Sherwood was one of Montgomery Ward's mail order brands. It was created just after WW2 and before WW2, the company used the names of Wards and Recording King for its instruments- the RK brand being more up-market than Wards. In the 1920s their brand was Concertone. On that basis, Wards branded guitars were mainly made by Kay while most of the RK instruments were made by Gibson. However, some of the Wards branded instruments were made by Gibson and the 1936 Wards Model 1642 mandolin was made by Gibson and was the same as the Gibson A50- except it did not have a neck truss rod. You can see that the Kluson tuners have rivets on the gears and date the guitar to just after WW2. The guitar appears to be based on the Kay 39 made from 1947-51. Montgomery Ward changed from the Sherwood brand to Airline at some point in the lae 50s or early 60s. Montgomery Ward retailed some very nice guitars and mandolins but also catered for the lower end of the market as well. This one is mid-market- Kay advertised their version at $45 while Wards would probably have sold it for less than $30- cutting out the middleman. As metal became scarce in WW2, Kluson, the tuner makers began to used rivets or just a blob of metal to replace the screws- and this is what you show. These tuners were used until the late 40s when screws returned and Kluson also started to enclose the gears in a little box.
I have an unbranded Kay that looks just like this guitar structurally speaking. The same reinforcement around the f holes and dot pattern on the frets.
In he early 70's, I reset the neck on my Harmony Sovereign, which now belongs to my son. It has been strung up and played ever since. Lately, he tells me that the action has reached the point of needing to be seen by a guitar tech. I used very similar methods to what you do.
I have a guitar that is this exact style (except natural finish) and about the same age I’d guess that needed a neck reset. I tried it once and failed; but I’ve got the neck off again and think I’ll be more successful this time now that I’ve been able to watch you. Wish me luck! Lol
Jerry. Each time you document the restoration of an instrument, you capture a gift of new life. What production is complete without music during the credits? When you sing and play the finished product at the end it celebrates the successful completion of your fine work. Plus, not only do we get to hear your very well-trained voice (which is always delightful) we get to hear the sweet, new sound of the instrument. There is no question here. Please, please play. It's like icing on the cake.
Hi Jerry, I am back taking a look at this reset. I am finishing up a reset on a friend's "51" Gretsch 5120 archtop jazz guitar. Well played, and fell off the wall and broke the neck joint before Covid started. He had dropped the guitar off for me to check out. I messed with it for hours. It was pretty loose but I couldn't get the neck to pop off. After a consult with a couple of guys, I found out that some nut job had pulled the fret out where you would normally get steam in, and he had driven 3 4p finish nails in the neck to hold it... Crazy. I used a thin crowbar to slowly pull the neck up with the nails.... Thank goodness there was no heavy glue on the nails. Now all cleaned up and ready to reset. Oddly enough, after I have sanded everything down and all the old glue from at least two resets and nail holes filled, The neck fits so tight it doesn't really need shims....! That puzzles me. I put a straight edge on all sides and it is tight as a drum dead-on down the fretboard and with the nut set to the bridge is also dead on!! Hmmm. I am going to glue it up with fresh hide glue in the neck day or so. Soaking glue today! Love the video here which gives me confidence that I will giterdone without issue!! Can't wait to play this beauty. I just finished a 64 Gretsch Country Gentlemen number 64064...! Just 2 numbers away from George Harrisons. I may buy it from the owner. What a player's guitar that is!!! Keep up these great videos my friend.
Hi Jerry, I just wanted to tell you, I've been watching you work for several years now, and think you do great work! I believe I'm just a couple years younger than you based on the info I've picked up watching your videos, so I can testify to the effort it takes to do what you do. I definitely believe, It really isn't easy being you. I know you randomly get trolls, or haters who leave smart remarks. I know you at times will try to head them off by explaining something your doing in more detail. Quite honestly, you dont need to explain yourself to those haters. Your work speaks for itself, and more importantly, someone who would spout out negative comments, without even knowing what the customer asked you to do, doesn't really deserve an explanation. Thank you for all of the great videos, and all of your hard work over the years.
