Ground Fault in Addressable Fire Alarm System | Causes & Troubleshooting | Easy to identify | Hindi
HTML-код
- Опубликовано: 21 авг 2024
- Ground Fault in Addressable Fire Alarm System | Causes & Troubleshooting | Easy to identify | Hindi
In this video, you can understand what is ground fault, its causes & how to troubleshoot it.This video is important for project & service engineer who is working in fire & safety industry. This video is also useful for those person who are working in facility & operation industry.
If you are first time watch my channel so I request you to please first visit my channel videos & if you like my videos then only subscribe to my channel & also write comments if you want such valuable information.
__________________________________________________________________________
You can also join us on our facebook page, link available below.
/ ansari2991
__________________________________________________________________________
Must watch my previous video for more knowledge
---How to Find Leakage in FM200 Piping System | Nitrogen Pressure & Leak Testing | Practically Video
• How to Find Leakage in...
---Builder Integration In Addressable Fire Alarm System By Using Control & Monitor Module | Ansari29
• Builder Integration In...
---Monitor Module & How its Work | Fire Alarm Integration | Flow Switch, WLD, EDR, VESDA Integration
• Monitor Module & How i...
---Control / Relay Module in Addressable Fire Alarm System | Module Integration | CRF300,ULMCOM,MI-DCMO
• Control Module in Addr...
---Addressable Fire Alarm System | How its Work | Type of Addressing | Module Integration | In Hindi
• Addressable Fire Alarm...
---FM200 System Ravel RE-25AR Commissioning In Hindi | Imp Video For Commissioning Engineer | Ansari29
• FM200 System Ravel RE-...
---FM200 System | Ravel RE-25AR Gas Release Panel Installation & Wiring Connection In Hindi | Ansari29
• FM200 System | Ravel R...
---FM200 Gas Release Panel Commissioning | Ravel 120GR | Step By Step Explanation In Hindi | Ansari29
• FM200 Gas Release Pane...
---FM200 PPM | Maintenance | Daily Checkup | Step By Step Full Video In Hindi | Service Engineer PPM
• FM200 PPM | Maintenanc...
---FM200 Gas Suppression System | Installation & Working in Hindi • FM200 FM200 Gas Suppre...
---FM200 System Gas Release Panel Wiring & Connection | FM200 सिस्टम गैस रिलीज पैनल वायरिंग एंड कनेक्शन
• FM200 System Gas Relea...
---FM200 System Designing With Few Simple Steps | Important For Interview Question | English Subtitle
• FM200 System Designing...
---Addressable Water Leak Detection System | TraceTek WLD System | Full Explanation In Hindi | Ansari29
• Addressable Water Leak...
________________________________________________________________________
ground fault fire alarm system,
ground fault on fire alarm panel,
ground fault troubleshooting fire alarm panel,
fire alarm ground fault troubleshooting
finding ground fault in fire system
Earth fault in fire alarm system, cooper fire alarm panel, Notifier panel, Honeywell, simplex fire alarm panel, morley fire alarm panel,
addressable fire alarm system wiring,
addressable fire alarm system wiring,
addressable fire alarm system installation,
addressable fire alarm system installation in hindi,
addressable fire alarm system programming,
addressable fire alarm system in tamil,
addressable fire alarm system tutorial,
addressable fire alarm system vs conventional,
addressable fire alarm system manufacturers in india,
addressable fire alarm system advantages,
addressable fire alarm system boq,
bosch addressable fire alarm system,
addressable fire alarm system communication protocol,
addressable fire alarm system components,
addressable fire alarm system cabling,
addressable fire alarm system installation,
addressable fire alarm system installation in hindi,
addressable fire alarm system programming,
addressable fire alarm system in tamil,
addressable fire alarm system tutorial,
addressable fire alarm system vs conventional,
addressable fire alarm system manufacturers in india,
addressable fire alarm system advantages,
addressable fire alarm system boq,
bosch addressable fire alarm system,
addressable fire alarm system communication protocol,
addressable fire alarm system components,
addressable fire alarm system cabling,
conventional and addressable fire alarm system,
conventional vs addressable fire alarm system,
addressable fire alarm system diagram,
addressable fire alarm system design,
fire alarm addressable system wiring diagram,
addressable fire alarm panel,
addressable fire alarm system explained,
addressable fire alarm system honeywell,
how addressable fire alarm system works,
honeywell addressable fire alarm system wiring diagram,
addressable fire alarm system india,
addressable fire alarm system installation guide,
addressable fire alarm system loop,
addressable fire alarm system manufacturers,
#Groundfaultfirealarmsystem
#Earthfaultfinding
#Groundfaulttroubleshooting
Love you bahia ❤❤ zabardast
Excellent explanation
Thanks for your comem, pls share my videos in your company group.
