I did think why you using a wafer thin saw over a nice big rip saw, don’t get me wrong with my skill level I’d probably go offline even with a rip saw. But it seems more appropriate choice. I’d still love him to do this with budget tools and a stanly no 4. Like Aldi/Lidl/Screwfix budget tools. I know he’s more than capable. But I watch this and think yep that large Stanley plane most people are not going to own unless dedicated hand tool woodworkers.
Mr Parry our very good woodwork teacher said he decided to become a teacher when he found his young son using his brand new long plane to plane a concrete path. Really good teacher.
Love how you call yourself out on using the power drill out of habit, makes it all the more relatable to be honest. In the end it just means, you'll have to do this again at some point for the "Hand tool only build, this time for real, I promise" 9-part series building some other beauty
So not only are you an exceptional luthier and all-round great youtube entertainer, you also recite Terry Pratchett!! Is there any limit to your knowledge?!
Evidently whether or not a cordless drill is a hand tool is beyond Ben's knowledge XD honestly can't fault him though, it was entirely possible to due the locating pins with hand tools he had literally behind him on the wall, just a slip of the mind
I cannot express just how much I enjoyed the mini-planes bit. I was following this build as I do with most if I am able, but the vintage tool bit made it for me. I was gifted some from my grandfathers and use them all the time. Thanks for this video, it made my day.
My pleasure, thank you for this. I'll make sure to digress in this sort of direction a bit more often then 😀 seriously though, there will be a video of me restoring these and maybe a video looking at my collection of tiny tools one day soon on top of that.
Not only is it great to watch your creations, it also gets my youtoob feeds back on track in terms of reality. One month to go, and I'll have my workshop set up for guitar building.
I have been inspired by you since the first video I watched a few years ago. I remain inspired by your creative vision and ability as an artist. Building guitars has changed my life, brought me endless joy and I was lead to this by you my friend. Thank you from the bottom of my heart Ben. Todd @Sweet T Guitars
I can't tell you how much I appreciate the "101" at 22:00 . I'm a power tool woodworker, but couldn't wrap my hand around hand planes, as I've never owned one. Hearing you mention that you start digging in with the front, then shift your downward pressure to the back, I could finally wrap my head around how it would work, effectively turning the "back" of the band plane into a jointer's outfeed table (for a power tool comparison). I wondered, though, how this would work in practice, and it never occurred to me that you'd transfer your pressure from one part of the plane to another.
At 18 i learned from ex pattern makers in there 50s then now i am 55 and watching you brings back a lot of memory's. I spent hours planning wood as flat as i could with a long wood box plane then having it put on the granite table where it would be checked with a micrometre dial for run off several of them went striate out of the open window and start again this was my life for 6 months and making the wood two part mould for the sand part that would make the shape on the casting that the Crain would fit into only to get machined off later all with hand tools .I am loving the build of this guitar i have made 7 electric guitars now and loving it .
Ben I have been following this build almost religiously. I enjoy your humor and find it reassuring that even skilled artisans like yourself find hand sawing a challenge at times. Can't wait for episode four to whatever I for one won't be Missing a single one.
Absolutely brilliant, so intriguing and interesting and you have such a great personable appeal, you are likeable and have a warmth which really makes me want you to succeed with this, and I now you will, I so want to follow this job through to the end. Its great and thank you. These skills are, hopefully going to carry on and not die out.
I want to say that the person you have editing your videos is solid gold. Massive props to them -- they take your material and produce something vastly entertaining and beautifully polished.
When you put the hat on, you had child-like eyes as if you were in a toy store and had been given free choice of any toy there! Then you show the microplanes, and there is the toys of which we speak! On another note, this guitar build has me completely yearning to build a traveler’s guitar! I will be ready for the next installment of this series! (Oh and I saw you with that electrical device in your hand…naughty boy!) 😎
I love how you go out of your way to still try and do things as you feel like it, not necessarily following "the correct" order or even using tools that wouldn't be your first go to. It creates this never ending opportunity to learn from obstacles and discover potential new ways of doing "the same thing". Not to mention, it helps us mortals feel like we can relate when you make... mistakes? Much love! Al.
This is amazing. Sort of 19th century luthier with all of the knowledge learned over the time since. Love this series. Very excited to see where you go with it.
This video is a great example of being able to 'muddle through' a guitar build, solely by virtue of being really *really* good at guitar building. There was always a guitar in that wood, it just took someone like you to bring it out. Awesome stuff.