I've been a guitar player and archtop lover for about 50 years, now, and I have never heard of Sherwood. It looks like an old Kay, I sure wouldn't be surprised, they built for a LOT of people over the years. LOVE those old guitars, especially once they are set up properly. Some of them sound GREAT. How fun to get to play one of those old babies! ETA: That guitar came out WONDERFULLY. I would not hesitate to play that on any gig where it would be appropriate. I have always loved those ones, used to have an Oahu that was a joy to play. Nothing like the old ones. Great job as always!!
Jerry I had a masonry business and general construction for about 35 years.... your comment rang true with me. Even though I did mostly new construction, there was an occasional remodel, and you absolutely never knew what you were getting into tearing into existing construction.. I learned early on to allow for that when bidding jobs. Great work as usual, I always look forward to your videos..
Doing my first neck reset to a 52-58 (they didn't date them back then)Harmony Hollywood. I can't count all of your videos I've seen but this one is most helpful for my present needs. Thanks so much Jerry for all you do.
I wish I had seen this before I did the same to my Silvertone. I ran into the same problems and having watched a number of your videos used the same techniques. Thanks for the education.
The dry heat stick with the neck removal jig works pretty well......and pretty quickly. I used it last on a Kay guitar in fact. I'm not sure how it would work with all glues, but with the Kay neck it worked very well.
For me Jerry, it's just not a Rosa repair video without a demo and a song. Thanks so much for your videos you have helped me understand my instruments and how to maintain them. I love Old Time and Bluegrass and you do it great !
Another precious set of strings beautifully returned to use for antiquity!! Thx Doc, love the refurb of the old ones and the repair of all!! Great job, hope your arthritis improves and you can continue with your work and the apprenticeship Caleb, God bless!
Another great vid of some really excellent work. Thank you Mr Rosa, and yes, I love the repairs where you play us a song at the end. The incidental music is lovely too.
I've used those heating sticks from stew Mac and they are 💯 % worth it they work very well for removing a neck and then you don't have to wait for the wood to dry out you can go right to work!! Get it you won't regret it !
Jerry I have been using Scotch bright red cut a couple of squares and screw on to your rotery tool that holds the small buffing wheel it works great thanks for the videos the know how is priceless thanks have a good 4th
Aloha Jerry, I watch and enjoy the playing after the repair, but if no one else watches whatever.... Don't go to all that work for just me. Thanks for sharing. I hope the hands get to feeling better, at 80 years old I can share your problem, I have never found a "fix", just being as hard headed as I can stand, was my answer. Mahalo Nui Loa and He pomaika`i 'ia mai ke Akua from Hawaii.
I use your videos to help with my repairs. I have my grandfather's sherwood deluxe looks very similar to this guitar as far as color and patina, the neck is very loose and the action is high, this video definitely will help me in doing a neck reset. Thank you for the videos
I just love the way you pay so much attention to detail like cutting out the dent and gluing in a patch. A wonderful repair/restoration as always and yes please play us a song!!
Awesome video. The amount of care you put into all the details was so nice to see. Gorgeous repair work. Guitar is definitely made by Kay (distinctive flat shoulders). The discoloration inside around the f-holes is from where they masked the holes before spraying and the tape was probably from the same.
Great job Jerry! I think rust removal is part of a good general cleaning. It's not a patina like the shade of lacquer turning yellowish brown over time. Plus, the brass frets did probably have a shine originally also. Outstanding job again! Thank you for having us over!
Jerry you are one of the best luthiers I have ever seen. Tons of patients, and particular. I believe you can do anything with wood, probably even make a wooden car, lol. I am one that doesn't like patina. When I do a restoration, I like to restore everything I can like new. Many folks, like the rust and all. Hey you like what you like, nothing wrong with it, it's just not me. The only thing Jerry is I would have liked to see you make a pick guard for it.
I for one am grateful for your programs, especially the time you take to videotape your processes and explain your concepts. God bless you, Jerry Rosa.
