Yes I like this style of editing, I also like longer videos and shorter ones and you have a mixture which benefits everyone keep up the good work all the best 💪🏻👍🏻.
When you get there 1st thing put some foam round the cavity behind the lintel to fill those holes. Thats cold air straight onto the plasterboard and can get black mould.
Lovely work mate. If I'm up against it for time, I always chuck a scoop of cement in my mix for dabbing......sets solid in about 20 mins and won't budge 👍🏻
I’ve been plastering for 7 years now & I love that I’ve just found your channel, you’re the goat, love the content man🤝 I’d have waited for the boards to set before skimming but I gotta try this way now🤣
jesus, we need to clone you LOL, was a ceiling fixer and dry liner for 20 years, would always get screwed over by plasterers and their wavey walls.. the real Low was when I could fit a chippy pencil, behind the trim on the wall, I'd love to say it was an old house but it was in a new school lol. incredible mate, great channel, commentary and work
Very good trademan nice big lad would start u anytime ure keeping it a trade lot off dumplings out there i used 2 run a bit off sandpaper up my beads nice and shiney looks sharp 46 years in jim from glasgow keep up the good work
Another cracking video Kirk. Loving the new editing style. Been subscribed since you were sub 1k and still learning with every new vid. All the best 👍🏼
@@Onthetrowel the editing is bang on. Really good work. Also, sense of humour is spot on and the little tips that you add at home when you’re editing.. Really enjoy it. You crammed so much in in 14 mins. The best thing about it is you’re telling us about the problems we encounter as every house is different. Btw, I’m guessing your mate diggers surname is Barnes after cliff barnes in Dallas
Went straight over where the trickle vents have to to fit on the new bifolds window/door fitters going have fun putting the vents nice job but didn't alow for the vents ventilation will so vents won't be inclined when screwed onto the frame where the slot cut outs are in top of the frame 😉
When you're cutting plasterboard & the paper edges or corners get a bit ragged, do you just trim it back? Some US videos suggest sealing such with Zinsser Gardz or PVA, but that's for taping & jointing.
Kirk you mentioned waterproof sand and cement for 9 inch solid walls - Would you choose this over treated batten & foil back plasterboard? Would your approach change if it was solid stone walls?
Internal lintel was lover than external... Head has to go in level. I think they probably just cut the holes lover fitted the vents. If a window fitter couldn't figure that out I'd be very worried
Before half-time came along and every now and then when i haven't got any i just knock the skim up and leave it in the bucket board it then skim is normally stiff re knock then throw it on super quick.
Amazing Kirk you are just like me big belly lol 🤣 only joking and you always measure in inches why do plasterers always measure in inches . I get asked this alot when I'm on site by carpenters. And I just say that's the old new way now we are out of Brexit back to imperial lol 🤣🤣
Top plasterer kirk lad but little tip use mitre mate/glue activator for ya beads ready to skim on ya beads in 20seconds literally always good for wen ya boards/ dab still wet honestly game changer plus nawt worse wen ya clouting ya beads on nd wall crumbles I use it every time now 👍
@@Onthetrowel honestly pal just try it u will never look bk cut glue spay activator hold for 5 seconds like Bell metal and ready to skim no movement in beads wot so ever unlike clouts or staples unless u hoy 50 in each bead 😜
Love the videos mate, you truly reflect how plastering can be, in every aspect.... dont know how you do it mate, I run my own plastering firm, just me and a lad and still struggle to juggle that with family time etc, so to run a channel aswell.... hats off to you .tell Kieran to stick at it, in time he earn the big bucks and get himself a decent haircut 😂😂😂 all the best lads 👍
@ashleytaylor1024 I don't think there's such thing as balance. Whatever I focus on the other thing suffers, I just like a ping png ball. Family.... work... channel. Just got to try your best i suppose 🤷♂️👌
That's half time is a rip off , just buy a kilo of aluminium sulfate , ithats all half time is , my cousin is a chemist and I asked him what the code was on the back of rhe sachet . If you wanna slow the set down use sodium citrate . 😊
@@Onthetrowel I'm just nursing my second knee replacement kurt ......... Alls good plastering until the wheels start dropping off .......this ain't no fun at all pal ....all started aged about 45 ....57 now n what's next 😱
Look at the kitchen clock 4:15 into the video 😄 8:45 yet its saying 12.40pm on the kitchen clock. They need to change the time 😆 3.45pm it was finished going on the customers time zone 🤫🫢
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Let me know if you like the new style of editing or not?