Splendid and informative.
Thank you
Great explanation thanks bro❤️
Thanks
Great Ansari
Thanks, pls share my videos in your company group
Great explation bro... Very nice keep it up
Very important vidio you made sir .
Thank for your comments, pls share my videos in your company group
Ab itna acha to kisi ko koi nahi sam jayega yr
Thank you
Very knowledgeable 👌
Thanks for your comment 😊
Pls share my videos in your company group
Very important answer sir ground fault sab kar lange
Valueable information
Thanks
Thanks for your comment
Pls share my videos in your company group
Sir Apke bahut sare video helpful hai inse kafi madad Hui lekin ek problem hai kam krte vakt continuity nahi milti ek pura video continuity kaise check krte hai field PE Jake iska ek video banaiye
Thanks a lot . respected Sir 😊
You great sir
Thanks
Excellent
Thank you so much 😀
Hats off to you bro... Really awesome explanation... Thank u so much...
Thanks for your comment 😊
I request you to please share my videos in your company group..
Check all my videos it will helpful for you
@@Ansari29 contact number please
Please sir ham kisi device ko enable disable kaise kar sakte please videos
Thanq sir so to mach video sir
Most welcome
Very nice
Good information
Thanks for your comments 🙂
Pls share my videos in your company group
Assalamualaikum bhai bhut achy triqy sy explain krty hn..gent honeywell k panel k fault ki video bnain aik start faults ki
Ok I will try
Pls share my videos in your company group
Ok Sir can you give me whatsapp number
I'm working in soudi arabia Aljazirah campany as a electronic technician...
Pls mail your query to ansari2991@gmail.com
Very very nice 👍
Thanks a lot
Sir loop fault or line fault ke bhi video banaiye sir Hindi me
Ansari ji, superb explained.
Bms system pe bhi video banayiye
Thanks.
Ok I will try.pls share my videos in your company group
Mind blowing
Sir simencs fir painal ke batan ke bare me bataeye kon sa batan kiya kam karta hai
Check karta ho
Okey
Kya aap ul panal ke liye bata sakte hain..
Sir. C tec addressable fire panel men dublicat addresses ko kaisen solve karten hai aur device missing fault ko kaisen solve karten hai isme ek jaldi video banaye.
Double address identify karny k liye apko fire panel ko system sy connect karna hoga.. Usmai apko mapping k option m jaky check karna hoga ki kon sa detector double address liya hua hai fir aapko wo detector ko delete karky wapas sy add karna hoga...
Thanks sir
ground fault error may come some times malfunction of detector also, have faced in Morley panel, but finally found by removing detectors one by one and reset
Thanks Suresh for sharing your experience.
Pls share my videos in your company group
how to connect all residential flat kitchen heat detedtors & gas detectors to builder main fire alarm panel
Pls check my course video list. I have explained
Sir faire painal Simencs Ke bare me baty konsa batan kiya kam karta hai
Ok sure
Dada nice 👍🏻👍🏻👍🏻👍🏻
Sunny alarm advance ke bare mein thoda batao sar
how can slove tx fault (Emergency reply)
Main panel to Repeater panel cable issue
Advance per alarm ke bare mein
Sir,
Please Inform Panel Earth fault kese Clear Kare
Pls check my ground fault video
Notifier by honeywell panel pe video bnaye it's urgent
Good
Thanks for your comments, pls share my videos in your group
Card trouble pe batayiye boss
Short NAC 1 eske bare me batao sir
Hooter short circuit hogaya hai
thanks we done thi problem
Sir HVAC Technician k ley video banay plz
Fire control panel dc3500 ke bare me bata yega sar
fault check krty wakt ap ne detectors ko half kia lakin loop in disconnected tha kya panel phir b btaye ga k ground fault hai ya nahi?
Yesss usi sy pata chalyga agar nhi aaya iska matlab group fault dead circuit m hai....
