17 DIY ELECTRONIC inventions YOU can create for home
HTML-код
- Опубликовано: 30 ноя 2024
- Timestamps:
0:08 Tea cooler
1:16 DIY lamp
2:25 Portable charge
3:30 DIY conditioner
4:06 Water purity meter
5:05 Building lighter
5:32 Toilet lighter
This video is made for entertainment purposes. We do not make any warranties about the completeness, safety and reliability. Any action you take upon the information on this video is strictly at your own risk, and we will not be liable for any damages or losses. It is the viewer's responsibility to use judgment, care and precautions if one plans to replicate.
The following video might feature activity performed by our actors within controlled environment- please use judgment, care, and precaution if you plan to replicate.
All product and company names shown in the video are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
----------------------------------------------------------------------------------------
Our Social Media:
Facebook: / 5minute.crafts.men
Instagram: / 5.min.crafts
Twitter: / 5m_crafts
5-Minute Crafts PLAY: goo.gl/PEuLVt
The Bright Side of RUclips: goo.gl/rQTJZz
----------------------------------------------------------------------------------------
For more videos and articles visit: www.brightside.me/
Music by Epidemic Sound: www.epidemicso...
![Digital Circus Episode 4 [TRAILER]](http://i.ytimg.com/vi/abZtsmMUbJo/mqdefault.jpg)
The water dirtiness meter is not a direct measure of dirty-ness, it is just a measure of salinity, if you had clean water and you put a ton of salt in it, then it would measure very high, but if you had water without a high salt content, but with a lot of germs and bacteria in it, it could not measure it, you would need an industry grade ATP meter, so please DONT rely on this to tell you if water is good or not as this might pickup metals and salts in water but not harmful bacteria.
ikfr
The copper tape and snail one was genuinely pure genius.
just electrocute them right
ruclips.net/video/4-6Ff4GBHow/видео.html
It was stolen from diy perks
for the servo motor thing, you will easily wear out the servo motors gears and/or motor as it was not designed to be used as an electrical generator
Do you know the materials used in there? Can you state them for me, I'm working on a science project similar to this. It'll be much appreciated.
@@inggogauran7921 Just look at the product description/instructions
It also damage your phone battery by charging inconsistent
Will that experiment will work
while the remote-operated door opener might work, I would advise you to use a method of securing the bolt in place on the opposite end of the motor, and probably get rid of the bolt altogether because it will wear down quite easily, use a worm gear connected to a small gear on the lock instead, they are designed for such applications
I want to speak with you? Can you send your email or numbers? Or Instagram
*DO NOT ATTEMPT THE DIY SOLDERING IRON:*
One of two bad things could happen:
1. the graphite on the pencil could become hot enough to light the wood part of the pencil on fire
2. the 9v battery could overheat and blow up due to you essentially shorting the battery
and also I don't think a single 9v battery could have enough sustained amperage to heat up a piece of graphite
1:50 looks like 5 minutes have been watching me🧐
Bro I am your subscribeer 🙏🙏
Yeah
Yesss😅😄
@@InventR_ 😁😃
I subscribed to both
Any tamilan 🤚🤚🤚
nhi
I am
Yeah
Vanakkam
Yeah
Which sensor did you use for rapid cooling system?
6:58 if the door is locked and battery power is low 🤣
Lol
ruclips.net/video/4-6Ff4GBHow/видео.html
Get this guy some proper soldering skills
Honey, Hide the hot glue gun!
ruclips.net/video/4-6Ff4GBHow/видео.html
Lmao
*All ideas are awesome* 👍👍👍👍
Guys welcome to my Inventive channel
praise our LORD 🩸 thank you for being our savior jesus Christ ❤
2:25 is genius !!!! cant tell u how many times ive been out riding my bike and needed power for my phone....
Not genius, this method will barely charge your phone at all and in order to get any realistic charge you would need to bike for literal hours at a high speed nonstop. It's simply cheaper and cleaner for the environment to buy powerbank or otherwise a rechargeable charger on the go/backup battery,etc.
As this device is going to lead to e-waste.
and for the fan, PLEASE MAKE SURE IT IS UNPLUGGED IDK WHY THEY DIDNT PUT THAT IN THERE but some people might not remember to unplug it and shock themselves on the fan motor due to it being a motor that is connected to the power that comes out of your wall
You'd have to be pretty dumb and deserving of a good belt if you left it unplugged. Them people need a lesson.
