@@ianduonghawaii it’s definitely a good spot weight wise on the mob8. I can’t wait till it’s not freezing with snow so I can rip these outside. Thanks for watching!
Dang I just bought my goggles X in December, DJI looking really good for micros right now, hopefully walksnail can come out with something like it or else I might switch
Lots of people love the goggles x but I am not one of them 😂 I hope you have better luck than me. I do think the Walksnail 1S vtxs are more durable and the FOV of the camera is nicer for flying. But the connection quality and recording quality is no match.
@@nazarstetsenko1794 I do not own any 850mAh 2S batteries so I have no clue. They also wouldn’t fit in the mobula 8 battery tray as the 550’s are already very snug.
Thank you! I was going to show DVR but realized I had the record OSD turned off so it didn't have any of the stats. That being said there were literally no drops in reception throughout the whole warehouse/office. The connection on the new system is unbelievable. When I get the 1S whoop built up I will remember to do a lap around the place with OSD though.
Hey man, great flying! Loving these videos. Question, what angle is your camera set at? Do you keep it basically 0 degrees to control your speed indoors? Thanks!
can you try to ship it back to DJI and see what happens? do they fix it, do they give you discount to buy new one, do they ignore you? and keep us updated!
It's going to cost me more to ship it back to DJI then it would to just buy a new one unfortunately. I do know a buddy who is sending it back and they did say they will fix it. That being said there will probably be a cost associated with the repair so for the O4 lite I don't think it's cost effective to send it back due to the already pretty low price.
Very cool! I am building a 04 Mob8 also and wondered if you settled on a canopy yet? Also, what do you think flew better, the hurricane or bi-blade props?
Thank you! I honestly don't think I am even going to rebuild the Mob8 as O4 anytime soon so I have not even thought about a new canopy. I started to design a new one but then the O4 died so I stopped. The bi-blades flew better only because they were brand new. I would choose the tri-blades any day though.
Loving those comparisons and that rip at the beginning was fire 🔥. Gotra say man, pretty jelly of your flying fun house there. Cant remember if i asked you beforw or not, but I'm assuming that's your workplace?
@@fullhamfpv thanks man 🙏🙏 Yeah it’s my workplace. Pretty much can fly it whenever I want outside of when people are working 😂 Definitely lucky to have it for winters
I seen a video that Albert Kim put out on how he was trying using a 1s with the DJI 04 Lite once he come close to hit LVC he lost video he wasn't even flying it hard at all he was just doing some very lite cruising. But anywho Thomas great job on another video with this DJI 04 Lite unit👍😁👍
@@3DMOFO2020 you should see his newer videos of the new meteor65 pro with O4. BetaFPV’s new board stops that from happening and makes 1S a lot more possible. I have two of those boards on the way as I ordered em before I killed this O4 😂 Anyways thank you as always 🙏
I do that a little more with my analog whoops as some spots are death zones for these things 😂 But yes I do need to do that more often, even just to change up how I usually fly. Thanks for the feedback 🙏
Hello man. You have a perfect place to fly Mob8. Found out about you while searching for o4 lite and whoops. What is the flight time with your current build? What is your battery size ? I want to build a whoop to fly indoors but cannot decide which way to go. 1s whoop or 2s
Hello and thank you for watching. I did mention the answer to both of your questions in the video but I can easily get over 5 mins if I am just cruising but probably between 3-4 when freestyling. Battery was a 2S 550mAh from GNB. I prefer flying 1S indoors personally, even when in the warehouse I prefer 1S.
@@_tcmore my bad. I ve started the flight scene directly while the video is muted :( apologies and thank you for sharing the data. I wonder if it has enough power to fly with 1s. as o4 lite is power hungry and the whoop will be heavier than analog ones
@ no problem! 1S is definitely possible but you are right it won’t fly anywhere near as good as its analog counterpart. I am waiting on some parts that should be here this week or next week to build a 1S whoop with the O4 lite so keep a lookout for that as I will for sure be doing a video on it.
