"Audi" + "Rebuild" are probably the words i dont want to hear in the same sentence. Had an A6 C5 many years ago, transmission issues due to "sealed for life" oil... audi... never again
You forgot to read the "under extreme conditions" part in the manual book. It usually says there that you should replace your transmission fluid. They want you to not change the transmission fluid so you go back to them to replace the whole transmission or buy a new car.
To be fair most ZF transmissions are "lifetime" fill, meaning they don't "need" to be changed. My Jeep Cherokee is perfect example. I said heck with that, at 100k miles I replaced the filter and fluid. Not a cheap job.
Saudações do Brasil, vocês só trabalham com os veículos de elite, gosto bastante dos seus vídeos é muito legal e facinante trabalhar com essas máquinas é o sonho de muitos profissionais, um grande abraço do Brasil.
Increadable complexity to get the engine out. ! Compare to a beetle.... a few bolts, the complete unit comes down. It is not difficult to design a complex system. It is hard to design a simple system with all the desired functions. Now I switch to German : In den Beschraenkung zeigt sich den Meister. In the simplicity you recon the master.
There was no diagnosis...some damaged bearings...which would not seize the engine...a video about disassembly and assembly of the r8 engine with an annoying music...
Credo che questo sia il motore più complicato che abbia mai visto, complimenti ai meccanici. La distribuzione sembra una giungla fatta di catene e pulegge, che motore!
The question is did we fix the problem that caused the bearings to be scratched in the first place? I don't see anything mentioned about that in this video.
If I were in the man's place, maybe I would take the pieces apart in 2 months, but I wouldn't be able to put the pieces together until the end of the world 😊
It's just cheap oil service. And you are such a good mechanic. I caught my mechanic putting different oil other than the one i send to him with my car so be sure to stay there till finished
Nice vid guys. What exactly was the cause of failure, was it :1) oil starvation due to dirty/sub-functional oil pump supplying lower oil pressure or 2) wrong oil type/brand 3) previously worked on this engine by other mechanics not really knowing what they are doing ? Would like to know the real cause of failure.
600 hp mid-engined rwd with transaxle, oiling system, cooling, harnesses, suspension, frame bracing, heat shielding, crash protection, wrapped in aerodynamic body: yeah, the Germans are on my short list 😏
The owner said he was driving at high speed and rest. When he start the engine it won't start. On my opinion the owner didn't check the engine oil which life of engine itself. The level of the deep stick oil is insufficient needs additional motor oil that cause major engine failure. Another fact when driving at high speed for about an hour or normal speed when you pull up for stop to rest don't ever turn off the engine immediately. Let the engine idle for about 4 to 5 minutes so that engine will not wear and prevent damages especially on bearing, camshaft and piston including piston rings and block. The engine temperature is hotter will not moderate when you turn off the engine after high speed or normal speed for driving in more than a hour. Let it idle for 3 to 4 minutes and then turn off the engine whether gas or diesel engine.
In NYC,... We rented it for 1.7k/month and replaced it every two years . Any rebuild like that is not possible due to enormous labor cost and parts pricing policy from WAG groups in the USA 👍
Почему так думаешь? Это две рядные пятёрки на одном валу, ничего сверхестественного,так же как и v8 v6. Это старые добрые технологии и кстати очень надёжные если в правильных руках находится!☝️ И кстати некоторые как ты выразился "Васи" в гаражах,поумнее тех "Вась" которые в гламурных и красивых сервисах работают и делерских шарагах, причём в гаражах дяди Васи (не все конечно тут не спорю) могут сделать лучше и качественней ремонт,а всё потому что они делают и ремонтируют исходя из собственного жизненного опыта,а не по регламенту и времени как например у дилеров и метросексуальных красивых автосервисах.
How many kilometers has this engine been driven? Was it time for these problems to appear? Any misuse by the owner? A car of that price shouldn't break before 1,000,000 km.
