Yeah. What he said. Plus your showing me what I need to know and learn to DIY kind of thing. I'm working on a 96 D21 Kingcab Hardbody. The last owner did some bad body work and I'm building it as project. The body work is the next stage. Keep showing how tondo metal work without body filler.
I’m glad to see u start ur own channel. U can pay for more tools to do what u love with. From what I can tell by watching u what I have u are a very gifted metal repair man. Not a bond slinger. Good luck with all u do. From a good old ky boy
Ha!! I found you! A few weeks ago, i said slick should start a channel. And someone said he didn't have time for that nonsense. And a few short weeks later. Boom, his channel is up on my, you might also like page. Im in. Let's go, slick 50!!
My husband and I are really enjoying your content. We like the quiet calm of no music and even when you just have a quiet moment without talking. This is in no way ment to keep you from doing things your way, we just wanted to let you know we love what your throwing down! You are so talented at what you do with your fabrication.
Love the channel keep up the great work now we have a channel that people can learn the body workside and panel beating side and 32 fords rule top work 💪💯🚗🏁👍👍👍
Keep up the good work as the young 1nz need to learn as this skill it is being lost all over the world and the plastic sxxt boxes are trying to take over not in my book they wont it be great to see a full build from start to finish but thats going to take hours to vid and edit but somethink to think about later on 💯🚗🚗🚗👍
People need to realize that the workmanship Slick does is a dying art this is not a bondo packed repair this takes time and a lot of elbow grease...Remember you get what you pay for!
I’m glad you’re showing us how you like fixing things. But mostly you don’t talk crap on other people’s work. You let us come up with our own conclusions 💪🏼🔥🔥👍🏼
Slick! You will find that when you spend more time in front of the camera, you will become a better body/fabricator. It comes with the experience. You are getting better every episode my brother!❤
I enjoy your content . I am amazed at your patience and care that you put into doing your job correctly.keep up the good work there are not many people who could putout the quality of work that you do. You will always have work.
Hey slick, we need a P.O. box number so we can start sending you stuff. I'd like to donate some tig welding stuff furrick cups etc, and a few tools I like to use around the shop. We all helped puddin' and sent him stuff now its your turn. 😂
Great job 50. Really learned a lot today. This is going to be a good long run for you because you’ve created something. That’s fun educational and entertaining. Keep up the good work and don’t change.
Thanks for the reply. You amaze me with your knowledge at such a young age. I've been around for over 70 years and have never seen such skills. Well done.
Your skill at joining metal and making the joint disappear is incredible! I've seen other car shows where the camera records about five seconds and then - presto, it's all done. Your detailed explanation and full length recording is SO HELPFUL to understand how the process works. I'm really enjoying this!
Wow. The more you tear apart. The more needs tore out and fixed back to original. Rat Rod Bob is building on a 32 fiberglass hot rod. Always like to watch a good body guy work.
I really liked seeing the technical part of fixing and flattening the door skins. It was very educational. I'm really looking forward to seeing the rest of the repair on that three window.
I like that you really take your time to get really clean results with your metal work. Slick. You could just clear over the bare metal, and it would look better than any paint job.
These are amazing skills put into this work, you can see how the previous work was all bubbly and full of cavities, but what Slick's done here is SOLID, and would stand up to any factory stamping or welding or even leadwork. Proper process, with good products, combined with taking your time and not skipping steps, is what will always give great results. As they say in music, practice does not make perfect, but perfect practice makes perfect!
Slick, it's aweome that you do such good work. When body work is done correctly it will last and not fall apart. Glad you started your channel. Love the old hotrods.
Slick does it the right way,body man fixes . Anyone can slap mud on the car, truck or whatever. Back in the 80s I took a body shop class Mr. Johnson , retired body man taught the class. Old skool , true body man fixes dents wrinkles,bent up panels, any one can slap mud on grind on metal make it look decent.
3:42 man a few door closing from my wife and that sucker would have been in pieces. Good on you for seeing this and fixing it instead of covering it up.
Some of us are new to this kind of work, so maybe in the future you could explain what some of your special tools do -- like that flat spatula you used after the hammer. Also , please tell us why body men set the panel on that flimsy stand and let it bounce all over while you're hammering on it! Seems like you'd want the working surface to be well secured so you don't hit it wrong.
