Creality Falcon2 How to easily engrave glass and powder coated tumblers
HTML-код
- Опубликовано: 6 окт 2024
- In today's video, we are going to have some fun engraving on round things! This is one of the easiest rotary attachments I've used. I should not be surprised as the Creatlity Falcon2 has been one of the easiest engravers I've had the pleasure of working with.
I hope you enjoy this video. Leave a comment if there are any questions you have. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Psalms 103:12 (NIV)
as far as the east is from the west, so far has he removed our transgressions from us.
➤ Please go checkout these partners
RZ Mask: tinyurl.com/5n... (Use WOLFRIDGE15 for 15% Off)
Ack's Abrasive & Polishing Paste: tinyurl.com/b6... (Use WOLF15 for 15% Off)
Starbond: tinyurl.com/9t... (Use WOLF15 for 15% Off)
Taytools: lddy.no/191nm
➤ Ways you can help support my channel:
Subscribe: tinyurl.com/ms...
Purchase Products: tinyurl.com/mv...
View the Tools That I use: tinyurl.com/yv...
➤ Tools & Supplies I Used (*)
Creality Falcon2: Creality Official Store: bit.ly/3Phkl4a (Use FN22WRW for $50 off)
Amazon: tinyurl.com/bc... (Code: 20FALCON (20% Off)
Creality Accessories: store.creality...
Lightburn: lightburnsoftw...
Laser Engraving Marking Paper: amzn.to/3s3Alxf
Tumbler: amzn.to/3E5PUax
Disclosure: Some of the links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
➤ FOLLOW ME HERE
website: www.wolfridgewo...
Instagram: / wolfridgewoodworking
Email: eparker@wolfridgewoodworking.com
Ed Parker
P.O Box 1893
Queen Creek, AZ 85142
#laserengraver #crealityfaclcon2
This was helpful! Couldnt find anyone else with the settings for the 22w to base my test range around ❤
I just got this laser in my workshop and am browsing other videos on it. Your video is great! It's clear, concise, and very helpful!
Were you using the 22W or 40W setting in this video?
Super informative thank you!
Complete Noob here. Do you have a video on how to center your laser on your object? I've seen a coup-le other videos but it wasnt for the Falcon2. I have the 40 watt.
Did you get a reply on this? I am also a newbie and have the 22w
Really nice video demonstrating the possibilities with the laser engraver. I saw in a previous video (could also be more recent from your standpoint) that you had an xtool 10W (?) laser cutter. Did you swap out the xtool for the creality or vice versa? Why?
Interesting. I have the same rotary and the falcon 10w and it says change your settings..
We’re did you get the extra legs? Mine only came with 2 sets.
Hello, your video it’s very helpful.!! But I have a question.! Can you engrave with color on the glass?
Nice review, Ed!
Thank you sir! - Ed
I just purchased mine and I will appreciate if u help me with some tips on how to engraved better
hello I like your video my question is how can you put the design on lightburn to engrave the tumblers I am new at this .
Nice work. The discount links do not work. Have they expired?
good job mate. did you use the air on or off when doing those tumblers and glass? cheers
Great video. Is this the 22 or 40w?
My images were all stretched and I don’t know why, any suggestions?
what are the the settings I have a falcon2 12W laser engraver i am ne at this can you help me on this matter GOD Bless
Hello, how are you, at minute 5.40 you started recording on a glass glass, so would it be possible to do it on a glass candle as well ?
For the second tumbler, did you turn the graphics in Lightburn to have the text horizontal when the tumbler is upright? I just did my first one with a cheap tumbler I got at Walmart and the text was vertical even though in Lightburn it was horizontal. Just wondering if you discovered that after your first one?
I need ur help sir i just got mine and am finding it hard yet to do the setup
Some videos report the rotary attachment loosing step. have yo had this issue ?
The rotary attachment out of another machine at 1:30......would you be able to share where to find that? Slipping with the Creality one is a problem.
Did you get a reply on this? I too would like to get this attachment if possible
I did not.
@@AmyWeller it's the rotary pro kit. it's sold by creality.
@@dancrawford5501 it's the rotary pro kit. it's sold by creality.
mass production to produce the machine?
Can I use these settings on a 40w ?
This video caused me problems. Also the output needs to be mirrored in the rotary setup in order for the letters to come out correctly. Also for the Creality Rotary you need the roller diameter to be 17mm and the mm per rotation to be 53mm. Please update this video. Thankfully I did my learning on an old tumbler that I didn't really care about.
Thank you for watching! It's strange that you had problems. I've never performed the rotary setup in LightBurn or made any changes. I've engraved a lot of tumblers and glassware without any issue. I'm not sure what might be different between our setups. - Ed
0:06
doesnt engrave metal AT ALL word plastic sure metal LOL no
It does work pretty well on stainless steel for me