i am very proud of your good quality work in making your wire splice connections,,,, not that cheap crap way of twisting bare ends together while wrapping with electric tape which can over time fall off,,,, great work good job you do it the same way as i do,, place heat shrink tubing on wire then make solder connection, slide heat shrink tubing down over solder connection, apply heat stink tubing over connection,,,,,,,,,,, now what i do is i prefere i use 2 pieces of heat shrink tubing to make the insulating layer twice as thick. good job guys keep up your good work. Patty
Question for Tom, I have an icebear fuerza as well. Got a nice sequential integrated tail light for a Grom myself. I installed it with no issues but am getting a crazy flicker from the tail light at idle. Tried putting a capacitor and resistor(separately)in parallel to the tail light circuit with no luck. Does your tail light flicker at idle as well? Just curious in case I have to send it back. Thank you
By any chance would you happen to know why the running lights don’t work, on the icebear? I’ve tried everything new switch looking for a short new bulbs any advice would be appreciated!
to make the chain work i got www.amazon.com/PBI-Sprockets-Aluminum-Honda-Sprocket/dp/B01BDE1DL6/ref=sr_1_fkmr0_2?s=automotive&ie=UTF8&qid=1507252033&sr=1-2-fkmr0&keywords=428+31T+SPROCKET www.amazon.com/Wingsmoto-Sprocket-428-17T-Motorcycle-Dirtbike/dp/B010UQK6NY/ref=redir_mobile_desktop?_encoding=UTF8&psc=1&ref_=yo_ii_img
i want to join bang bang scooter gang i live in FL and i am a awesome web developer and would donate my skills and hosting resources to build a website for this i have a icebear fuerza 125cc manual chain driven i have allready added a $80 lithium ion battery that ways less then my cellphone well worth the extra coin and 1 day shipping.. i got a 16 tooth sproket i should have ordered the 17 now that i watched your videos i have videos and stuff to send also let me know if where and how i can join up with you guys :)
i am very proud of your good quality work in making your wire splice connections,,,, not that cheap crap way of twisting bare ends together while wrapping with electric tape which can over time fall off,,,, great work good job you do it the same way as i do,, place heat shrink tubing on wire then make solder connection, slide heat shrink tubing down over solder connection, apply heat stink tubing over connection,,,,,,,,,,, now what i do is i prefere i use 2 pieces of heat shrink tubing to make the insulating layer twice as thick. good job guys keep up your good work. Patty
Hi do you need a flasher relay in order for new LED turn signals to work?
awesome help. i just installed my new break light turn signal in one.appreciate it.
ilokozBuilt sweet and thank you!
Do u know the lighting pattern for brakes and turn signal for the boom Vader? Or is it the closest to the grom?
Thanks u guys so much 🙏🏽
did yall wire straight light to harness or wired to the clip connector ?
On the Hellcat does it have a running light or is it just a brake light standard.
Question for Tom, I have an icebear fuerza as well. Got a nice sequential integrated tail light for a Grom myself. I installed it with no issues but am getting a crazy flicker from the tail light at idle. Tried putting a capacitor and resistor(separately)in parallel to the tail light circuit with no luck. Does your tail light flicker at idle as well? Just curious in case I have to send it back. Thank you
By any chance would you happen to know why the running lights don’t work, on the icebear? I’ve tried everything new switch looking for a short new bulbs any advice would be appreciated!
Question where do you find tail light replacements for the ice bear ? i cant find anything to fit the ice bear, great vid btw
Hello quick question, my turn signal stays steady on when i turn it on, it when doesn't blink, what could the issue be?
Where do you buy your mods? Also I need a new battery and can’t find one!
L❤ve this content..!
Why is the gear shifter lever for the ice bear so lose ?
Is there a trick to the initial startup?
I have been looking at the Tao Tao hellcat do you know if stunt bars work
like fatty bars?
BANG BANG SCOOTER GANG like 12 o clock bars or scrape bars
Yeah they make them for the grom and they will fit
BANG BANG SCOOTER GANG thanks for saying
to hit 65 of the hellcat do i have to replace both sprockets or just the 17t for the front? also have you had any problems with the chain
to make the chain work i got
www.amazon.com/PBI-Sprockets-Aluminum-Honda-Sprocket/dp/B01BDE1DL6/ref=sr_1_fkmr0_2?s=automotive&ie=UTF8&qid=1507252033&sr=1-2-fkmr0&keywords=428+31T+SPROCKET
www.amazon.com/Wingsmoto-Sprocket-428-17T-Motorcycle-Dirtbike/dp/B010UQK6NY/ref=redir_mobile_desktop?_encoding=UTF8&psc=1&ref_=yo_ii_img
Is there a link for that luggage rack on the hellcat? I love it
No not that I know of but comes with the bikeb
How did you end up running the fuel line on the hellcat?
Danny Everclear didn't have too
how do u install a license plate light on a ice bear
Please
i want to join bang bang scooter gang i live in FL and i am a awesome web developer and would donate my skills and hosting resources to build a website for this i have a icebear fuerza 125cc manual chain driven i have allready added a $80 lithium ion battery that ways less then my cellphone well worth the extra coin and 1 day shipping.. i got a 16 tooth sproket i should have ordered the 17 now that i watched your videos i have videos and stuff to send also let me know if where and how i can join up with you guys :)
Can I join the scooter gang
no running light? no way man