I just bit the bullet and imported a Triton Oscillating Belt / Spindle sander into Dubai....best thing I've bought in a very long time. I dont know how you could build a guitar without it!
Love it! Hand tools appeal to me in large part because you have to figure out a way to do things old school, without the aid of the machines we use most times. And we are reminded that woodworkers did all of the things we do with wood today a long time before man was plugging things into wall sockets. When I started trying to build, I went on luthier forums asking how to do the work without all the machines. What I frequently got in response was, "If you can't afford the machines, find another hobby." Uhhh, I don't think so, Batman. I'm looking forward to the mini planes restoration, and their use.
This looks so good ben an I'm loving it...those little hand planes are for making finished carpentry the old way shiplaping,an scallopping trim work in cabinetry an ,furniture...these look as they were made for detailing jewelery box making ...I worked as furniture maker in my 20's an these planes were in use ( the styles an models ...not the size....
And THAT'S why all my power tools are on the bottom shelf and my hand tools are on the wall within reach. No worries! Still my favorite guitar builder on RUclips!
There was something intensely satisfying and mathematical about that scarf joint, but for my OCD personality, the trussrod slot and the plane blade sharpening were things of beauty. This is a joy to watch...
I think this is great! Reminds me of hanging out with my Dad in his shop trying to learn the things that took him so long to master. Thank you, I'll definitely be following this project.
Ben i really enjoy your vids they are so relatable, we both spend more time playing with the tools and wood, than actually making stuff. And the foresight gets lost through sheer excitement to get chopping... I cant play the guitar,or really know anything about them but our trades aren't a million miles from each other.
Hello Ben, noticed title of video and wanted to dropped by to express my many thanks to you sir. i have learned more that I thought possible simp;e watch videos. People at this perticular point in histroy i don’t think fully grasp the advantage RUclips has provided, anyone regardless of experience can build, repair or fine tune projects that before required the exxperience and technics only found at the jounrneyman level, You are one of these amazing people sharing your hard gained knowledge of lessons learned. Scarf joints are on my "Be 100% proficient Critical Task List" these are items I feel I have to be able to execute and complete professionaly seamlessly to the eye. (being a perfectionist doesnt help). Again many thanks to you and the kids at Crimson making guitar building an adventure ( and yes i can say kids I'm 63 ) startinmg this as a new professison and my age demand i shorten the learning curve and find best practices, techniques possible learing from the best inly makes sense. If I was in the UK the form posted on your website would be complete and on your bench already. I spent the last 30 plus years traing soldiers to be tactically and technically proficient, as with you i love to teach. I'm building molds next that Pablo Requena shared on his channel another good man keeping Guitar building alive for future generations, another guitar builder ive watched is Micheal Greenfield…beautiful guitars… layable works of art with attention to detail that is truly amazing. Well be safe and rock on bro we need you out here in the real world. Derek A Colton
Thank you very much for all the tips and all of the great videos you've posted.I'm soon starting on building my own guitar so this channel is gonna be my best friend for a while.
Nice to see I’m not the only one who makes things a little harder than perhaps they should be, the number of times I’ve had to make additional cuts does not bear thinking about. Hey but is all great practice. Great video Ben! Cheers Dave
Procrastination has at least 1 good argument. Normally we have to muster our own motivation to do something which takes a kind of energy/will power , but when something is left to last minute motivation doesn't really matter anymore - circumstances are forcing us to do it . It is providing it's own will power in effect
Really enjoying this. Great tip with shifting the weight on the, erm, big long thingy plane. Not that I own one, but if I did, I’d now know what to do with it.
It's not very often that I get excited about an upload but........ This week has dragged so bad waiting for this video. I even re-watched nebula 2.0 while waiting just to get a fix. You never fail to impress me. Thank you.
Really excited for this build. I’ve only built electrics so far, but I’ve been wanting to try a simplified acoustic. This series is going to be my template for that. Thank you Ben!
Those mini planes are great. I still have some of the planes my dad made as a cabinet maker, and I was a fitter/turner and then toolmaker many years ago and still have all the small custom tooling I made. I love stuff like that. Looking forward to the video. Its great to use tools like that - they were usually make for a single purpose and are tools, and not to gather dust as ornaments so to see them in use again would be fantastic.
