fix.!
MY GOD THANKS PHIL! I am a Kev fan, but i absolutely HATE that video, because the car itself is absolutely epic
Thanks, Phil, awesome video 🎉
Yeah, hard to watch. I can deal with skatepark destruction… but not running stuff over
@@TomleyRC absolutely true!
btw thanks god I watched your video first, not Kev's one lol
@@TomleyRC running over stuff is fine in itself (his money, also his content style is durability and viral video style carnage of rc's, what brings his viewers), but as a point to be made yet with an inacurrate reviewing, would see as less than good.
i.e. what u said when people mistake quality and price, which are 2 seperate things (kyosho miniz or fms is cheap or cheap price, but still quality). Like when people buy $700 rc and when something goes wrong... they say its normal (ofc ppl will want to fix $700 rcs), but to say junk when its cheaper price and it breaks just as often (or even less often!), a double standard.
How many of us said "absolutely epic" to ourselves in a Talbot style..... 😂
@@lukedavis4213 DEFINITELY MORE THAN A THOUSAND MILLION TIMES!
Glad you made this video, Phil! Crazy they haven’t fixed that yet. My Panther version is maybe 2 months old and also needed to be reversed. I’m more of a jump/basher, but this still became one of my absolute favorite cars!!
Yeah, it’s really annoying they haven’t bothered to sort it. They come from the same factory… and 100% they would know it’s an issue. Such a beast 👌
At the very least, they could put a piece of paper in the box telling you how to fix the gyro.
I agree. Shouldn’t still be an issue
True, but I've read bad reviews on the MJX 14301 where some doofus didn't read the manual (most of us don't) and went an installed the gyro upside down because he didn't know you could reverse it digitally.
And in the MJX manual, they TOLD you how to reverse the gyro.
People don't read things.
I've seen bad reviews for the awesome Felony saying "der, um, duuuh, da car don't go straight in reverse, I'm a big fat idiot"
Not understanding the fact that no car with a gyro goes straight when reversing. People are idiots, and even when you print out the helpful bits on instructions, 9 out of 10 customers won't read them.
People are dumb, dumb as hell.
Manuals from china suck and always should go to RUclips lol.
Got hold of two of these. both had the revered Gyro. Both lost their servo after a few rubs. We uprated the servo on both cars. We also found that we would get side impact from drifting and this caused damage to steering knuckles. Now replaced with aluminium parts and it is a great car. Done a green and pink custom paint job.
Thanks, this is the reason why I subscribed to you channel. Your videos is more informative, and that's what led me to return to this hobby and buying my 1st hobby grade rc car.
Cheers dude
I had the same problem, even without a crash. Used loctite on that screw and it still holds up 👍🏻
I don’t think Talbot is bad for RC at all! He may break everything he gets, but he almost always repairs it, and most of the time, does it on video. If you are a basher or looking to get into it, then you have to know that you are going to break stuff and have to figure out how to fix it.
What I like is that Talbot shows the limits of each vehicle. He also gives us an idea of what types of landings and bashing is most harmful to the vehicles.
Yes… for most people he’s not an issue at all.
He didn't even use this correctly and then had the gaul to stand in the road shouting about how bad it was. It was an incorrect setting I grant you but he never revisited the car when he knew what was wrong.....just left his video up proclaiming it was crap.....feel bad for FTX tbh....they deserved better
To be fair, I wouldn't mind being a Kevin, if it meant I owned a Lamborghini and a workshop full of RCs!
Yes haha… although swap the Lamborghini for a nice 934 or 993 Turbo 👌
And a monster truck 😂
Don't forget the real monster truck
@@TomleyRC 959 😉
yep and sits there doing nothing@@uvbntangoed100
Great video , has anyone tried just turning the receiver around 180 ? should have same effect .
Yes this will also solve the issue
Awesome bashing, Phil! 😃
Thanks for showing how to invert it! I don't have one, but some day... 😬
Anyway, stay safe there with your family! 🖖😊
No worries dude :)
Literally bought one of these last night based on your previous review, so this is good to know up front, I’ll check it first to see if they’ve corrected the gyro issue if not then atleast I know what to do, thanks!
