Thanks to you I build my first rc tank from nearly similar pieces . Tiger H/F mixed sets and desert colours 1:16 scale. Keep going. I love your videos. So much quality
Well, the finished car looks amazing! I have to admit that I was a bit skeptical when you mentioned you were going to repaint it. It looks great in black. I've picked up one of those vintage Monogram 1/8th scale model Vettes (the '82 Collector Edition) that I'm planning to remake into a proper RC. Doing it your way seems so much simpler. Also, I own a 1:1 '09 Mustang GT 5-speed (the only Ford I've ever owned) and I love the car. It has aftermarket exhaust; that V8 sounds incredible. Great video, as always. Cheers!
Good, creative project!! Hey, I've actually got a Top tip for you... When dealing with Hot Glue - simply drip some Denatured Alcohol over the Parts, and within 10 seconds - the Glue CLEANLY separates, with no damage to either Bit!! 😳😉 (Unless possibly, one of the Parts was painted with Acrylic Paint) It just easily releases the bond. Try it on scrap bits... See how it works! 😉 Carmine ✈🚂🚙
You are right, that Steering is a bit poor... With your high level of skill, you could easily make a long enough Servo Horn - that doesn't interfere with anything underneath. 😉
I read this on a forum. have you tried spraying a light dust of Plastic Weld on ABS bodies to make them tacky ready for paint.. Very light mist and do not touch it.
An interesting thought, I can imagine it'll make the surface a bit rough if left to dry. Getting it even so it doesn't pool might be a bit tricky though
@rcmojotv hi, I have the same model, but the newer one in blue. Can you show how to disassemble the rear wheels? I want to make it drift so I can not open the engine house. I don’t know howto and I don’t want to break my model. Best Regards😊🙏
dear creator of the RC Tuned up Model of the Gt500, where can i Buy your Servo CNC machined Plastic Parts for my Rastar car? Do you sell a complete set with stearing motor, electrics, and Remote control ? thx for the great review allready found MG90S Micro Servo Goolsky turbo racing 91803g VT 2,4 ghz and whats the name of the ECU? thx
Hello. Is there possible to get the print file for that servo box please? I have made same rebuild, but my solution of steering is not as good as yours and I would like to upgrade it same way. PLease, let me know. Thank you...And thanx for great vids ofc.
Here's the part on Thingiverse: www.thingiverse.com/thing:3971740 There's an order this printed that'll give you a list of places that can print it for you. Make you you look for reviews of the manufacturers
Looks like I never got as far as uploading the GT500 STLs, I'll see if I can get them up tonight. If I can they'll pop up at www.thingiverse.com/Beige/designs
If you're a bit mechanically minded the price of entry is comfortably under £200 now. Once you get going the time saved compared with hand cutting and carving more than makes up for the cost.
Thanks to you I build my first rc tank from nearly similar pieces . Tiger H/F mixed sets and desert colours 1:16 scale. Keep going. I love your videos. So much quality
Your conversations are always amazing!
Why do you not have more subs by now, I’ve been watching ever since you built the tt01.... such good production quality
Trueee
Just like the xr311
That was just great
Shows everything step by step
What a cute little conversion, makes me want to try some too!
just found your channel not sure how i missed it i have been doing toy to hobby grade conversions for years and love it subscribed and great work
Amazing video - exactly what I was looking for - Hoping to try this mod
You are seriously undersubscribed for the quality of your videos
Agreed !!
I thought it was amazing when we passed 100 subs
Car looks much better in black. Plenty of pavement fun good job.
Well, the finished car looks amazing! I have to admit that I was a bit skeptical when you mentioned you were going to repaint it. It looks great in black. I've picked up one of those vintage Monogram 1/8th scale model Vettes (the '82 Collector Edition) that I'm planning to remake into a proper RC. Doing it your way seems so much simpler. Also, I own a 1:1 '09 Mustang GT 5-speed (the only Ford I've ever owned) and I love the car. It has aftermarket exhaust; that V8 sounds incredible. Great video, as always. Cheers!