It brought a tear to my eye to see those micro planes. My dad had a similar collection inherited from his father. Always wondered what they were for when I was a nipper. Really enjoying this build. Thanks for the inspiration👍
My friend you are the Norm Abram of guitar maker (Luthier) . I always use to use a candle on my saw blades so I had an easier cut but that was a trick that I had learnt from from a master carpenter. Regardless. Love your work. Nice to see someone use hand tools . Even though power tools do make our lives easier. Can't wait till next episode. Keep up the great work 👍
It's telling that absolutely no one following your videos will have the slightest problem with the tiny slip up @ the drill. We all know it was just reflex action, the same job could have been done by hand any day. Very pleasing to see the carving and cutting being done.
Less attention is given to panel and handsaws when essentials for handtool work comes about. For good reason, really-bandsaws. To show off your handy work, dovetail saws get the limelight whilst effort in roughing out dimensional timber feels like a thankless task. They're the fore/scrub planes of the saw world and not used much, so I'm glad you did! It's common for Japanese pull-stroke saws to wander on the backside if you're not routinely ripping stock or had a mess about beforehand. Focused on your marked lines on the front, Japanese saw teeth engage on the back where you can't see, so you can't alter your technique in real time. Give a Western panel/hand saw a go next time and feel which is preferable for you! Looking forward to the next episode, I've been binge watching with my Dad during the storms here.
Holy Hell! It's such a relief to see that you're actually a human being Ben Crowe. Not as I was suspecting, some kind of luthier cyborg/wizard o'doom. But seriously, it's just priceless to see you addressing every little mistake on the spot. Very important learning experience for me and my chaotic nature. I've just realized I keep forgetting about my own fuck ups exactly 2,5 seconds after the recovery. Thank you Ben! I've just learned something about the correct approach and healthy attitude towards guitar building. Live long and prosper!
Very cool ben! I can’t wait to see those antique thumb planes at work. It gives me the idea to build my own little thumb planes. Trial and error and proper blade angles! 😁😁 learning is knowledge and knowledge is power. Hence, I’m creating my own “power tools”😁😁
Tooth picks: After studying many of your videos prior to my first build, I confidently drilled through the fretboard into the neck to secure it with tooth-picks during the glue-up. Only later did I discover I had set out the fret positions in the wrong place ! Forethough and planning lacking indeed!
I may have said this on a different @CrimsonCustomGuitars video, but it absolutely bears repeating. @PaulSellersWoodwork and you Mr Crowe are 1 and 1(a) for my all time favorite hand tool masters.
Talking of rickety work benches the desk I brought as assemble yourself was very wobly so I pulled it appart and glued it instead of relying on the joint blocks. It is now rock steady and has served me well for over eght years.
Thanks so much for sharing this build. It is amazing to me how you can take a chunk of wood and work it into something so complex and functional without modern tools. Really, I think the cordless drill can be overlooked considering it's functionally equivalent, but I get the impression that it will haunt you forever more that you unintentionally destroyed the purity of the build. It would me, even if it doesn't matter really. Looking forward to seeing more.
Enjoyed this one using my brand new IsoTune FREE set. Thanks for the recommendation. Love them. Used their black Friday deal but my parents bought a set using your coupon code to get my nephew a set for Christmas (he's an auto mechanic working in a performance shop).
I was so chuffed with myself, as soon as I saw that crack I thought “ just split it along the crack” & then you did it 🤗, just one thing, careful with that axe eugene, once again, thanks for excellent vid Ben 👍
The crack presenting itself is neither a bug nor a feature. It is, as you well know Ben, a “design opportunity”. It’s one of the reasons I prefer woodworking to metal working. It can force you to think “outside the box” and consider what the wood wants to do.
loving this series so much, I'm holding out for each episode to arrive. I'm pretty sure this will form the basis for my second build (first build is 80% done). Researching local (nz) timber already ...
A 4x4 fence post travel guitar, a trip to the ashmoleam museum to research instruments, baroque perfling, vintage tools, liked, subscribed and clicked the bell.
@@CrimsonCustomGuitars I needed that laugh at the time dude, just getting over the worst of the unspeakable flu and trying to make sure a couple of toy shop electric guitars are somewhat playable before Christmas, those things are just thrown together with no thought at all. so your little mistake cheered me right up, and absolutely great editing made it even funnier.