The stinger/panther is a blast. It performance so well, it is my favorite street car right now. Drive so smoothly with the swaybars on and of course a propper gyro set up. Needs better tires for 3s and some body trimming. But it is a great car 👍🏻
I’m going to upgrade the servo and put the away bars on mine… and then maybe some better wheels tyres
@@TomleyRCsway bars make a difference in my opinion. Let us know how it is after the mods 👍🏻
Personally I think it should come working full stop or at least been sorted by now, bit telling that they haven't bothered fixing it or telling people themselves how to fix it
I agree… it should. All RTR’s should, but in reality they don’t unfortunately
@@TomleyRC Really ... I think Traxxas and Armma always deliver a great out of the box experience. And the RTRs are actually ready right out of the box for fun. I've never had any issues.
Every RTR can have QC issues.. it's common they are all mass produced in China or Taiwan @@myharryface
Just my opinion by making these videos it's an excuse when really it's a faulty product, and they won't learn any lessons if people just buy then anyways
Cheap crap
@@fraserhanvey9739 Blah blah blah
One of the main reason why watching kev is just for pure entertainment. Like he doesnt bother understanding whats wrong with an rc car and just proceeds to destroy it minutes after because he already determinate it was junk. Thats why the rc community always say to not take what he says seriously
I had to trim the body around wheels on mine! The stock wheels work totally fine, but if you don't trim the molding around the back wheel well it will also hit while ballooning and send into a spin. I also had the same issue with losing front drive! Soon as I did both, never happened again. Love the car
5:39 I've never seen a thumb nodule cable-tied onto a steering wheel like that. That is excellent.
That's my own design... I may start selling them at some point
@@TomleyRC I'll buy one in a heartbeat!
Now if someone is just able to come up with a way to jury-rig a right-handed controller for us left-handers!.. 😉
Kevin and Tomely seem like brothers more than just friends😊
I personally wish you could buy all the rtr kits and build them your self but have the prepainted bodys and radio gear in the box, you could loctite and grease as you built them up and learn a bit as you go along. Presumably this would make the kits a bit cheaper and perhaps a better end result depending on engineering skill. (yes ive built the tamiyas in the past but they dont have ball races included on the whole, are painfully slow, and painting and stickering some rally car with livery arrggh)😅
Glad you guys worked it out... We all have differences, biggest thing is rule #1 for me in rc-ing. HAVE FUN!!!! Good job
The Best Bang for your Buck 1/10 Street Basher, bar none.!
Brilliant. Bargain. Beast.!
I agree 100%
And it is even on 2s superb. Very smooth and a lot of control. Like on both, 2s and 3s 🎉
You do get these problems with dealing with Chinese companies. The company I worked for imported HSP cars which is where this car comes from, we had a batch of nitro trucks and 1 in 4 of them they had fitted the diffs in the wrong way round, so the trucks would only run backwards. It took many emails and a video to get them to understand the problem. At least being the importers we could test every one and rebuild them correctly. And a batch of large scale petrol cars from another company that would unbind the receiver when you started the engine. It took weeks to convince the factory there was a problem, then we had to open each one and swap out the receivers with new ones.
I would hope that the new cars you've bought were from the first batch and have been sitting on a shop shelf. Once the problem was discovered I should expect CML to open them up and test that the gyros are set correctly before sending out to the shops, so all models sold after you told them should have been checked and corrected as the cost in time and money is less than the cost of dealing with the customer complaints and telling shops and customers how to fix it.
Excellent video, thank you for making it. This car deserves a good, honest review. And thank you for pointing out how to solve the steering issue. Cheers mate!
Great video.
Thinking to order one but worry about the replacement part. Are they available if something breaks?
much fairer product test and opinion. Thanks ! They really are great fun for the money.
I only own one rc car and it’s a brushed Traxxas slash wich I upgraded a bit but I found your video super informative and really nice to watch Kevin Talbot makes me angry by destroying “cheap stuff” for no reason
You want to have a look at the new dumborc DDF-350 transmitter. Amazing for the money and so many features its like a high end one.
I kinda suspected that Kev was simply over looking something. Thanks, for the "proper" FTX video LOL. You and Kev are both great entertainment, and nobodys perfect.
he kinda did it how any normal customer likely would... only takes one crash with that crap and its all wasted money
Love it when you and Kev reference each other or get together! Keep up the good work
Thanks for this review. I was upset after Kevin destroyed them without even considering a quick fix. It's a great affordable RC.
I've liked these since they first came out. I nearly got one a few months back but went for the Rlaarlo 787 instead. Always liked my FTX cars. Got a SupaForza, DR8, Zorrow, Vantage and a Hooligan.