What a lovely old guitar, it has a lovely colour and burst. It will be an even greater pleasure to own for the customer with it's own unique history and appearance. Another wonderful job completed and it would be really nice to hear you play it thank you Jerry.
Good to see the old "F" hole being brought back to life. Reminds me of my first guitar and surprisingly sounds just like it. Thanks for the video Jerry.
It really is a nice piece of wood, isn't it? Love the bright streak at the 1st fret. I'm not sure, but it looks like a piece of cocobolo, which I suppose would have been seen as a lower priced version of Brazilian Rosewood. I don't know what the prices for those woods was back when this thing was built, but that's my guess.
@@zapa1pnt I've seen both ebony and rosewood fretboards with even deeper gouges in them. One of them right at the C on the B string first fret was down about 3/16" deep, really close to all the way through the fretb*ard. That was most likely not just the fingernails, but skin acidity, which can take a real toll on strings as well as wood. I had a teacher at Berklee who could ruin a set of strings in 3 chords. The combination of acidic sweat and fingernails can do a LOT of damage. Water is softer than rock, but look at the Grand Canyon. Regardless of wood, it could definitely have that or worse.
Love your work Jerry ! I want to thank you for sharing,What joy you bring to people's lives! You put some life back into that beautiful guitar... Please play,and sing Jerry !
Nice job. Not a “cost is no object” restoration but bought back to life in fine fashion! You make resetting the neck with all the correct angles look easy. I’m sure it takes some time to learn that skill. That guitar didn’t have much hardware but we would call that button screw, “the main screw”. Must have been left over from replacing the deck steps.
Wow. That fretboard looked great after you finished working on it. One of my favorite parts of your videos is watching you do fret board work. That tailpiece turned out great too!
This is so cool. I just found your page yesterday. I’m a beginner guitar player and I have started buying used guitars and cleaning them up a bit so I can play them and they look nicer than when k bought them. 😊
The "you could throw a dog through it" cracks me up! Ya know, I bought three songs from RSW and I'm impressed with the sound quality and the songs themselves! Price was $1.50 each or "whatever you think it's worth". Cracked me up again! I paid full list; well worth it!
Especially great watching you repair old guitars. Too bad you could't find an old pick guard to make it whole again, but that can be done anytime. Thanks again for another great video! I like them especially in these crazy days, makes me feel more centered.
Like many others here, I'd never heard/read of a 'Sherwood' guitar, but she deserves to be treated kindly, anyway. And, of course, as always, Jerry soothes her discomforts, and she looked a lot more sassy when she took to the dance floor, at the end. Arch top, f-hole guitars always have a specific sound to them...unique...some folks like 'em...some don't. They also respond totally differently to touch and nuance than other styles, but they're pretty dang keen, nonetheless. I worried mightily when I got my first glimpse of that scarred, glue-caked, shrapnel damaged neck joint...yikes. However, Dr. Rosa had her prepped, mended, stitched up, and prepared for action, in (nearly) no time. Thanks, Doc R...just listen to her now...and lawdy, take in them sweet curves.
Nice video! Once again I’m amazed by the skill, knowledge and attention to detail you apply to your repairs and restorations. I’ve never seen a Sherwood guitar before and a quick look on the internet informed me that they were made by the Kay company. That probably explains a lot USA built Kay guitars are pretty rare here in the UK . Keep up the good work, I look forward to your next video.
Jerry, I use the the "Heat Stick" from Stewmac and I love it. No moisture so you can actually work on heal the same day with out waiting for the wood to dry. Also no steam to ruin the finish..only thing is the hole is just a little bigger than the fret so you will have to so some filling. Another good thing is if you do miss the pocket (which im not going to lie I have missed it a few times😔. Not entirelymy fault, it was the way they were built.) but the heat radiates and finds itself in the pocket. I personally choose the heat stick over steam. My personal opinion. Good job on this instrument.
@Hutch Guitars my mistake then. Guess I should have said the ones I have worked on have been dowels with occasional mortise and tendon. Best of luck to you my friend
Great job! I'd love to see that with a pickguard having some swing rhythm played on it. Archtops really come alive when hit properly, they were intended to project in a big band setting!
