Thanks for the honest review Trad-Man! Honestly I'm not surprised this problem is happening due to the materials and price. If they used high tension fabric, like is used for a hang glider or sail boat, the gunslinger would cost easily over $300. The concept is still great but definitely needs reworking for better longevity.
We have 4 Gunslingers. I think they are far superior to a plastic boab. However, the first one had the loose stitching problem but I got that fixed. A few phone calls and I found a shoe repair shop that threw in a stitch for free. It took about 2 min in the store. One we got recently has the leak problem. It seems to be somewhere in the bottom inch or two. Reach-it has responded to my request for help but no action has been taken yet. And I do think it is over priced. But a boab made with a single piece of plastic injection molding is also over priced. And, as others stated, the belt loop was always ripping away from the plastic boab. So looking at two imperfect overpriced designs I’ll take the gunslinger everytime.
We have ordered 5 of these for our company. So far we had two with stitching coming apart where it attaches to the belt. We were sent two new ones. So far no leaking issues.
I’ve received my on June 5th 2018 I ordered 3 of them and they all have been just fine no problems as of yet No dripping or wet leg I’m loving my gunslingers I’m happy I don’t have to use the old style bucket on a belt anymore too many issues with those good update 👍🏻
Glad your one is ok 👍🏻 Problem was that it wasn't consistent. Loads of people had issues with it leaking and falling apart. You must of been one of the lucky ones that got a unit that was sewn together a little better. 👍🏻
I’d love to see another manufacturer pick up Richie’s design. My first one had to be replaced because of stitching and the color faded after two months. I expect the same issues with the new one. For the cost, I expect much better quality. I had to pay shipping costs for my replacement too, so I’m into the Gunslinger for around $150 now. I doubt I’ll be sending Reach-It any more of my money.
THANK YOU TRAD-MAN!!! Usually REACH-IT has to start a RECALL ACTION, but they try to SWEEP IT UNDER THE CARPET!!! So shame on REACH-IT and again RESPECT to Your indication....and HAPPY NEW YEAR!!! P.S. Maybe REACH-IT has to "google" FINAL CHECK?
Reach-it is a Chinese company, all their stuff is made in china and although I like the ideas behind their products it fails alot, been buying their wfp systems and brushes and by the time they fail the model is discontinued and they come out with a new model. They tell you to buy the new one. Go with Tucker or Unger for all your tools.
i did get one and got to try it out this year and was really unhappy cuz i was so excited about it. but i can see why i got it.. the silencer added a pouch so you can put the squeegee on the outside. i really dont like the backwards stuff cuz it gives me a huge headache lol.
By publicizing some of these concerns on social media, these manufactures and distributors may feel obligated to fix these concerns. I feel that that 90% of the window cleaning industry is unprofessional. You would think that window cleaning manufacturers and window cleaning distributors would lead my example. We have many other great industries that make improvements with their tools and/or customer service and product warranties/guarantees. That’s why I’m very picky with what distributors I shop with or what manufactures tools I stand behind 100%.😊
Looks like I'm a few years late here but have they fixed the quality of is it still the same? would it hold up longer if it just held squeegees and not an applicator? Greetings from Canada eh!
I havehad issues with the last 2 ive received. Very obvious they are doing no quality control, because of the fact they for some reason changed the design to a worse case scenario to where its leaking down the front. My original reach it gunslinger is now reshaping itself like the henry holster does. Which is causing a splash out the front of tipjar. Thank god I have 2 original prototypes to fall back on. Its very unfortunate that they cant get this squared. Was told 3 weekes ago id be getting a replacement with qc done by Perry himself. Still no Gunslinger. Im guessing i probably wont receive it lol.
Yeah it's a real shame, there is something seriously going wrong, wether it's substandard materials, or unqualified people putting them together, maybe both but whatever the case that's the reputation of a promising product being ruined
I won't be giving reach it anymore money, they produce cheap made materials at a premium price, hence why no supplier over here will touch reach it products with a barge pole. Think I'll save my money and see what maykker products brings out over in the USA
If you check the stiching closely you may see signs of it fraying or being loose. My one you could pull the stitches out with your fingers because it was not stitched tightly enough. I hope you got one of the better ones pal! 👍🧔
I have an original design and its held up well...it is getting worn where my squeegee sits and the belt loop edges are worn but still very strong structurally. I agree the materials used are very cheap...I dont care for the pleather they use. I have seen a lot of people saying the newer version leaks. I think I'm very fortunate to have the earliest model...I pray they resolve these issues and possibly use better materials in the 2.0 model or I may need to switch to something else too. Thank you for your honest review. Perry's customer service is second to none but it really must be paired with a high quality product as well.