@@CrimsonCustomGuitars long time subscribers should note that you did (in this video) hold up the drill to sarcastically call yourself out... Instinct to grab the drill too hahaha
Loving this build, the little `complex` plane (at 42 mins) is called a `Moulding` plane, this is back when Joiners planed their own mouldings onto the top edge of skirtings & the edge of door facings (sometimes called architraves)
my vote is to get rid of the lettering! Sand it nice. (Flatsawn neck. Fender doing it for 70 years.) Love this build. Thank you so much for you videos! Again, love, love, love this build!!! Took several re-watches to figure out the drill thing.
I've been looking forward to seeing you building an acoustic with hand tools as it's something I've been wanting to attempt myself those tiny hand planes look interesting 😁
we used to use a small side rebateing plane when making box sash windows for the parting beads think it was a stanley . the old joiners where always making usefull things. another mate was a patten maker again loads of home made tools
The problem in this case was using a japanese saw without japanese technique. While cutting, the back end of the japanese saw should not be cutting, only the piece closest to you. Once you reach 45 degrees, you flip the piece and cut down horizontally until your cutline is horizontal. Then, you drop you hands again cutting until you reach 45 degrees. Etc.
Since you’ve fought your bench racking several times. Does that mean the next build will be Ben making the Ultimate Guitar Building Workbench!? Click bait title aside, that’d be a series I’d love to watch
I thought I was the only person on earth who couldn't saw a straight line into a piece of wood. Thank you for helping my confidence 😊
You have no idea how reassuring it is to see Ben saw that wood like it was something I did!
Can totally relate to having achieved similar results while working on even just a small block of mahogany for control cavity cover.
I did think why you using a wafer thin saw over a nice big rip saw, don’t get me wrong with my skill level I’d probably go offline even with a rip saw. But it seems more appropriate choice. I’d still love him to do this with budget tools and a stanly no 4. Like Aldi/Lidl/Screwfix budget tools. I know he’s more than capable. But I watch this and think yep that large Stanley plane most people are not going to own unless dedicated hand tool woodworkers.
@@MrSongwriter2 while he wasn't using the ideal type or size of Japanese saw for long rips, he was definitely using a rip-cut saw.
Mr Parry our very good woodwork teacher said he decided to become a teacher when he found his young son using his brand new long plane to plane a concrete path. Really good teacher.
Love how you call yourself out on using the power drill out of habit, makes it all the more relatable to be honest. In the end it just means, you'll have to do this again at some point for the "Hand tool only build, this time for real, I promise" 9-part series building some other beauty
You got it in one.. I'll need to do this all again 😀 I can't wait!
So not only are you an exceptional luthier and all-round great youtube entertainer, you also recite Terry Pratchett!! Is there any limit to your knowledge?!
Evidently whether or not a cordless drill is a hand tool is beyond Ben's knowledge XD honestly can't fault him though, it was entirely possible to due the locating pins with hand tools he had literally behind him on the wall, just a slip of the mind
Everytime you put the planer down on its side i remember the many headsmacks we got from our woodwork teacher whenever he found a plane on its sole!
Everyone deserves someone who looks at them the way Ben looks at hand planes.
As a guitar player and woodworker of sorts I’m thoroughly enjoying this series
Thank you.. you are on the journey to being a guitar builder!
I cannot express just how much I enjoyed the mini-planes bit. I was following this build as I do with most if I am able, but the vintage tool bit made it for me. I was gifted some from my grandfathers and use them all the time. Thanks for this video, it made my day.
It's like Jack Hargreaves if he made guitars :o)
Why thank you!
My pleasure, thank you for this. I'll make sure to digress in this sort of direction a bit more often then 😀 seriously though, there will be a video of me restoring these and maybe a video looking at my collection of tiny tools one day soon on top of that.
Not only is it great to watch your creations, it also gets my youtoob feeds back on track in terms of reality.
One month to go, and I'll have my workshop set up for guitar building.
I have been inspired by you since the first video I watched a few years ago. I remain inspired by your creative vision and ability as an artist. Building guitars has changed my life, brought me endless joy and I was lead to this by you my friend. Thank you from the bottom of my heart Ben.
Todd @Sweet T Guitars
I can't tell you how much I appreciate the "101" at 22:00 . I'm a power tool woodworker, but couldn't wrap my hand around hand planes, as I've never owned one. Hearing you mention that you start digging in with the front, then shift your downward pressure to the back, I could finally wrap my head around how it would work, effectively turning the "back" of the band plane into a jointer's outfeed table (for a power tool comparison). I wondered, though, how this would work in practice, and it never occurred to me that you'd transfer your pressure from one part of the plane to another.
glad even an expert luthier has cuts that decide to go their own direction!