@@gloriousquads appreciate it man!! Next vid won’t have any flying I don’t think though as it’s just going to be comparing the Radiomaster pocket and jumper T20 😂 Fair warning if you come for the freestyle only!
thanks bro! I am going to be basically building the Meteor75 Pro O4 that they are selling as a BNF so it'll have the BetaFPV 1102 22,000kv motors. If I can get another O4 or two I might also try and build a lighter version on the air frame. That being said I think these vix's are too fragile for my kind of flying 😂
Nice video! And sick freestyle flow. But I would make one recommendation, you should always put your comments and the nuances of your jargon at the very end of the video. Most people clicked on this to see some freestyle flight and could care less about all the little details. If the video started with music and freestyle then ended with your comments that would come off way clean and professional. Keep it up !
@@JacobRhine-q4s thanks man and appreciate the comments. I have actually found the opposite to be the case. My freestyle videos get way less interaction than my videos that have talking in it. I’ve done it both ways before as well and generally viewer retention has been more in this format. This video was also less about the freestyle and more the comparison of the different video settings.
Thanks man!! 100% if I am intending on freestyling I will be flying it 1080p @ 100fps. I really do wish I could record 4K and still fly 100fps but for social media posting the 1080p looks good enough for sure.
@@emmanuelgoldstein3682 was only using the biblades because I ran out of the triblades. They don’t feel overly different but biblades drift more so I prefer the triblades
Looks Really Good, 🔥 Packs, makin me wish had somewhere indoor to fly 🥲 I also find 1080p hard to notice with this camera, like 4k and 1080p both look real nice, little bit of sharpening and color correction and I think it would be hard to notice a difference, less your on bigger screen. know this is to show off the RAW footage though.
Thanks man! And yeah it is hard to see much of a difference between the two. On a small screen they are basically identical. Pretty crazy how good the quality is regardless of which mode you use. I will mostly be flying exclusively in the 1080 100fps as it feels way better latency wise.
when you went 1080 60 fps did you blotch out the top corners or did it just come out like that?? i can't tell the diff between 1080 and 4k really, i think my tv is 1080p
No that is just the camera being a little more pushed back in the mount so a little bit of the canopy was in view. Honestly there isn't a huge difference between the two resolutions but your TV being 1080p could also be part of that.
@ I designed the canopy but it’s too close to the vtx so I deleted the file. I recommend buying BetaFPV’s new O4 canopy or printing something else that you find.
This isn't a stock Mob8 and I doubt you are using a NeutronRC AIO in your build. It uses a different chip than most FC's so I wouldn't recommend using my settings. But all I did was use the UAVTech Preset for a 2" quad I believe. I believe I am on Betaflight 4.5 though.
Mob8 is my favorite quad so far with o4 lite! I get over 4min freestyling outdoor with ovonic 550 2s.
@@ianduonghawaii it’s definitely a good spot weight wise on the mob8.
I can’t wait till it’s not freezing with snow so I can rip these outside.
Thanks for watching!
Mobula 8 is also my favorite copter. But I have the Walksnail version 😊
Love these videos keep em coming !!
Thank you! More on the way for sure !!
SICK!!!
Thank you!
Impressive. Thanks for the vid.
Thank you for watching 🙏
Mobula 8 is also my favorite copter. But I have the Walksnail version
I still prefer 1S whoops but that's on the analog side of things.
This Mobula 8 used to have walksnail in it.
It's definitely a fun quad.
Dang I just bought my goggles X in December, DJI looking really good for micros right now, hopefully walksnail can come out with something like it or else I might switch
Lots of people love the goggles x but I am not one of them 😂
I hope you have better luck than me.
I do think the Walksnail 1S vtxs are more durable and the FOV of the camera is nicer for flying. But the connection quality and recording quality is no match.
Качество сочное 🙌👍
Thank you 🙏
Congratulations! And if you fly on a GNB 2s 850mAh, what would be the optimal flight time?
@@nazarstetsenko1794 I do not own any 850mAh 2S batteries so I have no clue. They also wouldn’t fit in the mobula 8 battery tray as the 550’s are already very snug.
Great freestyle man. I'd love to see the DVR footage to see how the reception is like flying through that big warehouse.
Thank you!
I was going to show DVR but realized I had the record OSD turned off so it didn't have any of the stats.
That being said there were literally no drops in reception throughout the whole warehouse/office.
The connection on the new system is unbelievable.
When I get the 1S whoop built up I will remember to do a lap around the place with OSD though.
@_tcmore wow, that's super impressive. DJI knocked it out of the park with the o4.