That was the samurai boab. It was only suited for some squeegees, when it came to moerman tools they wouldn't stay in, always fell out and left indents in the rubber. The moerman blue boab is the best there is really at the moment. The gunslinger would have been good but the issues in recent times with the quality have let it down.
I'm feeling let down by it aswell. For me even the way it was advertised was wrong. Dont know about anybody else but I like to carry 3 liquidators. The gunslinger advertised u could carry about 10 squeegees. Well if u work up a ladder even carrying 2 in the main slot is awkward because of the way they sit. Had an issue where I was getting a little mark on my squeegee which yeah eventually went away but that adds time onto every window. Also needing that sponge now means it's actually stopping me using any squeegee bigger than a 16. Biggest problem though is build quality. Half the stitching on the front holster has broken away and needs repaired. Not what I expected from a £115 product after 1 month. An email will be going reach its way to find a solution.
@@TradMan yeah looks like it. Before I seen this video I thought I was just unlucky lol. I did have a bad feeling when reach it sent me my tracking number and it was coming from china
Hi trad man Sorry to go off point but I’ve just purchased the morman combinator and not sure wether to send it back or not before I use it What do you recommend does it work and is there no detailing Would really appreciate your opinion on this tool Thanks trad man and keep up the good work
Hello :) Personally i would get the excelerator rather than the combinator. The excelerator does a lot more The combinator is a fixed handle whereas the excelerator has 3 angle options and the choice between swivel or fixed mode so its far superior! Hope that helps
My Gunslinger took about 5 months for the stitching to break free. I loved it, but until Reachit starts making this thing with quality materials and workmanship, the boab will likely be my holster
I thought there may have been a problem after Ritchie's last RUclips video which I feel is sad because he's a nice chap with a good idea for the product I held off because if the price I've heard reach it had problems with previous products like clamps on the mini and while they seem helpful in they're fixes it's frustrating when these things happen I've also had moerman products go bad so what is happening to these companies ? Where are they getting these made and like you said they're not cheap these products we spend our hard earned out of interest always had quality from unger and ettore ( the buckets would break but eventually)
Nothing is ever gonna be 100% perfect 100% of the time but in regards to the Gunslinger, i hear more and more everyday of failed units that people either contact reachit or they go get it repaired themselves. Not good
@@TradMan I get a quantity over quality feel with reach it unfortunately though I talked to guys that like the gear I just get a dodgy vibe not from Ritchie I really like the idea of the gunslinger but at that price you expect more thanks for giving us the drop and not covering over it this was my next purchase maybe I'll wait to see how it goes
I have two that work with no issues and both are sec generation slingers. No leaks no splashing and able to hold reg squeegee/multi-tools with them never fallings out even adding in two mops. The Slinger is still the best BOAB I.M.O. and that could because I don't have issues But if its hit and miss that's not on the Design end that goes to Quality Control. And with every Window Cleaning Tool company, they all need to step up and work better for us. Goes for Moerman Unger Ettore etc. Without us, you won't be here.
Goddammit!!! I've been umming and ahhing about buying a couple gunslingers for the past few months. I finally bit the bullet and purchased them for me and my employee. I hope I haven't wasted my money.
@@TradMan stuff like that will live bad aftertaste gunslinger and samurai are new design that is not cheap that's way it should have really good quality I hope they will mean it better
Reach-it is a Chinese company, all their stuff is made in china and although I like the ideas behind their products it fails alot, been buying their wfp systems and brushes and by the time they fail the model is discontinued and they come out with a new model. They tell you to buy the new one. Go with Tucker or Unger for all your tools.