At 18 i learned from ex pattern makers in there 50s then now i am 55 and watching you brings back a lot of memory's. I spent hours planning wood as flat as i could with a long wood box plane then having it put on the granite table where it would be checked with a micrometre dial for run off several of them went striate out of the open window and start again this was my life for 6 months and making the wood two part mould for the sand part that would make the shape on the casting that the Crain would fit into only to get machined off later all with hand tools .I am loving the build of this guitar i have made 7 electric guitars now and loving it .
These videos are fantastic and take me away form the stresses of everyday life
There was nothing wrong with the wood, it merely had a different guitar hidden inside it.
Oh lol. I love this, thank you!
Ben I have been following this build almost religiously. I enjoy your humor and find it reassuring that even skilled artisans like yourself find hand sawing a challenge at times. Can't wait for episode four to whatever I for one won't be Missing a single one.
Thank you Rod.. and yeah, turns out I REALLY need to uo my saw game 😀
I'm loving that the first bit of actual wood work came a few minutes into episode *2* of this series 😁😁
technically speaking this is actually the third episode.
Shhhhh
Preparation is key 😉
@@CrimsonCustomGuitars It's all about 6P (in my mind) - Prior Planning Prevents Pi$$ Poor Performance lol
Absolutely brilliant, so intriguing and interesting and you have such a great personable appeal, you are likeable and have a warmth which really makes me want you to succeed with this, and I now you will, I so want to follow this job through to the end. Its great and thank you. These skills are, hopefully going to carry on and not die out.
I want to say that the person you have editing your videos is solid gold. Massive props to them -- they take your material and produce something vastly entertaining and beautifully polished.
When you put the hat on, you had child-like eyes as if you were in a toy store and had been given free choice of any toy there! Then you show the microplanes, and there is the toys of which we speak! On another note, this guitar build has me completely yearning to build a traveler’s guitar! I will be ready for the next installment of this series! (Oh and I saw you with that electrical device in your hand…naughty boy!) 😎
I love how you go out of your way to still try and do things as you feel like it, not necessarily following "the correct" order or even using tools that wouldn't be your first go to. It creates this never ending opportunity to learn from obstacles and discover potential new ways of doing "the same thing". Not to mention, it helps us mortals feel like we can relate when you make... mistakes?
Much love!
Al.
This is amazing. Sort of 19th century luthier with all of the knowledge learned over the time since. Love this series. Very excited to see where you go with it.
This video is a great example of being able to 'muddle through' a guitar build, solely by virtue of being really *really* good at guitar building. There was always a guitar in that wood, it just took someone like you to bring it out. Awesome stuff.
I just bit the bullet and imported a Triton Oscillating Belt / Spindle sander into Dubai....best thing I've bought in a very long time. I dont know how you could build a guitar without it!
Hey David, glad you like it.. I could not agree more, one of my favourite tools of ALL time!
I LOVE YOU FOR THE DISCWORLD REFERENCE!!! I say that ALL the time, and I'm in the US.
Love it! Hand tools appeal to me in large part because you have to figure out a way to do things old school, without the aid of the machines we use most times.
And we are reminded that woodworkers did all of the things we do with wood today a long time before man was plugging things into wall sockets.
When I started trying to build, I went on luthier forums asking how to do the work without all the machines. What I frequently got in response was, "If you can't afford the machines, find another hobby." Uhhh, I don't think so, Batman.
I'm looking forward to the mini planes restoration, and their use.
I'm saying that again, the lettering as a classic Les Paul style pickguard would be sweet, and elegant way of showing the origin of that wood piece.
This looks so good ben an I'm loving it...those little hand planes are for making finished carpentry the old way shiplaping,an scallopping trim work in cabinetry an ,furniture...these look as they were made for detailing jewelery box making ...I worked as furniture maker in my 20's an these planes were in use ( the styles an models ...not the size....
And THAT'S why all my power tools are on the bottom shelf and my hand tools are on the wall within reach. No worries! Still my favorite guitar builder on RUclips!
There was something intensely satisfying and mathematical about that scarf joint, but for my OCD personality, the trussrod slot and the plane blade sharpening were things of beauty. This is a joy to watch...
thank you for explaining how to transfer pressure with the planes. that makes things make a lot more sense lol
I think this is great! Reminds me of hanging out with my Dad in his shop trying to learn the things that took him so long to master. Thank you, I'll definitely be following this project.