Thank you for your comment! The spatula looking thing is actually a body hammer called a slap hammer. The slap hammer has a larger footprint than a traditional body hammer. We will do a better job at explaining more of the tools used in future videos.🙏🏼
Slick Fitty, I mean no harm or ill will, but the videos with just you (including Bill) I enjoy more than anything. This was an excellent video! Keep them coming brother! You have MAD TALENT!
Slick 50 is known world wide now. I'm watching from Warrensburg, Mo. Your work is top notch. I wouldn't hesitate to have you work on a vintage unit if I had one.
Slick you are really talented. Watching you tackle that door was pretty sick. You have a ton of pride in your work and the steps you take to do things the right way. I see why you have a full shop. I’m glad this video was this content today. Also def looking forward to buffing the short wide. I have many years experience in buffing. But I learn something new every day so I can’t wait to see your process. Btw I want a “If that makes cents “ shirt with a hammer and dolly on it lol. That’s def how you make your 💵 and cents. I’m still begging Puddin for a Wang Dangle shirt. Or a Call Jim Alva shirt lol.
@OKspeedandcustom yeah, went through divorce at 24 and had to let it go. Life happens. Still love them. I think I paid $750 for the cab and doors back then. It was a deal. Love all the 32 fords but the pickup was my favorite. Didn't matter full body, with or without fenders, regular box, flatbed, heck even a fuel hualer. Just enjoy the look.
I can tell I'm going to learn a lot on your channel. In the future I would like to see how you go about cutting out rust on fenders or quarter panels and then welding in patch panels.
Thanks!
Are you crazy????😂🙏🏼
You the only person I’ve ever seen explain how and why metal work is done, thank you. From what I’ve seen you are definitely one of the best.
I agree!! Slick's a metal magician!
I though the exact same thing
Yeah. What he said. Plus your showing me what I need to know and learn to DIY kind of thing.
I'm working on a 96 D21 Kingcab Hardbody. The last owner did some bad body work and I'm building it as project. The body work is the next stage.
Keep showing how tondo metal work without body filler.
You have actual footage of a wild Bill in his natural habitat lol.
Haha thats the truth!
I’m glad to see u start ur own channel. U can pay for more tools to do what u love with. From what I can tell by watching u what I have u are a very gifted metal repair man. Not a bond slinger. Good luck with all u do. From a good old ky boy
Ha!! I found you! A few weeks ago, i said slick should start a channel. And someone said he didn't have time for that nonsense. And a few short weeks later. Boom, his channel is up on my, you might also like page. Im in. Let's go, slick 50!!
Let's goo!!!
I'm just glad that I get Bill on 2 channels now!
😎❤️❤️❤️
My husband and I are really enjoying your content. We like the quiet calm of no music and even when you just have a quiet moment without talking. This is in no way ment to keep you from doing things your way, we just wanted to let you know we love what your throwing down! You are so talented at what you do with your fabrication.
Thank you both so much!
Watching you work metal into the shape you want makes me wanna go bend some steel. Thanks for sharing with us Slick
Sounds like fun 😎💪🏼
I'm happy Slick started this channel. I'll watch all the content 😢
Appreciate you Edward!
It's great to see Bill has found a home on RUclips 😊
Wild Bill!!! ❤️
Bill...the man with many homes! Always happy to see him!
Miss seeing him riding his bike by Puddin’s old shop 😂
Old bill 💵
I'm glad you started showing us how to do metal work. A lot of us have been wanting this for a long time.
🙏🏼🙏🏼🙏🏼
Yes, thank you Slick! 🍻
Well done slick from james in uk 🇬🇧👍💯🏁🚗💯🏁
Wow! Thanks for watching
Love the channel keep up the great work now we have a channel that people can learn the body workside and panel beating side and 32 fords rule top work 💪💯🚗🏁👍👍👍
@@thisisdicey613 more 32s to come!!! 🙏🏼🙏🏼🙏🏼
Keep up the good work as the young 1nz need to learn as this skill it is being lost all over the world and the plastic sxxt boxes are trying to take over not in my book they wont it be great to see a full build from start to finish but thats going to take hours to vid and edit but somethink to think about later on 💯🚗🚗🚗👍
P.s tell pudding tang dice in uk 🇬🇧 says fords rule 💪💯👍👍👍🇬🇧
Love the format , as you explained you add in some captions to hit the point home. Great job! Cant wait for the next videos….