Trad - Man I never said I didn’t like the Moerman product. I shouldn’t have to use paper clips to keep rubber from slipping out of the excelerator. I don’t have this problem with other floating rubber tools or friction tools. It doesn’t matter the cost of expectations. It should work as described or meant to be. 😊
J W Agrred, I have suggested as well as others for moerman to make inserts like unger to hold rubber thats a smaller sized bulb. If you use Ettore rubber in the liquidator you dont really need the inserts as its a tight fit, but with pulex and moerman rubber you need something to hold the rubber tighter. Everyone assumes rubber is the same sizes but thats not the case so not all rubbers will have the same results in the channel. But that being said there should be official inserts that come with the tool so if use do use a rubber with a smaller size you can just use the clips like many squeegees use.
motto775 Any handle that has teeth on it similar to Unger ergo tech handles. Ettore makes a kit you can add to your handles, but some ettore handles may come with the teeth. In other terms it’s a floating rubber, meant for light handed users. Then you have friction channels, that is held in by a pinched channel. The excelerator handle with a liquidator channel uses both teeth and friction. Wagtail uses friction channels that pinch in the center. Most circumstances: floating rubber = light handed users. Clipped channels = heavy handed users, with the exception of plastic ended channels. Hope this makes sense. 😊
Took me 10 minutes to re stitch the belt loop on mine. I'd buy a new one Evey year if I had to. I did hear that customer service sucks. Still think it's the best one out there for keeping my leg dry, holding combo tools and not rattling like crap.
For over $100 you shouldn't need to stitch anything and for that price no way I'm buying one every year. Mine didn't last 4 months. Junk. Thanks for watching
The reach it BOAb is simply too bulky..... The only viable. usage is. possibly. for ladder work.. Problem is. the weight of the water and all of the tools will make. you cuss. because your belt. will feel heavy. especially in hot weather.. and you will have to tighten the belt. even more. which will pee you off....Unger Ninja or any left and right dual hand. BOAB will be a better choice ! imo
I’ve been working with a wide range of reach it’s products, representing tens of thousands of hours now from about 15 people, and we’ve got such a “love, hate” relationship with their products. I’ve had WF brushes crumble and break apart, BOAB’s tear, leak, screws and rivets come undone. The consensus isn’t great. I respect and appreciate the aim to give that top of the line product, but despite charging the price for it, I, we have felt really disappointed from Reach It. A new problem that I personally am running into, is that some of the materials inside my BOAB are beginning to fray and are causing my squeegee rubbers to wear out very quickly in the middle of the channel. Less than 1 year on current reach it BOAB.
But then he'd have to cut into his profit$ to satisfy customers. That would only be a strategy for any company that was planning to stay in business for years and build up a solid reputation
You know me, I give folks the truth of what has happened with my equipment, even if it gets a good review to start doesn't mean it will stay that way. The GS let me down twice and there are many people having issues with it. Shame really
That’s the American way ironically he’s not even American nor are they made in America but mediocre product at a higher price all the savings directed into advertising convincing you it’s the best
Iv had mine 6 months and use every day and it's still good but I don't think it's something that will last year's,but I love it
Thanks for the honest review Trad-Man!
Honestly I'm not surprised this problem is happening due to the materials and price. If they used high tension fabric, like is used for a hang glider or sail boat, the gunslinger would cost easily over $300. The concept is still great but definitely needs reworking for better longevity.
No probs
Yeah back to the drawing board for the GS
We have 4 Gunslingers. I think they are far superior to a plastic boab. However, the first one had the loose stitching problem but I got that fixed. A few phone calls and I found a shoe repair shop that threw in a stitch for free. It took about 2 min in the store. One we got recently has the leak problem. It seems to be somewhere in the bottom inch or two. Reach-it has responded to my request for help but no action has been taken yet.
And I do think it is over priced. But a boab made with a single piece of plastic injection molding is also over priced. And, as others stated, the belt loop was always ripping away from the plastic boab. So looking at two imperfect overpriced designs I’ll take the gunslinger everytime.
We have ordered 5 of these for our company. So far we had two with stitching coming apart where it attaches to the belt. We were sent two new ones. So far no leaking issues.
I hope yours works ok ;)
I’ve received my on June 5th 2018 I ordered 3 of them and they all have been just fine no problems as of yet No dripping or wet leg I’m loving my gunslingers I’m happy I don’t have to use the old style bucket on a belt anymore too many issues with those good update 👍🏻
Yeah some folks get better made ones it seems.
Glad your ones are ok!
The Samurai hip bucket is a fine BOAB. Mine is awesome, and quite modular for route and home.
Glad your one is ok 👍🏻
Problem was that it wasn't consistent. Loads of people had issues with it leaking and falling apart. You must of been one of the lucky ones that got a unit that was sewn together a little better. 👍🏻
I’d love to see another manufacturer pick up Richie’s design. My first one had to be replaced because of stitching and the color faded after two months. I expect the same issues with the new one. For the cost, I expect much better quality. I had to pay shipping costs for my replacement too, so I’m into the Gunslinger for around $150 now. I doubt I’ll be sending Reach-It any more of my money.