Yes I like this style of editing, I also like longer videos and shorter ones and you have a mixture which benefits everyone keep up the good work all the best 💪🏻👍🏻.
Much better editing 💯
Good editing mate
Keep up the good work mabe do some fireplaces next, good old log burners
Great
All done with no dust sheets, I'm amazed. True pro at work.😊
So many details executed in this that only a professional with tons of experience and knowledge would know and be able to do. Lucky customer.
When you get there 1st thing put some foam round the cavity behind the lintel to fill those holes. Thats cold air straight onto the plasterboard and can get black mould.
the last time i tried to double down on half time it went horribly wrong fast. A true pro making it look easy. Awesome video kirk
Brilliant video. Absolutely class to watch a master at their trade.
Quality work. I'm not even a plasterer. But enjoy these videos.
Another superb job for another lucky customer!
Very professional Kirk... you're a natural
I'm learning mate
Lovely work mate. If I'm up against it for time, I always chuck a scoop of cement in my mix for dabbing......sets solid in about 20 mins and won't budge 👍🏻
Very impressive mate your the best in the game it’s clear no dust sheet no nothing g your trowel skills are exceptional keep smashing it pal
Thanks 👍
I’ve been plastering for 7 years now & I love that I’ve just found your channel, you’re the goat, love the content man🤝 I’d have waited for the boards to set before skimming but I gotta try this way now🤣
U done a cracking job of this in the emount of time you had aswell brilliant
Great video pal 👍
Nice job Kirk. When Hollywood come calling for your editing and directing skills remember us who started watching you on RUclips mate
Long way to go yet pal 🤣🤣
I know how I want the videos to look but I don't know how to do it 🙈🤣
Am not even a plasterer but a spark and love watching your vids, hope your channel does well kirk.. best of luck 👍
Cheers mate, I'm trying to make the videos better
@@Onthetrowel it's working!
very good work !
Nice bit of board work there Kirk love the videos bud 👍
Glad you liked it mate,I'm trying to make the edits better
jesus, we need to clone you LOL, was a ceiling fixer and dry liner for 20 years, would always get screwed over by plasterers and their wavey walls.. the real Low was when I could fit a chippy pencil, behind the trim on the wall, I'd love to say it was an old house but it was in a new school lol.
incredible mate, great channel, commentary and work
One of the tidiest plasterers around thought I was tidy which I am but I’m a little bit behind you great editing
Thanks for the nice comment mate
Great video mate! 👌
Cheers daz
Excellent job boys
Fu**in love your vids I've managed to plaster 3 walls dead flat and 6 window reveals without these vids I'd be stuck keep it up mate
I do the same me type of repairs here in Florida interior +exterior always have a can of foam adhesive great
Video lads👍
Thanks mate
Just in time for the pubs opening, man after me own heart!
Cracking video mate, i enjoy watching your work pro tradesman💪👍
i love the video i have always wanted a go at plastering watching your videos its a pleasure to watch keep it up 🔥🔥
Cheers Kirk some great tips.❤
Thankyou mate
Master at work👌
Good job mate.
I always love your videos. I think I would have used tape an a poly sheet over the dresser with the wine rack myself. Keep up the good work 👍
Great example Simple effective work nice job stress free. Always fun catching your vids. Regards
Thanks 👍
Very good trademan nice big lad would start u anytime ure keeping it a trade lot off dumplings out there i used 2 run a bit off sandpaper up my beads nice and shiney looks sharp 46 years in jim from glasgow keep up the good work
Spot on Kirk 👍
Great effort kirk weldone 👏
only the brave would add 2 sachets 😂
Nice work kirk, more plaster on you then the floor. Lol. Keep up
Good work You should title slapping on plaster.
Another cracking video Kirk. Loving the new editing style. Been subscribed since you were sub 1k and still learning with every new vid. All the best 👍🏼
Mate thankyou and thanks for the continued support.
Good tips for a diyer plasterer you have simplified complicated jobs.
Brilliant. Loved it.
Thanks mate, was the editing to much ?