больше на гаражные мастеров похожи, инструмент не профессиональный (дорогущие диски обычными головками крутят, отвертками ковыляют плафоны и т.д) и видно что работают неаккуратно
@@robertosequoia a eso me refiero. No se pone formajuntas entre las tapas que sostienen el arbol de levas, por eso ese motor va a tener un problema a medio plazo. Puedes poner algo de formajuntas si la tapa es solo una tapa y no pasa nada. Si dudas puedes consultarlo con una empresa rectificadora de motores(están cansados de ver gripajes en los arboles probocados por esto) cuando un mecánico ve una pequeña fuga de aceite por ahi suelen hechar pasta porque no hai junta como si la hay en la tapa superior y ese es el problema(hechan pasta negra gorda en vez de el sellante ultrafino que tiene que llevar)
@@davidgutierrezrey6393 pues a todos se le echa por el manual de fabricante y de fabrica bienen con silicona te digo por yo trabajo en toyota lo que pasa q tienes que saber ponerla y solo poco q salga asia fuera 👍👍👍
@@robertosequoia bueno... Cuando separes esa tapa fijate que dentro solo verás algun residuo de un sellador de color normalmente rojo en los bordes interiores. Puede parecer una tontería pero cuando levantes una tapa que montaron con pasta (solo un poco) verás que el residuo de la pasta no quedó solo dentro en los bordes sinó que también quedó una "fina" capa entre las tapas, esa capa "fina"es demasiado gorda(en la tapa de origen no hay nada que raspar y en la tapa con pasta si). Si consultas la tolerancia del arbol de levas con las tapa verás que la medida son unas pocas micras. Hay motores como el k4m que por esto incluso encienden el testigo de presión de aceite,otros el cliente solo nota un cambio del sonido en el motor en el momento de arranque que luego desaparece, otros no notan nada, pero lo que yo he podido aprender y ver es que en motores con bastantes kms si ves residuo de formajuntas entre esas tapas los árboles salen gripados y los asientos también se ven rallados, he enviado tapas a reparar a diferentes rectificadoras y las dos dicen lo mismo. Un saludo amigo, espero recuerdes lo que digo y puedas comprobarlo algún día
Бля .. страшно сейчас представить цену запчастей для этого мотора, причём заменителей туда не напихаешь из за риска совершить потом самоубийство после того как мотор покажет "кулак дружбы" из за этих самых качественных "заменителей" 😂
Але. Здрасьте. У меня R8, мне надо заменить масло. Пожалуйста приезжайте. А сколько по времени и стоимость? 3 дня и 800тысяч рублей. Да, хорошо, запишите на ближайшее время. Такие сны видел и пускал слюни на подушку владелец .....
Glad I saw this, I know now never to buy one. This must be the worst designed engine on the planet. Designers must have been stoned AND on crack when the built it.
this AUDI engine structure looks hell a complex,,, dazzling display,,,,, thousand of engine parts,,, IN 1997, united states CART racing, INDY car racing,,, the mercedes engine had 5000 parts,,,, yep,, no bull, no kidding,, no joke,,, REMEMBER,,that was in 1997,,, 25 years ago,,, INdy car engine had 5000 parts,, same complicated story as F1 car engine,,,,, this AUdi,,, looks more freaky than the ferrari 458 engine,,,, the merchanic guy who conducting this repair job------he must be smarter than a poet,,, why??? because he must remember 100s poems in his mind and recite them without look at the paper,, he recite all these poems clearly and precisely,,,, ,, you must understand,, try to memorize a poem is much harder than a simple paragraph...
@@SerGoDrozdoff значит вы своевременно меняйте масло и фильтры, но Лукойл я бы не заливал в свое авто, раньше так делал, но пожалел. Не знаю, что за Лукойл вы используете, но в последнее время очень много подделков появились
@@Viaches лучше злато залить чем Лукойл. Брат головки легковых авто ремонтирует, головки которые заливали Лукойл ужасные, как будто туда нефть заливали.
Impressive job, this guy knows what he is doing
I'm impressed with how these guys do their job but not with how Audi complicates things,
"Audi" + "Rebuild" are probably the words i dont want to hear in the same sentence. Had an A6 C5 many years ago, transmission issues due to "sealed for life" oil... audi... never again
You forgot to read the "under extreme conditions" part in the manual book. It usually says there that you should replace your transmission fluid. They want you to not change the transmission fluid so you go back to them to replace the whole transmission or buy a new car.
How about doing the timing belt 😅? Ohhh the CV Joints and boots, ohhh the leaking valve cover gaskets, Ohh the A6 so many memories.....
the power steering rack forgot!! 😅😅
To be fair most ZF transmissions are "lifetime" fill, meaning they don't "need" to be changed.
My Jeep Cherokee is perfect example. I said heck with that, at 100k miles I replaced the filter and fluid. Not a cheap job.
A front cover on a Jetta is enough for me 😅
I lived in China for 10 years…. amazed that anyone, anywhere was able to achieve "high speed" when on the roads!
It depends on which part of China.
They do have some very nice Highways.