I'm hearing this kinda thing more and more, it's disappointing.
Thanks for tuning in!
Yup reach-it sucks! they wont compensate you on their failed products, and their brushes and BOABs DO fail!
Yeah they won't last long producing rubbish
Have had my original bucket on a belt for over ten years still going strong as the saying goes " if it ain't broke don't fix it"
THANK YOU TRAD-MAN!!! Usually REACH-IT has to start a RECALL ACTION, but they try to SWEEP IT UNDER THE CARPET!!!
So shame on REACH-IT and again RESPECT to Your indication....and HAPPY NEW YEAR!!!
P.S. Maybe REACH-IT has to "google" FINAL CHECK?
Let's hope they sort it.
Thank you for your continued support!
👍👍🧔
Reach-it is a Chinese company, all their stuff is made in china and although I like the ideas behind their products it fails alot, been buying their wfp systems and brushes and by the time they fail the model is discontinued and they come out with a new model. They tell you to buy the new one. Go with Tucker or Unger for all your tools.
i did get one and got to try it out this year and was really unhappy cuz i was so excited about it. but i can see why i got it.. the silencer added a pouch so you can put the squeegee on the outside. i really dont like the backwards stuff cuz it gives me a huge headache lol.
Stitching coming apart on mine as well. Less than thrilled. I don't have time to screw around trying to return it
Did you email reach it?
By publicizing some of these concerns on social media, these manufactures and distributors may feel obligated to fix these concerns. I feel that that 90% of the window cleaning industry is unprofessional. You would think that window cleaning manufacturers and window cleaning distributors would lead my example. We have many other great industries that make improvements with their tools and/or customer service and product warranties/guarantees. That’s why I’m very picky with what distributors I shop with or what manufactures tools I stand behind 100%.😊
Looks like I'm a few years late here but have they fixed the quality of is it still the same? would it hold up longer if it just held squeegees and not an applicator?
Greetings from Canada eh!
If its made by reach it, it will probably fall apart full stop. They are renowned for poor quality products
@@TradMan That's a shame!
Window cleaning resource in the USA make a better quality version called the Xero silencer. It's more expensive but made from high quality materials
I havehad issues with the last 2 ive received. Very obvious they are doing no quality control, because of the fact they for some reason changed the design to a worse case scenario to where its leaking down the front. My original reach it gunslinger is now reshaping itself like the henry holster does. Which is causing a splash out the front of tipjar. Thank god I have 2 original prototypes to fall back on. Its very unfortunate that they cant get this squared. Was told 3 weekes ago id be getting a replacement with qc done by Perry himself. Still no Gunslinger. Im guessing i probably wont receive it lol.
Yeah it's a real shame, there is something seriously going wrong, wether it's substandard materials, or unqualified people putting them together, maybe both but whatever the case that's the reputation of a promising product being ruined
Spend the extra money and get the ones with PVC. I got one and I love it and i see it lasting awhile.
I won't be giving reach it anymore money, they produce cheap made materials at a premium price, hence why no supplier over here will touch reach it products with a barge pole. Think I'll save my money and see what maykker products brings out over in the USA
I’ve got one about three months ago and it’s holding up okay at the minute but I don’t think it will last long term.
If you check the stiching closely you may see signs of it fraying or being loose. My one you could pull the stitches out with your fingers because it was not stitched tightly enough.
I hope you got one of the better ones pal!
👍🧔
I have an original design and its held up well...it is getting worn where my squeegee sits and the belt loop edges are worn but still very strong structurally. I agree the materials used are very cheap...I dont care for the pleather they use. I have seen a lot of people saying the newer version leaks. I think I'm very fortunate to have the earliest model...I pray they resolve these issues and possibly use better materials in the 2.0 model or I may need to switch to something else too. Thank you for your honest review. Perry's customer service is second to none but it really must be paired with a high quality product as well.
