Your GlideCam is awesome ! Can you please tell us where did you buy the parts you used ? (Store or website...) I'll try to write a part lists for interested people under the condition I can find out what you used !
It would be So Amazing to have an explained tutorial for this AMAZING DIY glidecam. Certainly it's the best DIY I've seen, so nice and neat, and it would be so good to have a longer tutorial covering every single part of it. REALLY god job!
Davvero, davvero, davvero complimenti Federico...davvero un'ottima glidecam...mille volte meglio di quella che avevo realizzato io in legno che era una vera porcheria! Se hai la partita iva potresti pensare di commercializzarle!
pandorasvase could you tell us at least the rod diameter, aluminium tube diameter and what are the black bits that are mounted on top and bottom of the rollerskate wheel thanks!
ciao.. fantastico tutorial ...credo che sia molto utile per delle mini riprese anche con una reflex.. volevo solo farti una domanda.. dove hai reperito l'archetto che avviti alla ruota ? io in tutti i ferramenta non ho trovato nulla di simile .. mi sa che dovrò smontarla dalla grondaia di casa comunque ottimo lavoro
Ciao, ottima realizzazione !!! Complimenti. Ho letto che hai usato solo 2 cuscinetti a sfera, mentre ne vedo di più: 3 nella fila in basso, e poi quelli più piccoli neri nella fila in alto. Potevi spiegarmi che cosa sono? Grazie
Ciao complimenti la glidecam meglio fatta home made che ho visto fino ad ora. Posso chiederti la lista dei pezzi? o almeno la dimensione della barra filettata e della mezza luna che tiene la ruota? Grazie mille
bonsoir de la France très bien ta vidéo. dommage que tu ne mes pas les dimension des boulon ,de la tige et des tube. si tu peut me donne ces info merci en Français
hi good afternoon !! You sell this kit? as would be the fast shipping to Brazil? I need this stuff for the September 22, think you can send? as would be? hugs
Hi guy, firstly your DIY Glidecam a very awesome to me if I can made it one. Can you list of hardware? All names EVERY parts? I hope you can list that things. I am very grateful if you do so. Thanks
Hi there ! I try to find what are the differents parts of this, and made from a screen picture a list. This list isn't accurate, and is in french (sorry). It need some improvement, wich I will post here because I will try to made this steadicam in few weeks. I will do my shop in the BHV of Paris (France) and in Decathlon for ball bearing and rollerskate wheels if I can found these. I think you could found all of this list in a do-it-yourself store. The link of the list : //// OLD LINK/// dl.dropboxusercontent.com/u/110290330/PentaxKparK/steadicam%20DIY.jpg NEW LINK (/!\ in French sorry) : www.dropbox.com/s/dsg31pgb4c47dgs/steadicam%20DIY.jpg?dl=0 I don't find for the moment : photo plate for 1/4 mount (plate made by hand ?), the two black bits are mark as butterfly bolts/nut but I don't know if its really that. The diameter are estimate (8mm for the rod, 4 or 5 mm for the small parts, the pipe as to be under the diameter of the rings, and above 22mm wich is the diameter of the ball bearing, so 22mm for the intern diameter seems good, the electrician adhesive paper is here to fit to the intern diameter of the pipe, the pipe is surely made of alumium, and is similar with a bike pipe). The archer is made by hand by pandorasvase so it could be changed to two L metal angle. That's all for the moment. see you soon perhaps with a video if I found some time to build this and film it. +pandorasvase +Daisy Pascua+Fala Jr+Rick Bomhof
ciao sarebbe davvero utile tu inserissi una descrizione di tutti i pezzi e lunghezze che hai usato! sarebbe davvero il top! complimenti comunque x l'ottimo risultato! penso proprio ti copierò il progetto!!!
L'ANGOLO DEL FEEDER... Ciao, mi spiace ma non ho mai fatto un progetto e un'elenco delle parti. Mano a mano che mi servivani i pezzi mi ingengavo per risolvere i problemi, ciao!
per favore per favore, you really need to make a tutorial for this mate, you don't know how helpful it will be for people with less budget who can't get that smooth video look without a 1000$ expensive equipment.