@@weldmachine Indeed. Speaking more to the propensity of drivers to drive slow, have poor lane discipline and for traffic to build up.
hopefully you changed the AC compressor while youre at! Replacing it requires all this stripping out 😅😅
Saudações do Brasil, vocês só trabalham com os veículos de elite, gosto bastante dos seus vídeos é muito legal e facinante trabalhar com essas máquinas é o sonho de muitos profissionais, um grande abraço do Brasil.
Spun rod bearings was the cause the engine crankshaft was stuck. Crazy amount of work went into just getting to those!
The engine was seized because the main bearings failed, not the connecting rod bearings.
What great videos ! Very very talented mechanic 👍👍👍
Those are brave techs to take on that motor, well done 👍🏼
Very good. Might be good to loss the music and heard the workers/engine
Increadable complexity to get the engine out. ! Compare to a beetle.... a few bolts, the complete unit comes down.
It is not difficult to design a complex system. It is hard to design a simple system with all the desired functions.
Now I switch to German :
In den Beschraenkung zeigt sich den Meister. In the simplicity you recon the master.
I missed the diagnosis. I saw the bearings were damaged. Was the crankshaft ok? Just oil starvation? Quite a big job.
There was no diagnosis...some damaged bearings...which would not seize the engine...a video about disassembly and assembly of the r8 engine with an annoying music...
Credo che questo sia il motore più complicato che abbia mai visto, complimenti ai meccanici.
La distribuzione sembra una giungla fatta di catene e pulegge, che motore!
The question is did we fix the problem that caused the bearings to be scratched in the first place? I don't see anything mentioned about that in this video.
That oil was black as tar , preventive maintenance couldve avoided the issue
If I were in the man's place, maybe I would take the pieces apart in 2 months, but I wouldn't be able to put the pieces together until the end of the world 😊
👍👍💯💯
Замедленная? Вы не путаете?
It's just cheap oil service. And you are such a good mechanic.
I caught my mechanic putting different oil other than the one i send to him with my car so be sure to stay there till finished
Просто лучшая съемка на половину экрана...
👍👍😳that looks so complicated and master level mechanical knowledge needed....
Price?
感恩，謝謝分享！
Nice vid guys. What exactly was the cause of failure, was it :1) oil starvation due to dirty/sub-functional oil pump supplying lower oil pressure or 2) wrong oil type/brand 3) previously worked on this engine by other mechanics not really knowing what they are doing ? Would like to know the real cause of failure.
Please respond to him thanks.
They have no idea why. 😅
Spun rod bearings. There are heaps of analytical hits on precisely that online, for different models/types of motors. Have a good one 🖖🏼
Блин а его же потом еще собрать надо,😁👍😁
Лонглайф масло, да? И замена раз в 50к? 🤣 У нас это называется гаражный ремонт😆
Не пизди.
So did you just replace the bearings and crank and send it? Seems like the block might be toast if the bearing journals are scarred that much 🤷♂️
A German labyrinth!
How many hours take to disassembly re-assembly this engine?
Съемка как раз таки ускоренная😊
А что, разве не понятно?
Looks like the guy knew what he was doing....👊👍
Did they bother to flush out the oil passages to get all the bearing material out,otherwise the new oil will be contaminated..
What a brilliant video you guys are amazing
Correct me if im wrong.. the r8 uses the same engine based as the Lambo right
Nice work 👏
Experts at their best. Great work. Thank you for sharing.
Perfect job..they even washed the frame..
и музыка то какая)механик наверно танцует под нее в ожидании сколько ему заплатят))
That has to be one of the most labor-intensive engine removals I have ever seen. Damn Germans over engineer everything :)
It’s an Italian engine. Lamborghini.
@@FP-fb6jk its both because its developd by audi/lamborghini
600 hp mid-engined rwd with transaxle, oiling system, cooling, harnesses, suspension, frame bracing, heat shielding, crash protection, wrapped in aerodynamic body: yeah, the Germans are on my short list 😏
The owner said he was driving at high speed and rest. When he start the engine it won't start. On my opinion the owner didn't check the engine oil which life of engine itself. The level of the deep stick oil is insufficient needs additional motor oil that cause major engine failure. Another fact when driving at high speed for about an hour or normal speed when you pull up for stop to rest don't ever turn off the engine immediately. Let the engine idle for about 4 to 5 minutes so that engine will not wear and prevent damages especially on bearing, camshaft and piston including piston rings and block. The engine temperature is hotter will not moderate when you turn off the engine after high speed or normal speed for driving in more than a hour. Let it idle for 3 to 4 minutes and then turn off the engine whether gas or diesel engine.