Totally agree
I use the blue morman bob it the only product of theirs I like. What about the black bob you was reviewing a little while ago do you not use that
That was the samurai boab. It was only suited for some squeegees, when it came to moerman tools they wouldn't stay in, always fell out and left indents in the rubber. The moerman blue boab is the best there is really at the moment. The gunslinger would have been good but the issues in recent times with the quality have let it down.
lol! i ended up pausing it when you showed the stitching and when i unpaused it i couldnt figure out why the video wouldnt play lol
I'm feeling let down by it aswell. For me even the way it was advertised was wrong. Dont know about anybody else but I like to carry 3 liquidators. The gunslinger advertised u could carry about 10 squeegees. Well if u work up a ladder even carrying 2 in the main slot is awkward because of the way they sit. Had an issue where I was getting a little mark on my squeegee which yeah eventually went away but that adds time onto every window. Also needing that sponge now means it's actually stopping me using any squeegee bigger than a 16. Biggest problem though is build quality. Half the stitching on the front holster has broken away and needs repaired. Not what I expected from a £115 product after 1 month. An email will be going reach its way to find a solution.
Yeah it's affecting more people than I think the company realises. I'm hoping this video will help prompt them to take drastic action to fix it
@@TradMan yeah looks like it. Before I seen this video I thought I was just unlucky lol. I did have a bad feeling when reach it sent me my tracking number and it was coming from china
Hi trad man
Sorry to go off point but I’ve just purchased the morman combinator and not sure wether to send it back or not before I use it
What do you recommend does it work and is there no detailing
Would really appreciate your opinion on this tool
Thanks trad man and keep up the good work
Hello :)
Personally i would get the excelerator rather than the combinator.
The excelerator does a lot more
The combinator is a fixed handle whereas the excelerator has 3 angle options and the choice between swivel or fixed mode so its far superior!
Hope that helps
Trad - Man
Thanks for the advice
Sure thing, I used the combinator before the excelerator was around but now the combinator lives in a box
My Gunslinger took about 5 months for the stitching to break free. I loved it, but until Reachit starts making this thing with quality materials and workmanship, the boab will likely be my holster
Or a good pair of slippers!
I thought there may have been a problem after Ritchie's last RUclips video which I feel is sad because he's a nice chap with a good idea for the product I held off because if the price I've heard reach it had problems with previous products like clamps on the mini and while they seem helpful in they're fixes it's frustrating when these things happen I've also had moerman products go bad so what is happening to these companies ? Where are they getting these made and like you said they're not cheap these products we spend our hard earned out of interest always had quality from unger and ettore ( the buckets would break but eventually)
Nothing is ever gonna be 100% perfect 100% of the time but in regards to the Gunslinger, i hear more and more everyday of failed units that people either contact reachit or they go get it repaired themselves. Not good
@@TradMan I get a quantity over quality feel with reach it unfortunately though I talked to guys that like the gear I just get a dodgy vibe not from Ritchie I really like the idea of the gunslinger but at that price you expect more thanks for giving us the drop and not covering over it this was my next purchase maybe I'll wait to see how it goes
@@nathanhodges6743 i will always report what happens good or bad, but always the truth ;)
I have two that work with no issues and both are sec generation slingers. No leaks no splashing and able to hold reg squeegee/multi-tools with them never fallings out even adding in two mops. The Slinger is still the best BOAB I.M.O. and that could because I don't have issues But if its hit and miss that's not on the Design end that goes to Quality Control. And with every Window Cleaning Tool company, they all need to step up and work better for us. Goes for Moerman Unger Ettore etc. Without us, you won't be here.
Goddammit!!! I've been umming and ahhing about buying a couple gunslingers for the past few months. I finally bit the bullet and purchased them for me and my employee. I hope I haven't wasted my money.
You will get refunded if it fails
Yeah some units are ok, some fail. For the price very few should be failing though
@echosixnoble sure is
@@TradMan that's good to know.
That's what this RUclips channel is for, honest information, good or bad 👍👍🧔
It shows that quality is very important short cuts not Always work
Yeah dude, cutting corners is not cool for a premium product.
@@TradMan stuff like that will live bad aftertaste gunslinger and samurai are new design that is not cheap that's way it should have really good quality I hope they will mean it better
Yeah hopefully
I'm glad I didn't order one hope they sort it for you Peter 👍
Ive been refunded tom so I’m good, I’m just disappointed in the product
Hey Trad-Man. Sorry to hear this happened to you.
It's a shame but that's life, not everything lives up to expectations
Reach-it is a Chinese company, all their stuff is made in china and although I like the ideas behind their products it fails alot, been buying their wfp systems and brushes and by the time they fail the model is discontinued and they come out with a new model. They tell you to buy the new one. Go with Tucker or Unger for all your tools.
Good advice
I love my gunslinger . I use it 6 days a week for year now no issues it's like new. I abuse mine .