Kevin has a very nice channel and has cool stuff, but yours is different and that is why I like both 😀🤙
If you're in the UK getting the Dumbo RC doesn't make sense. The Etronix EX6G is the exact same. Same specs, same everything. It probably works out wee bit dearer but you don't have to wait weeks for delivery. Which in my eyes, that a big plus straight away.
Hey mate, I've been having a blast with this car for 2 weeks already and I experienced the same problem with the "input/output shaft" in the front. Just a question, when you screwed it back in did you use blue loctite or you just screwed it back raw? Thanks in advance
You're 100% right. These are not junk. Kevin needs to stick to his monster trucks reviewing them. Street bashers are not Kevin's strong suit.
Great video 🎉🎉 but for myself, i prefer a car out of the box that's ready to go, no confusion ❤
Ah yes, that one episode, well, reading manuals should be normal thing for everyone.
I do read manuals if I need to.
Well.. I mean it wasn’t in the manual… but a quick search brings up plenty of fixes 👍
A good product don’t need a manual, a good product is intuitive
@@KevinTalbotTV I don’t think any RC electronics are intuitive enough to not need a manual. ESC’s usually have LED based menus & settings, there’s no way you’d know what to do or how to do it without a manual or video tutorial. Unless they start covering them with labelled buttons!
Hi Phil, i just ordered mine but in all the videos I saw no1 could drive it on 3s cause the rear tyres were hitting the chassis . Did you do any changes to the chassis ? Or its just better to change the tyres
Did you get the FTX or the HNR Panther? I've heard they tyre compound may be softer on the panther?
No chassis changes on mine, other than adjusting the rear camber when I fitted foam wheels/tyres
@TomleyRC you are probably right, I got the hnr , I will order other tyres then , thank you so much for responding 🙏🙏
That was one awaking video Phill ! I follow you and Kevin and some others in the business, but sometimes Kev have the habit to jump over his own shadow. It's not about love or hate Phill . It's about to be a professional. Keep it up mate. Cheers
Picked up the HNR Panther, ive only used 3s packs even though i can never full throttle it, i had to trim the wheel wells a bit so tires didn't rub while steering or ballooning, I now need to replace the tires tho after about a dozen 3s packs (4000mah), not sure what tires to get and getting parts seems impossible without spending a fortune in North America.
good for a beginner, but no adjustments for suspension, every piece made from plastic.....don't get me wrong it has its place, everyone has to start somewhere. But after a certain point, I can see it's just for bashing.
Not that long ago I bought a team associated tc6 roller used for 80$, added a Castle setup, and a CheapO servo, and dumbo rx/tx(not really good but good for the money, c'mon help me understand how to set endpoints....in English please)....all for less than a new Traxxas vxl 4tec I built something close to race ready (still lacking skills, but, I'm learning).
But it's like the difference between a base level Traxxas bandit, and a 1/10 scale race buggy.....
Looks like it, but just not quite there.
This has its place, just not on my shelf.
Can you please recommend the perfect 3s lipo and wheels for 3s mate?
Please do a review on the new FTX Gladius. I love your reviews! Hope you see my comment!
I have only seen the clip where he wrecks it, but I think you're right here. His video made this thing look bad. I don't have it, but every video I see you make with these always makes me wanna buy one, but I'm probably sticking to the 1:76-1:16 scale drift cars with gyros for now. Banggood specials
Settings in the receiver are the same as the radiolink gyro receiver settings 🤔
Its worth checking the grub screws etc and putting a dab of threadlock on them
Just cause you're friends doesn't mean you cant have different opinions or criticise each other
I am not a fan of KT, he does good videos and of course people love him.. For me I got over the appeal of watching someone treat RC cars terribly and then making a claim that the RC car must be poor because it doesn't survive a 40mph jump 40 feet in the air at a concrete skate park.. However he does have a point, the car should not be like that out of the box and as it is now with the gyro reversed it will be impossible to drive,. As a side note I kept hearing him slagging off the UK and his move to the Isle of Mann which is really just a tax avoidance exercise, if the UK is so bad he can go and go riddance, not interested in all that nonsense, just want to enjoy and learn a bit about this hobby we all love. Good to see you putting it all right in this video. 😁
Interesting. I bought an original (awesome lil HBX) Ravage after seeing your video and fitted an aftermarket gyro as per the manufacturers instructions (as my run area in very loose dirt/fine gravel). Did just the same as these FTX's. Had to fit the unit upside down. Worked spot-on then 😊
Enjoying the great content. Cheers !!!
