How To Remove NP231J Transfer Case Jeep TJ
HTML-код
- Опубликовано: 25 авг 2024
- Get a NP231 Rebuild Kit Here amzn.to/2EyQ7DT
In Canada get the NP231 Rebuild Kit here amzn.to/2SItj9J
Todays video is how to remove the Transfer Case np231j from your Jeep tj Wrangler. You may want to remove the NP231j transfercase for rebuilding or other modifications.
Thanks for posting this video. I have the same year 03’ Sahara with the auto transmission as well. Your video is the only one with automatic. Saved me a lot of time!
So helpful as i'm new to working on vehicles. Thank you so much. Nice to see exactly how you jacked up the tcase :)
I have an 86 K30. Totally different transfer case but this video did help
I'm stuck on the last two bolts blocked by the catalytic converter. Hard to get any leverage and I can't break them free. Any recommended tricks or should I just remove the exhaust?
me to no one talks about how fking hard they are to get to
I used 1/4 ratchet with 9/16 socket. It’s tight but if you line it up just right you can break it loose
Why didn't you drain the transfer case first? Or is that just leftover fluid?
So I have a 95 wrangler 4cy 2.5 with the 231 transfer case it's bad what other jeeps would be interchangeable
Awesome, thank you
Loved ur camera angles, quick and to the point. So many ppl dont get good pictures, but yours was very clear. Sadly, I stripped one of my top bolts, now stuck on that. Not sure if putting the other nuts back on, may help relieve pressure on the nut up top? Or does it matter?
get a helicoil and that will fix it
Would the manual and auto trans be the same if it were the 241OR
Totally off subject of your video, but do you recommend redoing all of the power and ground leads with 2 gauge wire? By the way, your early videos on removing/installing the transmission mount and transfer case were super helpful when I worked on my TJ. I went with the Novak upgrade as well. This LS swap is going to be bad-ass when complete!
I would personally wire the vehicle according to the current being used.
BSK Garage Thanks Jerry.
So, is it true on all Jeeps that the skid plate isn’t the only thing holding the transmission and transfer case up? There’s another bracket underneath? I need to replace my transfer case and was wondering about how to do it
So I have a 95 jeep Cherokee and a np231J transfer case , and we found a hole in the bottom of it kinda near where the chain is and was wondering what your thoughts was about it
Hard to say without physically seeing it or taking it apart. But if the chain is loose enough it will wear though the case
Would I need to do this if I’m only doing a SYE?
2:55 "your linkage is going to be different" as in "your linkage is going to be an absolute over-complicated nightmare"
Excellent video - thank you very much. Getting ready to drop my transfer case for some maintenance. I do have one question though and that is about the fluid (ATF) you show draining out between the transmission and the transfer case. I do not believe the two share fluids so this should pretty much indicate a bad seal correct - either bad transmission output seal or bad transfer case input seal. I hope that all makes since and look forward to hearing your opinion
did you maybe figure out which fluid it was? i’m about to do mine soon and wondering if i should worry about my transfer case or transmission leaking fluid and which to refill
@@marcosderosa8492 on mine - my auto transmission output shaft seal was bad when I dropped my transfer case so I had to replace it as well
ratcheting wrench best tool ever lol
Sure is for the most part sometimes they are too big to fit in right places
What a pain.