Thank you. It will be a tad intermittent with Christmas and the other two projects going on but I am having a blast and progress will be swift 😀
Ben i really enjoy your vids they are so relatable, we both spend more time playing with the tools and wood, than actually making stuff. And the foresight gets lost through sheer excitement to get chopping...
I cant play the guitar,or really know anything about them but our trades aren't a million miles from each other.
Hello Ben, noticed title of video and wanted to dropped by to express my many thanks to you sir. i have learned more that I thought possible simp;e watch videos. People at this perticular point in histroy i don’t think fully grasp the advantage RUclips has provided, anyone regardless of experience can build, repair or fine tune projects that before required the exxperience and technics only found at the jounrneyman level, You are one of these amazing people sharing your hard gained knowledge of lessons learned.
Scarf joints are on my "Be 100% proficient Critical Task List" these are items I feel I have to be able to execute and complete professionaly seamlessly to the eye. (being a perfectionist doesnt help). Again many thanks to you and the kids at Crimson making guitar building an adventure ( and yes i can say kids I'm 63 ) startinmg this as a new professison and my age demand i shorten the learning curve and find best practices, techniques possible learing from the best inly makes sense. If I was in the UK the form posted on your website would be complete and on your bench already. I spent the last 30 plus years traing soldiers to be tactically and technically proficient, as with you i love to teach.
I'm building molds next that Pablo Requena shared on his channel another good man keeping Guitar building alive for future generations, another guitar builder ive watched is Micheal Greenfield…beautiful guitars… layable works of art with attention to detail that is truly amazing.
Well be safe and rock on bro we need you out here in the real world.
Derek A Colton
Amazing the tone of the mahogany while still in "fence post" shape. You've got a piece of wood there.
Those little planes need a box made for them, each with its own place and possibly lined with velvet. 🙂👍
Thank you very much for all the tips and all of the great videos you've posted.I'm soon starting on building my own guitar so this channel is gonna be my best friend for a while.
Hey, best of luck on your guitar build 👍
@@CrimsonCustomGuitars Thank you very much.I've also saved your website for any of the stuff I'll be needin.
That box of planes needs its own vid. I'm here for it. (will maybe forgive the drill in exchange for the planes vid)
Glad to see that you have similar reticence to cutting a piece of fine lumber that us mere mortals do.
Nice to see I’m not the only one who makes things a little harder than perhaps they should be, the number of times I’ve had to make additional cuts does not bear thinking about. Hey but is all great practice. Great video Ben! Cheers Dave
Procrastination has at least 1 good argument. Normally we have to muster our own motivation to do something which takes a kind of energy/will power , but when something is left to last minute motivation doesn't really matter anymore - circumstances are forcing us to do it . It is providing it's own will power in effect
Obviously that box should have its own video, and you should finish making that unfinished plane. Yes, that little box is soooo cool!
Really enjoying this. Great tip with shifting the weight on the, erm, big long thingy plane. Not that I own one, but if I did, I’d now know what to do with it.
Nice job with the splitting. You know how lucky you got, don't you? I can't wait to see how the rest goes.
Surprised he doesn’t have a hand powered bandsaw
Wow those mini planes are sweet..looking forward to seeing them in a future video. All Beautified.....
You and me both!
It's not very often that I get excited about an upload but........ This week has dragged so bad waiting for this video. I even re-watched nebula 2.0 while waiting just to get a fix. You never fail to impress me. Thank you.
Those miniature planes are adorable!
Really excited for this build. I’ve only built electrics so far, but I’ve been wanting to try a simplified acoustic. This series is going to be my template for that. Thank you Ben!
I love those mini planes! Tiny stuff for specialist jobs always amazes me.
Me too.. I love Tiny tools
Ben this whole build including your design drawing was very interesting. Bravo.
Those mini planes are great. I still have some of the planes my dad made as a cabinet maker, and I was a fitter/turner and then toolmaker many years ago and still have all the small custom tooling I made. I love stuff like that. Looking forward to the video. Its great to use tools like that - they were usually make for a single purpose and are tools, and not to gather dust as ornaments so to see them in use again would be fantastic.
