Very helpful this video. Thank you so much. Whenever I load material in my graphtech ce6000-60 and hit 1 for media front edge, it roll back and the media fall off. Will somebody tell me why is that please. Thanks in advance !
The CE6000-60 user manual reads: Confirm that the push roller is steadily on the media within the range of media movement. This adjustment is based on assumption that media is slightly tilted. Media might fall off if the tilting of the media is too large. Let me know if you still have trouble! www.graphtec.co.jp/site_download/02_manual/data/CE6000_UserManual(CE6000-UM-154).pdf -TRW Bri
You're doing great, I'm sure. This is for sure a commitment, but you'll look back very soon and be amazed at how far you've already come. :-) -TRW Crystal
Hey Matt. I'm having trouble with my Graphtec CE6000-40 I keep getting an E01019 code. I've been doing a little research and I've found that it could either be my main board or clean my sensors? Does this issue sound familiar. Thanks
Everything I can find on that error says to try resetting to factory settings. We demonstrate how to do that early in this video: ruclips.net/video/lvGvW4jHFbw/видео.html -TRW Bri
@@TheRhinestoneWorld So I found that when I turn my sensors off my cutter works and I get error code, so i'll have to use this feature all the time since my sensors are gone. :( I wonder if this something I can change and fix myself. I know those sensors are important.
HI, once the cutting job is done the plotter slowly rolls the whole media to front and once it reach the end point of the front media it rolls back and throws the media from tha back side at an insane speed. can you tell me why this happens ?
Give us a shout at: Phone: 941-755-1696 · Customer Service: info@therhinestoneworld.com. We have the ability to remote onto your computer temporarily and see if we can work out the issue. -TRW Crystal
Is the CE6000-60 or CE7000-60 capable of cutting 23.183” in width? I know it’s cutting it close because it’s a 24” cutter but that’s the size I need to cut and want to make sure. Thanks!
CE7000 Series - Graphtec America Inc.www.graphtecamerica.com › ce7000 Cutting area of guaranteed accuracy(W x L) (when using the basket). 14" x 79". 23" x 79". 50" x 79" ; Mountable media width, 2" 19", 2" 30", 2" 54" And ----- CE6000-60 PLUS Cutting area of guaranteed accuracy(W x L) (when using the basket) 1 ft 11 in x 16 ft 4.85 in (584 mm × 5 m) (*1) Mountable media width Min. 1.97 in to Max. 28.03 in (Min. 50 mm to Max. 712 mm) -TRW Crystal ******Did you know? >We're LIVE -- EVERY Monday night at 8pmEST on our RUclips channel! >>We TEACH how to use our products, have some pretty awesome GIVEAWAYS (Even Cameos!), and if you hit subscribe (FREE!), it will open up the chat option during the live. >>>You can hang out, ask QUESTIONS and have FUN as we go! >>>>We also offer tiers of paid MONTHLY subscriptions that have a variety of PERKS, sneak PEEKS, extra TRAINING, free DESIGNS, first DIBBS on new products, extra COUPONS, and FONTS all depending on the tier level selected!
I have a Graphtec lite CE 50 and using silhouette software. When I create the design the plotter goes off scale at the point of cutting . It’s driving me insane! How do I alter the scale setting !