I have been using mine for 10 months and still working really good
Good to know. They look really good but if they aren’t working properly it’s a lot of money to spend 🤔
Your right there!
one hours work is alot of money?
The TRAD Man!!!
Yo dude!!
Mine leaks too, it’s never been resolved by Perry or Ritchie. Sounds like Moerman......they want you to duct tape their products. 😊
Which product do you not like from moerman buddy?
Not all products from a company will be good but if it's expensive it should be better than it is
Trad - Man I never said I didn’t like the Moerman product. I shouldn’t have to use paper clips to keep rubber from slipping out of the excelerator. I don’t have this problem with other floating rubber tools or friction tools. It doesn’t matter the cost of expectations. It should work as described or meant to be. 😊
J W Agrred, I have suggested as well as others for moerman to make inserts like unger to hold rubber thats a smaller sized bulb. If you use Ettore rubber in the liquidator you dont really need the inserts as its a tight fit, but with pulex and moerman rubber you need something to hold the rubber tighter. Everyone assumes rubber is the same sizes but thats not the case so not all rubbers will have the same results in the channel. But that being said there should be official inserts that come with the tool so if use do use a rubber with a smaller size you can just use the clips like many squeegees use.
J W So what squeegee/channel are you able to not using end clips?
motto775 Any handle that has teeth on it similar to Unger ergo tech handles. Ettore makes a kit you can add to your handles, but some ettore handles may come with the teeth. In other terms it’s a floating rubber, meant for light handed users. Then you have friction channels, that is held in by a pinched channel. The excelerator handle with a liquidator channel uses both teeth and friction. Wagtail uses friction channels that pinch in the center. Most circumstances: floating rubber = light handed users. Clipped channels = heavy handed users, with the exception of plastic ended channels. Hope this makes sense. 😊
Took me 10 minutes to re stitch the belt loop on mine. I'd buy a new one Evey year if I had to. I did hear that customer service sucks. Still think it's the best one out there for keeping my leg dry, holding combo tools and not rattling like crap.
For over $100 you shouldn't need to stitch anything and for that price no way I'm buying one every year. Mine didn't last 4 months. Junk.
Thanks for watching
Perry was very prompt to refund me so i can't fault him on that front, when it comes to the quality of the product, it's lacking severely
@@MrJdp1968my next brush will be the window weapon and maybe the tactical pole
Yes I would get one every year if I had to.
@@TradMan $100 one hour job or less .
true!!
I also have the problem in a different place
Yeah it's happening to a lot of folks unfortunately
Trad - Man its 5 months now
@@thewindowcleaner4646 Yeah mine broke at 4 months
this is what i hear abt all there products..
It's happening to everyone at the same damn time man!
It would seem so my friend
The reach it BOAb is simply too bulky..... The only viable. usage is. possibly. for ladder work.. Problem is. the weight of the water and all of the tools will make. you cuss. because your belt. will feel heavy. especially in hot weather.. and you will have to tighten the belt. even more. which will pee you off....Unger Ninja or any left and right dual hand. BOAB will be a better choice ! imo
I still use mine! lol.
I’ve been working with a wide range of reach it’s products, representing tens of thousands of hours now from about 15 people, and we’ve got such a “love, hate” relationship with their products.
I’ve had WF brushes crumble and break apart, BOAB’s tear, leak, screws and rivets come undone. The consensus isn’t great. I respect and appreciate the aim to give that top of the line product, but despite charging the price for it, I, we have felt really disappointed from Reach It.
A new problem that I personally am running into, is that some of the materials inside my BOAB are beginning to fray and are causing my squeegee rubbers to wear out very quickly in the middle of the channel. Less than 1 year on current reach it BOAB.
Yeah that is reach it to a T, overpriced and poor quality
I mean for 100 bucks he could make the thing out of carbon fiber!
But then he'd have to cut into his profit$ to satisfy customers. That would only be a strategy for any company that was planning to stay in business for years and build up a solid reputation
Haha very true indeed
Premium price but a cheap & nasty product! Thanks for exposing it mate 👍
You know me, I give folks the truth of what has happened with my equipment, even if it gets a good review to start doesn't mean it will stay that way. The GS let me down twice and there are many people having issues with it. Shame really
That’s the American way ironically he’s not even American nor are they made in America but mediocre product at a higher price all the savings directed into advertising convincing you it’s the best
I would never ever buy that big ole thing.
rubbish indeed