150k views ...... around 115 comments. ... everybody asking the same thing. " parts " so everybody could try and do the same ..... look out for your viewers..... we all thinking that you can help us somehow
so wanted to replicate this the best i can. sins the barring looks like a standart skater barring, witch its 22mm in outer diameter. with a cenert diameter of 8MM so you will need a M8 threaded rod of 30-32 CM(bets bet from the video. i got a 100CM for 4€ for the handle i got a old bike handlebars cut it in 2. gives it a curve tho bit is fine i hope. had to make the diameter a little bigger but i think it well depend on the handlebars you will find. Got it for free tho i need to order a barring for this Handel witch is 2-3€ for the wheel i went to a skate shop got a skateboard wheel and not a in line skate, but only different is its wider. got this used for free for the mount around the wheel i used 2 L plades normaly used for wood work. got 2 for 2€. and a Rectangle metal place with screw holes in. is was 1€ and i went for one with a center hole for ease. tho i had to drill it bigger :) miscellaneous Bolts and nuts i have got free from work. but will run you max 5€ this is just the bare minimal and its not totaly done yet. but i will make a video of this soon if it works but my total spend so far is around 15-20€
Bel video, però la maggior parte dei pezzi è introvabile in un ferramenta, e di sicuro viene a costare più di trenta euro (solo i cuscinetti ad aria costeranno più di 20 euro).
Ciao, innanzitutto i cuscinetti sono a SFERE e non ad aria, li puoi trovare da DECATHLON e costano 9,95€ di 8, quindi 1,24375€ di uno. Ne ho usati 2 e quindi 2,4875€. Per il resto ho comparto tutto da OBI e EUROBRICO, sugli scaffali trovi tutto basta aprire gli occhi, ciao.
would you mind posting the sizes of the screws etc? Thanks! Awesome work!
i'm only wondering why don't you post a part list after all these comments requiring one...... just saying
Do you have a list of hardware? All names EVERY parts? Where can you find every thing?
would you mind making a list for all the parts used?
Yes, please add the list of parts :)
I'm sorry but I've never done a complete list of parts.
pandorasvase What parts did you use ? D:
were is a parts list?
Your GlideCam is awesome ! Can you please tell us where did you buy the parts you used ? (Store or website...) I'll try to write a part lists for interested people under the condition I can find out what you used !
It would be So Amazing to have an explained tutorial for this AMAZING DIY glidecam.
Certainly it's the best DIY I've seen, so nice and neat, and it would be so good to have a longer tutorial covering every single part of it.
REALLY god job!
I agree. This a good quality video. If only there was a list of parts.
Any possible for you to list down all item that you used? I wish I can build it one for my own.
Looks professional.
Where does the camera fit onto the handle?
can you please list all the materials??
Davvero, davvero, davvero complimenti Federico...davvero un'ottima glidecam...mille volte meglio di quella che avevo realizzato io in legno che era una vera porcheria! Se hai la partita iva potresti pensare di commercializzarle!
do you have a part list
did you just screw in 2 screws into the plastic rollerskate wheel? is that a stable connection with sufficient flexibility at the same time ?
Can you tell us what materials have you used, please?
What kind of pipe are you using for the handle? size?
what did you use to gold the 'gimball' assembly to the rod?
Well this is great. Now you've made a glide cam everybody wants to create, they just don't know how to because there isn't a parts list...
Rick Bomhof
I'm sorry but I never created a project and draws.
pandorasvase
could you tell us at least the rod diameter, aluminium tube diameter and what are the black bits that are mounted on top and bottom of the rollerskate wheel
thanks!
so this is a hey check out the Glidecam i got to put together but not gonna tell you from where i got it or anything..umm ok?..
Very nice. Will you please post or send privately the parts list?
Many thanks.
Nice job.
One year after, is it possible to post the list?
Thank's a lot.
Did you just use parts from an old scooter? Like the one little kids skate on?
Only the wheel is a piece of a rollerblade.
pandorasvase How does it look after a year?
It looks like it is just bolt screwed into rubber. No clearence appeared?
Could you tell me where you got this bent thing at 1:20 from?
could someone tell me what do you call that 2 black something at the bottom for the weights?
do you remember what size tools those were?
Can I get a parts list....great video
Superb DIY. This is what all DIY's should look like. Now list the parts with sizes and everything.
very nice and well build...seen the actual footy too of walking and running...fluid shots man...nice
what parts do you need to make this
Pls write it for me
can you tell me what did you us sizes parts ect please ?
