@@loganmcardle9438 I used the prybar tool and pushed it in. I can’t remember if I had the tube fully seated or if I pushed the grommet on and then finished pushing the tube down
If you go to 5:32 in the video it shows you the style of hose clamp and no it doesn’t have wings. It’s like those but with out wings. It will most likely still be on your 90 when you pull it out of the tank.
You can put in a whole new pickup much easier. Perfect spot in front of the Battery, I did this on an 853 and it works great! Nice little Machine, but purposely built to discourage D I Y.
Just for info; Sometime near 2019 Bobcat changed the "problematic" check ball pick up tube design and switched to a "primer bulb with Check ball in "it.
How did you do the hose clamp on the 90 going into the tank with rubber grommet going over it? Is that a pinch clamp with the clips that stick out cut off so the rubber grommet slips over it? Thanks for any info. ( I’m not rich Btw, it’s my buddy’s channel)
If you go to 5:32 in the video it shows you the style of hose clamp and no it doesn’t have wings. It’s like those but with out wings. It will most likely still be on your 90 when you pull it out of the tank.
![Quando Rondo - Grow Up [Official Music Video]](http://i.ytimg.com/vi/8zFnCg3BO4Q/mqdefault.jpg)
Thanks a lot for posting this. Helped me a bunch on a T870 and I definitely made your custom pry tool
hey man i’m working on getting this damn grommet back in the hole of my t870 and having a hell of a time. how did you get it back in?
@@loganmcardle9438 I used the prybar tool and pushed it in. I can’t remember if I had the tube fully seated or if I pushed the grommet on and then finished pushing the tube down
Thank you for the video. Just replaced my pickup using your method. Easy. Made my day
No problem sir I am glad that it helped.
The last machine I did this on was a bobcat 863 it was the exact same steps as this video.
If you go to 5:32 in the video it shows you the style of hose clamp and no it doesn’t have wings. It’s like those but with out wings. It will most likely still be on your 90 when you pull it out of the tank.
You can put in a whole new pickup much easier. Perfect spot in front of the Battery, I did this on an 853 and it works great! Nice little Machine, but purposely built to discourage D I Y.
Just for info;
Sometime near 2019 Bobcat changed the "problematic" check ball pick up tube design and switched to a "primer bulb with Check ball in "it.
How did you do the hose clamp on the 90 going into the tank with rubber grommet going over it? Is that a pinch clamp with the clips that stick out cut off so the rubber grommet slips over it? Thanks for any info. ( I’m not rich Btw, it’s my buddy’s channel)
If you go to 5:32 in the video it shows you the style of hose clamp and no it doesn’t have wings. It’s like those but with out wings. It will most likely still be on your 90 when you pull it out of the tank.
@@chrisp5712 ok thanks