Right on, I love old tools and feel exactly the same as you.. I can't wait to use some of them again
It brought a tear to my eye to see those micro planes. My dad had a similar collection inherited from his father. Always wondered what they were for when I was a nipper. Really enjoying this build. Thanks for the inspiration👍
My friend you are the Norm Abram of guitar maker (Luthier) . I always use to use a candle on my saw blades so I had an easier cut but that was a trick that I had learnt from from a master carpenter. Regardless. Love your work. Nice to see someone use hand tools . Even though power tools do make our lives easier. Can't wait till next episode. Keep up the great work 👍
I use wax on plane blades sometimes, not tried on a saw.. then again I rarely use saws for big rip cuts like this.. I need practice lol
The mind can play strange games , when you planed that first side of the neck block I swear I could smell mahogany !!!!!
Isn't it great? I get that sort of experience all the time while watching Makers on RUclips.
It's telling that absolutely no one following your videos will have the slightest problem with the tiny slip up @ the drill. We all know it was just reflex action, the same job could have been done by hand any day. Very pleasing to see the carving and cutting being done.
Well handled, just the right amount of humour. Enjoying this build immensely! Hope we can get the next episode soon!
Your videos are always so well done and entertaining. So much respect for you Ben
Less attention is given to panel and handsaws when essentials for handtool work comes about. For good reason, really-bandsaws. To show off your handy work, dovetail saws get the limelight whilst effort in roughing out dimensional timber feels like a thankless task. They're the fore/scrub planes of the saw world and not used much, so I'm glad you did!
It's common for Japanese pull-stroke saws to wander on the backside if you're not routinely ripping stock or had a mess about beforehand. Focused on your marked lines on the front, Japanese saw teeth engage on the back where you can't see, so you can't alter your technique in real time. Give a Western panel/hand saw a go next time and feel which is preferable for you!
Looking forward to the next episode, I've been binge watching with my Dad during the storms here.
Holy Hell! It's such a relief to see that you're actually a human being Ben Crowe. Not as I was suspecting, some kind of luthier cyborg/wizard o'doom. But seriously, it's just priceless to see you addressing every little mistake on the spot. Very important learning experience for me and my chaotic nature. I've just realized I keep forgetting about my own fuck ups exactly 2,5 seconds after the recovery. Thank you Ben! I've just learned something about the correct approach and healthy attitude towards guitar building. Live long and prosper!
Thanks for showing off the micro planes. That was nice to watch.
Very cool ben! I can’t wait to see those antique thumb planes at work. It gives me the idea to build my own little thumb planes. Trial and error and proper blade angles! 😁😁 learning is knowledge and knowledge is power. Hence, I’m creating my own “power tools”😁😁
oooh, I LIKE what you did there :)
@@CrimsonCustomGuitars hahahaha it’s kinda my own form of linguistic skullduggery. I can talk myself into anything. Just ask me. 😂😂
That box of micro-planes is a box full of treasure. I would call it my precious, if I had it.
Was not expecting to see an axe in a guitar build! Love that
neither was I! you never really know which was a build will go nor what tools could end up being required :)
That bench! The process! The head tattoo! Excellent brother
Tooth picks: After studying many of your videos prior to my first build, I confidently drilled through the fretboard into the neck to secure it with tooth-picks during the glue-up. Only later did I discover I had set out the fret positions in the wrong place ! Forethough and planning lacking indeed!
I may have said this on a different @CrimsonCustomGuitars video, but it absolutely bears repeating. @PaulSellersWoodwork and you Mr Crowe are 1 and 1(a) for my all time favorite hand tool masters.
That mahogany sounds like it has a lovely resonance about it even as just a solid chunk! Going to sound great when you finish In 10 episodes Ben 😉😜
Talking of rickety work benches the desk I brought as assemble yourself was very wobly so I pulled it appart and glued it instead of relying on the joint blocks. It is now rock steady and has served me well for over eght years.
Should definitely save up all the plane shavings and make an epoxy and shavings guitar aha
Love your humor! Always look forward to your Vlogs thank you!
You should number the episodes like movie car gears - 1st, 2nd, 3td, 4th, and bunch of 5ths :)
Thanks so much for sharing this build. It is amazing to me how you can take a chunk of wood and work it into something so complex and functional without modern tools. Really, I think the cordless drill can be overlooked considering it's functionally equivalent, but I get the impression that it will haunt you forever more that you unintentionally destroyed the purity of the build. It would me, even if it doesn't matter really. Looking forward to seeing more.
Enjoyed this one using my brand new IsoTune FREE set. Thanks for the recommendation. Love them. Used their black Friday deal but my parents bought a set using your coupon code to get my nephew a set for Christmas (he's an auto mechanic working in a performance shop).