Appreciate your support Vincent!
Really dig the attention to detail and true craftsmanship. It's awesome to see one of the younger generations keeping these skills and cars alive.
Thank you!!🙏🏼
People need to realize that the workmanship Slick does is a dying art this is not a bondo packed repair this takes time and a lot of elbow grease...Remember you get what you pay for!
That's a fact. You get what you pay for! 🤙🏼
Absolutely!
I’m glad you’re showing us how you like fixing things.
But mostly you don’t talk crap on other people’s work. You let us come up with our own conclusions 💪🏼🔥🔥👍🏼
No bad energy! Live and learn. 🙏🏼
Slick!
You will find that when you spend more time in front of the camera, you will become a better body/fabricator.
It comes with the experience.
You are getting better every episode my brother!❤
It's different for sure lol
It's going to be SLICK when it's dun...😊
I enjoy your content . I am amazed at your patience and care that you put into doing your job correctly.keep up the good work there are not many people who could putout the quality of work that you do. You will always have work.
Thank you 🙏🏼
Hey slick, we need a P.O. box number so we can start sending you stuff. I'd like to donate some tig welding stuff furrick cups etc, and a few tools I like to use around the shop. We all helped puddin' and sent him stuff now its your turn. 😂
Haha. We will work on getting one setup. Thank you.
👍🏼👍🏼👍🏼🏁
New tshirts Idea Oklahoma speed and custom if that makes sense. Or just makes sense tshirt
You are a very good man Gregory.
An entertaining, educational, fun loving, hot rodding! Gotta love it.
Thanks Slick 50 for finally jumping into the RUclips world!
Glad to be here! We are also glad you are here Rex!
Fascinating. Slick good to see you on the tube, Buddy 🎉
Thanks for watching 🙏🏼🙏🏼
Great job 50. Really learned a lot today. This is going to be a good long run for you because you’ve created something. That’s fun educational and entertaining. Keep up the good work and don’t change.
South Australia 🇦🇺.. Cool 😎 as Slick 50 an boys..
Let's gooo!!
Thanks for the reply. You amaze me with your knowledge at such a young age. I've been around for over 70 years and have never seen such skills. Well done.
Thank you so much!!
Let's go slick 50 enjoy your shows
@@ovidiogarza4333 🙏🏼🙏🏼🙏🏼 Thank you so much!
Enjoying the channel . That door is a mess , can't wait to see you fix it .
Thank you Ronnie !
Love seeing Bill!!! He is my hero 😮😂
We love Bill!!
46:36 cool car. I like the fendered look.
Can't wait for t-shirts to come
🙏🏼🙏🏼🙏🏼
Your skill at joining metal and making the joint disappear is incredible! I've seen other car shows where the camera records about five seconds and then - presto, it's all done. Your detailed explanation and full length recording is SO HELPFUL to understand how the process works. I'm really enjoying this!
Thank you! Glad you enjoyed it!
Awesome attention to detail ‼️
Wow. The more you tear apart. The more needs tore out and fixed back to original. Rat Rod Bob is building on a 32 fiberglass hot rod. Always like to watch a good body guy work.
🙏🏼🙏🏼🙏🏼
Old school metal work at its finest.. Keep grinding Slick you’ll get there brother
Appreciate you James!
I really liked seeing the technical part of fixing and flattening the door skins. It was very educational. I'm really looking forward to seeing the rest of the repair on that three window.
Thank you! 🙏🏼
You can hear the sheet metal move. Good stuff from your neighbor in kansas.
Howdy 🤠
You do some scary stuff! But wow, the results are great. Enjoyed the video
Nice work Slick, Your saveing history.your work will last for years. THANK'S
Thank you Larry!
Love that slick you are wearing Puddin fab shop shirt. Bill needs to learn how to keep his fingers out of the way when he is filming. 😂
😂😂
What up Slick!!!!Puddin said to check out your channel!!!!just subbed🤟😎👍❤💯🇺🇸
More hot Rod stuff!!
