Great job. Just finishing my ICF pool. We sell the product but i never knew how good they are for pools till i checked into and did my own. Time and money saver!
Really cool and looks much easier than anyone expects :p however couple questions as I plan to do similar in my garden: 1. Did you need to pour a cement slab under the pool or just compressed the ground and covered by foil? 2. Did you need additional vertical rebar in the footing or did the ICF contain rebar that you just pour cement in and fill till the top?
Hi Hani, I did not pour a cement slab under. as you mentioned I did compressed the ground and insulated the bottom with a insulated blanket....the foil you see. As for the rebar I installed some in the footing and in the ICF wall with some going from one to the other. the walls have vertical rebar every 16 inch and horizontal every 18 inch. good luck with your project.
I wanted to parge but feared it would crack, crumple and create sharp edges behind the liner. I have not notice compression dimples maybe because of the felt liner I installed between the liner and wall.
Salut Christian, vraiment belle job! Quelques questions; as-tu mi un blue skin à l'extérieur de ton ICF pour imperméabiliser? As-tu mi un drain français autour de la piscine? T'es de quel coin? As-tu donné une pente à ton sable à la jonction des murs et du plancher de la piscine? Merci pour tes conseils.
What liner did you use and curious on how you figure out the dimensions on digging so the liner fits the walls like what was inside measurements and depth thanks so much looks so awesome
99% of inground pool liners are made on custom measurements. I just built the pool and after measured it and had a custom liner ordered for it. 14x28x54inch
Yes you do need to be a certified installer. I dont have a link for the distributor but a quick internet search and you should be able to find someone local.
Hi Christian. Awesome job, i would imagine the kids are happy. I'm going to attempt the same project. Couple of questions. I assume that white plastic or fiberglass at the top of the icf is a pool coping I can order from an online pool parts distributor and did you just screw it to the plastic ribs of the icf? Also what is the material you put on the walls under the liner? I was thinking about pouring the floor but It would save a lot of money and effort to just compact sand I suppose. Really appreciate you responding to questions. Thanks
Hi Maddalena, yes I just compacted sand for the bottom and have no issues with it. As for the wall coverings before the liner I used a protective barrier sold from a pool supply store for above ground pools to protect the liner from the bottom sand. for the pool coping I fabricated a metal plate to hold it on the wall. Good luck with your project!
Hey there, I love the finished product! I've been looking into doing the same thing. A couple questions. How does it hold up in Canadian winters? How did you finish the top? Do you need some sort of coping to secure the liner to? Is the styrofoam dense enough to withstand feet and hands pressing against it? Did you fill and pack the bottom with sand or concrete? I'm sure I have a lot more questions! Thanks for sharing your video. It looks great.
I am about to take the cover off for the first time after winter so if I dont post anything about it its probably fine. I did use coping to secure the liner and there is no problem with feet and hands pressing against it. Sand on the bottom.
That is the million dollar question. I came up with a solution due to the lack of information and help form suppliers. I could not find anybody to help me with this so I tried something I invented and am waiting to see if it last before telling people how I did that. I hope you understand.
Josh, I have professionally built these in Norther Michigan aka tip of the mit and UP. the ICF's for the pools maintain the heat as it is an R-19 rating and in ground unless your venal liner then its a full R-32 it is not as much the heat loss as the recovery time for your heater. but that being said they are great.
This is great did you have to buy special hardware for the pool? Meaning liner skimmer, pluming? This could not have been easy to explain to the seller of the pool equipment. Who did you buy these products from?
Thanks. unfortunately, Nudura had very limited info on how to do this project or how to build a pool using there product. I would have gone with radiant heat its a great idea but was on a limited budget.
Can I pay you to build a pool in my small backyard? Companies want 30-38k estimated for only a 6’ by 20’ pool, only 4 feet deep. I wish I could do it myself but don’t know anything about excavating, concrete, or plumbing, etc.