I was so chuffed with myself, as soon as I saw that crack I thought “ just split it along the crack” & then you did it 🤗, just one thing, careful with that axe eugene, once again, thanks for excellent vid Ben 👍
Very cool.Back to the basics, love it. Thanks
I was so happy to see a new episode of this, I hit the like button before it even started playing!
The crack presenting itself is neither a bug nor a feature. It is, as you well know Ben, a “design opportunity”. It’s one of the reasons I prefer woodworking to metal working. It can force you to think “outside the box” and consider what the wood wants to do.
Got it in one. Wood keeps you on your toes 😏
Amazing! Watching a master craftsman ply his craft is very fulfilling. Well done, sir.
Glad you enjoyed it, thank you!
Thank you for creating this video
Anyone ‘reciting’ the great Terry Pratchett’s Disc World in a non-literary way deserves a +MANY! Because of, you know, brilliance ‘n all!
loving this series so much, I'm holding out for each episode to arrive. I'm pretty sure this will form the basis for my second build (first build is 80% done). Researching local (nz) timber already ...
A 4x4 fence post travel guitar, a trip to the ashmoleam museum to research instruments, baroque perfling, vintage tools, liked, subscribed and clicked the bell.
Scarf joints are very satisfying to make :)
It's amazing how useful toothpicks and a "cordless drill" can be when guitar building without power tools 🤣
You're teasing me, I deserve it 😤
@@CrimsonCustomGuitars I needed that laugh at the time dude, just getting over the worst of the unspeakable flu and trying to make sure a couple of toy shop electric guitars are somewhat playable before Christmas, those things are just thrown together with no thought at all. so your little mistake cheered me right up, and absolutely great editing made it even funnier.
Use salt to stop the two pices of wood from moving. Then you wouldn't of needed power tools. Love you builds thanks for taking us along.
@@CrimsonCustomGuitars long time subscribers should note that you did (in this video) hold up the drill to sarcastically call yourself out...
Instinct to grab the drill too hahaha
Mr Ben you can do it!!!!!!
If Bill Bailey and Kerry King had a child......it would be an amazing feat of human evolution. While that's not possible, I guess we have this guy!
Lol. I'll take that
Maybe I missed something, but your video quality is through the roof, good job.
You are forgiven for the drill. Everyone relaspe from time to time. Love your work, I need to buy a guitar, fiddle , or violin from yall. Take care!
Makes this look so easy. If I did it probably wouldn’t be so easy
I kind of love the vintage tools the most. That said, I do feel like you need to start over because of the power drill (just kidding).
Loving this build, the little `complex` plane (at 42 mins) is called a `Moulding` plane, this is back when Joiners planed their own mouldings onto the top edge of skirtings & the edge of door facings (sometimes called architraves)
I was more wondering on the particular shape moulding it would make, ogee, Scotia etc
my vote is to get rid of the lettering! Sand it nice. (Flatsawn neck. Fender doing it for 70 years.) Love this build. Thank you so much for you videos! Again, love, love, love this build!!! Took several re-watches to figure out the drill thing.
You should look up this video called “the greatest luthiers trick of all time” I think it could help your “shaky” bench lol. I love your videos Ben
So good to see even someone of Ben’s calibre make a mistake …. Great channel
I've been looking forward to seeing you building an acoustic with hand tools as it's something I've been wanting to attempt myself those tiny hand planes look interesting 😁
It feels like the more episodes we see - the longer the build is going to be.
yep. ep 2.1 out on Saturday.. a digression into hand plane building lol
What a treasure, that box of tiny planes!
I know right? A box that literal dreams are made of!
By the way I love your table lamp re-purposed from a motor cycle--Kool !!
thank you, that was a fun build. ruclips.net/video/xxAs6xOqKD4/видео.html
we used to use a small side rebateing plane when making box sash windows for the parting beads think it was a stanley . the old joiners where always making usefull things. another mate was a patten maker again loads of home made tools
I was taught to use the full length of the blade when sawing, this makes achieving a straight cut much easier
The problem in this case was using a japanese saw without japanese technique. While cutting, the back end of the japanese saw should not be cutting, only the piece closest to you. Once you reach 45 degrees, you flip the piece and cut down horizontally until your cutline is horizontal. Then, you drop you hands again cutting until you reach 45 degrees. Etc.
Since you’ve fought your bench racking several times. Does that mean the next build will be Ben making the Ultimate Guitar Building Workbench!?
Click bait title aside, that’d be a series I’d love to watch