Hey there! I think you could benefit from a one on one chat with one of our Technical Support Reps! Give us a call at 941-755-1696 for assistance on this matter. - TRW Haley
I would try reaching out to Graphtec's customer service for support and to see if your machine is still under warranty if they diagnose an issue. -TRW Crystal
la graphtec pune ambele roti pe partea din dreapta unde e dunga mai mare + extend + disable load sensor si o sa mearga, ai grija sa nu lasi senzorul disabled
We don't have any extra parts or discs that come with the cutters, but the user manuals are online and might be in the FAQ section on site. :-) -TRW Crystal
Give us a shout at: Phone: 941-755-1696 · Customer Service: info@therhinestoneworld.com. We have the ability to remote onto your computer temporarily and see if we can work out the issue. -TRW Crystal
Happy you liked it! We have a team especially for social media comments now, and we wanted to reach out and say thank you for being part of the Crew, and that we're here for any questions you might have. If you're still following - awesome! If not, we'd love to have you back! We go live every Monday night, 8pmEST on our channel with free training and we still do giveaways! (To join, hit subscribe and during the live that opens a Live Chat button!) Hope to see you there! -TRW Crystal
Hope the last few years have treated you well! We have a team especially for social media comments now, and we wanted to reach out and say thank you for being part of the Crew, and that we're here for any questions you might have. If you're still following - awesome! If not, we'd love to have you back! We go live every Monday night, 8pmEST on our channel with free training and we still do giveaways! (To join, hit subscribe and during the live that opens a Live Chat button!) Hope to see you there! -TRW Crystal
Omg! I could totally hug you right now! I was about to toss all my scraps because I hate using my mat and this tutorial was amazing!!!! Thank you!!!!!
Thanks for watching, Ralonda!! We're so glad the video helped you 🥰️
- TRW Haley
Very helpful this video. Thank you so much.
Whenever I load material in my graphtech ce6000-60 and hit 1 for media front edge, it roll back and the media fall off. Will somebody tell me why is that please. Thanks in advance !
The CE6000-60 user manual reads:
Confirm that the push roller is steadily on the
media within the range of media movement.
This adjustment is based on assumption that
media is slightly tilted. Media might fall off if
the tilting of the media is too large.
Let me know if you still have trouble!
www.graphtec.co.jp/site_download/02_manual/data/CE6000_UserManual(CE6000-UM-154).pdf
-TRW Bri
Learning as fast as I can
You're doing great, I'm sure. This is for sure a commitment, but you'll look back very soon and be amazed at how far you've already come. :-)
-TRW Crystal
OMG been wanting to know this forever...thanks!
Thank you for watching!
Hey Matt. I'm having trouble with my Graphtec CE6000-40 I keep getting an E01019 code. I've been doing a little research and I've found that it could either be my main board or clean my sensors? Does this issue sound familiar. Thanks
Everything I can find on that error says to try resetting to factory settings. We demonstrate how to do that early in this video:
ruclips.net/video/lvGvW4jHFbw/видео.html
-TRW Bri
@@TheRhinestoneWorld So I found that when I turn my sensors off my cutter works and I get error code, so i'll have to use this feature all the time since my sensors are gone. :( I wonder if this something I can change and fix myself. I know those sensors are important.
@@DJSTEFF428how to turn off sensors on CE6000-60? Please
HI, once the cutting job is done the plotter slowly rolls the whole media to front and once it reach the end point of the front media it rolls back and throws the media from tha back side at an insane speed. can you tell me why this happens ?
Give us a shout at: Phone: 941-755-1696 · Customer Service: info@therhinestoneworld.com. We have the ability to remote onto your computer temporarily and see if we can work out the issue.
-TRW Crystal
Is the CE6000-60 or CE7000-60 capable of cutting 23.183” in width? I know it’s cutting it close because it’s a 24” cutter but that’s the size I need to cut and want to make sure. Thanks!
CE7000 Series - Graphtec America Inc.www.graphtecamerica.com › ce7000
Cutting area of guaranteed accuracy(W x L) (when using the basket). 14" x 79". 23" x 79". 50" x 79" ; Mountable media width, 2" 19", 2" 30", 2" 54"
And -----
CE6000-60 PLUS
Cutting area of guaranteed accuracy(W x L) (when using the basket) 1 ft 11 in x 16 ft 4.85 in (584 mm × 5 m) (*1)
Mountable media width Min. 1.97 in to Max. 28.03 in (Min. 50 mm to Max. 712 mm)
-TRW Crystal
******Did you know?
>We're LIVE -- EVERY Monday night at 8pmEST on our RUclips channel!
>>We TEACH how to use our products, have some pretty awesome GIVEAWAYS (Even Cameos!), and if you hit subscribe (FREE!), it will open up the chat option during the live.
>>>You can hang out, ask QUESTIONS and have FUN as we go!
