I want to do this with a balance leads install but I'm not sure how I would do it so that is hooked up to an additional channel on the transmitter like my erevo 2.0 fans are. I can shut them on and off from the transmitter with an apex rc switch i got for it. Hmmm. Must think
You’re starting to be a bad influence on me! 😂 I’m thinking about getting a 6s Kraton. If I plan on doing light bashing will the RTR suffice or should I spend the extra $ and get the EXB (after buying the motor/ESC separately) . I seen the video with both and the EXB seemed to have a little more “pop” in it which I liked but I wonder if I should wait until Arrma addresses the rear differential issue. Another option and maybe more affordable is get the EXB LSD front and center differential. Cool idea on the fan.
Earl Moorhead for the price you can’t beat it. The 6s Kraton (RTR or EXB) would be just the off road version of my Limitless. I only use my twin 3s batteries for that car but I’ve been thinking of getting another 6s vehicle so those batteries get used a little more
I don't understand using just the 3s balance wire and ground. Wouldn't that just pull power from that one cell and not the other two or am I misunderstand how the batteries are wired?
Yes, I used to think that the male end was the entire plug that went inside the entire socket. Someone told me it was the pins and I thought that was ridiculous. A male with 25 dongs? What the hell? (It was a DB25 serial port plug). So, yeah, men have more than one of those, sometimes up to 25 :)
@@earlmoorhead5555 Hi. Respectful correction: CC Sidewinder 8th has no on/off switch. Only direct battery connection to esc. (Castle's C's web page ). Thanks.
Right now I’m in the middle of trying to figure out how to wire mine up....but hooking it up to 2s on a 4s pack, wouldn’t that drain 2 cells faster than the other 2? Or am i overthinking this lmao
Yes with my 18 tooth pinion it did I’d rather not lower the gear down and the fan I haven’t tested if the temp go back to normal my temps where at 229F before the fan on a 95F day in California bashing in the dirt 🔥🔥💯💯💯
@@earlmoorhead5555 thats the problem I'm having to. We hit 108 here the other day and my motor was going into thermal protection. I have a 19t pinion on mine also have a 16t I was going to try.
Thanks Earl i didn't know the wiring on the balance leads and cool fan install
GAME CHANGER RC FANS on every car, every day...the way it should be if pushing an RC at all to its limits. They look great too. Great video Earl.
Thanks 🙏
Learned something new today thanks Earl! Did not know balance lead are wired in series and I never thought about using them for power 👍👍 dude!!
It’s pretty cool that how the charger balances each cell and know what cell goes bad 🔥🔥💯💯💯
This is what I was looking for! Excellent. I think I'm gonna make my own 40mm fan kit now..🤔
Cool fan setup,should help with the temps.
Yes I hope so to 👍👍💯💯🔥🔥
Game Changer RC fanning the FLAMES in CALI
Lmao 🤣
Nice fan setup. Gonna need it with this 100 degree heatwave. Stay cool brother
Yes and the fires 🔥 it’s crazy here right now looks like a war zone outside 👍👍💯💯💯💯
Earl Moorhead right
Those fans sound so powerful if you put four of them together you have a drone.
Yes for sure I would 🤣
Great addition to keeping it cool....
Thanks 🙏
@@earlmoorhead5555 Is there a certain model to fit the 1717 motor ?
@@earlmoorhead5555 Are the fan measurements 40mm x 40mm x 28mm?
No but I did put a link in the description but game changer rc knows what you need just ask him he’s on RUclips as well 👍👍💯🔥🔥🔥
Not sure I do have the links in the description below 🤪👍💯💯💯😀
EarlMoorhead do a video on the mini t 2.0 please i want to know what 3s battery will fit it good please and thank you awesome video
U the man Earl, great vid. Hopefully the fires are dying down so U can get out
Yes they are be nice to get out again 👍🔥🔥🔥💯💯💯
Great fan mod Earl I'm getting the 6s 1/7 Krayton 😎👍
Nice the ExB or the v4 Kraton 6s 👍👍
@@earlmoorhead5555 the rtr that comes blue 👍
I’d be interested to see where your temperatures sit while bashing...that fan sounds real strong!