Why does this happen? Lack of oil or something?
Bonjour j’ai un problème sur la polo de ma compagne j’aurais aimais savoir si vous pouviez me répondre merci
In NYC,... We rented it for 1.7k/month and replaced it every two years . Any rebuild like that is not possible due to enormous labor cost and parts pricing policy from WAG groups in the USA 👍
should be titled........ 1st oil change @ 120,000 mi.
I think most gearheads would rather listen to the engine than the music.
Parabéns pelo capricho.👍
I really appreciate this. But, do you check the gearbox?
Can you visit for the Same Job to Germany?
STRAIGHT GANSTA 👏👏👏👏👏👏👏👏
You are not still in lockdown??
I love your work i wishI could learn how to disassemble it
Respect!Great Job?👏
Такой двигатель явно не для гаража дяди Васи 😅😆
Почему так думаешь? Это две рядные пятёрки на одном валу, ничего сверхестественного,так же как и v8 v6. Это старые добрые технологии и кстати очень надёжные если в правильных руках находится!☝️
И кстати некоторые как ты выразился "Васи" в гаражах,поумнее тех "Вась" которые в гламурных и красивых сервисах работают и делерских шарагах, причём в гаражах дяди Васи (не все конечно тут не спорю) могут сделать лучше и качественней ремонт,а всё потому что они делают и ремонтируют исходя из собственного жизненного опыта,а не по регламенту и времени как например у дилеров и метросексуальных красивых автосервисах.
How many kilometers has this engine been driven? Was it time for these problems to appear? Any misuse by the owner? A car of that price shouldn't break before 1,000,000 km.
больше на гаражные мастеров похожи, инструмент не профессиональный (дорогущие диски обычными головками крутят, отвертками ковыляют плафоны и т.д) и видно что работают неаккуратно
Thank you
Good job sir
Great Job!!!
Well done. How much does it cost?
Rs 150 indian
@@neerajgujar6650 ?
Great work!)
Ridiculous amount of work to get down to the bearings , but great job guys
A decent effort rebuilding this Engine.
Ese motor va a gripar los árboles de levas. No se pone pasta de juntas en las tapas de árbol de levas. Es importante fijarse en los detalles
Incorecto esa no es la tapa esa pieza sostiene los arboles de leva y luego va latapa con junta de goma si lleva silicona como el 5.7 de toyota
@@robertosequoia a eso me refiero. No se pone formajuntas entre las tapas que sostienen el arbol de levas, por eso ese motor va a tener un problema a medio plazo. Puedes poner algo de formajuntas si la tapa es solo una tapa y no pasa nada. Si dudas puedes consultarlo con una empresa rectificadora de motores(están cansados de ver gripajes en los arboles probocados por esto) cuando un mecánico ve una pequeña fuga de aceite por ahi suelen hechar pasta porque no hai junta como si la hay en la tapa superior y ese es el problema(hechan pasta negra gorda en vez de el sellante ultrafino que tiene que llevar)
@@davidgutierrezrey6393 pues a todos se le echa por el manual de fabricante y de fabrica bienen con silicona te digo por yo trabajo en toyota lo que pasa q tienes que saber ponerla y solo poco q salga asia fuera 👍👍👍
@@robertosequoia bueno... Cuando separes esa tapa fijate que dentro solo verás algun residuo de un sellador de color normalmente rojo en los bordes interiores. Puede parecer una tontería pero cuando levantes una tapa que montaron con pasta (solo un poco) verás que el residuo de la pasta no quedó solo dentro en los bordes sinó que también quedó una "fina" capa entre las tapas, esa capa "fina"es demasiado gorda(en la tapa de origen no hay nada que raspar y en la tapa con pasta si). Si consultas la tolerancia del arbol de levas con las tapa verás que la medida son unas pocas micras. Hay motores como el k4m que por esto incluso encienden el testigo de presión de aceite,otros el cliente solo nota un cambio del sonido en el motor en el momento de arranque que luego desaparece, otros no notan nada, pero lo que yo he podido aprender y ver es que en motores con bastantes kms si ves residuo de formajuntas entre esas tapas los árboles salen gripados y los asientos también se ven rallados, he enviado tapas a reparar a diferentes rectificadoras y las dos dicen lo mismo. Un saludo amigo, espero recuerdes lo que digo y puedas comprobarlo algún día
😮🫡🫡🫡👌👌✌️🫡🫡🫡 chapeaux 🎩
Молодець.