@@Onthetrowel the editing is bang on. Really good work. Also, sense of humour is spot on and the little tips that you add at home when you’re editing.. Really enjoy it. You crammed so much in in 14 mins. The best thing about it is you’re telling us about the problems we encounter as every house is different. Btw, I’m guessing your mate diggers surname is Barnes after cliff barnes in Dallas
You probably know this allready kirk but if you chuck a few handfuls of multifinish in a mix your boards will set rapid...top editing!!
Nice job 👍🏼
Thanks! 👍
Finally someone has the same analogy as me. the swan effect about all calm and graceful on top but paddling like mad in the weeds lol
That was a masterclass cheers
Cheers mate, I'm trying to make the videos more interesting
Went straight over where the trickle vents have to to fit on the new bifolds window/door fitters going have fun putting the vents nice job but didn't alow for the vents ventilation will so vents won't be inclined when screwed onto the frame where the slot cut outs are in top of the frame 😉
Fortunately, the window fitters I work with are world class so they bail me out of these situations I get myself into
Hi Kirk, does the cavity have to be filled for you to put plasterboard straight on or can it be empty?
When you're cutting plasterboard & the paper edges or corners get a bit ragged, do you just trim it back? Some US videos suggest sealing such with Zinsser Gardz or PVA, but that's for taping & jointing.
The only way that head comes away is if they demolish the house great job as usual
What foam is that i use mega stik
No dust sheets over floor or furniture? Plus I’d of said, no I can’t hurry. I’ll come another weekend when your staying in 😏
Kirk you mentioned waterproof sand and cement for 9 inch solid walls - Would you choose this over treated batten & foil back plasterboard? Would your approach change if it was solid stone walls?
Do ya ever use off cut of plasterboard, machine edge for a square for reveals pal?
Unreal.. I love you Kirk
Cheers pal
You should use ct1 Kirk to stick board to steel never comes off
Do you try your boards dry before putting anything on them? Not judging just wonder
Like to see whether the window fitter was able to fit tickle vents
Internal lintel was lover than external... Head has to go in level.
I think they probably just cut the holes lover fitted the vents.
If a window fitter couldn't figure that out I'd be very worried
I use to use stiff plaster, on smaller/ medium jobs. But now I suffer on my elbow so be careful if you want a long working life in plastering.
Whats the average cost to go to bare brick and fully replaster a 3 bed house
HI kirk, when you dab onto brickwork do you need to prep the bricks first, ie scrubb off the loose dust / seal with SBR / watered down PVA?
I always do. You know you've got good adhesion to the brickwork. And your boards wont pop off as their only stuck to plaster dust.
Before half-time came along and every now and then when i haven't got any i just knock the skim up and leave it in the bucket board it then skim is normally stiff re knock then throw it on super quick.
Get another job over seas to post that was by far the best video
Amazing Kirk you are just like me big belly lol 🤣 only joking and you always measure in inches why do plasterers always measure in inches . I get asked this alot when I'm on site by carpenters. And I just say that's the old new way now we are out of Brexit back to imperial lol 🤣🤣
Great work pal, thought you might of chucked a dust sheet over the expensive wine
I hardly ever sheet up unless we're on carpet.
I genuinely hate dust sheets so I've just taught myself to not drop any and keep a damp cloth at hand
Remember old houses I built in Inches as well. But the best advise I can give you is 25mm is an inch. So 100mm is... Easy
I scrape a thin layer of dab over the underneath of the steel first. Let that dry, you can put dabs on it after no problem
Really thin, like rizla paper
Where's the cavity closers Kirk?
I don't know mate, I'm just a plasterer 🤷♂️
That was my first thought, window fitters should have fitted them.
There's an earlier video of plastering round something similar, again with no cavity closure. Must be a speciality of the window fitting firm!
Drywall adhesive bottom metre especially right at the bottom no good,any dampness will be straight through the adhesive and the board.
You do not know what you are talking about 🤦🏼♂️🤦🏼♂️
@@andysmith8901you obviously dont
Do you ever get Keiran on the trowel? Sorry if this has been in other vids that I’ve missed
Yes mate 100%
@@Onthetrowel I think we need a vid where you’re the skivvy and he’s the presenter for the day then 😂
It would be like pulling teeth 🤣🤣
Kirk Borne 😂 the Borne identity but born ready
Top plasterer kirk lad but little tip use mitre mate/glue activator for ya beads ready to skim on ya beads in 20seconds literally always good for wen ya boards/ dab still wet honestly game changer plus nawt worse wen ya clouting ya beads on nd wall crumbles I use it every time now 👍
I like that mate, what a great tip.