When you determine the depth at 54 is that measured at the bottom of sand to where the liner gets snapped in and also since the walls are foam due they dent real easy if you push of the wall with your feet or if they get bumped with a knee or something just curious starting my pool project in less then a month
thats exacly how I measured it but should have measured it to the top of the finish pavers so that it would be easier to source a ladder that fits...above ground pools ladders are easier to find. no issues with dents havent notice any and pushing off with my feet is my favorite thing to do... good luck with your project.
I’m a logix ICF franchise owner and plan on doing a pool at my new place this spring. I plan on doing the in floor heat. How is yours without? Did you put in a heat pump? Is going to the local pool stores in town helpful on getting liners and pool equipment??? I see in a comment a lot of materials were purchased online. Could you show/provide links? Great video!!!
Hi Jon my pool is great without a pool in the summer but I will get a heat pump this year for the shoulder seasons. As for local pool stores most of the parts or supplies were more expensive and around here they were not forthcoming with information and very negative with there comments saying things like its never going to work. why go through the hassle just buy a kit. As for materials I just googled pool supplies and got stuff from a few different sites I don't really trust them to promote. I am sure you will do fine. Good luck and thanks for watching.
Great job. Just finishing my ICF pool. We sell the product but i never knew how good they are for pools till i checked into and did my own. Time and money saver!
aWEsome thanks so much for the video
You bet!
Really cool and looks much easier than anyone expects :p however couple questions as I plan to do similar in my garden:
1. Did you need to pour a cement slab under the pool or just compressed the ground and covered by foil?
2. Did you need additional vertical rebar in the footing or did the ICF contain rebar that you just pour cement in and fill till the top?
Hi Hani, I did not pour a cement slab under. as you mentioned I did compressed the ground and insulated the bottom with a insulated blanket....the foil you see. As for the rebar I installed some in the footing and in the ICF wall with some going from one to the other. the walls have vertical rebar every 16 inch and horizontal every 18 inch. good luck with your project.
Amazing Job Christian, how did you secure the coping/pool liner track to the finished edge on the top of the ICF?
it complicated to explain but basically, it's poured into the concrete with a steel footing.
Great work, it’s beautiful, very inspiring. TY.
Thank you! Cheers!
Did you have trouble with the 90 degree corners and the liner?
How did you install the liner track to the icf blocks?
Thanks and great job, starting my 20'x40' in two weeks
I have an other video explaining just that. its on my channel. good luck with your project.
Th 0:03 thankyou great video. Love the pool
thanks
How have the walls held up behind the liner? Would you consider parging the wall foam to help prevent compression dimples?
I wanted to parge but feared it would crack, crumple and create sharp edges behind the liner. I have not notice compression dimples maybe because of the felt liner I installed between the liner and wall.
Great work. I can't wait to hear about how much heating costs are..
I am adding a heat pump this year and plan on making a video at the end of summer.
@@Vienneau please do!!
Salut Christian, vraiment belle job! Quelques questions; as-tu mi un blue skin à l'extérieur de ton ICF pour imperméabiliser? As-tu mi un drain français autour de la piscine? T'es de quel coin? As-tu donné une pente à ton sable à la jonction des murs et du plancher de la piscine? Merci pour tes conseils.
Non pas de blue skin. mon terain est sableux mais un drain francais est pas une mauvais idee. sud-est NB. pas de sable a la jonctiondes mur.
did you use a "stinger" to make sure there were no voids in the concrete?
yes, a pencil tip vibe.
What liner did you use and curious on how you figure out the dimensions on digging so the liner fits the walls like what was inside measurements and depth thanks so much looks so awesome
99% of inground pool liners are made on custom measurements. I just built the pool and after measured it and had a custom liner ordered for it. 14x28x54inch
Sorry to bother you I’m gonna go this route was curious on how much a custom liner cost you or is it worth to get a standard liner
How much did this cost you to build?
I did a video on just the cost you can find it on my channel. thanks for watching.
how did you get the liner to stay in place ?