Sir fire alarm cable in and out connect hotahe but earth cable cut kor diyega or donoko ak sat gorega
Bhai DC m 2 hi cable hota hai or panel sy bhi 2 hi cable aata hai
Nice sir
Very informative video
Thanks for your comment 😊
Pls share my videos in your company group 🙏
& pls check all my videos it will useful for you
Sir panel me sho kar ke bataiye plz
Nice information
Hi sir,
When we open the cable from D17 so it is required to connet the out put of D17 with loop in terminal of panel.
Open both the terminal
Jazakallah sir
Sir...aap oil and gas industies ki v vedio banaye...
Ok brother, I will try it
Thanks for your comment 😊
Sir Haney well molrey dx panel mein hi a raha hai Earth fault iska solution bata dijiye
👍
Thank you, please share my video in your company group
Sir gas pannel say signal kioun jata hai facp ko baghair koi fire k .pacp pannel py show hota hai gas pannel manually pull.please reply karna zaror
Aapka doubt samaj nhi aaya
Koi prblm bhi nhi hai phir bhi ground fauld aa rha hai
Third party system me grounding h to FAS me b fault ay ga
Notifier fire alarm system support other brand heat and smoke detectors???
Release Waal kya hai iske bare me bataye na sir
I need to notified fire pannal commissioning sir please learn me tips or make a video sir 🙏🙏
Hello bhai meri panel me 4 loop hai to eshme keshi hoga Earth fault keliyar
Ek ek kar k loop check karo..jismay hoga...wo cable nikalny par pata chal jayega
Hi,sir
Sir ager panel me loop open ka fault ae to kese use thik Kara Jae
Or hame pata bi nhi he problem kha he sir pliz rhenomai karen
Pls check my troubleshooting video
I have used FLP MCP & Hooters in plants. For this MI-DCMO & Monitor Module used to address device. So now connection tightness, glass & all wiring are ok still showing NO REPLY in Panel. What is the solution.? What are the causes.? Pl reply soon.
Pls check device address, selection switch (AB) also if device old then try to replace, check normal LED indication blinking, try auto learn
@@Ansari29 ok. But devices are installed just few months back.
Say! You sir
How can resolve the issue If the ground fault is present in the earth cable which is connected to the panel body( ground fault disappear when earth cable disconnected)
Check earthing connection. It may be a dummy earthing....
Sir can you make a video on network cable connection between panel
Hochiki panel ke bare me bataiye ki kaise installation hota hai
Ok I will try.
Pls share my videos in your company group
Brother please thoda slow bola kare ...
Yes, Sure🙂
Gas inhibit trouble
Salam karru bhi sab
Mera grond foult jaction box me skurow laga tha
Sir ground fault wire nikalnekebadbhi motherboard pai hai to kya kre
Pls check internal wiring of motherboard. Mai ny aysa trouble face kiya hai. Check all resister & connectors properly.
Honeywell xls 3000 me loop card se ground falt solve kia tha
Great,
Thanks for sharing your comment
Can u advise me "Double address" fault after successfully commissioning..
In which panel....??
DXC 2loop panel
Hello sir, Fire Alam addressble panel me logic kaise dale
Aapko kaisa logic dalna hai ...?
Sir,good evening...EST panal also coming grund foult..panal 02 card 04 also comming. I already trai this problem shole.if not going. Please tall me solution...
Hi….we replace our zeta addressable premier Al with new zeta smart6 addressable panel..panel connected with 4 loop contains 80-120 devices,after replacement we are facing earth fault. Without 4loop or connect single loop,fault is not showing: but if more than one loop fault is showing…..hlp me to find out the pblm
Check after which loop you connect to the system & it's showing fault, that will be the suspect loop & then identify the earth fault as per my technique.
Its showing different loop in different times…if number of loop is more than one that connected to the panel it will show earth fault…
1&2 it will show,3&4it will show,1&4it will show like that
Your Query solved in Video | Pls Check
ruclips.net/video/VKImg1jDvm0/видео.html
Good job brother, I have a fire alarm business in UK, can't see your email address in description
Thanks for your comment 😊
ansari2991@gmail.com
Dear sir agar graund faulty aata hai to is se system kya inpect padega means kya lows hoga
Yes, device faulty hojata h
Sir ac fult me proble slove kis karte hai
Panel ko AC supply nhi mil raha hoga....