?
Please Give us Link of Power Bank Chip
Motion sensor led on toilet was pretty cool 😂
Some of these projects can be [somewhat] dangerous and other will not produce the expected result unless you want to invest more time in testing and design.
At the end of the day I praise these people coming up with interesting ideas and sharing it to the world.
I used to watch these when I was 7 now I'm 10
im in shock that the remote controller car broke like that
Is the sensor on the first project an IR Temperature sensor? Trying to understand its purpose. If it is or even if it isn't can you link the product?
ruclips.net/video/4-6Ff4GBHow/видео.html
ruclips.net/video/4-6Ff4GBHow/видео.html
naturally everyone has a soldering iron.
You do know the Hamster is going to form a Union and demand more Peanut Butter. I've seen it happen. ;-)
which type of motor used in charging when cycling.....
I thought that I might be able to learn something new in electronics but was I ever wrong about this self aggrandizing video. 😞
Holy shit... laser level ????? HA!!! That is epic to use for all sorts of stuff..... as a painting muralist... i cant tell u how many times ive required a device like that....
What is the module to make a tea cooler ?
Have you found an answer yet?
@@abdulrahmandisu5802 ruclips.net/video/4-6Ff4GBHow/видео.htmlruclips.net/video/4-6Ff4GBHow/видео.html
I watch all these 10 times please make new ones.
Before connecting the wire to the power bank, the phone started charging. Really cool😀
ruclips.net/video/4-6Ff4GBHow/видео.html
Water sensor: yeah this water is good
The river water: *full of bacterias*
It's all fun and games until your kid pisses on the circuit attached on the toilet that turns on the led when you get inside the bathroom.
😂😂😂
Tea fan should blow away from the mug. Thermodynamics 101
What kind is micro board used in water purity meter
Never Open your electronics without being sure about your skills!!
I’d rather watch my trust worthy indian from across the world
Don't mind but i think you can improve your soldring skills
Probably the worse soldering technique I have ever seen
@@kennmossman8701 Well what's you expect? A Tack Weld machine hook up to some soldering reactants and shiz?
These aren't hooking up LV, MV and HV circuits to a house or something just your typical 3.3V-5V running at few amps or so.
@@rickytorres9089 LMAO if you only knew how idiotic you sound
@@kennmossman8701 trust me, not the worst. The conections work.
@@designsbyphilip510 faint praise indeed. do they indeed work? there is no heat damage? the connections are reliable and robust? there are no cold solder joints? really? Wiping your butt with leaves also works but is hardly desirable.
Which sensor did you use for the tea cooler.
Awesome👏👏
Plz spoort my channel plz #WIKNOTEC
Ja het is Awesome
@@wendyvanaar2565 pls spoort my channel plz
So beautiful idea nice sharing 👍👍👍❤❤
ruclips.net/video/4-6Ff4GBHow/видео.html
in the first projects how did the led turn off?
Have you gotten an answer to this question?
Saya dari indonesia 😇
Ahhhhh of course I have all of this just lying around.
ruclips.net/video/4-6Ff4GBHow/видео.html
Thanks for the ideas! I hope you can try using our silicone wires in your next tutorial videos 🤩
um nononono lmao - That does not mean the water is safe my man 5:00
We all have that but we cant do 😂
Don't use continuous video show component name, capacity & range.......Thanks
nice
i feel sorry for the snail tho :(
All videos are great
yes i am finally first
No
And me 777 😂✌🏻
@@ztry9770.official i was first
Plz spoort my channel plz #WIKNOTEC
Maybe these inventions work, but aesthetics, soldering and overuse of hot glue make them look awful.
Malayali undo😌
12:07 mmm yes manual hamster labour
Pov : you see a comment with 3 replies, when u clicked on it, its only 1 reply 😂
what sensor in the "Tea cooler" can you please tell me.