Some people may remember the days in the hobby when RTR was a dirty word!! Granted the offerings back then were all brushed and entry level, to get youngsters into the hobby. Nowadays there's so much RTR to choose from, and kits are destined for the traditional hobbyist model builders who have the time to build them to their satisfaction.
Also, gyros are good for beginners in RC, but you shouldn't rely on them and not improve your driving skills before upgrading to faster motors and more powerful ESC's.
Great vid have one on order. Any links to the wheels you used
No Rtr is perfect. This one in my opinion is great. On 3s wity the drift tires pulls extremely nice power slides as a great speed
Is it worth fitting a gyro on an awd, I have a hpi rs4 sprint 3 drift, and for the youth group at church we have a tamiya tt02, would a gyro make it easier for the kids to learn?
That video where Kevin was driving his full sized car over these RC's was the exact moment I stopped watching him. So stupid to do that rather than fix it and he should know better. I'm probably a bit older than his average viewer and am not impressed! Thanks for clearing this up Phil. Top work 👍👍
i have a hopped up 144001 hooked up to a dumbo rc and i took it over to a park on an island and dropped the controller off of the side of my boat accidently (into the salt water) and it still works! Those controllers just won't die!
Great vid! Would be nice to have km/h as well when doing speed runs.
If Kevin didn't catch the issue, how is someone buying their first RC supposed to figure it out? If it is an "RTR", I think it needs to be reviewed it AS IS out the box - that's how the majority of people spending their money are going to experience it, especially the newbies, and it would suck for them to be put off from the hobby.
This car looks very very good and has got a fantastic sound on 3S full trigger. Love it
The sound that makes on the fly by speed Run sounds mental.
Did you notice a loss in downforce when the wing snapped off? 😜
Good vid.👊
Haha.. it was more stable in the air without it 😅
I love your digs at Kev, Phil. However, his recommendation on the DumboRC controllers/receivers is spot on. I have a fairly good collection of RC's and I run at least half of them on the Dumbo. All their respective stock controllers live in a large storage box. My question is, why didn't Kev know how to reverse the Gyro without you? Lol.
I agree… I use them on loads of my stuff. Not sure why he didn’t know, I’ve set them up on multiple rigs
It doesn’t give the clickbait if he just fixes it. And there would be no follow up videos. KP likes to really drag things out rather than just give the info
I've just got the new dumborc transmitter it's good can even turn the gyro on and off without messing about pressing the button on the receiver
I have had the same scam going on at the same time you got scammed.... thanks for the correct seller link ❤❤
As a manufacturer to send this out after months of them being sold is shocking even putting a leaflet or a flyer in the box would save people so much grief when first using them FTX should be ashamed
Is there a way to set end point on the transmitter for steering? Not dualrates.
Thanks
Not end points that I could see, but you can adjust the dual rate. I turned it down a little for the 3s runs
I have seen several videos of people adjusting end points. But few are very clear(or in English).
Someone should definitely make a video about how to set it up, because I know it's possible. (Or maybe give us access to the "tuning software" that plugs into the side with a mini USB.
I know it exists, we just don't get it outside of Hong Kong.....
Just my theory
that red is flipping gorgeous 😀👍if it wasnt for you guys on youtube i wouldn't know how to fix alot of my stuff 👍👍😀
I agree.. looks so nice in the sun
I like it, and I would definitely give it a go! Red colour rocks!
Dont be a Kevin 'I AM NOT YOUR SLAVE' 😂😂 be a Perry and have a jam sandwich 😎
..'that's so unfair!'.....
haha... loved K&P
Had the same problem when when i got mine also that's why i made a little video on it on the gyro also but I'm sure on mine i had to press it twice 🤔 (HNR )
Yes.. I’m sure I had to press it twice on my other one. 🤷🏼♂️
I wouldn't be surprised if you could just take the receiver out turn it 180° and put it back in place if possible I bet that would work
I love my stinger to be fair I think it's great, yes my gyro is backwards but just switched it off! have you discovered its got police lights yet? steering to the right 3 times gives hazards 4 times you get police lights 😀🐿
For my speed run cars i actually balance my tires / wheels. I would love to see how others balance their RC tires / wheels.