@ it really is very impressive what they did
Hey man, great flying! Loving these videos. Question, what angle is your camera set at? Do you keep it basically 0 degrees to control your speed indoors? Thanks!
Thank you! 🙏
The camera angle in this video was 15 for the freestyle edit and 25 for the other parts.
Much prefer the 15 on a 2S setup
can you try to ship it back to DJI and see what happens? do they fix it, do they give you discount to buy new one, do they ignore you? and keep us updated!
It's going to cost me more to ship it back to DJI then it would to just buy a new one unfortunately.
I do know a buddy who is sending it back and they did say they will fix it. That being said there will probably be a cost associated with the repair so for the O4 lite I don't think it's cost effective to send it back due to the already pretty low price.
Very cool! I am building a 04 Mob8 also and wondered if you settled on a canopy yet? Also, what do you think flew better, the hurricane or bi-blade props?
Thank you!
I honestly don't think I am even going to rebuild the Mob8 as O4 anytime soon so I have not even thought about a new canopy. I started to design a new one but then the O4 died so I stopped.
The bi-blades flew better only because they were brand new. I would choose the tri-blades any day though.
@@_tcmore Cool thanks for the quick reply!
@ no worries
Loving those comparisons and that rip at the beginning was fire 🔥. Gotra say man, pretty jelly of your flying fun house there. Cant remember if i asked you beforw or not, but I'm assuming that's your workplace?
@@fullhamfpv thanks man 🙏🙏
Yeah it’s my workplace. Pretty much can fly it whenever I want outside of when people are working 😂
Definitely lucky to have it for winters
@_tcmore Absolutely, fantastic perk!
I feel like 4:3 is a necessity on the o4 because of the smaller FOV. I converted my mob8 from walksnail and 16:9 is just way too narrow vertically
My build used to be walksnail as well 😂
But I totally agree 4:3 is definitely the way to go. You can always crop in post.
Any luck on a new, safer canopy that protects the VTX better?
Not yet but I am waiting for BetaFPV's canopy to arrive that they have for the O4 Meteor 75 Pro.
I seen a video that Albert Kim put out on how he was trying using a 1s with the DJI 04 Lite once he come close to hit LVC he lost video he wasn't even flying it hard at all he was just doing some very lite cruising. But anywho Thomas great job on another video with this DJI 04 Lite unit👍😁👍
@@3DMOFO2020 you should see his newer videos of the new meteor65 pro with O4.
BetaFPV’s new board stops that from happening and makes 1S a lot more possible.
I have two of those boards on the way as I ordered em before I killed this O4 😂
Anyways thank you as always 🙏
@_tcmore oh!! I didn't catch that video but I will now thanks for the heads up Thomas😁
Fly through the pipes and stuff, fly low and under things too, its visually appealing
I do that a little more with my analog whoops as some spots are death zones for these things 😂
But yes I do need to do that more often, even just to change up how I usually fly.
Thanks for the feedback 🙏
@ death zones is a terrible excuse… you can see way more with digital and better range…
@ 😂😂
Well considering this O4 is literally dead I will say that is false
Dope video Tom! Whats easier to break, the Mob 8 frame or the o4 lite?
😂😂😂
Thanks man! Went through two Mob8 frames and only one O4 so Mob8 frame is definitely still easier to break.
bravo!, wondering about your rates ?
Thank you!
I use actual rates
70 850 .32 on all axis
Hello man. You have a perfect place to fly Mob8. Found out about you while searching for o4 lite and whoops. What is the flight time with your current build? What is your battery size ? I want to build a whoop to fly indoors but cannot decide which way to go. 1s whoop or 2s
Hello and thank you for watching.
I did mention the answer to both of your questions in the video but I can easily get over 5 mins if I am just cruising but probably between 3-4 when freestyling.
Battery was a 2S 550mAh from GNB.
I prefer flying 1S indoors personally, even when in the warehouse I prefer 1S.
@@_tcmore my bad. I ve started the flight scene directly while the video is muted :( apologies and thank you for sharing the data. I wonder if it has enough power to fly with 1s. as o4 lite is power hungry and the whoop will be heavier than analog ones
@ no problem!
1S is definitely possible but you are right it won’t fly anywhere near as good as its analog counterpart.
I am waiting on some parts that should be here this week or next week to build a 1S whoop with the O4 lite so keep a lookout for that as I will for sure be doing a video on it.