That was fabulous. You are so correct about the patience factor, neck fit is everything on something like that guitar and it sounds great. Kudos as usual.
Jerry, you have some new chisels. I also missed you using the aluminium stock chisel with the finger plane blade that you made. You often use it to clean out old glue. Loved the neck reset. Great video, and yes, I love the songs on the completed guitars.
Nice job Jerry. Yes please to you playing a tune on it, after all it was you who made it into a playable instrument again. Blessings to you and thank you for your videos. X
I have a flat top Sherwood Deluxe acoustic from the late 1940s. The body is what several luthiers have classified as a super dreadnought - I had to have a custom case made for it. I have a Sherwood lap steel in my collection as well. BTW, the Sherwood brand was indeed manufactured by Kay.
Beautifully done: structurally and esthetically! Sounds good too! I own a few of these old non cutaway Archtops. I may venture into a cutaway into one.
After experiencing the "joy" of wire wheels, I've now gone to gray and maroon Scotch-brite wheels. In my experience they do a better job, faster, and way safer. Very nice rebuild, I learned a lot. Thumbs up (before watching) to crush a troll.
I really enjoy your videos. For me, a bit of a song and strum at the end would be the icing on the cake. Restoring a nice instrument is the reason for all the effort, after all. 😊🎸
A masterclass in neck reset decades of DNA removed and a lovely sound, how many times can this genius keep restoring what most people throw away.
Hey Dave.
Of course we'd like to hear you play it Jerry. It makes the story complete imo. 👍😊
Sherwood was one of Montgomery Ward's mail order brands. It was created just after WW2 and before WW2, the company used the names of Wards and Recording King for its instruments- the RK brand being more up-market than Wards. In the 1920s their brand was Concertone. On that basis, Wards branded guitars were mainly made by Kay while most of the RK instruments were made by Gibson. However, some of the Wards branded instruments were made by Gibson and the 1936 Wards Model 1642 mandolin was made by Gibson and was the same as the Gibson A50- except it did not have a neck truss rod. You can see that the Kluson tuners have rivets on the gears and date the guitar to just after WW2. The guitar appears to be based on the Kay 39 made from 1947-51. Montgomery Ward changed from the Sherwood brand to Airline at some point in the lae 50s or early 60s. Montgomery Ward retailed some very nice guitars and mandolins but also catered for the lower end of the market as well. This one is mid-market- Kay advertised their version at $45 while Wards would probably have sold it for less than $30- cutting out the middleman. As metal became scarce in WW2, Kluson, the tuner makers began to used rivets or just a blob of metal to replace the screws- and this is what you show. These tuners were used until the late 40s when screws returned and Kluson also started to enclose the gears in a little box.
That is some good knowledge. Can you tell me anything about the 'Pablo Camille Video' brand? I think it's a Gibson L1, no truss rod.
I have an unbranded Kay that looks just like this guitar structurally speaking. The same reinforcement around the f holes and dot pattern on the frets.
I don't think I've seen a better example of a sympathetic restoration, beautiful guitar, and great work Jerry.
Jerry I think its only right that you play the instrument,and sing a little after each one is completed,and you never cease to amaze me.
In he early 70's, I reset the neck on my Harmony Sovereign, which now belongs to my son. It has been strung up and played ever since. Lately, he tells me that the action has reached the point of needing to be seen by a guitar tech. I used very similar methods to what you do.
Hey, that was a 50 year repair. Good job! Who knew you'd still be alive now to even hear about it? And good on him for keeping it.
I have a guitar that is this exact style (except natural finish) and about the same age I’d guess that needed a neck reset. I tried it once and failed; but I’ve got the neck off again and think I’ll be more successful this time now that I’ve been able to watch you. Wish me luck! Lol
Jerry. Each time you document the restoration of an instrument, you capture a gift of new life. What production is complete without music during the credits? When you sing and play the finished product at the end it celebrates the successful completion of your fine work. Plus, not only do we get to hear your very well-trained voice (which is always delightful) we get to hear the sweet, new sound of the instrument. There is no question here. Please, please play. It's like icing on the cake.