Yes, it makes a big difference
Best 1/10 of 2023...period. Do yourself a favor and get one ❤🤩
I agree 100.3%
@@TomleyRC wow that's WAY more than 100
@@disciplinerc imperial percentage is always higher 😅
My go-to radio setup now is the Radiomaster MT12 tx with Dumborc rx. The Dumborc receivers are dirt cheap and the MT12 gives all the adjustments and programming you could wish for.
i tried one of the dumbo rc remotes, but they just dont work for me. i use my right hand for the throttle and left for the steering, and there just isnt enough room for my finger behind the dropped down steering wheel.
I've got both colours too. After your 1st review of it 😂, haven't used the grey one. The red is the abused one, hoping to get build.skme display shelfs in the front room soon get them out the garage, also got the kyosho skyline, not to use just for display as looks great from the outside as you know. But basic and brushed inside
Maybe the speed difference was to do with the foam tyres not ballooning like the rubber ones🤔
Ok, one question... what's with that rear wing? The angle on it makes it look like it's on backwards.
Anyway, it's an easy fix, but this is why I don't like integrated gyros. I'd rather either have a separate unit or no gyro at all.
Oh man, I really love Kev but when I saw this video I was really riled up. It was crystal clear that there was a gyro direction issue, so I am amazed that an experienced hobbyist like Kev did not figure that out in a heartbeat 🤷🏻♂️
@TomleyRC One of my favorite Kev moments was when he took a buggy to the local indoor track that I saw you race your Tamiya BBX at. He put it into the wall after hitting a jump FULL SEND. The poor marshal could've been seriously injured but I couldn't stop laughing 😂😂😂
temloy rc which is better traxxas unlimited desert racer or traxxas sledge
Its "TEWWABAL!" 😂 Just getting back into RC cars, started watching KT videos but can't handle the constant shoutiness... Guys like a hyperactive 9 year old. This channel is much better.... And no "booms!"
I love watching both of y'all. You and Kevin are my two most favorite YT people. I always watch yours and his videos the moment they come out. Always knew its a friendly rivelary. I tried to drum one up with other local Texas YT guys but they just get offended. Oh well. Great video Phil!
Rocky’s channel should be the face of fearless RC
Thunder RC is the place to be if you’re looking to see a 1/5 th scale bashing beast.
Anything else is French toast 👊☺️
Don’t worry about Kevin, keep doing your own thing.
Those Stingers are annoyingly expensive over here in the US on eBay. Contest entered!
That gyro seems way oversensitive!! Is there a sensitivity adjustment screw ??
Looks very tt01 to me. That's a compliment in my opinion. Neat car!
Yes those rc cars are awesome with the right tuning.
This might be my first Street smacher...I like it's look
Would love the red one are you running that in a comp?, might be my next purchase.
Been toying with idea of getting back into RC for a while. Last RC was a panda stocker and a futaba attack sr transmitter. If this comes with drift wheels, gyro and is 3s capable it might be what I have been looking for.
How easy are parts to get and would it accept another body? I have vague memories of 190mm wide and 200mm wide bodies on 1:10th stuff before
So, um, I ordered from ALI EXpress just based on your previous vidoes about the track mat and the Hoonigan RC cars. You said you had a bad experience with them in this video. Do I need to worry about my shipment not arriving?
I’ve ordered hundreds of things and only had a couple of issues, so you should be okay.
@@TomleyRC thanks for the response and your videos. Keep at it!
Don't be a Kevin😂 i would love to be a Kevin
Haha
They both are amazing
Btw waiting for that 10x10 truck😅
The point here isn't Kevin guys the point is the RC car is fun cheap and easy to correct the factory problem with the gyro so let's put our big boy pants on here and put down the hater aid ok. . cheers everyone from Alexander kowaliuk.
£176.99 on Aliexpress. No battery, delivered to my door. They only had the grey one left. 👍
Thanks tomley love your channel
Hello sir how are you. Where did you get that thumb piece for the control
Did you add the sway bars?
I hated that video of Kev's. As you said though, carnage and destruction are his gimmick.
Also, did you run foams on your previous 3s speed runs, cause in my experience foams are usually a bit smaller in diameter than standard rubber tyres, even before trueing. That could explain the difference in top speed. Top video though, and a bit of positivity for what seems to be a great, budget "street basher". Keep up the good work, cause I've bought 2 budget rc's (Hyper Go ute, and MJX Rock Van) after seeing your videos on them, and they're both just as much fun as you said.
Nice little street/car park basher but a shame FTX didn’t fix the issue? 🤷♂️ But flip to RUclips do a bit of research and here’s the video to show how to fix your FTX. Great stuff 💯😎👍