Let's go!!
I like that you really take your time to get really clean results with your metal work. Slick. You could just clear over the bare metal, and it would look better than any paint job.
That would look cool!
@@OKspeedandcustom hell yeah, and talk about a good advertisement for your shop!
These are amazing skills put into this work, you can see how the previous work was all bubbly and full of cavities, but what Slick's done here is SOLID, and would stand up to any factory stamping or welding or even leadwork. Proper process, with good products, combined with taking your time and not skipping steps, is what will always give great results. As they say in music, practice does not make perfect, but perfect practice makes perfect!
Like the One on One feel of your channel. Keep them coming.
Will do 🫡
Like the education detail. More closeups at times might be nice (weld grinding).
Good idea! We are so new to filming and editing haha. We appreciate all input! 🙏🏼
Yo. We need a Bill cam 📷 Just some random clips of Bill's day 😂😂😂
I agree!!! Haha
That would be scarier then you think lol. You see those dogs on camera. Get that trim sir….
strap him up!
@SlickAll this time i thought you was just a wanna be body man But you just gained my respect You do know what your doing & your doing it correctly !
Appreciate you Jammer 😎
The attention to detail is great to watch, I love your work. Good informative video, loving the channel 👏
Thanks Dave!!
Let’s go!!!! OKSPEED & CUSTOM ROCKS!!! 🔥🔥🔥🔥🔥🔥🔥
Let's goo!! 😎
i hope these videos do well, i love this type of stuff
Thank you! We do too!
Great vid guys, cheers from Aus.
Wow! Cheers!
Slick, it's aweome that you do such good work. When body work is done correctly it will last and not fall apart. Glad you started your channel. Love the old hotrods.
Hot rods for life!!
Wow...that was a memory jog seeing the honeycomb rims on that bike in the background
🤙🏼
Slick does it the right way,body man fixes . Anyone can slap mud on the car, truck or whatever. Back in the 80s I took a body shop class Mr. Johnson , retired body man taught the class. Old skool , true body man fixes dents wrinkles,bent up panels, any one can slap mud on grind on metal make it look decent.
Thank you! 💪🏼
Liking the channel and your concept of work and doing right. I love the shop full of all the 32 model cars and the dragster kinda neat .
Thank you!
real nice work slick
Thank you! 🙏🏼
20:59 check out the mag wheel on the bike in the back. Awesome. Squirrel 😂
13:31 as someone who has never welded. Thanks for explaining why u do it the way you are. And not just welding and tada its done.
47:02 hell yeah we will take some c10 content.
I have built hot rods for many years and never needed a 9inc rearend. 8 inc are great and have never blew one up with 450 horse 😂😎
That's a lot of power! Thanks Bob! 😎
26:35 wow. Thats crazy that it is almost gone. Awesome work.
Getting comfortable in front of the camera I see. Good stuff!
Thank you!
3:42 man a few door closing from my wife and that sucker would have been in pieces. Good on you for seeing this and fixing it instead of covering it up.
Yes Yes , Malleable, do yer thing slick , lovin it
🙏🏼🙏🏼🙏🏼
Some of us are new to this kind of work, so maybe in the future you could explain what some of your special tools do -- like that flat spatula you used after the hammer. Also , please tell us why body men set the panel on that flimsy stand and let it bounce all over while you're hammering on it! Seems like you'd want the working surface to be well secured so you don't hit it wrong.
Thank you for your comment! The spatula looking thing is actually a body hammer called a slap hammer. The slap hammer has a larger footprint than a traditional body hammer. We will do a better job at explaining more of the tools used in future videos.🙏🏼
I love the Billfinger cam !
Hahaha
Keep up the great work. I love how you manipulate the metal. This is truly a lost art.
Thank you!!🙏🏼
I'm in line to buy an OK Speed shirt!
They are coming!!!
glad to be aboard
Slick Fitty, I mean no harm or ill will, but the videos with just you (including Bill) I enjoy more than anything. This was an excellent video! Keep them coming brother! You have MAD TALENT!
Thank you Robert! 😎
Slick 50 you got wild Bill working hard 👍👍
Somebody has to! Haha
Good to see Bill puting his 2bits in 😄.. you guys are doing good so far..entertaining 👍
Wild Bill is the best haha. Thank you!