Your work is even more amazing knowing the pain you suffer in your hands while doing these repairs Jerry!
best lutherie channel on youtube
Thank you very much.
I love it, but twoodfrd is the ultimate. I can love 2 at the same.time ;)
Hi Jerry, I am back taking a look at this reset. I am finishing up a reset on a friend's "51" Gretsch 5120 archtop jazz guitar. Well played, and fell off the wall and broke the neck joint before Covid started. He had dropped the guitar off for me to check out. I messed with it for hours. It was pretty loose but I couldn't get the neck to pop off. After a consult with a couple of guys, I found out that some nut job had pulled the fret out where you would normally get steam in, and he had driven 3 4p finish nails in the neck to hold it... Crazy. I used a thin crowbar to slowly pull the neck up with the nails.... Thank goodness there was no heavy glue on the nails. Now all cleaned up and ready to reset. Oddly enough, after I have sanded everything down and all the old glue from at least two resets and nail holes filled, The neck fits so tight it doesn't really need shims....! That puzzles me. I put a straight edge on all sides and it is tight as a drum dead-on down the fretboard and with the nut set to the bridge is also dead on!! Hmmm. I am going to glue it up with fresh hide glue in the neck day or so. Soaking glue today! Love the video here which gives me confidence that I will giterdone without issue!! Can't wait to play this beauty. I just finished a 64 Gretsch Country Gentlemen number 64064...! Just 2 numbers away from George Harrisons. I may buy it from the owner. What a player's guitar that is!!! Keep up these great videos my friend.
Mr Rosa just like all of us A little TLC goes along way jest like a song .
please play !!!!!!!! thank you
Sing away! Always fun to watch and listen to.
Hi Jerry, I just wanted to tell you, I've been watching you work for several years now, and think you do great work! I believe I'm just a couple years younger than you based on the info I've picked up watching your videos, so I can testify to the effort it takes to do what you do. I definitely believe, It really isn't easy being you. I know you randomly get trolls, or haters who leave smart remarks. I know you at times will try to head them off by explaining something your doing in more detail. Quite honestly, you dont need to explain yourself to those haters. Your work speaks for itself, and more importantly, someone who would spout out negative comments, without even knowing what the customer asked you to do, doesn't really deserve an explanation. Thank you for all of the great videos, and all of your hard work over the years.
I've been a guitar player and archtop lover for about 50 years, now, and I have never heard of Sherwood. It looks like an old Kay, I sure wouldn't be surprised, they built for a LOT of people over the years. LOVE those old guitars, especially once they are set up properly. Some of them sound GREAT. How fun to get to play one of those old babies!
ETA: That guitar came out WONDERFULLY. I would not hesitate to play that on any gig where it would be appropriate. I have always loved those ones, used to have an Oahu that was a joy to play. Nothing like the old ones. Great job as always!!
Jerry I had a masonry business and general construction for about 35 years.... your comment rang true with me. Even though I did mostly new construction, there was an occasional remodel, and you absolutely never knew what you were getting into tearing into existing construction.. I learned early on to allow for that when bidding jobs. Great work as usual, I always look forward to your videos..
I always enjoy hearing you play the finished instrument
You are an absolute artist . Your patience is amazing. The tedious tasks you blow right through sets you apart. If you could see me I would be bowing.
Amazing job on the neck reset Jerry. Really enjoyed this video.
Love hearing you sing! Thanks so much for sharing the process on this one!
Love your channel. Keep up the singing and playing wrap up, it puts the icing on the cake!
Makes my day watching you bring new life to cherished old friend instruments! Thanks for sharing Jerry!
Always pick and grin out a song I enjoy hearing good folk and blue grass music.
i
Doing my first neck reset to a 52-58 (they didn't date them back then)Harmony Hollywood. I can't count all of your videos I've seen but this one is most helpful for my present needs. Thanks so much Jerry for all you do.
I wish I had seen this before I did the same to my Silvertone. I ran into the same problems and having watched a number of your videos used the same techniques. Thanks for the education.
