Pool Heater Install and Set Up

Поделиться
HTML-код
  • Опубликовано: 21 окт 2024

Комментарии • 24

  • @geoffreyshaw2758
    @geoffreyshaw2758 Год назад +3

    After much research (so many people online complaining their heaters started leaking in 1-2 months!) I thought it would be best to put the heater before the chlorinator due to the corrosive nature of the chlorine, but you are the only one I've come across to specifically point it out and even suggest a check valve. Thank you this was very helpful.

  • @sdgelectronics
    @sdgelectronics 2 месяца назад +1

    You've probably already found out, but you don't want to be running full flow through your heat pump. You'll only get good efficiency with a specific temperature drop between inlet and outlet which will be listed in the specifications, so normally you'd install a bypass kit across the heat pump to divert most of the flow.

  • @markhutchinson8474
    @markhutchinson8474 8 дней назад

    Do you keep your pool up all year round

  • @LJsSavoryKitchen
    @LJsSavoryKitchen Год назад +1

    I'm think about this heat pump. your setup looks good. i would like to know what the water temp is that is getting sucked into he return and what the water temp is on the pipe that is coming back to the Pool. Also, I would recommend you burry the pipes so that no one can trip. Thanks for your video.

  • @sfranks88
    @sfranks88 5 месяцев назад +1

    solid video with a ton of great info

  • @TVJAY
    @TVJAY 5 месяцев назад

    How much does it cost to run? What kind of temperature increases are you seeing?

  • @SpinDocJoe
    @SpinDocJoe Год назад

    I think I have the same heater, a 20000 BTU model. Mine is branded Doel. The instructions for the control panel are terrible. Do you have a source for more detailed info. Were you able to switch yours to F from C?

  • @davidthompson7344
    @davidthompson7344 Год назад

    what is the fitting on your heater that reduces to the 1.5" flex hose? I can't find those anywhere😥

  • @tracyfischer7978
    @tracyfischer7978 Год назад

    I was thinking of this heat pump too. Either that or the fh135. I only have 110v going out to my pool so I have to get a smaller heater. My pool is 24foot round though and I know it's technically too big for this pump, but my pool is freezing and gets no sun. How many gallons is your pool and do you recommend this heater? Thanks for the instructional video!

  • @Red-lu3ku
    @Red-lu3ku 3 месяца назад +1

    Great job!

  • @thithamduong2223
    @thithamduong2223 Год назад

    Solar heater mat works but needs an independent pump to work better

  • @cordawg17
    @cordawg17 8 месяцев назад

    can you link the check valve you used?

  • @johnowenbuhay8969
    @johnowenbuhay8969 Год назад

    Hi. Do you have the link for the black rubber adapter you used?

  • @dwayned5649
    @dwayned5649 Год назад +1

    what's the name of the hot/cold hose that runs from the filter to heater and then to pool please?

    • @smashengineeringoffical
      @smashengineeringoffical  Год назад

      I used the hose that came with the filter setup look at pool hose on Amazon it should come up

    • @davidthompson7344
      @davidthompson7344 Год назад

      I believe those are just 1.5" Intex brand flex hose

  • @marcogomez851
    @marcogomez851 Год назад

    Whats the white Intex inútil that u have next to the heather?

  • @jonketola7897
    @jonketola7897 Год назад

    Did you ground your fh120?

    • @smashengineeringoffical
      @smashengineeringoffical  Год назад +1

      yes i had to go grab grounding rod and some wire and clips. didnt film it because that part should be done by a professional .

  • @lorirotruck5450
    @lorirotruck5450 8 месяцев назад

    You jumped the entire beginning and assumed we know more than we do