How not to disassemble Nikon d5100 camera
HTML-код
- Опубликовано: 13 май 2019
- I crashed Nikon mirror photo camera and decided to repair it on my own using teardown manual found on iFixit. But it has huge mistake that make me angry: I disassembled matrix unit and dust came inside. I'd cleaned it using special matrix cleaning kit and isopropanol. It was the hardest repairing I ever done.
Buy tools: ali.pub/4spc54
Navajo Night by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: audionautix.com/ 
Наука
Best backing track of an instructional video I have ever heard!
SD card latch broken here. Snapped in two. Got a replacement one. This helped clear up how to get access and replace it. Thanks!
Thanks for uploading the video!
It was of such great help as I needed to replace the broken SD Card door. Without your video I would have certainly break a fitting, as some of the screws are really well hidden!
Thanks once again! 👍
Thanks for uploading. You often cover it with your hands the disassembly, maybee you sould change the camera angle.
Good video. Now i know what to open to clean some fungus I got behind the first sensor lens.
You can shoot the detailed video to remove the nikon d5100 shutter, I need it
My d5100 has some kind of red-ish stain in the viewfinder (likely caused by moisture), my guess is it's on the pentamirror. Do I have to open the whole camera to clean it?
I've tried checking everything I can access without major disassembly (mirror, the filter top of the mirror, and the surface behind it).
Do you know how to change the viewfinder lens? Do I have to take it apart?
It helped me how to change keypad, thanks
Well done
I have 1 spot dust in between filter and sensor . It’s really annoying when I took small aperture photos.
I want to learn this work, where and how to do it please tell me
Hi there, Thanks for the video. I was wondering what temperature is your soldering iron is set to, my one goes up to 400C although it won't melt the solder?
It depends on soldering iron power and quality (and price). 250-300°C is enough for most cases.
nice video
Tnks more ,and ,how to material and where canteri or citi pls
Hello. I had a Nikon D5100. When I try to take a picture, the auto focus lens mechanism turns left and right slowly (not normal) to focus an object. I just charge the camera battery pack fully. Could anyone tell me what wrong with that auto focus mechanism? Should I open this camera and apply some (a little) of grease into the mechanism auto focus? Thank you everyone.
Check and clean lens-camera contacts firstly. Then check camera with another lens.
Open heart surgery is less difficult
quite an adventure :))
Страшно смотреть на это количество винтов и расположения массы деталей.
Спасибо за видео, причём подробное и в хорошем качестве, да ещё и с предостережением!
На деле не так всё страшно 😉
@@KonstantinSachkov да, уже починил) Действительно не страшно. Единственное, не стал заморачиваться с винтиками и вкручивал их не в "родные" места. И после сборки осталось 5 лишних винтиков) Но главное - камера работает.
@@user-fp2po3wl6w 5 - это сильно. Ну там явно болтики с запасом накрутили 😁
Brother how much for repair dslr motor?
I don't know
HI My D5100, had crash, it has 3 feet fall on wooden floor, Since then Live view screen is dark and the pics are also dark, Lens is fine, View from view finder is good, Display is good, I think the CCD sensor is gone bad or some thing is loose inside with the fall. any suggestions ( I am ok with disassembling mobile phones so I can handle disassembly)
Switch on live view, take out the lens and see if the CCD is covered by a damaged shutter.
@@KonstantinSachkov As soon as I turn to remove lens, LV mode is turning off, same happens when I turn off the camera.
@@SatyaNagenderGuthula try using matrix cleaning in menu.
@@KonstantinSachkov this the video of my camera ruclips.net/video/9ABJ3A9rIHc/видео.html I have tried Clean sensor from the menu.
на что снимал данный ролик?
На телефон
Hello ji
These need to be edited. Long video for little use. And you never show how you actually fix anything.
Mobil number sir ji