@_tcmore I'm already subbed. Keep em coming 😉
@@gloriousquads appreciate it man!!
Next vid won’t have any flying I don’t think though as it’s just going to be comparing the Radiomaster pocket and jumper T20 😂
Fair warning if you come for the freestyle only!
nice vid man. what motors are you putting on the 75 pro then?
thanks bro! I am going to be basically building the Meteor75 Pro O4 that they are selling as a BNF so it'll have the BetaFPV 1102 22,000kv motors.
If I can get another O4 or two I might also try and build a lighter version on the air frame.
That being said I think these vix's are too fragile for my kind of flying 😂
Nice video! And sick freestyle flow.
But I would make one recommendation, you should always put your comments and the nuances of your jargon at the very end of the video. Most people clicked on this to see some freestyle flight and could care less about all the little details.
If the video started with music and freestyle then ended with your comments that would come off way clean and professional.
Keep it up !
@@JacobRhine-q4s thanks man and appreciate the comments.
I have actually found the opposite to be the case. My freestyle videos get way less interaction than my videos that have talking in it.
I’ve done it both ways before as well and generally viewer retention has been more in this format.
This video was also less about the freestyle and more the comparison of the different video settings.
What mode do you like best so far for flying/in the goggles? Nice video mate 👍
Thanks man!!
100% if I am intending on freestyling I will be flying it 1080p @ 100fps.
I really do wish I could record 4K and still fly 100fps but for social media posting the 1080p looks good enough for sure.
I notice you use bi-blade props on the mob8. How does it fly compared to the tri-blade, especially with all the weight of the o4 lite?
@@emmanuelgoldstein3682 was only using the biblades because I ran out of the triblades. They don’t feel overly different but biblades drift more so I prefer the triblades
Looks Really Good, 🔥 Packs, makin me wish had somewhere indoor to fly 🥲 I also find 1080p hard to notice with this camera, like 4k and 1080p both look real nice, little bit of sharpening and color correction and I think it would be hard to notice a difference, less your on bigger screen. know this is to show off the RAW footage though.
Thanks man!
And yeah it is hard to see much of a difference between the two. On a small screen they are basically identical. Pretty crazy how good the quality is regardless of which mode you use. I will mostly be flying exclusively in the 1080 100fps as it feels way better latency wise.
@@_tcmore yeah makes sense to be flying in that mode mostly, so very nice that its like that !
What’s the flight time? Can’t wait for someone to make a nice small 2s or 3s o4 lite quad with more than 7min flight time.
@@eme4289 with a nice cruising fly I think this could get pretty close to 7 minutes. I got over 5 pretty easily.
Have you had any luck with rocksteady or gyroflow? I’ve got my O4 Lite builds flying great but Rocksteady and Gyroflow is unusable.
@@GrusFPV I have not. The camera needs to be extremely soft mounted for it to work.
Hoping the BetaFPV O4 canopy can solve that.
when you went 1080 60 fps did you blotch out the top corners or did it just come out like that?? i can't tell the diff between 1080 and 4k really, i think my tv is 1080p
No that is just the camera being a little more pushed back in the mount so a little bit of the canopy was in view.
Honestly there isn't a huge difference between the two resolutions but your TV being 1080p could also be part of that.
What VTX output? Nice flying!
It's on the auto setting power wise with DJI but I think the max output power of this vtx is 700mw.
It's a crazy solid connection though.
@_tcmore this canopy, is it stock in 25 or did you have to get it somewhere else?
@ I designed the canopy but it’s too close to the vtx so I deleted the file.
I recommend buying BetaFPV’s new O4 canopy or printing something else that you find.
Anything special with the tune?
@@Halphbaked210 just used the uavtech 2” preset
ruclips.net/video/xM2YpG4Bavw/видео.html hello man I think this might be your issue with the not working o4 air unit
@@gloriousquads hello!
No I think mine was damage to the actual vtx board.
Could you share your pids or even whole cli dump? I am getting terrible propwash on same setup. And what version of betaflight are you running?
This isn't a stock Mob8 and I doubt you are using a NeutronRC AIO in your build. It uses a different chip than most FC's so I wouldn't recommend using my settings. But all I did was use the UAVTech Preset for a 2" quad I believe.
I believe I am on Betaflight 4.5 though.