Thankyou
@@Onthetrowel honestly pal just try it u will never look bk cut glue spay activator hold for 5 seconds like Bell metal and ready to skim no movement in beads wot so ever unlike clouts or staples unless u hoy 50 in each bead 😜
I do this myself too! So much easier and neater!
Kirk the editing must of worked 10k views in a day 👍🏻
I was thinking the same thing
Is it true decorators dont like going over highly polished plaster???
You need big shoulders to work the hardening plaster.
Put 3 sachets in and youll be done by 9.30!
How much you charge for this m8
And then edit.. “and that’s the second coat going on now” 😂
It went abit quick an we didn't have much time to film as kyran had to clean the bucket at lightning speed 🤣🤣
This is hilarious, everytime he says its 9am or 10am you can see the clock in the kitchen settings its 2pm!!!! 😂😂😂😂
🤣🤣🤣 her husband works in China
Love the videos mate, you truly reflect how plastering can be, in every aspect.... dont know how you do it mate, I run my own plastering firm, just me and a lad and still struggle to juggle that with family time etc, so to run a channel aswell.... hats off to you .tell Kieran to stick at it, in time he earn the big bucks and get himself a decent haircut 😂😂😂 all the best lads 👍
@ashleytaylor1024 I don't think there's such thing as balance. Whatever I focus on the other thing suffers, I just like a ping png ball.
Family.... work... channel.
Just got to try your best i suppose 🤷♂️👌
When I don't want to charge but client insists I ask for a donation to my favourite charity. They usually donate more than I would have charged!
And they say you can't rush perfection 🤔 amazing always learning a lot along the way 👍🏻
Thanks 👍
You got a face on ya there mate,I hate deadlines.
Tell me about it 🤣
Don’t you use mucky water instead of wasting money on packets of half time .
2 sachets is brave 😂😂
That's half time is a rip off , just buy a kilo of aluminium sulfate , ithats all half time is , my cousin is a chemist and I asked him what the code was on the back of rhe sachet . If you wanna slow the set down use sodium citrate .
😊
have you heard of dust sheets 😷
Your watching a surgeon who doesn't drop anything son 👍😳
👌@@Onthetrowel
100% work in inches
Nice little job n knock that ££......just what you want forget that hell for leather all day long just wears your body out
I'm with you mate 100%
@@Onthetrowel I'm just nursing my second knee replacement kurt .........
Alls good plastering until the wheels start dropping off .......this ain't no fun at all pal ....all started aged about 45 ....57 now n what's next 😱
Sorry to hear that mate. Take care of yourself pal
Should be fire board too should it not?
Not 👍
Im too much of a dickhead to do jobs like that. Working up to kitchen units, furniture etc
I would throw a tantrum and jump back in the van
It's been done in the past but to be fair she was lovely and kept making us drinks and food 😀👌
@Onthetrowel haha good on ye mate 👏
looks like you could do with some poly roll and a few dust sheets
Can't be doing with tripping over them mate. I drop hardly anything so we just clean up as we go
Money in the bank
Now do it with hardwall, beads and skim in the same time ;)
Not to smooth Kirk painter will not be happy ,
Your adhesive is to wet and your board cutting is a bit rough , and the skimming could be better , besides that not to bad 4/10 for this job
Harsh
Kevin the cowboy is only jealous
beads cant be fixed or stapled,they have to be sunk in to mud!
Well I’ve been nailing them on for over 30yrs never had any problems. Obviously not on wet dabbing tho
Look at the kitchen clock 4:15 into the video 😄 8:45 yet its saying 12.40pm on the kitchen clock. They need to change the time 😆 3.45pm it was finished going on the customers time zone 🤫🫢
🤣🤣🤣 I was wondering how many people would notice that.
Her husband works in China, that's his local time 👌
Nice one 😂
I still love watching your videos so I'll let you off. keep up the good work fella👌
👏👍🍻🍻👌