>>>>We also offer tiers of paid MONTHLY subscriptions that have a variety of PERKS, sneak PEEKS, extra TRAINING, free DESIGNS, first DIBBS on new products, extra COUPONS, and FONTS all depending on the tier level selected!
I have a Graphtec lite CE 50 and using silhouette software. When I create the design the plotter goes off scale at the point of cutting . It’s driving me insane! How do I alter the scale setting !
Hey there! I think you could benefit from a one on one chat with one of our Technical Support Reps! Give us a call at 941-755-1696 for assistance on this matter.
- TRW Haley
@@TheRhinestoneWorld, Thanks for the reply as it's appreciated but I live in the UK so a bit of a time difference.
hi
i have graphtec ce6000-60-- when i setting to repat cut than last edge is not cutting and menu showing processing only
plase solve this problem
I would try reaching out to Graphtec's customer service for support and to see if your machine is still under warranty if they diagnose an issue. -TRW Crystal
la graphtec pune ambele roti pe partea din dreapta unde e dunga mai mare + extend + disable load sensor si o sa mearga, ai grija sa nu lasi senzorul disabled
Multumesc pentru informatii!
-TRW Crystal
Thanks sir for the Sensor setting
No problem! Glad we could help!
-TRW Abby
Can you press a default button n bring all back to normal?
Hey Thomas! It's easy, but not quite that simple - email us at info@therhinestoneworld.com for a video on resetting your Graphtec!
- TRW Haley
how to do print and cut from ce 6000-60 ? i have a ce6000-60 machine but getting error E04017
Have you tried resetting your Graphtec? If you're still having trouble, please email us at info@therhinestoneworld.com
-TRW Bri
Thanks !
You bet! Hope this was helpful. -TRW Tanyu
"Graphtec Mark scan error not enough length in +X Direction"
Any solution to this error?
If you have time, give us a call at 941-755-1696 next time you're at your computer. We can remote in and take a look at it with you!
- TRW Haley
The video solved my issue! Thanks!
Glad we could help!
-TRW Abby
Ok I’ve had my cutter for 3yrs now and didn’t know I could shut off sensor for smaller pieces I’ve. Been tossing small scraps for decals
Awesome, glad you found that tip helpful! 😊
- TRW Haley
Although I've used this machine for 10+ years I keep learning. Thanks
Great to hear! 😁
-TRW Kait
Thank you sir 😃
You're welcome! ❤️️
- TRW Haley
Matt do you please have a GRAPHTEC CD for the CE6000-40
We don't have any extra parts or discs that come with the cutters, but the user manuals are online and might be in the FAQ section on site. :-) -TRW Crystal
Graphtec error load media any solution please sir
Give us a shout at: Phone: 941-755-1696 · Customer Service: info@therhinestoneworld.com. We have the ability to remote onto your computer temporarily and see if we can work out the issue.
-TRW Crystal
thanks
Happy to help! :-)
-TRW Crystal
tq bro
Hi
I am from 🇮🇳 India
Thank you so much buddy you solve my load media prob, you are doing good job.
You are most welcome, we're happy to help!
-TRW Crystal
thanks u do much
You're welcome! We're happy to help. -TRW Crystal
Good ask Matt thanks
Happy you liked it!
We have a team especially for social media comments now, and we wanted to reach out and say thank you for being part of the Crew, and that we're here for any questions you might have.
If you're still following - awesome! If not, we'd love to have you back!
We go live every Monday night, 8pmEST on our channel with free training and we still do giveaways!
(To join, hit subscribe and during the live that opens a Live Chat button!)
Hope to see you there!
-TRW Crystal
Hey Matt, waiting for all the trick I can get to help.
Hope the last few years have treated you well!
We have a team especially for social media comments now, and we wanted to reach out and say thank you for being part of the Crew, and that we're here for any questions you might have.
If you're still following - awesome! If not, we'd love to have you back!
We go live every Monday night, 8pmEST on our channel with free training and we still do giveaways!
(To join, hit subscribe and during the live that opens a Live Chat button!)
Hope to see you there!
-TRW Crystal