Ottimo tutorial,pandorasvase hai una lista degli oggetti per caso?
Hey ;) Is there a list of parts available?
ok, i have seen the sample video (test) and its great!! awesome job, but where did you get all the parts and made it so good, is it from a company?
All pieces are DIY.
Except the rollerblade's wheel. :)
really?? looks so machined by a factory ready to sell :p great job man!!
I only used household tools. :)
ciao.. fantastico tutorial ...credo che sia molto utile per delle mini riprese anche con una reflex..
volevo solo farti una domanda.. dove hai reperito l'archetto che avviti alla ruota ?
io in tutti i ferramenta non ho trovato nulla di simile ..
mi sa che dovrò smontarla dalla grondaia di casa
comunque ottimo lavoro
Can i get list with parts witch i need to build this gldecam
+Luka Trpin me too
Nguyễn Chicharito I already build my own on a little bit harder way. :)
tell us the materials please.
list of parts pleases that would be great
what is ingrediest?
as you did this? Please instructions
Nice Video.........
I need parts list names in English.
Ciao, ottima realizzazione !!! Complimenti. Ho letto che hai usato solo 2 cuscinetti a sfera, mentre ne vedo di più: 3 nella fila in basso, e poi quelli più piccoli neri nella fila in alto. Potevi spiegarmi che cosa sono? Grazie
Hai fatto una lista di componenti? o almeno dove trovarne la maggiorparte?
Amigo tendrias los planos?
Lo siento pero no tengo ningún proyecto.
Ciao complimenti la glidecam meglio fatta home made che ho visto fino ad ora.
Posso chiederti la lista dei pezzi? o almeno la dimensione della barra filettata e della mezza luna che tiene la ruota?
Grazie mille
La barra filettata è di sicuro da 8mm (si adatta perfettamente ai cuscinetti da skate) e ad occhio e croce è di circa 30/35 cm.
what is ingredients
bonsoir de la France très bien ta vidéo. dommage que tu ne mes pas les dimension des boulon ,de la tige et des tube. si tu peut me donne ces info merci en Français
can you tell me the size OR give me some photo size Best Glidecam DIY under
hi good afternoon !!
You sell this kit? as would be the fast shipping to Brazil? I need this stuff for the September 22, think you can send? as would be?
hugs
I'm sorry but it is not a kit for sale.
and the measures?
can anyone help me translate the items needed here. i am very confused.
hello I see requests for a materials list Is it available ?
+George Boudreau
I found it thank you
could you please share it with the rest of us over here please?
Hi guy, firstly your DIY Glidecam a very awesome to me if I can made it one. Can you list of hardware? All names EVERY parts? I hope you can list that things. I am very grateful if you do so. Thanks
uno de los mejores ! resuelto con mucho ingenio ! te felicito !, a copiarlo je je je
this song got me like 0______0. just awesome dude, so creative! keep the good work up!
انت رائع عمل جيد ممكن تشرح لنا بفيديو كيف نحصل على المواد الأولية
Video fantastico, però potresti spiegare con un elenco i componenti usati, please?
Hi there ! I try to find what are the differents parts of this, and made from a screen picture a list. This list isn't accurate, and is in french (sorry). It need some improvement, wich I will post here because I will try to made this steadicam in few weeks.
I will do my shop in the BHV of Paris (France) and in Decathlon for ball bearing and rollerskate wheels if I can found these. I think you could found all of this list in a do-it-yourself store.
The link of the list : //// OLD LINK/// dl.dropboxusercontent.com/u/110290330/PentaxKparK/steadicam%20DIY.jpg
NEW LINK (/!\ in French sorry) : www.dropbox.com/s/dsg31pgb4c47dgs/steadicam%20DIY.jpg?dl=0
I don't find for the moment : photo plate for 1/4 mount (plate made by hand ?), the two black bits are mark as butterfly bolts/nut but I don't know if its really that. The diameter are estimate (8mm for the rod, 4 or 5 mm for the small parts, the pipe as to be under the diameter of the rings, and above 22mm wich is the diameter of the ball bearing, so 22mm for the intern diameter seems good, the electrician adhesive paper is here to fit to the intern diameter of the pipe, the pipe is surely made of alumium, and is similar with a bike pipe).