7:38 It's very badd
They copied it from DIY Perks
It's awesome 😘
Plz spoort my channel plz #WIKNOTEC
Burned fan Craft has watched more than 10 times😂
No
ruclips.net/video/4-6Ff4GBHow/видео.html
That door lock was awesome
Plz spoort my channel plz #WIKNOTEC
@@wiknotec423 we subscribe if u give your best
@@hiresh188 ok
@@hiresh188 I am new creator
I make for amazing ideas and crazy diy ideas I am born for creative ideas
Hi! Thanks For this channel.
Please help! How to dismantle radio on mini portable cd player? The cd player powered is by double AA batteries. Im super curious. Thanks
2:43 which board is used
the soldering iron dint work for me
Good video
A narrative would have been better than this.
most of these things will break your stuff and waste money, the make these thing because they know nobody has the right stuff to do such things. but the toilet sensor is a nice idea
4:57 NO! it's not safe to drink!
সুন্দর হইছে
This video is very useful
can anyone tell me how @ 1:16 the light(in the toilet) is connected to the motion set before the lamp (hung above)? is it bleutooth or does the lamp keep connection? is the remote switch the one from the lamp initially or is it a duplicate?
anyone who can explain this one in a bit more detail
ruclips.net/video/4-6Ff4GBHow/видео.html
ruclips.net/video/4-6Ff4GBHow/видео.html
Both sensor and light have battery and both of them are connected by radio frequency (rf)
whats the brown stuff that looks like soy sauce when you solder the ciecuits?
Why are we killing snails lol
Beautifull sharing
The slug one Is cruel
I really like this is neat 🎊🎉🎊✨🌟✨✨✨
ruclips.net/video/4-6Ff4GBHow/видео.html
ruclips.net/video/4-6Ff4GBHow/видео.html
Timestamps:
0:08 Tea cooler
1:16 DIY lamp
2:25 Portable charge
3:30 DIY conditioner
4:06 Water purity meter
5:05 Building lighter
5:32 Toilet lighter
NOTE- I have not made this by myself. It is same as that of description
Thanks for reading.
ruclips.net/video/4-6Ff4GBHow/видео.html
they are not using their own soldering iron
0:19 what is that component's name
Don't ask these types of questions because 5 minutes craft thinks he is a big company he won't reply you
@@ultraultralegend9110 yes
Why is this called 5 minute crafts men?? I am a girl and I love tech stuff.....
I also love tech stuff but i am a boy
Craftymusic its called five min men because mens do more tech stuff
kindly show the name of each craft and components name. Otherwise its not usable to watch.
#letsmake_iteasy
Superb ideas
Awesome 👍👍👍👍👍👍👍👍 bro
Plz spoort my channel plz #WIKNOTEC
As I Can See Most Either Wont Work Like All Of The Phone Charging Circuits Also The Water Tester Is Only Testing For Salinity Not Bacteria and also almost every other Then Things like the tea cooler and the toilet light wont work since they have been soldered badly and also use no resistors
,is it really important for a toilet bowl to have RGB lights?.,
Maybe a crash course proper soldering ;-)
supiri ayya
You have watched the inventor 101 😂 make your own
That laser is going to blind someone and FFS buy some GD 9v battery clips SMH...
I could not find any of thesse things in my house anywhere
Good
I liked your channel
Please use a diode for the charging circuit it has polarity ang your generator can be run on reverse hehe
what is the name of dirty water testing board
oil companies don't want you to see this video...
Your really funny, they aren't gonna bat even an eyeLASH over some milliamp hours. They got things like electric cars and such to "worry" about. Then again Elon Musk did buyout oil reserves and shiz...
@@rickytorres9089 I was sarcastic, I just thought it was hilarious that like 5 or more ideas were useless green energy creations
@@danubian_ Thank you very much for caring to explain this to me so I am able to understand. :)
Though I do not think them as "useless", any repurposing is often better than tossing those devices in the trash. Just because they were previously non operational.
6.58 woww khabby lame level op✓✓
And who said we dnd need a light in closet its help us to see what we put inside closet 😂😂
ruclips.net/video/4-6Ff4GBHow/видео.html
Wow so cool 😳 😎
Good 5menit 👍
4:38 which is the computer used pls reply fast
Muy bueno
Nice
What is that in 📌🖱️ 5:39
6:20 как легко обосраться в 3 часа ночи
ruclips.net/video/4-6Ff4GBHow/видео.html