Great job. Love to hear you play them when you're done. Looking forward to your next video.
it does sound good! those archtops have a unique sound of their own. nice work and a lot of it. thanks for the mention brother!
The dry heat stick with the neck removal jig works pretty well......and pretty quickly. I used it last on a Kay guitar in fact. I'm not sure how it would work with all glues, but with the Kay neck it worked very well.
For me Jerry, it's just not a Rosa repair video without a demo and a song. Thanks so much for your videos you have helped me understand my instruments and how to maintain them. I love Old Time and Bluegrass and you do it great !
Jerry - DUUUUDE !! That neck turned out beautifully !! BRAVO !! Looks SOOOO GOOD !!
I really appreciate your videos and the work you do on those older instruments. Thank you.
I love how thorough you are. We should all strive for the care you take in our projects...
Another precious set of strings beautifully returned to use for antiquity!! Thx Doc, love the refurb of the old ones and the repair of all!! Great job, hope your arthritis improves and you can continue with your work and the apprenticeship Caleb, God bless!
Great job Jerry, the old girl will sing again. congratulations on your wedding anniversary. Peace and love from Bonny Scotland.
Great job Jerry!
I'm sure Spencer will be thrilled!
AND, it is always a pleasure to hear you play and sing!
Another great vid of some really excellent work. Thank you Mr Rosa, and yes, I love the repairs where you play us a song at the end. The incidental music is lovely too.
I've used those heating sticks from stew Mac and they are 💯 % worth it they work very well for removing a neck and then you don't have to wait for the wood to dry out you can go right to work!! Get it you won't regret it !
Jerry I have been using Scotch bright red cut a couple of squares and screw on to your rotery tool that holds the small buffing wheel it works great thanks for the videos the know how is priceless thanks have a good 4th
Aloha Jerry, I watch and enjoy the playing after the repair, but if no one else watches whatever.... Don't go to all that work for just me. Thanks for sharing. I hope the hands get to feeling better, at 80 years old I can share your problem, I have never found a "fix", just being as hard headed as I can stand, was my answer. Mahalo Nui Loa and He pomaika`i 'ia mai ke Akua from Hawaii.
I use your videos to help with my repairs. I have my grandfather's sherwood deluxe looks very similar to this guitar as far as color and patina, the neck is very loose and the action is high, this video definitely will help me in doing a neck reset. Thank you for the videos
I just love the way you pay so much attention to detail like cutting out the dent and gluing in a patch. A wonderful repair/restoration as always and yes please play us a song!!
Awesome video. The amount of care you put into all the details was so nice to see. Gorgeous repair work. Guitar is definitely made by Kay (distinctive flat shoulders). The discoloration inside around the f-holes is from where they masked the holes before spraying and the tape was probably from the same.
Great job Jerry! I think rust removal is part of a good general cleaning. It's not a patina like the shade of lacquer turning yellowish brown over time. Plus, the brass frets did probably have a shine originally also. Outstanding job again! Thank you for having us over!
Jerry you are one of the best luthiers I have ever seen. Tons of patients, and particular. I believe you can do anything with wood, probably even make a wooden car, lol. I am one that doesn't like patina. When I do a restoration, I like to restore everything I can like new. Many folks, like the rust and all. Hey you like what you like, nothing wrong with it, it's just not me. The only thing Jerry is I would have liked to see you make a pick guard for it.
I for one am grateful for your programs, especially the time you take to videotape your processes and explain your concepts. God bless you, Jerry Rosa.
What a lovely old guitar, it has a lovely colour and burst.
It will be an even greater pleasure to own for the customer with it's own unique history and appearance.
Another wonderful job completed and it would be really nice to hear you play it thank you Jerry.
Good to see the old "F" hole being brought back to life. Reminds me of my first guitar and surprisingly sounds just like it. Thanks for the video Jerry.
Always enjoy watching you work on the instruments and maybe hear you play.
It may just be me but I think that may be one of the prettiest fingerboards I’ve seen. Even the gouges gave it character. Great job Jerry.