How to give earthing to fire alarm panel
Earthing cable should be connected with panel body... Manufacturers already provide if not you can simply loop from earthing cable to panel body
Thank you brother
Please bro make a video of fitting of fire control simplex 4100es panel for me, how to remove loop from control panel, different devices and The module is connected In one word A to Z place vai
Sure dear I will
I waiting for your video
HELLO SIR MUJY 1 PROBLEM AA RHAA HAI ZETA PREMILER 4 LOOP PANEL HAI USKA SIRF LOOP-1 K SMOKE DECTORS ON HOTY HAIN DAILY PHIR KHUD OFF HO JATY HAIN BUT SOUNDER ACTIVE NI HOTY SIRF SD SARY ON HOTY HAIN LOOP-1 K BAKI LOOP NORMAL HOTY HAIN
PLZ GIVE ANY SOLUTION
Fire alarm all devices ka naam list baniye sir
Pls check my this video
ruclips.net/video/PqEcDnkN-zQ/видео.html
ruclips.net/video/_6_xiGmG4CE/видео.html
How to solve ground break fault
Check my video once
How to atten Loop driver bad coms fault
Very informative video you made there brother but, I kindly need your help as my FACP 4010 shows positive earth ground fault. I tried removing all looping cables and checked panel cables for any contack also but still the trouble is there kindly please advise.
If u removed all the cable which going to field than definitely ground fault is inside the panel ..now u have to check whether PCB touces the body, or check internal wiring if everything is ok then may be ur loop card gets faulty. & One more thing check by removing loop card it will help you to identify the source of fault...
@@Ansari29 thanks for the reply I'll try that also I just want to clear one doubt do the positive earth ground can also be in power supply terminal?
Sorry not getting ur query.........
@@Ansari29 I mean could the ground fault come in the 110v power supply cable given to the FACP
Agar panel mein fire to ground fault dikhata hai agar ham sari fire nikal dete Hain to ground iski kya vajah hai
How to check trouble short circuit simplex 4010 panel
Sir aap kaha se ho
Mera ground fault only display show karta hai panel se koie light indication nhi hai
Indicator faulty ho sakta hai
Hello sir facing one problem in Morley IAS panel is system fault (UNREGDC) what does it mean and how it can be removed.
Kindly share mail ID also as not being able to find it
Ansari Bhai fire alarm system Hai Keval check Karte Hain to powerAnsari Bhai fire alarm system Hai Keval check karte hain to power batata Hai To iska matlab kya hai
Detector ka voltage / Supply voltage
Sir data card 1 m ground fault aara h kaise rectify kre?
Sir How to calculate the battery capacity for Fire alarm panel
2 x 12V 7AH battery
Module me wrong connection se bhi group fault aata hai
Ek baar mere saath hua hai
Mai sab sajah dekh liya fir cc1 connection me dekha to ek connection wrong tha usko sahi karte hi Ground fault hat gaya
Great, Thank for sharing your experience. Appreciate you valuable time👍
Pakistan main koi essi jiggah jidhr sa iska mukml course krwata hon tu please batain
Loop1,loop2,repeater,alram kuch bhi nhi lga hua per phir bhi ground fault dhikha raha hai
Software mismatch fire alarm pnale ai ta naia akta video banan
Hello sir my panel foult R001 no reply from device
No Reply means : Device faulty hai app change kar k dekhiye
Fire ke drawing me in out kaise pata kare batau ta daju
IN ka matlab jo last detector sy Panel m cable aata hai or OUT matlab jo cable 1st detector ko jata h panel sy
Pls share my videos in your company group
Sir Negative Earth Ground Trouble Kidhar Fault Hoga
Panel ka negative terminal nikalo or dheki negative ground fault gaya kya... cable nikalny k baad fault aayega but aap negative ground fault dhekhiye gaya kya......agar gaya toh field m hoga nhi toh panel m... check kar k batao...
aur fault ac line
AC fault means Input supply fault
@@Ansari29 there is AC power properly and battery also good but still fault there
Addressable me kyakya problem aate hi
Mai ny Faults & troubleshooting ka video banaya hai..pls check it......
ruclips.net/video/EjYGoOFiYmw/видео.html
Sir est3x video banaiye
Ok I will try to make video on said topic.
Thanks for your comment 😊
Pls share my videos in your company group
All topics sir please