Что за музыка в начале?))
Ауди топчик
عمل متقن
thats a lot of work! well done. but no thanks lol. damn audis.
Просто жесть какая-то 🤦🏻♂️
Gearbox from Lamborghini???
Ну вот а я не знал как R8ю то разобрать
На запуске этого мотора, нужно иметь титановые яйца 😂кто в теме тот поймёт 😉У таких,, зажигалок'' жизнь яркая, но короткая✊
Совершенно верно! Зато эмоций эта балалаечка тебе подарит на всю твою оставшуюся жизнь!😊
Ну это если всё по плану пойдет конечно 😆
Suspect the music was to drown out the conniptions and expletives on this job.
Будущее все таки за электро автомобилями
Good luck with that.
Обясни?
Audi engineers are some of the most sadistic people in the automotive world.
For the cost of bearing replacement you could of Bought two Toyota's that never break!!! Good Job though , for the Sucker that paid for it!!
just that. it's not that bad to rebuild the engine. R8 not start because of something else. even rod knock, the car still running.
Бля .. страшно сейчас представить цену запчастей для этого мотора, причём заменителей туда не напихаешь из за риска совершить потом самоубийство после того как мотор покажет "кулак дружбы" из за этих самых качественных "заменителей" 😂
If a V10 is very quiet, than you know there is something massively wrong with it…
Гарантия пять минут на выезд из бокса
Power
Totally how many hrs of work spend 😂
The most posed question...
Ауди хорошая марка, но ска то что она даёт надо платить, не ну а чо вы хотели? Это вам не Тойота.
マジで参考になります
Как у танка т-34 !
Але. Здрасьте. У меня R8, мне надо заменить масло.
Пожалуйста приезжайте.
А сколько по времени и стоимость?
3 дня и 800тысяч рублей.
Да, хорошо, запишите на ближайшее время.
Такие сны видел и пускал слюни на подушку владелец .....
no ale co zrobili z tymi panewkami wkoncu??
Poor R8, rode hard for sure…
We wouldn’t know what the engine sounded like over the blaring music…
why don't you say that this is a Lamborghini engine??
It mostly looks like you remove car from engine
Насколько знаю это мертворожденный движок. На него нет ничего.
Полнейший бред просто🤦🏻♂️
Oil looks really bad, I don’t think robots will be doing this job anytime soon.
Glad I saw this, I know now never to buy one. This must be the worst designed engine on the planet. Designers must have been stoned AND on crack when the built it.
My God, holy trinity, jesus mary Joseph, it’s a show of horror, nightmare! 🦇
Cuántos tornillos sobraron?jajajaja
this AUDI engine structure looks hell a complex,,, dazzling display,,,,, thousand of engine parts,,,
IN 1997, united states CART racing, INDY car racing,,, the mercedes engine had 5000 parts,,,, yep,, no bull, no kidding,, no joke,,, REMEMBER,,that was in 1997,,, 25 years ago,,, INdy car engine had 5000 parts,, same complicated story as F1 car engine,,,,,
this AUdi,,, looks more freaky than the ferrari 458 engine,,,, the merchanic guy who conducting this repair job------he must be smarter than a poet,,, why??? because he must remember 100s poems in his mind and recite them without look at the paper,, he recite all these poems clearly and precisely,,,, ,, you must understand,, try to memorize a poem is much harder than a simple paragraph...
This is going to be a pricy rebuild.
50 тыс. до первого ремонта. Отстой а не тачка. Тем более картоху некуда грузить.
💯👌
По ходу владелец вообще не следил за своей авто, и заливал Лукойл😂
я на турбоВАГах с пробегами авто 400 тысяч и 180 тысяч на лукойле больше 10 лет и около 300 тысяч км мои. Что я делаю не так?
@@SerGoDrozdoff значит вы своевременно меняйте масло и фильтры, но Лукойл я бы не заливал в свое авто, раньше так делал, но пожалел. Не знаю, что за Лукойл вы используете, но в последнее время очень много подделков появились
@@Khamzat_Shali нужно на фирменных заправках брать а не в бочках но я даже в газель Лукойл не лью
@@Viaches лучше злато залить чем Лукойл. Брат головки легковых авто ремонтирует, головки которые заливали Лукойл ужасные, как будто туда нефть заливали.
@@Khamzat_Shali если менять масло раз 15000 км, то какая разница, что за масла? Лукойл не надо абливат грязью. Нормальная масла.