Have stick piece dry ice 🧊 on top 😆
The motor temps where 224 so way to hot at least the data logger showed those temps 👍👍💯💯🔥🔥🔥
Earl Moorhead Thanks, that is hot....that fan fan should help a ton it sounds like a beast!! 👍🏼
Ohh i need balance lead , but with my fans I've been using jst plugs for fans but your way seems better
Just easier to run all types of batteries 🔥🔥💯💯💯
@@earlmoorhead5555 definitely as I only made couple batteries for accessories, why i watch you earl 👍🤙💯
@@earlmoorhead5555 i broke balance lead goes from charger to balance board , i think that venom lead woukd work , i have look closer
I want to do this with a balance leads install but I'm not sure how I would do it so that is hooked up to an additional channel on the transmitter like my erevo 2.0 fans are. I can shut them on and off from the transmitter with an apex rc switch i got for it. Hmmm. Must think
CALI FIAH STATAH🔥🔥🔥
🔥🔥🔥🤷🏼♂️🤷🏼♂️
nice job earl
Thanks 🙏
That is great Earl May send those with each fan setup. You got mail by the way💡💪💯
Yes video already done on today’s shipment 💯💯💯
Love the videos
Thanks 🙏
This wouldn't cause the cells in the lipo to drain unequally?
Should balance out with them in series maybe they be a little lower but the other cells should keep them balanced a little as well 👍👍💯💯🔥🔥🔥
You’re starting to be a bad influence on me! 😂 I’m thinking about getting a 6s Kraton. If I plan on doing light bashing will the RTR suffice or should I spend the extra $ and get the EXB (after buying the motor/ESC separately) . I seen the video with both and the EXB seemed to have a little more “pop” in it which I liked but I wonder if I should wait until Arrma addresses the rear differential issue. Another option and maybe more affordable is get the EXB LSD front and center differential. Cool idea on the fan.
The v4 a beast 💯💯👍👍🔥🔥💯
Earl Moorhead for the price you can’t beat it. The 6s Kraton (RTR or EXB) would be just the off road version of my Limitless. I only use my twin 3s batteries for that car but I’ve been thinking of getting another 6s vehicle so those batteries get used a little more
I don't understand using just the 3s balance wire and ground. Wouldn't that just pull power from that one cell and not the other two or am I misunderstand how the batteries are wired?
The batteries are wired in series not parallel that where your not understanding it will pull from all three 🔥🔥🔥
@@earlmoorhead5555 beautiful thing!
Yes, I used to think that the male end was the entire plug that went inside the entire socket. Someone told me it was the pins and I thought that was ridiculous. A male with 25 dongs? What the hell? (It was a DB25 serial port plug). So, yeah, men have more than one of those, sometimes up to 25 :)
🤪🤪🤣🤣🤣
Oh my benzomatic little smaller. I have checkbthat one out
Nice they work great 🔥🔥
Hi. Is there a on/off switch for the Castle Sidewinder 1515 esc/motor combo you know of?
The sidewinder has an on off switch castle creation sells them 🤔🤔
@@earlmoorhead5555
Thanks. I"ll look into that right away.
@@earlmoorhead5555
Hi. Respectful correction:
CC Sidewinder 8th has no on/off switch. Only direct battery connection to esc. (Castle's C's web page ).
Thanks.
That's one loud fan 😂 looks good 👍 😎
Yes it works great 💯💯
Is your back shock tower bin
Not that I know of 👍👍💯💯💯
So if its Hooked up like that to a 3s lipo the fan wouldn't run at full speed? I'd like to put one of those fans on my e revo vxl!
The fans run on 3s only so I set it up no matter what to run 3s on any battery 💯💯🔥🔥🔥
Right now I’m in the middle of trying to figure out how to wire mine up....but hooking it up to 2s on a 4s pack, wouldn’t that drain 2 cells faster than the other 2? Or am i overthinking this lmao
There hooked in series so it will drain pretty even as the other cells should try and balance the pack 👍👍🔥🔥💯💯💯
Earl Moorhead ohhhhh ok thank you
What heatsink do you use for the motor
Arrma Kraton 8s heat sink I talked about it and showed how to drill it for the game changer fan 👍
Earl did that motor get pretty hot in there before the fan?
Yes with my 18 tooth pinion it did I’d rather not lower the gear down and the fan I haven’t tested if the temp go back to normal my temps where at 229F before the fan on a 95F day in California bashing in the dirt 🔥🔥💯💯💯
@@earlmoorhead5555 thats the problem I'm having to. We hit 108 here the other day and my motor was going into thermal protection. I have a 19t pinion on mine also have a 16t I was going to try.
what heatsink model is that?
First! Thought maybe you took the day off
No the fires been making it hard to film lately 👍👍🔥🔥🔥