I used pool coping.
What are the pavers you used? And did you glue them to the cement in the forms or how are you keeping it in place?
Hi Cody, yes I did glue them to the top of my wall. they are not pavers they are patio slabs but pavers would do the same thing.
Great work any after thoughts ??? What did you do for the floor????
It turned out great and we love it. I just put sand and a liner from a online pool company. same as they do for above ground pool.
Thanks what core icf ???? 6 or 8 inch ???
@@kevinkevin9448 6inch
Thanks for reply keep posting
Where do you buy the liner and is it custom fit?
most inground pools have custom liners you can get them from most online pool supplies stores
Awesome!
Comment tu as organisé les pipes pour la pompe?
J'ai simplement passer les pipes avant de faire couller le béton.
What was the outside dimensions was the 14x28x54 the inside thanks again
14x28x54 is inside wall are 12inch thick with 6 inch concrete inside
What size blocks did you use 8x8x12
I’m sorry you didn’t use blocks you used the other stuff my bad thanks again for the reply
Hi Christian Amazing Job!!! Can you share where did buy the liner ?
discount pool supply. com or pool supplies . com both can supply you with something decent
Looks awesome, if you don't mind what is the ballpark cost for the build
15k cad
Where did you buy the nudura icf from? Can you provide a link? Do you need to be a licensed contractor to purchase it?
Yes you do need to be a certified installer. I dont have a link for the distributor but a quick internet search and you should be able to find someone local.
Hi Christian. Awesome job, i would imagine the kids are happy. I'm going to attempt the same project. Couple of questions. I assume that white plastic or fiberglass at the top of the icf is a pool coping I can order from an online pool parts distributor and did you just screw it to the plastic ribs of the icf? Also what is the material you put on the walls under the liner? I was thinking about pouring the floor but It would save a lot of money and effort to just compact sand I suppose. Really appreciate you responding to questions. Thanks
Hi Maddalena, yes I just compacted sand for the bottom and have no issues with it. As for the wall coverings before the liner I used a protective barrier sold from a pool supply store for above ground pools to protect the liner from the bottom sand. for the pool coping I fabricated a metal plate to hold it on the wall. Good luck with your project!
@@Vienneau Hi Christian, how did everything hold up over the winter?
@@maddalenadicristofaro189 perfect no issues at all.
Hey there, I love the finished product! I've been looking into doing the same thing. A couple questions. How does it hold up in Canadian winters? How did you finish the top? Do you need some sort of coping to secure the liner to? Is the styrofoam dense enough to withstand feet and hands pressing against it? Did you fill and pack the bottom with sand or concrete? I'm sure I have a lot more questions! Thanks for sharing your video. It looks great.
I am about to take the cover off for the first time after winter so if I dont post anything about it its probably fine. I did use coping to secure the liner and there is no problem with feet and hands pressing against it. Sand on the bottom.
@@Vienneau how did you secure the coping at the top?
That is the million dollar question. I came up with a solution due to the lack of information and help form suppliers. I could not find anybody to help me with this so I tried something I invented and am waiting to see if it last before telling people how I did that. I hope you understand.
@@Vienneau Love to see the details. Having seen your other work I have faith in you.
Josh,
I have professionally built these in Norther Michigan aka tip of the mit and UP. the ICF's for the pools maintain the heat as it is an R-19 rating and in ground unless your venal liner then its a full R-32 it is not as much the heat loss as the recovery time for your heater. but that being said they are great.
It’s been over 2 years, does it leak?
No Leaks still great.
Perfect
This is great did you have to buy special hardware for the pool? Meaning liner skimmer, pluming? This could not have been easy to explain to the seller of the pool equipment. Who did you buy these products from?
it was actually pretty easy... the suppliers were very helpful. most of the equipment was actually ordered online.
Great project. Did Nadura help you design? And did you consider radiant heat for bottom of pool?
Thanks. unfortunately, Nudura had very limited info on how to do this project or how to build a pool using there product. I would have gone with radiant heat its a great idea but was on a limited budget.