Nice DA
Thanks 🙏🏼
Slick, thank you for sharing your skill and dedication with us. You are appreciated up here in Newfoundland and Labrador, Canada.
Canada!!! 💪🏼
I've only ever seen you on Puddins channel. I didn't know you did stuff lol
It's time to do stuff! 😎🙏🏼
Way to go slick glad to see you finally succumb to peer pressure. Wish you great success in your RUclips venture!!
Haha thanks!
Slick 50 is known world wide now. I'm watching from Warrensburg, Mo. Your work is top notch. I wouldn't hesitate to have you work on a vintage unit if I had one.
I can't wait, man, we gonna be here two years from now and y'alls channel is gonna be blown tf up.
Let's see what happens. We are grateful for all of you!
Love the content slick . looking forward to seeing more . Ps we are in Dunedin New Zealand
Wow! That's so cool!
@@OKspeedandcustom keep up the cool content
Love that bill is helping!!! ❤️
He is the man!!
Slick you are really talented. Watching you tackle that door was pretty sick. You have a ton of pride in your work and the steps you take to do things the right way. I see why you have a full shop. I’m glad this video was this content today. Also def looking forward to buffing the short wide. I have many years experience in buffing. But I learn something new every day so I can’t wait to see your process. Btw I want a “If that makes cents “ shirt with a hammer and dolly on it lol. That’s def how you make your 💵 and cents. I’m still begging Puddin for a Wang Dangle shirt. Or a Call Jim Alva shirt lol.
Thank you for watching and thanks for your comment! We will see what we can do! 😎
Nice work! Amazing how much hacking those old bodies got in 90+ years!
Haha that's a fact!!
Just keep on with what you you guys are doing 💯
Thank you 🙏🏼
Good job Slick 👌😎
Thank you!!
You do know your body work. Beautiful work!!!
Thank you Charlie 🙏🏼
Hearing protection man you need some.i really enjoy watching you and learning from you I'd bet puddin would tell you that too😅
Puddin is the man!! 💪🏼
Great job on that door Slick, thank you for explaining the hows and whys of what you were doing. I learned something new today.
Thank you Tom!!
Sometimes these videos give me hope for my project. Sometimes I get a bit overwhelmed 🧙♂️
We have your back if you have any questions! One step at a time! 😎
one step at a time Dadio! you can do it, just keep moving
I let go of my 32 pickup when I was a young man. Unfortunately, they are just out of my reach now. I do enjoy watching them be built.
Oh man, we need a 32 hotrod pickup!!
@OKspeedandcustom yeah, went through divorce at 24 and had to let it go. Life happens. Still love them. I think I paid $750 for the cab and doors back then. It was a deal. Love all the 32 fords but the pickup was my favorite. Didn't matter full body, with or without fenders, regular box, flatbed, heck even a fuel hualer. Just enjoy the look.
Greetings to all car lovers from Charlotte 😊
Wow!! Thank you! Glad you're here Steve!
Good to see you back on slick and it was good to see Bill on there
🫡
Awesome stuff, Slick can't wait till the next one
Thank Tracy!
I can tell I'm going to learn a lot on your channel. In the future I would like to see how you go about cutting out rust on fenders or quarter panels and then welding in patch panels.
We got you! We cut out plenty of rust around here.
you sir are an artist, job well done, you are a natural on camera.
Thank you!!
Nice to see some young blood doing things the right way, keep up the good work. V
you will make it right slick
9:16 The client of this '32 must be Count Von Frankenstein!
😂
Slick your gonna need a shop bigger then Puddin's soon I can see after folks get wind of this work being done you will be bombarded with work.
Appreciate you Trav!
One man can only do so much work....he'll take on the right customers...he has the skill to dictate....them...
Man that is a real labour of love. You have a good eye for it. Loving the channel.
Glad you're here Paul! 😎
Where did you learn to do fine metal finishing Slick it's becoming a lost art and to see someone as young as you are doing it is really cool
@@danielmurphy4023 background story coming soon! Thank you Daniel!
That is a ruff car Slick. They took it to the right Guy. Good to see a real craftsman doing the work the right way. 😎👌
It sure is ruff! Thank you!