The archer is made by hand by pandorasvase so it could be changed to two L metal angle.
That's all for the moment. see you soon perhaps with a video if I found some time to build this and film it.
+pandorasvase +Daisy Pascua+Fala Jr+Rick Bomhof
Did you find out the parts? Because im gonna do it too. Thank you
its work ?? you can build this or not find the pieces??
great design.. please share the list items in ENGLISH version.. thanks :)
ciao sarebbe davvero utile tu inserissi una descrizione di tutti i pezzi e lunghezze che hai usato! sarebbe davvero il top! complimenti comunque x l'ottimo risultato! penso proprio ti copierò il progetto!!!
just gorgeous!
Needs one more axis of rotation - but otherwise really good!
Why? The rotation is in three axes, x, y, z.
ruclips.net/video/qbUg0PbddAg/видео.html
i thought this was a steady cam and a glide cam is on rails? but neither the less i like the build
Complimenti per l'ottimo progetto...sarebbe veramente utile capire l'elenco dei pezzi che hai adoperato
L'ANGOLO DEL FEEDER...
Ciao, mi spiace ma non ho mai fatto un progetto e un'elenco delle parti.
Mano a mano che mi servivani i pezzi mi ingengavo per risolvere i problemi, ciao!
awsome made, spetacular result, well done :)
very nice,.look professional..
come on man, give us a parts list. This is way to nice to not let us build it :D
per favore per favore, you really need to make a tutorial for this mate, you don't know how helpful it will be for people with less budget who can't get that smooth video look without a 1000$ expensive equipment.
Best DIY indeed, but a list of the parts would've been nice ...
looks more like a weapon than a glidecam
great job
Highly recommend watching this at 0.25x speed...
I almost want to thumbs down because no parts list, seriously. whats the point???
🤩🤩👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽Cool 👀😍😍
Man with 81,000 views you should make a kit and sell it.
150k views ...... around 115 comments. ... everybody asking the same thing. " parts " so everybody could try and do the same ..... look out for your viewers..... we all thinking that you can help us somehow
so wanted to replicate this the best i can.
sins the barring looks like a standart skater barring, witch its 22mm in outer diameter.
with a cenert diameter of 8MM so you will need a M8 threaded rod of 30-32 CM(bets bet from the video. i got a 100CM for 4€
for the handle i got a old bike handlebars cut it in 2. gives it a curve tho bit is fine i hope. had to make the diameter a little bigger but i think it well depend on the handlebars you will find. Got it for free tho i need to order a barring for this Handel witch is 2-3€
for the wheel i went to a skate shop got a skateboard wheel and not a in line skate, but only different is its wider. got this used for free
for the mount around the wheel i used 2 L plades normaly used for wood work. got 2 for 2€. and a Rectangle metal place with screw holes in. is was 1€ and i went for one with a center hole for ease. tho i had to drill it bigger :)
miscellaneous Bolts and nuts i have got free from work. but will run you max 5€
this is just the bare minimal and its not totaly done yet. but i will make a video of this soon if it works but my total spend so far is around 15-20€
well done!!!
thumb down for not putting a parts list
è molto interessante, grazie
Bel video, però la maggior parte dei pezzi è introvabile in un ferramenta, e di sicuro viene a costare più di trenta euro (solo i cuscinetti ad aria costeranno più di 20 euro).
impostore
Ciao, innanzitutto i cuscinetti sono a SFERE e non ad aria, li puoi trovare da DECATHLON e costano 9,95€ di 8, quindi 1,24375€ di uno. Ne ho usati 2 e quindi 2,4875€.
Per il resto ho comparto tutto da OBI e EUROBRICO, sugli scaffali trovi tutto basta aprire gli occhi, ciao.
pandorasvase hai ragione sfere; è difficile tirarti fuori le informazioni
ok ottimo ,, ci avevo provato anche io ma .. era a v!!! nonostante ho utilizzato un tronco che avevo in giardino per modellarlo ..
Ma sei di Padova! Siamo conterranei!
WOW !!
Ciao, l'archetto è fatto piegando a mano una sbarra di alluminio :)
Con un po di manualità e si riesce a calandrare senza macchinari :)