1/8th, wow, that'll be quite the project
you deserve more subscribers.. nice video !!
Good, creative project!!
Hey, I've actually got a Top tip for you...
When dealing with Hot Glue - simply drip some Denatured Alcohol over the Parts, and within 10 seconds - the Glue CLEANLY separates, with no damage to either Bit!! 😳😉
(Unless possibly, one of the Parts was painted with Acrylic Paint)
It just easily releases the bond. Try it on scrap bits... See how it works! 😉
Carmine ✈🚂🚙
You are right, that Steering is a bit poor...
With your high level of skill, you could easily make a long enough Servo Horn - that doesn't interfere with anything underneath. 😉
I would do the same, I got one like it (same chassis different brand name) n it fits perfect on my tt-02 chassis
What brand name is yours? This chassis is much smaller than a TT-02.
Printed a servo holder works a treat. Did u do a servo mount for the landy sports please ?
Good job 👍. 1:14?
That's what it says on the box, it's probably a bit over sized though
I just got a braha Bently, for 17$.... Looking to do this same conversion
are there any stronger motors in that size? apart from the steering, a "big" motor would be very scale :D
nice conversion - I really like it
Exactly. I thing you can get powerful nerf gun motors of the same size
I read this on a forum. have you tried spraying a light dust of Plastic Weld on ABS bodies to make them tacky ready for paint.. Very light mist and do not touch it.
An interesting thought, I can imagine it'll make the surface a bit rough if left to dry. Getting it even so it doesn't pool might be a bit tricky though
HI, it's possible to changue de back motor? i can't desasemby that part for changue it
@rcmojotv hi, I have the same model, but the newer one in blue. Can you show how to disassemble the rear wheels? I want to make it drift so I can not open the engine house. I don’t know howto and I don’t want to break my model.
Best Regards😊🙏
can you link the products you used in this video?
Did I hear him right what does mustang have to do with Knight Rider
Check out Knight Rider 2008 where KITT was a Mustang that could also transform into other Fords
dear creator of the RC Tuned up Model of the Gt500, where can i Buy your Servo CNC machined Plastic Parts for my Rastar car? Do you sell a complete set with stearing motor, electrics, and Remote control ? thx for the great review
allready found
MG90S Micro Servo
Goolsky turbo racing 91803g VT 2,4 ghz
and whats the name of the ECU?
thx
nice mods but prefer not to used 3d print component in case dont have 3d printer
Aside from the cosmetics and ok, the battery, what's the point of all this? Is it faster now, does it steer better, you didn't even show it in action?
Hello. Is there possible to get the print file for that servo box please? I have made same rebuild, but my solution of steering is not as good as yours and I would like to upgrade it same way. PLease, let me know. Thank you...And thanx for great vids ofc.
Now I noticed you put the stl file on thingverse...so, no problem :-)
Is there any way i can get the new steering servo mount. Just ordered a mustang for use in the states
Here's the part on Thingiverse: www.thingiverse.com/thing:3971740
There's an order this printed that'll give you a list of places that can print it for you. Make you you look for reviews of the manufacturers
do you have the stl file for that im doing one and i cant figure the servo mount out
Looks like I never got as far as uploading the GT500 STLs, I'll see if I can get them up tonight. If I can they'll pop up at www.thingiverse.com/Beige/designs
@@RCMojoTV Hi, I have a Ferrari 458 Italia of the same brand. I would like to know if you could make me a support for servo?
I need the 3d file of the servo mounts, can i get it ?
There you go :)
www.thingiverse.com/thing:3971740
You know what. I relate myself to you.
I swear u can find anything on RUclips
Aku punya rastar yelow
not everyone has a 3d printer .......so discouraging
If you're a bit mechanically minded the price of entry is comfortably under £200 now. Once you get going the time saved compared with hand cutting and carving more than makes up for the cost.
This was too much man, just get a kit.