It really is a nice piece of wood, isn't it? Love the bright streak at the 1st fret. I'm not sure, but it looks like a piece of cocobolo, which I suppose would have been seen as a lower priced version of Brazilian Rosewood. I don't know what the prices for those woods was back when this thing was built, but that's my guess.
If that was Cocobolo, I don't think it would have the fingernail gouges, as it does, even at it's apparent age.
@@zapa1pnt I've seen both ebony and rosewood fretboards with even deeper gouges in them. One of them right at the C on the B string first fret was down about 3/16" deep, really close to all the way through the fretb*ard. That was most likely not just the fingernails, but skin acidity, which can take a real toll on strings as well as wood. I had a teacher at Berklee who could ruin a set of strings in 3 chords. The combination of acidic sweat and fingernails can do a LOT of damage. Water is softer than rock, but look at the Grand Canyon. Regardless of wood, it could definitely have that or worse.
Thank you for posting as always Jerry, your thorough, and honest nature of working on these prized instruments is worth the subscription in itself.
I don`t comment a lot but I watch a lot of your work and you sir are a master
Jerry, could you please do a song? One of your original tunes would be great ! Very fine finish on a nice looking arch top. Great work !
Love your work Jerry ! I want to thank you for sharing,What joy you bring to people's lives! You put some life back into that beautiful guitar... Please play,and sing Jerry !
WOW! The guitar looks beautiful. You've done a great service to that ol' guitar.
I always enjoy the songs you play after the repair.
I always like to hear the instrument being played at the end. It is the purpose of all the work, of course.
Nice work.You make neck resets look so simple...ha ha .Keep the videos a coming.Thanks for sharing.
Nice job. Not a “cost is no object” restoration but bought back to life in fine fashion! You make resetting the neck with all the correct angles look easy. I’m sure it takes some time to learn that skill. That guitar didn’t have much hardware but we would call that button screw, “the main screw”. Must have been left over from replacing the deck steps.
Jerry that was one nice job, 51minuts of my time well spent. Liked how you used the neck slot to clamp the shims, great video Cheers.
Went from an old looking worn out thing to a really nice looking and sounding instrument. I’d love to have that guitar
Great job
Fret grooves give the guitar character. I love the grooves
Wow. That fretboard looked great after you finished working on it. One of my favorite parts of your videos is watching you do fret board work. That tailpiece turned out great too!
Always a joy to watch you work!
This is so cool. I just found your page yesterday. I’m a beginner guitar player and I have started buying used guitars and cleaning them up a bit so I can play them and they look nicer than when k bought them. 😊
The "you could throw a dog through it" cracks me up! Ya know, I bought three songs from RSW and I'm impressed with the sound quality and the songs themselves! Price was $1.50 each or "whatever you think it's worth". Cracked me up again! I paid full list; well worth it!
Especially great watching you repair old guitars. Too bad you could't find an old pick guard to make it whole again, but that can be done anytime. Thanks again for another great video! I like them especially in these crazy days, makes me feel more centered.
Nice work Jerry, that guitar has a really nice sound. I would love to hear a song played on it.
nice fix it is so much tighter and better on the neck angle. The parts cleaned up good too. Yes play it a little for us. I always watch them.
Just amazing work Mr Rosa. That guitar is beautiful, and sounds amazing. Love your work!
I'm catching up quick Jerry, .........Exit, stage left........Gone to the song video!! Thanks Jerry!
I always enjoy hearing you play the finished instruments Jerry. Great job.
Great job buddy, love seeing the oldies rejuvenated. respect and stay safe to be well all.
Like many others here, I'd never heard/read of a 'Sherwood' guitar, but she deserves to be treated kindly, anyway. And, of course, as always, Jerry soothes her discomforts, and she looked a lot more sassy when she took to the dance floor, at the end. Arch top, f-hole guitars always have a specific sound to them...unique...some folks like 'em...some don't. They also respond totally differently to touch and nuance than other styles, but they're pretty dang keen, nonetheless. I worried mightily when I got my first glimpse of that scarred, glue-caked, shrapnel damaged neck joint...yikes. However, Dr. Rosa had her prepped, mended, stitched up, and prepared for action, in (nearly) no time. Thanks, Doc R...just listen to her now...and lawdy, take in them sweet curves.
