This guy managed to make repair videos and provide clear angles of the procedures 10 years ago. This production is honestly better than 90% of the videos posted even today... My man Donyboy.. u also didnt age one bit, keep it up!
Thanks for these videos. Made repairing my 170 really easy. My chainsaw had stopped oiling the chain so I needed to strip it down and give it all an inspection and a thorough clean. The saw is 13 years old so I didn’t use Stihl parts with the exception of the worm drive as to do so made repair uneconomic. I replaced the fuel line and filter, oil feed line and filter and the worm drive for the oil pump. Cleaned it all up and now it’s back to full health.
@EssedariusMaiestas there should be a L H screw and a third screw to set the idle. i think the replacement carb kits are as follows MAJOR REPAIR KIT: RB-31 MINOR REPAIR KIT: GND-21
Hi Don, your video instructions are perfect. I have to repair my stihl ms 180 who is more than 15 years old. I can follow you for 100%. The spare parts are ordered and I hope next week that the machine is running again Thanks !!!
@nyta2006 take the muffler off and look at the piston and rings to make sure it is not scratched and that you have good compression. you might have to replace the carburetor kit
Don, Thank you so much for this video! You are clear and and very knowledgeable! I was able to follow you 100% of the way and have repaired my stihl chainsaw. I am not very confident with machinery or repairs but this step by step was spot on! Thank you so much and I subscribed. Thank you again!
Great video. I used it to replace the duck bill valve that fell out. Can't figure out why that would happen. My dealer had it in stock for a couple of dollars. This helped me disassemble and reassemble it. The torque screw for the chain break lever broke when I screwed it out though. Oh well. It seems 180C has a lot of little things like this that go wrong. Never had to worry with the old 180.
Needing some help reassembling the throttle trigger assembly on my MS 180c Mini Boss. Not sure how the spring goes. Thanks in advance. Great video's would have saved me som time if I found these first.
Thanks, I pulled and cleaned carburetor, but didn't have to do fuel line carb screen was half full of dirt, but just cleaned it in soapy water, blew it clear and reassembled and runs like a top. Thanks for all your videos,, they really help. Take care
This guy managed to make repair videos and provide clear angles of the procedures 10 years ago. This production is honestly better than 90% of the videos posted even today... My man Donyboy.. u also didnt age one bit, keep it up!
❤p❤ let l❤ook
Thanks for these videos. Made repairing my 170 really easy. My chainsaw had stopped oiling the chain so I needed to strip it down and give it all an inspection and a thorough clean. The saw is 13 years old so I didn’t use Stihl parts with the exception of the worm drive as to do so made repair uneconomic. I replaced the fuel line and filter, oil feed line and filter and the worm drive for the oil pump. Cleaned it all up and now it’s back to full health.
@EssedariusMaiestas there should be a L H screw and a third screw to set the idle.
i think the replacement carb kits are as follows MAJOR REPAIR KIT: RB-31
MINOR REPAIR KIT: GND-21
Thanks Donyboy. Just picked up a 180 in new condition with a fuel leak, this will be a big help.
Hi Don, your video instructions are perfect. I have to repair my stihl ms 180 who is more than 15 years old. I can follow you for 100%. The spare parts are ordered and I hope next week that the machine is running again Thanks !!!
@nyta2006 take the muffler off and look at the piston and rings to make sure it is not scratched and that you have good compression. you might have to replace the carburetor kit
@nyta2006 if there is an impulse line and or intake boot make sure to check them for cracks,
Excellent video. The camerawork is really good. Thanks for the help.
Don,
Thank you so much for this video! You are clear and and very knowledgeable! I was able to follow you 100% of the way and have repaired my stihl chainsaw. I am not very confident with machinery or repairs but this step by step was spot on! Thank you so much and I subscribed. Thank you again!
@EssedariusMaiestas put a new carb kit in it, u may want to ajust the idle screw first to see if that will do the trick
thank you for your video it saved me $249.00 for a new ms 180.
@jessevardaman thanks for watching!
@awags76 i have vids of carb repair for this saw and it shows how to re-assemble thr throttle trigger
Thanks for the video. My saw didnt run good.
Took the fuel line out and there was the problem, almost split in half
Brilliant clear video, many thanks
Great video. I used it to replace the duck bill valve that fell out. Can't figure out why that would happen. My dealer had it in stock for a couple of dollars. This helped me disassemble and reassemble it.
The torque screw for the chain break lever broke when I screwed it out though. Oh well. It seems 180C has a lot of little things like this that go wrong. Never had to worry with the old 180.
@EssedariusMaiestas what model do u have?
@jessevardaman video is in the works
Nice video. Thanks! Very succinct and well photographed.
Watching in 2020 thanks first sthil I've worked on
Needing some help reassembling the throttle trigger assembly on my MS 180c Mini Boss. Not sure how the spring goes. Thanks in advance. Great video's would have saved me som time if I found these first.
Great info very easy to follow you thru the removal thanks
WELL DONE AGAIN DONNYBOY73 THANKS AGAIN
@EssedariusMaiestas can u tell me what carb it has, it will be ZAMA, WALBRO OR TILLOTSON, 1 OF THE 3
I like your videos they are straightforward and no bulshit
Rubber Fuel Hoses Hardens over time. If it is loosely fitted on the Carburettor Inlet Pipe Barb OR the Fuel Tank Hole To Hose Fit.
@Smallgasengine1
Yeah, it is. My uncle has the same saw and it runs out of gas fairly fast. Other than that, it's a great saw.
Donyboy 73 do you have a video how to change a oil line, and check the pump oil if is working properly on stihl ms 180 chainsaw
not yet, I have to edit the video
This video was made when I was born, Now i'm watching it to repair a chainsaw. Full circle
Thank you!!
Thank you very much, l'll wait the video!
Tq sir..i have the same problem with my ms180. Tq sir
Perfect, thanks for posting this .
Hi Don, Does the 170 have the same slide out tank? thanks.
yes
Thanks, I pulled and cleaned carburetor, but didn't have to do fuel line carb screen was half full of dirt, but just cleaned it in soapy water, blew it clear and reassembled and runs like a top. Thanks for all your videos,, they really help. Take care
where is the adjustment oil screw for the 171 model its feeding to much oil
POP UP THE CHOKE LEVER! THANK YOU!!! hahaha 😄😂🤣
Great video shit camera. But the greatness of the video makes up for that big time!!!!!!!!
yes one of my first videos lol