@@Vienneau what was your budget? It looks great! I’d love to see your budget break down.
I Don't have a budget break down but we were estimating 12k for the pool and 5k for landscape. We stayed pretty close to budget.
How so you didn't to a concrete floor?
Tnx
Price$$$
On what web site did you command your ICF ?
Merci beaucoup pour toutes les réponses précédente elles me sont bien utile
Hey Julien, je l'ai acheter d'un distributeur local mais il faut etre certifier come installeur pour acheter.
@@Vienneau j'allais poser la même question 😅... Donc si je veux acheter ça, je ne peux pas si je ne suis pas certifié?!
@@lukeasselin3214 je suite entrain de faire un video qui explique en detail... je post dans pas trop longtemps.
Can I pay you to build a pool in my small backyard? Companies want 30-38k estimated for only a 6’ by 20’ pool, only 4 feet deep. I wish I could do it myself but don’t know anything about excavating, concrete, or plumbing, etc.
I would love to build stuff for a living but am too scared to go in business.
Nice job
thanks
When you determine the depth at 54 is that measured at the bottom of sand to where the liner gets snapped in and also since the walls are foam due they dent real easy if you push of the wall with your feet or if they get bumped with a knee or something just curious starting my pool project in less then a month
thats exacly how I measured it but should have measured it to the top of the finish pavers so that it would be easier to source a ladder that fits...above ground pools ladders are easier to find. no issues with dents havent notice any and pushing off with my feet is my favorite thing to do... good luck with your project.
Overall cost?
I have a video coming out soon explaining the cost. but around 17K
great work. how long did this take?
for the pool, almost 2 months with the landscape 3 to 4 months. But this was mostly done by myself.
I’m a logix ICF franchise owner and plan on doing a pool at my new place this spring. I plan on doing the in floor heat. How is yours without? Did you put in a heat pump? Is going to the local pool stores in town helpful on getting liners and pool equipment??? I see in a comment a lot of materials were purchased online. Could you show/provide links? Great video!!!
Hi Jon my pool is great without a pool in the summer but I will get a heat pump this year for the shoulder seasons. As for local pool stores most of the parts or supplies were more expensive and around here they were not forthcoming with information and very negative with there comments saying things like its never going to work. why go through the hassle just buy a kit. As for materials I just googled pool supplies and got stuff from a few different sites I don't really trust them to promote. I am sure you will do fine. Good luck and thanks for watching.
Morning Sir,how much did the ICF it self cost please ?
I believe it was about 60$ for a strait piece and 30$ for a corner. something like that. a strait piece is 8ft x 18inch.
@@Vienneau so sorry Sir in total how much did you spend in ICF cost only total?
Around 2k
Can you give me a rough estimate on how much you spent on the ICF blocks trying to see which way I wanna go with my pool thanks again
3k ish
@@Vienneau that's the info I was losing for. Thanks.
Very nice. Did you use 8” forms?
Thanks I used 6 inch forms.
Marks Crest
Rebeka River
Brayan Crest
Kertzmann Canyon
Tremblay Road
I think all ICFs should be made of recycled and/or all natural and sustainable materials.
That would be nice.
Why?
Hermann Island
Terrell Squares
Lind Squares
Bottom is where the heat loss is
I agree next time I change the liner I will add insulation.
Jessy Extension
Maynard Locks
Isac Brooks
Gino Crescent
Otis Roads
Lynch Island
Delilah Mountains
Amaya Trace
Spinka Spur
Klein Mission
Nice. check my step by step diy construction videos. Im building infinity pool without skimmer
Ehh
How did you attach the liner track to the ICF ?
I fabricated a piece that holds it to the ICF.
@@Vienneau I'd like to see that.
Nice job
Thanks
Overall cost?
watch my Q&A video there is a cost break down in that video.
ruclips.net/video/CNqmbcg8DRc/видео.html
Sigrid Manors