Nice video! Once again I’m amazed by the skill, knowledge and attention to detail you apply to your repairs and restorations. I’ve never seen a Sherwood guitar before and a quick look on the internet informed me that they were made by the Kay company. That probably explains a lot USA built Kay guitars are pretty rare here in the UK . Keep up the good work, I look forward to your next video.
Jerry, I use the the "Heat Stick" from Stewmac and I love it. No moisture so you can actually work on heal the same day with out waiting for the wood to dry. Also no steam to ruin the finish..only thing is the hole is just a little bigger than the fret so you will have to so some filling. Another good thing is if you do miss the pocket (which im not going to lie I have missed it a few times😔. Not entirelymy fault, it was the way they were built.) but the heat radiates and finds itself in the pocket. I personally choose the heat stick over steam. My personal opinion. Good job on this instrument.
I tried it on a Yamaha and after 2 hours, the neck would not come out.
@Hutch Guitars Yamaha doesn't use a dove tail joint. Most imports use a dowels to secure the neck
@@maheshchander03 the 2 I've worked on had dovetails.
@Hutch Guitars my mistake then. Guess I should have said the ones I have worked on have been dowels with occasional mortise and tendon. Best of luck to you my friend
You and 10,000 other peeps. Thank U Spencer. I love mandolin, Thailand Paul
Great job! I'd love to see that with a pickguard having some swing rhythm played on it. Archtops really come alive when hit properly, they were intended to project in a big band setting!
Your caution on the wire wheel is 100% accurate. Signed the voice of experience. Guitar looks like it turned out " Oh Kay".
Just the right amount of tlc for this old baby..awesome
That was fabulous. You are so correct about the patience factor, neck fit is everything on something like that guitar and it sounds great. Kudos as usual.
Wonderful work. I love those hollow bodies. Obviously there’s no truss rod so it’s quite remarkable that it stayed so true.
Jerry, you have some new chisels. I also missed you using the aluminium stock chisel with the finger plane blade that you made. You often use it to clean out old glue. Loved the neck reset. Great video, and yes, I love the songs on the completed guitars.
thanks for the video!always like to hear you play and sing do it !
wow great job. sounds really nice..a really nice old guitar with lots of life left....tks for sharing..
Nice job Jerry. Yes please to you playing a tune on it, after all it was you who made it into a playable instrument again. Blessings to you and thank you for your videos. X
I have a flat top Sherwood Deluxe acoustic from the late 1940s. The body is what several luthiers have classified as a super dreadnought - I had to have a custom case made for it. I have a Sherwood lap steel in my collection as well. BTW, the Sherwood brand was indeed manufactured by Kay.
I love your short demo songs after you fix an instrument.
It's always nice to hear you play and sing with the finished guitar. "In my opinion" 👍
That guitar tuned out very nice. Please more playing and singing!
Beautifully done: structurally and esthetically! Sounds good too! I own a few of these old non cutaway Archtops. I may venture into a cutaway into one.
hey thanks for the mention man! I must have missed this video when it was posted, yt only notifies me about half the time lol
After experiencing the "joy" of wire wheels, I've now gone to gray and maroon Scotch-brite wheels. In my experience they do a better job, faster, and way safer. Very nice rebuild, I learned a lot. Thumbs up (before watching) to crush a troll.
Another good watch....Always welcome a tune from the rebuild.
I love your songs! It shows off the instrument; like a coda in a song, it brings closure too. 🤗
Jerry you are Brilliant! Love your work.
Some great repairs as usual Jerry. Keep up the good videos.
Great job. Looks and sounds good. Thank you.
I really enjoy your videos. For me, a bit of a song and strum at the end would be the icing on the cake. Restoring a nice instrument is the reason for all the effort, after all. 😊🎸
Another great Job! Love these....and yes on the song sir!
Thanks I learned a lot about resetting the neck 0n my 43 Silvertone almost the same Thanks